Enable the extension to keep chrome bookmarks up to date with the safari bookmarks on your iphone
on my laptop icloud comes up and tells me i need to enable the extension to keep chrome bookmarks up to date with the safari bookmarks on your iphone! if someone could help me i would be grateful !!
Once you click "get new recovery key" all data on your sync account is erased forever. There is no way to get that back. If you have data on your iPhone you cannot move it from your iPhone to desktop Firefox. the iPhone sync is 1-way only. Unless you have a Firefox profile somewhere, you will ahve to manually rebuild your bookmarks.
Similar Messages
-
Why the ISTORE of Malta is not up to date with the latest movies and series like the UK & USA and why old movies are being uploaded .
I believe the apple should be universal in all the products and a small island like Malts should have the same products for sale on ISTORE like of the UK and USA.The iTunes and App stores are inherently different in different countries. Local laws on copyright and other limits on the distribution of intellectual property make it impossible for Apple to simply put everything in every store. Sometimes, the owner of the intellectual property does not allow it to be distributed everywhere. Keep in mind that Apple does not own the music, books, movies and such that they allow for sale in their store front, so they do not necessarily have any say in what may, or may not appear in what store.
-
Keeping Contact Groups up to date with the iPhone
I use my Address Book groups to organize my customers. The problem I'm having is this: when I'm out and about and I add a few new customer contacts on my iPhone they get lost in "All Contacts" when I sync to my computer. I know that you can not add them to groups while on the iPhone, but is there at least a way to identify the most recently added addresses in Address Book? The "Last Imported" category doesn't list them.
Bottleshock,
There is an option in the Info tab in iTunes to have contacts created on your iPhone put into a specific group when you sync them back to your computer. I have mine set up to go into an "iPhone" group, where I know all contacts in that group were created on the iPhone and have not yet been assigned to another group.
Hope this helps,
Jennifer B. -
How do you bookmark to a folder with the keyboard?
Since getting in to the habit of better organizing my bookmarks, I have bookmark folders that are up to three levels deep.
How can I save a bookmark to a specific folder without having to use the mouse or click "Choose..."?
It would be nice if there were a way to just type it, with folder suggestions coming up.
I.e. I would be able to hit Ctrl+D, type the name, hit tab, and type Classes\303\HW to have it bookmark to that folder. Right now, I can only bookmark to recently used folders with the keyboard.
I know this can be done with the mouse, but I am looking for a fast way with the keyboard, possible with a plugin of some sort.I will check out the add-ons, see if there is anything that would make it a little faster, but the '''ctrl+d, tab, tab, space combination''' should be good enough for now, I'm surprised I missed that. I knew about the five most recent, but that wasn't enough for me.
Thanks for the help! -
Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.
What do you mean "doesn't recognize"?
-
firefox plays video, but no sound. when I type about:plugins in location bar, it shows the firefox default plugin is not enabled. When I look at my plugins, it says it is enabled. I have uninstalled 3.6 and re-installed with the same result. Why do I have no sound. Computer plays I-tunes and all other sounds, just no web browser sounds.
Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems. -
I keep receiving a server error message with the new beta version of iMessage. What can I do to fix this?
Ok I have a question.
Why do you want to use Beta software? Especially since you are having this problem with it?
Uninstall it and forget about it until it is released as a real piece of software. -
Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue
fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?
I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....
-
Wish to keep always 2 years of data on the cube
Hi Experts,
we wish to keep always 2 years of data on the cube and archive the data after it is 2 years old.
Any thought on this is appreciated.
Thanks,
Varun.hi Varun,
you can use tcode SARA and 0calyear as selection to archive the cube to flat file or another cube,
for more detail please follow this how to archive in bw doc
https://websmp108.sap-ag.de/~sapdownload/011000358700000085572002E/HowToArchiveinBW.doc
hope this helps. -
I keep getting a pop-up window with the following message, even though I haven't got anything plugged in to any USB points. It comes up every few seconds, often multiple times at once. Can anyone advise why it is happening and how to get rif of it?
Reset your SMC.
Resetting the System Management Controller (SMC) - Support - Apple -
My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?
See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck! -
so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?
It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.
-
Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestionsThis is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
ditto [-v] [-V] [-X] [<options>] src ... dst_directory
ditto [-v] [-V] [<options>] src_file dst_file
ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
ditto -h | --help -
After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.
Maybe you are looking for
-
How to Delete the Software Conponents in BULK from IR
Hi, I have Imported many number of software components those were available in SLD into IR unexpectedly I know we can delete those from IR one by one using this Blog How to : Delete Software Component from Integration Builder But How to delete all th
-
Default alarm for all-day events
When I set up iCal, I used a default alarm at 11 pm for ALL-DAY events. I don't stay up that late anymore, and now I have to manually reset the alarm to a more sane time every time I enter an all-day event. How do I change the default to earlier?
-
How do I save a stickie note with a different font size other than the default? When I create a note and save it using a larger font, it reopens with the default.
-
"Back in the day" when we had OSX server, perhaps version 10.1 , running with Macintosh Manager there was a utility called File Blaster which could be used to send or "blast" files into special places we might need. For example if we wanted to put so
-
Smartform : Require a dotted line for a window
Hi, Can you please provide a way to have a dotted line for a window in Smart forms. I have used the Template options Dashed Lines (of the Tab Grid), but not successful. Regards, Karuna Reddy