Enable s-video and/or multiple displays on ThinkPad with Windows 7

I have a T41 Think pad notebook. I now have Windows 7 Professional 32 bit.
I want to use the s-video output to transfer video to a TV and watch it there.
I connect the s-video cable but cannot find how to get the s-video output enabled or get a second monitor if that is the way to do it. When I start the computer it does not note a second monitor and cannot find one with checking screen reolustion.
Going to Lenovo Thnkpad support there are help areas that say to go to display properties and walk through the steps to add a 2nd monitor on the settings tab and also use the special driver for my ATI Radeon 9000 card to enable the s-video. In windows 7, unlike XP, the adapter is a generic display adapter and the display a generic vga display and does not have the ability to use the old settings tab from prior Windows or the ATI driver special settings. I tried to get the newest driver from Radeon but it is now very generic too and when I try to install it I am told it will not work, so I am uncertain how to update my display driver and get more than the display being recognized as a generic plug and play vga monitor.
How do I get to a second monitor and/or enable s-video?
Nothing seems to happen when I plug in the s-video cable.
Using the function key plus F7 used to be how to get output to a projector or display, etc. with Windows XP. This does not seem to do anything now when you attach the s-video. Of course I had to wipe the drive when I upgraded. Is there some Lenovo software I am missing?
I do not see the s-video port listed as a device in the device manager as I was going to try to test it.
I understand how to connect the cables and have them so the sites that sell cables for connections have been no help as they do not say much about Windows 7 except update your display driver.
I tried to connect the s-video, right click on the desktop, select screen resolution, try to detect the other monitor, all as described in the “Guided Help Dual Monitor Setup is easy in Windows 7” but there was no detection and no change.
Any ideas?
Thanks.

What is "Adobe X" / "Adobe XI"? Reader or Acrobat?
P.S. a screenshot of what you see would be helpful: https://forums.adobe.com/thread/1070933

Similar Messages

How to set up and use multiple Ext HD compatible with Windows w/o emulating

I am in deep doodle and confused, sit down and get a cup of coffee cuz is going to be loooooong.
I need some suggestions for my present situation. I have posted a similar question but I only got partial answer and I need to complete this task.
I migrated to my Mac from Windows, and I still have a Windows XP laptop. At first, I formatted my Ext HD as FAT 32 but I noticed that it was too slow. I was suggested to reformat the drives back to Journal. However, recently I had to replace my internal HD and backed up all my data to several Ext. HD. Oh brother what a mistake, while my Mac was at Apple I couldn't get access to my files using my Windows XP laptop because all drives were formatted as Journal (only for Mac).
At the moment, I have the following:
1- Seagate (350 GB orig)- complete back up images 110 GB avail
2- Maxtor ( 500 GB orig) - " " second copy 330 GB avail
3- Old int w/ casing(150 GB orig) 3rd copy 78 GB avail - is working but not sure if it will last, I had this DR for a long time. All 3 DRs formatted as Journal
4- Western Dig 1TB (new FW) 1TB avail
I realized that at the rate that I am shooting I would be running out of space on the current Drives. So I bought 1TB Ext HD FW, but I am in great need from others with more experience than me in setting up a strategy to back up and using my Ext HD. I only use the Int. HD DR 250 GB for Apps only, anything else I use exclusively my Ext HD.
So I would like to know which drive should I use as my primary one, and how I should set up the other subsequent drives as shown above. Do you think that I should reformat all the drives back to FAT 32, (what a task)? I'm also aware the 4 GB limitations. Or should I just format to FAT 32 the 1 TB, and can I partition the this drive and Format each partition with different format,ie. a couple NTFS and one FAT32.
Thanks in advance to all

You can also share a printer between the Mac/PC as well as files and mounted Volumes, see the Tiger articles here
http://www.ifelix.co.uk/tech/
You may want to use Bonjour for Windows on your PC
http://www.apple.com/macosx/features/bonjour/
Then there are VNC clients for Mac/PC that also allow you to actually control the other machine, if they aren't in the same room and you just need to check something quick that can be handy, it's kind of slow though for regular use.
The main benefit of partitioning is being able to have different versions of bootable OS on them. You can try out Leopard on a new partition, while keeping your Tiger partition intact, you can have a XP/Vista partition for parallels or BootCamp, etc... other than that drives are pretty much fast enough, having smaller partitions probably won't realize any significant speed ups over searching the whole large drive.

I can't get my Ipad to show up at all in Itunes. 1 How do I fix that and 2 Can I fix this without losing all of the videos and apps that aren't synched with my computer yet?

I can't get my Ipad to show up at all in Itunes. 1 How do I fix that and 2 Can I fix this without losing all of the videos and apps that aren't synched with my computer yet?

http://support.apple.com/kb/ts1591
http://support.apple.com/kb/TS1538

Using CSS and Javascript to display a div with flash in it, mozilla reloads the flash file!

I am using CSS and Javascript to display a div with an
embedded flash object in it. Mozilla Firefox reloads the flash file
when the div is displayed! (I dont want this to happen, as it's
unexpected functionality, my expectation would be that the flash
file would not change it's state at all, and would remain in
whatever state it was left in.)
I was wondering if anyone has come across this issue and is
there something I can do to prevent this from occurring?
To be more specific, I have a single HTML page with 8 flash
files embedded in it (yeah I know, it's a bit much). I am then
using CSS and Javascript to display (via a numbered link (with an
id)) an equivalent numbered div tag containing the flash file.
Mozilla Firefox reloads the flash object that is in the div.
Internet Explorer will not do this and will instead, load the flash
object only upon initial view of the flash object. All subsequent
links (in IE) will NOT reload the flash object on the page. I'm
guessing this is some kind of difference in the flash player as an
Active X object and the plugin, or is it just IE being clever? Or
am I way off?
Anyway, here is the code...

I am using CSS and Javascript to display a div with an
embedded flash object in it. Mozilla Firefox reloads the flash file
when the div is displayed! (I dont want this to happen, as it's
unexpected functionality, my expectation would be that the flash
file would not change it's state at all, and would remain in
whatever state it was left in.)
I was wondering if anyone has come across this issue and is
there something I can do to prevent this from occurring?
To be more specific, I have a single HTML page with 8 flash
files embedded in it (yeah I know, it's a bit much). I am then
using CSS and Javascript to display (via a numbered link (with an
id)) an equivalent numbered div tag containing the flash file.
Mozilla Firefox reloads the flash object that is in the div.
Internet Explorer will not do this and will instead, load the flash
object only upon initial view of the flash object. All subsequent
links (in IE) will NOT reload the flash object on the page. I'm
guessing this is some kind of difference in the flash player as an
Active X object and the plugin, or is it just IE being clever? Or
am I way off?
Anyway, here is the code...

I deleted over 200 self taken videos and over 500 pictures in the Moments window in my photo tab. They deleted but still show in my setting in the About window and I haven't gained any additional storage capacity. What do I do now?

I deleted over 200 self taken videos and over 500 pictures in the Moments window in my photo tab. They deleted but still show in my setting in the Setting/About window and I haven't gained any additional storage capacity. What do I do now? Please help! Thanks in advance for any assistance!!!

Check the Recently Deleted album. Deleted photos will reside there for up to 30 days. This allows all those people who accidently delete photos to recover them, something they couldn't do before. To actually free up the space you might have to delete the photos in the Recently Deleted album.

I am trying to import video and the audio doesn't upload with the video. Help.

I am trying to import video and the audio doesn't upload with the video. Help.
I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB). The video imports but not the audio, what do I do?

What are you capturing from? You may not hear the auido as it's captured but it will be there. After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip? If so then go to "View" then "Audio Playback" and set it to 'Built-in Output" if you're monitoring audio through the computer.

Problem occurring when opening and saving files in AI SC5 with Windows 7

Hi, I ‘am a Graphic Designer and first time working in UAE Windows 7 is basically the only OS here. My PC is:
HP Elite 7000
Intel® Core™ i5 CPU 2.67GHz
4GB RAM
32-bit
Now to the problem, not that knowledgeable in IT stuff so here goes:
1. Problem occurring when opening and saving files in AI SC5 with Windows 7. (You will actually see a “Not Responding” word coming out while opening and saving files, whether small or large files)
2. Locked layers occasionally are moved accidentally.(Working on multiple layers is normal so we need to lock it specially the once on top. But there are times I still manage to select locked layers)
3. After typing and locking the text, pressing “V” for the arrow key shortcut is still added to the text that is locked. (After typing I lock the text layer with my mouse and Press “V” to activate the arrow key… yes the arrow key is activated but the text is still typing the actual keyboard pressed)
I’ve only use the brand new PC and installer for a month now. Not sure if this is compatibility issues or something else I’m not aware of.
Thanks in advance to people that will reply.
Cheers!!!

Well I’m still wondering if it is compatibility issues because I’m also having problem with Photoshop CS5. These 3 are all bought at the same time (PC, Illustrator and Photoshop installers). The problem I’m having in Photoshop is not that too important, every time I Ctrl+O to view files, all PSD are shown in white paper like icons, no preview, and saving as well.
Or I just purchased a corrupted or pirated installers… Adobe updates are done every time I’m prompted.

Have access to a friends computer with CS3 installed. I am going to buy a desktop with Windows 8 and I also have a laptop with Windows 7. What version of Photoshop is currently available that will work on both the desktop and the laptop? Can I install th

Currently have access to a friends computer with CS3 installed.I am going to buy a desktop with Windows 8 and I also have a laptop with Windows 7. What version of Photoshop is currently available that will work on both the desktop and the laptop? Can I install the same copy of Photoshop on the both machines simultaneously?

You can either buy a CS6 perpetual license, or Creative Cloud subscription. Both will run on the two computers you mention. You are allowed two installation with either version, but they must be for the same user. There is a cheap as chips Photography deal that gives you Photoshop and Lightroom for just $10/month, and feature gap is ever widening between CS6 and CC

I purchased Illustrator 8.0 on ebay and apparently it is not compatable with windows 7, is there anything I can do to use this program?

I purchased illustrator 8.0 on ebay and apparently it is not compatible with windows 7. Is there anything I can do to use this program?

Beverly,
Yes.
You may need to run the computer in XP mode to install it (you may try in normal mode first). Here is how:
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
Once installed, you should be able to get it to run with the PC in normal mode as follows (first run):
1) RightClick the shortcut;
2) Click Properties;
3) Click Compatibility;
4) Tick Run this program in Compatibility mode for, then select XP in the dropdown list;
5) Start AI8.
After that, you can just DoubleClick the shortcut.
Hopefully, you bought it legally (with a genuine, non registered serial number, or had a licence transfer).

HT201302 How to importing personal photos and videos from iOS devices to my computer with Windows 8?

myHow to importing personal photos and videos from iOS devices to computer with Windows 8?
Nothing indicating iPhone 4s folder for images and videos in Win 8 anymore after plugged in USB cable to PC with the iPhone 4s. Nothing pop up anymore asking if I want to backup photos / videos to my PC (used to pop up in Win 7).
Where can I find this folder in iPhone 4s?
Thks!!

You can do it via your computer's iTunes. If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

TS1717 My iTunes kepps freezing and changing my display seetings on my Windows 7

Why is iTunes download changing my display settings for my Windows 7 and not working correctly?

This is ppfaceannagrace, the question asker. I had to clear up one thing or the many things that I should make more clear. Sorry I didn't proof read, or run spell check.
I wrote When I wrote my, "My book is written on Microsoft words not Microsoft word". I meant I worte part of the book on Microsoft Works NOT Microsoft Word! Thanks for taking time to read *hopefully at least the part where I ask the question* If not the other longer, less, or really not at all important info.

How can I add multiple folders to iTunes with Windows 8?

I have windows 8 and the latest version of iTunes on Windows 8. How can I put multiple folders of music onto iTunes

Enable the menu bar with Ctrl+B. Then use File > Add Folder to Library.
tt2

I need help getting my Thunderbolt display to work with Windows 7 through Bootcamp.

I recently bought a thunderbolt display and it works great in my Mac environment. But I recently added Bootcamp and Windows 7 (I need since my Broker Dealer only uses Internet Explorer). Unfortunately, I can't seem to get Windows to recognize my Thunderbolt display. Today, I spent 2 hours with a very kind advisor from Apple Support but we didn't have any success.
Here's my setup:
MacBook Pro (purchased new in 2011) with i7 processor
Thunderbolt Display
Lion OS (all updates installed)
Bootcamp with Windows 7 Ultimate 64-bit (all updates installed)
With the help of Apple Support, I downloaded and reinstalled (through the repair option) all the Bootcamp drivers. I shut down my computer, plugged in the Thunderbolt display, turned it on and booted into Windows 7. When the Windows Welcome screen appears, it shows on my Thunderbolt display for about 2-3 seconds. But the thunderbolt quickly goes black. My MacBook Pro changes to a 640x480 resolution and the Thunderbolt remains blacked out--with no signs of even a single flicker. Once the computer finishes the start-up, my MacBook Pro remains in a 640x480 resolution, with no option to change the resolution (it's grayed out in Windows control panel). If I unplug the Thunderbolt cable from my MacBook pro, the high resolution of my MacBook pro snaps back to normal.
To me, this seems like some type of driver problem but I must be missing something simple because it appears that Thunderbolt works with Bootcamp and Windows 7--based on some of the readings I've found here in the Apple support community. I'm most appreciative of anyone's help here.

Moving the discussion to OnLocation
Thanks,
Atul Saini

Using iMac as display from Mini with Windows 7

Have a Mac Mini with Bootcamp and Windows 7 SP1. When it was intially installed, it was attached to an iMac with a thunderbolt cable and Command-F2 worked to switch the display over. However Windows on the Mini then downloaded and installed all the various patches, and now Command-F2 doesn't do anything. Can anyone shed any light on this?

Hello Allan,
I appreciate your response. I have read that a Mac running Windows with Bootcamp can use TDM, so I expected it would be a matter of installing proper drivers, but, unless anybody else has had some success, I think I'm about ready to admit defeat.
I appreciate you proposing a software solution, however, ScreenRecycler only supports using a Windows PC as another display, not the other way around. I did play around with a couple other software solutions, but none of these solutions would work well once my work PC is connected to VPN.
I guess I'll continue to work off a small laptop screen while a giant 27-inch screen on the same desk goes unused. Very frustrating.

Wireless keyboard and mighty mouse do not work with windows Vista

I have a new iMac core 2 duo 20" used by my granddaughter.
The drive has been partitioned using 50-50 with Boot Camp Assistant to form 2 250 GB partitions and windows Vista has been installed on one of them. The installation process runs smoothly as does the process when the OSX disc is installed for the relevant drivers for keyboard, mouse, isight camera etc. At the end of this process it is necessary to click a :"finish" button but at this point the mouse and keyboard have frozen and there is no other way of inputting information. Restarting in windows takes me to the log in page but there is no way to input the user name and proceed further.
Apple support has suggested hat I use a wired keyboard and mouse or call Microsoft support. Microsoft support have told me that they do not support Vista on a Mac.
Any suggestions would be helpful.

I had the same problem on the mac mini from my dad with windows XP.
I could install everything smoothly but when i wanted to connect the mighty mouse and a wireles apple keyboard i had the same problem.
I fixed this by using a mouse with cable and then add the keyboard and mouse via bluetooth in the configurationscreen. i had to do do this 6 times (the same thing) before it worked so maybe its the same in vista

Enable s-video and/or multiple displays on ThinkPad with Windows 7

Similar Messages

Maybe you are looking for