Enable the Bluetooth stack in vista for communicat​ion in LabVIEW

hi
i am finding problems in the detection of the Bluetooth by the LabVIEW. i have searches on it and i need to enable the bluetooth stack.
how can i enable the bluetooth stack in Vista?
Somil Gautam
Think Weird

hi
My labVIEW version is 8.6.
The bluetooth drivers i am using are the ones which i got along with my Bluetooth Dongle. 
Somil Gautam
Think Weird

Similar Messages

  • Error: Unable to start the bluetooth stack service

    HP Pavilion g7-2017us, Windows 7
    After starting up I get the error message: UNABLE TO START THE BLUETOOTH STACK SERVICE.
    First, I don't know what that means ... Second, I don't know how to remedy the problem.
    Can anyone help please? ... THANKS!

    Steps I would suggest are:
    1. Update Bluetooth Device Driver. Steps to update the device driver:
    i. Click on Start
    ii. Select Control Panel
    iii. Select System and maintenance
    iv. Click Device Manager (If you are prompted for an administrator password or confirmation, type the password or provide confirmation.)
    v. In the Device manager locate the Blue tooth device
    vi. Click the Driver tab, and then select Update driver
    If its still not fixed go to step 2
    2. Uninstall the Bluetooth device, restart the computer and install the latest drivers.
    Link for reference: Update a driver
    Broadcom bluetooth Drivers for windows 7 64-bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104112-1&cc=us&dlc=en&lc=en...
    Intel Wireless Drivers for windows 64-bit
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104707-1&cc=us&dlc=en&lc=en...
    Regards;
    Ray
    I am an HP employee
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • BTTray Error: Unable to start the Bluetooth Stack Service

    I have a HP TouchSmart 610-1190f operating system Windows 7 64-bit
    I installed Norton 360 back in January and ran the registry program which corrupted the Bluetooth.
    BTTray Error:  Unable to start the Bluetooth Stack Service.  I know that a system restore will take care of it, but when it happened I did not know that and I also did not know that I can't go back in time like Windows XP.  I've tried reinstalling the driver with no luck.  Is my only option a System Recovery?

    Product Name: HP H8-1160t
    Product Number: QC45AV#ABA
    I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
    After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
    Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
    NO FIX!!  As expected.  Why Did HP Software Support think the new card would fix the issue?? HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
    OK. I FIXED the problem myself:
    I downloaded the Broadcom fix:
    sp56715.exe
    Available from:
    ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe   (eliminate the spaces...HP forum would not let me load this VALID site.
    I am NOT POSITIVE THAT DOWNLOAD IS FOR YOUR VERSION, BE CERTAIN TO CHECK SYSTEM REQUIREMENTS.
    Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
    Trust me, HP Software Support is a waste of time.

  • HT204387 can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce?

    can we get apple to make a fix to download that would enable the bluetooth file sharing with any deivce? i would like to to stay with Apple iphone but if they dont improve the lack of features.. i will move on and I know im not the only person to think like this.
    regards
    gavin_p

    There is not "fix" to be provided, Apple made a decision to not include the file sharing profile.
    You are welcome to provide feedback, but after six years, I would not hold your breath.
    Feedback can be left here: http://www.apple.com/feedback/iphone.html

  • In settings on my ipad the Bluetooth is constantly searching for devises. How do I make it quit searching.

    In settings on my ipad the Bluetooth is constantly searching for devices. Why doesn't it stop or how do I stop it from searching and automatically connecting to devices?

    If you do not set your device in discoverable mode, the iPad will never find them.

  • I get this message when i start the computer :" error : unable to start the bluetooth stack service"

    i get this message when i start the computer :" error : unable to start the bluetooth stack service"

    If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
    Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
    In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
    Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
    If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
    The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

  • When will the bluetooth support audio alerts for email and text messages?

    When will the bluetooth support audio alerts for email and text messages? It works when I get a phone call, but I'd like it to work when getting a text message (I do this a lot in noisier areas and would rather not have to look at the phone every few minutes)
    Or is there a configuration option I'm missing?

    Answered in this thread:
    http://forums.adobe.com/thread/1393642?tstart=0

  • Enable the Shop on Behalf functionality for Employee Self Service Role (Requisitioner) in SRM 7 EHP 3

    Dear All,
    We are in SRM 7.0 EHP 3 and we are planning to add the shop on behalf functionality for our requisitioner (Employee Self Service Role). As per the standard, we are aware that it can be implemented in SC professional.
    Is there a way to add the SOB functionality in SC Wizard as well. We have tried the below suggestion.
    Enhance the BBP_SC_MODIFY_UI BADI. But it hasn't helped us where the link is not at all appearing. Could you please advise if there is any enhancement needs to be done in Web Dynpro level or the changes need to be done in BADI and also in Web Dynpro level.
    Thanks in advance for your help.
    Best Regards,
    Bharathi

    You observation is correct and it is the standard design of such portal roles as SRM Administrator, SRM Strategic Purchaser, or SRM Operational Purchaser to not have "personalization", but only Employee Self Service role.

  • Is there a way to make the bluetooth source I pick for Siri persistent?

    I have my iPhone paired with the factory Bluetooth hands-free audio in a car. I like using it for phone calls, but not for Siri.
    When I start Siri, I can choose my audio source, but the iPhone forgets the selection after that session, and defaults back to trying to use the car's speaker and mic the next time I use Siri.
    Is there a way to make this audio source selection persistent?
    Thanks,
    Heath

    Hey,
    I'm a Quadriplegic and I use my iPad with a mouthstick I made. Everything works great. Send me an email to bradcletter AT gmail.com and I'll help you out with everything!

  • Can I enable the countdown in photo booth for ipad2?

    In past versions of photo booth, I remember that while we were taking photos, it had automatically started countdown for 3 seconds. Now, it doesn't countdown and I couldn't find how can I enable it. Thanks for your help..

    Thanks for the reply Lori, I hadn't found the Comic Life effects (there's quite a few in the version I have also).
    None of the ones I have seem to recreate the 'colored pencil' however -
    here's what the effect does in Photo Booth (please excuse the frightening early morning snap...)
    <http://www.exito.co.uk/images/PhotoBoothColoredPencil.jpg>
    That's what I'm trying to acheive with existing images.
    I'm hoping it's possible with the inbuilt Core Image filtering (or an app utilising it)
    as I'm guessing that's what Photo Booth is using under the hood.
    Johnny.

  • Every time Firefox open I get an error message stating "Unable to start the Bluetooth stack Service". What does this mean and what should I do about it, if anything?

    This occurs ever time I start my computer. It does not seem to impact anything I do. I just click OK and it goes away with no apparent harm.

    Thank you so much for answering a question that has been bugging (no pun intended) me for so long. I am not a technical person at all, as you can see by my assumption that this was a Firefox and not a Windows situation, and I would have continued to just kept on hitting the OK button forever. I opted out by disabling the option but I copied the solution to a Word document and placed in a file just in case I needed to reverse in the future. Thanks once again for your quick response and interest in helping. Ed

  • I keep getting a message, "cannot start the Bluetooth Stack Service:, what does this mean

    I have the c510a photosmart estation, windows  7, 64 bit.  How can I get rid of this message? 

    I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

  • Using existing c code for usb-hid communicat​ion in labview

    Hello,
    I want to write a simple temperatrue logger using labview and a external hardware which communicates over usb-hid. The external hardware uses an ATMEL 90USB162 µC and DS18B20 sensors.
    Link to the hardware:
    http://www.diamex.de/dxshop/USB-Temperatur-Sensor-​Tester-fuer-DS18B20
    The source of a a simple command line tool is available (see attachement), which reads out the temperature value of the connected sensors.
    Is it possible to include this c-code in the labview application to simplify the communication?
    Thanks a lot and best regards,
    Michael
    Solved!
    Go to Solution.
    Attachments:
    CMDLINE.zip ‏17 KB

    I'm not that experienced at this personally (in terms of compiling C code into DLLs), but I believe the process you need to go down to call your C code in LabVIEW is to compile the C code into a DLL which you can then call from LabVIEW using a Call Library Function node (or you can try to use the "Import Shared Library" wizard to automatically generate SubVIs).
    There's more information here:
    http://digital.ni.com/public.nsf/allkb/DCB90714981​A1F148625731E00797C33
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • I am new to the ethernet communicat​ion using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.

    i am new to the ethernet communication using labview. I do not have any hardware. I have two laptop i need to send and recieve the data via these 2 laptop using labview. Kindly help me on this.
    Solved!
    Go to Solution.

    Hi thanks for the help.
    Actually i am trying to send 10 sine signals from server pc to client pc. So i will bundle 10 signals in server pc and send it and in client pc i am unbundling it and need to save in TDMS format.
    Till unbundling i was able to do. TDMS format it is saving only last value. I need to save all the values. Kindly help me on same. I am attaching both the VI.
    Attachments:
    Client.vi ‏62 KB
    Server.vi ‏252 KB

  • PLC Communicat​ions with Labview

    How do I view and record data from my plc to labview, currently we are using autmation directs DL205 with the 260 processor

    If the DL 205 communicates through the Modbus protocol, you could use the Modbus library. This library consists of a bunch of VIs which can be used for Modbus communication. Think of them as advanced Serial read/write VIs. However, if you are looking into monitoring, datalogging and controlling the registers, then I would recommend the LabVIEW Datalogging and Supervisory Control Module. Using shared variables, you can then easily bind, control and talk to the registers and most of the work is taken away from you.
    If the DL 205 doesn't communicate throught the Modbus protocol, then you would need an OPC server (like the NI Industrial Automation OPC Servers) and the LabVIEW DSC Module. You can then communicate from the LabVIEW DSC Module with the OPC server.
    Message Edited by Adnan Z on 03-15-2007 10:27 AM
    Adnan Zafar
    Certified LabVIEW Architect
    Coleman Technologies

Maybe you are looking for