Enable Send Mail option in print preview
Hi,
Is it possible to enable the 'Send Mail' option in the print preview of the form output. If possible how do we do that. Please let me know.
<removed by moderator>
Thanks & Regards,
Prasanth
Edited by: Thomas Zloch on May 13, 2010 11:17 AM
Hai ,
Your can send mail using the function Module : SO_NEW_DOCUMENT_SEND_API1 , check where you need to use this function module any user exit is available for this at the time of print preview .
Regards,
K.Vinay Kumar
Similar Messages
-
EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02
Hi
I want to make active mode in send mail option is in VF02/VF03.
see below how to reach send mail option is in vf03
There is one more option if u go vf03 give the billing document and go to issue out put , choose the print preview and go to text which is placed at top right side and click on that option there send mail option available. can we make active that option since it is showing in gray mode.
Regards
VenkatVenkat,
If your SAP system's Output is configured with the proper output type and SMTP or IMAP mail sending servers then its possible to send mail directly by clicking the send email tab.
I have a little knowledge about this technical congiguration. But we have solution manager from where we send mail directly to the user's Email.
And also yu have to configure Workflow setting.
Please take help of Workflow ABAP consultant.
Thanks,
Raja -
Hi Experts,
Can any one help me in this issue.
I am sending a PDF document throught SEND MAIL option.I have written the Code.I want to DEBUG the Code which i have written
in the Print Program when I save the Document Like INVOICE means (option 4 the mail will be send when we save the Doc).
Thanks & Regars.Hi,
Could you please explain your poblem clearly..
If you want to debug your code keep a break point and save the invoce.. which will stop in your code..
If you are unable to set the external break point use BREAK-POINT statement to put the break point and then debug..
Thanks,
Rakesh -
How to define multiple recipents for send mail option
Dear all,
I am trying to send mail to multiple recipients. can some help me with a solution as we donot have orgnizational chart maintained in our organization.
also
is there some study material for how to use expression in send mail option
thanks in advance.
Best of regards,
Gaurav SoodI don't know if there is a comparable FM like SO_USER_READ_API1 that uses a table for SOUDNAMEI1. I simply create a table of SOUDNAMEI1, loop SO_USER_READ_API1 adding to recipients and then SEND.
This what you referring to?
if there is a comparable FM, let me know. I don't 'see' any in package SO's FGs.
Rick -
Send Mail Option: Deactivaton
Hello,
Present we are not using 'Send Mail' option on appointment details. Is there any to deactivate it.
I tried but didnt get through.
thanks in advance
Yujthank you.
it was sad. would it be possible for to put enhancement request for to customer care.
thanks once again.
Yuj -
Send mail option triggering mail into documents
hi
im using send mail option in the workflow definition, the mail is triggered but its going to the documents folder and not into the workflow inbox.
if i want to make the option like.. complete the work item by double clicking.
is it possible with the send mail option?
please suggest me..
BabuIt is not possible to send mail options sending workitem to your workflow. It will send the mail to your inbox i.e to Document folder. If your work involves some decision steps .. use decision task. Or else use Activity and create a task behind that.
Hope this reply helps You -
Send mail option for results printout
Hi,
I have recorded results for an inspection lot for an external sample. Now i am taking a print out for the results in QGA3. When i checked the print preview using the form QM_INSP_RESULT there is an option in tool bar in 'text' to send a mail but it is disabled.
pls let me know how to enable this
Regards,
Sravanany suggestions?
-
Hi,
I have a simple interactive form, enable the user to submit his form via mail (outlook) at the end of form filling. a after pressing the "submit by mail" button, an outlook window is open and the form content is add as an xml attachment file. the to-be -send mail message is at "plain text" format, due to technical reasons, message should be send at "rich text" format.
how can this option (i.e., "rich text") can be determine by the adobe form?
Regards,
UriHello,
Do you like the result? Or have you find anything better? Maybe you can share the result with us? That is what we do here. And please close the thread of the problem is solved. By the way... if I were you, I would earn some points or you will find troublesome to find help here when you have never helped anybody yourself.
Regards Otto -
Problem to define recipent type for Send mail option in WF
Dear All,
I am trying to create a send mail from WF.
but i am struggling to define recipent type as it shows following options
1. Organizational unit - we don not have org chart defined in our company
2. JOB - I think it is again with Org Chart
3. Position - it is again with org chart
4. work center - not applicable
5. user
when i define it it gives me error message with binding
Express
typid
addressstrings
are not defined in container
6. expression - i do not know how to use
7. Workflow initiator expression - I do not know how to use
Kindly help me to resolve this issue.
Best of Regards,
Gaurav SoodIf you choose the Recipient type is "E-Mail address", you can enter the email of the person manually to whom the email should be sent or you can still choose an expression (Container) which will have the value determined dynamically.
If you choose the Workflow Initiator, the notification goes automatically to the user who has started the workflow.
If User, you can enter the sap user id manually or determine dynamically using expression.
If expression, you can choose a container element which holds run time value.
Regarding the binding errors, you can generate the binding automatically.
Regards,
PR. -
When Scan email for junk mail, or virus's is enabled, sending mail fails
When I configure mail to scan email for either junk or virus's, i get the following in my SMTP log:
Sep 6 17:44:59 eve postfix/smtp[28412]: D60C89D66D: to=<[email protected]>, relay=none, delay=0.02, delays=0.01/0/0/0, dsn=4.4.1, status=deferred (connect to 127.0.0.1[127.0.0.1]: Connection refused)
If I disable both junk and virus's I am able to send normally
Any ideas?when I run:
ps U _amavisd
The only processes are:
PID TT STAT TIME COMMAND
3308 ?? Ss 0:01.32 clamd
3593 ?? Rs 0:03.79 clamd
I then ran amavisd, and did not get any errors at the terminal, but here are my logs
soundchristian.org /usr/bin/amavisd[7979]: Module Digest::MD5 2.36
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module IO::Socket::INET6 2.51
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Entity 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Parser 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module MIME::Tools 5.420
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::Header 1.74
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::Internet 1.74
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::SPF::Query 1.999001
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Mail::SpamAssassin 3.002001
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Net::DNS 0.60
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Net::Server 0.87
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Time::HiRes 1.86
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module URI 1.35
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Module Unix::Syslog 0.99
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Amavis::DB code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Amavis::Cache code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL base code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL::Log code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SQL::Quarantine NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Lookup::SQL code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Lookup::LDAP code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: AM.PDP-in proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SMTP-in proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Courier proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: SMTP-out proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Pipe-out proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: BSMTP-out proto code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Local-out proto code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: OS_Fingerprint code NOT loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-VIRUS code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-SPAM code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: ANTI-SPAM-SA code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Unpackers code loaded
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found $file at /usr/bin/file
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No $dspam, not using it
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No $altermime, not using it
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .mail
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .asc
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .uue
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .hqx
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .ync
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .F tried: unfreeze, freeze -d, melt, fcat
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .Z at /usr/bin/uncompress
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .gz at /usr/bin/gzip -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .bz2 at /usr/bin/bzip2 -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .lzo tried: lzop -d
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .rpm tried: rpm2cpio.pl, rpm2cpio
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .cpio at /bin/pax
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found decoder for .tar at /bin/pax
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .deb tried: ar
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .zip
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .7z tried: 7zr, 7za, 7z
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .rar tried: rar, unrar
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .arj tried: arj, unarj
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .arc tried: nomarch, arc
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .zoo tried: zoo, unzoo
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .lha tried: lha
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .cab tried: cabextract
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .tnef tried: tnef
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Internal decoder for .tnef
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: No decoder for .exe tried: rar, unrar; lha; arj, unarj
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Using primary internal av scanner code for ClamAV-clamd
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan
Aug 28 12:40:53 eve.southsoundchristian.org /usr/bin/amavisd[7979]: Creating db in /var/amavis/db/; BerkeleyDB 0.29, libdb 4.2
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: logging initialized, log level 2, logfile: /var/log/amavis.log
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: starting. /usr/bin/amavisd at mail.southsoundchristian.org amavisd-new-2.5.1 (20070531), Unicode aware
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: user=, EUID: 0 (0); group=, EGID: 0 5 80 4 9 3 29 8 2 20 1 0 (0 5 80 4 9 3 29 8 2 20 1 0)
Sep 7 16:41:17 mail.southsoundchristian.org /usr/bin/amavisd[3659]: Perl version 5.008008
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3659]: INFO: SA version: 3.2.5, 3.002005, no optional modules: DBD::mysql Mail::SpamAssassin::BayesStore::PgSQL NetAddr::IP NetAddr::IP::Util auto::NetAddr::IP::Util::inet_n2dx auto::NetAddr::IP::Util::ipv6_n2d Mail::SpamAssassin::Plugin::DKIM Razor2::Client::Agent IP::Country::Fast Mail::DKIM Mail::DKIM::Verifier Image::Info Image::Info::GIF Image::Info::JPEG Image::Info::PNG Image::Info::TIFF Mail::SPF Mail::SPF::Server Mail::SPF::Request Mail::SPF::Mech Mail::SPF::Mech::A Mail::SPF::Mech::PTR Mail::SPF::Mech::All Mail::SPF::Mech::Exists Mail::SPF::Mech::IP4 Mail::SPF::Mech::IP6 Mail::SPF::Mech::Include Mail::SPF::Mech::MX Mail::SPF::Mod Mail::SPF::Mod::Exp Mail::SPF::Mod::Redirect Mail::SPF::SenderIPAddrMech Mail::SPF::v1::Record Mail::SPF::v2::Record Crypt::OpenSSL::RSA auto::Crypt::OpenSSL::RSA::newpublickey auto::Crypt::OpenSSL::RSA::newkey_fromparameters auto::Crypt::OpenSSL::RSA::getkeyparameters auto::Crypt::OpenSSL::RSA::importrandomseed Digest::SHA Error
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3659]: SpamControl: initprechroot done
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Process Backgrounded
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: 2008/09/07-16:41:18 Amavis (type Net::Server::PreForkSimple) starting! pid(3661)
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to UNIX socket file /var/amavis/amavisd.sock using SOCK_STREAM
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to TCP port 10024 on host 127.0.0.1
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Binding to TCP port 10026 on host 127.0.0.1
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Setting gid to "83 83"
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: Net::Server: Setting uid to "83"
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: It is possible to change EUID from 83 to root, ABORTING!
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: Please use the most recent Net::Server
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)FATAL: or start as non-root, e.g. by su(1) or using option -u user
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!!)TROUBLE in preloophook: SECURITY PROBLEM, ABORTING at /usr/bin/amavisd line 7763.
Sep 7 16:41:18 mail.southsoundchristian.org /usr/bin/amavisd[3661]: (!)_DIE: Suicide () TROUBLE in preloophook: SECURITY PROBLEM, ABORTING at /usr/bin/amavisd line 7763.\n
eve.southsoundchristian.org and mail.southsoundchristian.org are the same server, with different NICs and IPs
I was thinking about upgrading to amavisd-new I found a tutorial at http://osx.topicdesk.com/content/view/138/41/
Do think that may help?
I did update clamd after my first post on this, and it looks like clamd is running, just nothing else.
Thanks -
Select-options and Print-preview of Script both in a single-screen
Hi All,
I have a requirement like the preview of a mail attachment which is in PDF format and a select-options to enter email-id's both needs to embed in a single screen.
Please reply if you have any solution..
Regards,
Sundeep.Use this fm SSFCOMP_PDF_PREVIEW,
It will preview the pdf
кu03B1ятu03B9к -
How to enable sending mail animation?
I notice that on my Mail account, when I send a message, my "Sent" box changes to "Sending" and I see a little twerling animation. But on my son's account (on the same computer) I don't see that. Is there a setting to enable that?
Thanks!I think that should be on all the time, not a setting.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourSonsUserName/Library/Mail/MessageRules.plist
/Users/YourSonsUserName/Library/Mail/MessageRules.plist.backup -
Hi Friends,
i have create an email option in my application and i have a select list item.Return value of Select list are EMAIL and INTERNAL.
i want when i select EMAIL from Select List Then Mail Should be Send .My Item Name is P81_TYPE and my code are
DECLARE
l_id number;
to_add varchar2(1000):=:P81_TO; --P81_TO (mentioned another gmail ID)
from_add varchar2(1000):=:app_user;
l_body varchar2(4000):=:P81_ACTIVITY_SUMMARY;
l_sub varchar2(1000):=:P81_SUBJ;
BEGIN
if (:P81_NOTEE_TYPE:=MAIL)
THEN
l_id:=APEX_MAIL.SEND(
p_to => to_add, -- change to your email address
p_from => from_add,
p_body => l_body,
P_subj => l_sub);
FOR c1 IN (SELECT name, blob_content, mime_type
FROM CRM_DOC_FILE where ID IN (select ID from DUMY_SELECTED_ATTCH_FILE )
) LOOP
APEX_MAIL.ADD_ATTACHMENT(
p_mail_id => l_id,
p_attachment => c1.blob_content,
p_filename => c1.name,
p_mime_type => c1.mime_type);
END LOOP;
COMMIT;
apex_mail.push_queue(
P_SMTP_HOSTNAME => '205.145.0.26',
P_SMTP_PORTNO => 25);
commit;
End if;
END;How can i do this .
Thanks
Edited by: 805629 on Dec 20, 2010 1:04 AMWhat exactly is the problem that you are facing, I don't see anything wrong with your code except for the following line
if (:P81_NOTEE_TYPE:=MAIL)It should be (extra quotes around string and changed the item name to the one you mentioned)
IF (:P81_TYPE:='MAIL')You can also remove this if condition from the code and make the PL/SQL process itself conditional. -
Hi Friends,
Please help me with the below requirement,
In SAP BI, i am working in WAD...
The requirement is,
We are customizing the standard template,
" On click of Send e-mail button ,Bookmark should be created and an e-mail client should open up with Bookmark Id in the content of the e-mail. "
Thanks in advance.
Regards,
RavishHi,
1. Ask your Basis to to configuration of SICF for broadcasting E-Mails.
2. Maintain Email ID of user in SU01.
3. Configure SCOT
4. Then check with your E-Mail server application team to configure BI server email service in there mail server.
Regards,
Sushant -
How to activate "Send mail" from print preview in ME23N
In ME23N there is a "print preview"-button that shows a preview of the PO. In the preview-windows there is a Text-menu with a "Send mail"-command, but that command is not active. How can I activate this command so that it is possible to send the PO to an email-recepient?
I have configured the smtp-functionality (SCOT++) and sending PO's as email to suppliers in ME9F works fine by choosing "Send external". But still the Send mail-option is inactive in preview-mode. Any tips?
Regards,
Thor-Egilplease maintain output condition record (MN04) as "external send"
Also make sure that you have maintained the proper email ID in vendor master
Maybe you are looking for
-
I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uni
-
Odd Shared Variable Dialog Box message
I came across some odd behavior in the dialog box while I was created a new shared variable. As I was typing in the name, I kept see a warning pop up in the dialog. It would come and go as typed. I figured out that whenever I typed a space, and thu
-
Mouse Scroll speed problems with JVM
I could not find Java (Apple's JVM ) forums, so I might be posting this in the wrong forum. With that disclaimer, here is my issue: I am running into a problem where the mouse-wheel scrolling speed configurations are not being properly passed to Java
-
iPlanet Application server 6.0 SP3 for windows versions.
-
Hot links open as blank tabs.
When I click on a hot link on a web site, the page opens as a new tab, but is blank.