Enable to open query in sap bw analyzer .

Hi All,
I am getting problem while opening a query in analyzer it is giving error like this.....
warning hierarchy bus area hierarchy kota 000000000 is not available for infocube
abort system error in program cl_rsr_hierarchy_buffer and form -incl_read_db-1- and also i tried in bex designer...when i go for execute it is saying the addres path is not correct.
Please help me out regarding this error...
Regards,
Venkatesh.

Hi,
Hope you're doing fine.
Check if your query is using a hierarchy. Probably the H table of one of the hierarchy is empty.
You have to detect which one is, delete and reload.
Hope it helps.
Best regards,
Pepe

Similar Messages

Query on SAP Bank Analyzer

Hi,
We are presently working on the SAP Banking suite , mainly on SAP Loans Management and SAP Collateral Management. We would now like to look into SAP Bank Analyzer. Can SAP Bank Analyzer be accessed in SAP ECC 6.0 ? If not, request you to clarify if this can be provided as an add-on or is it available in a different platform and if additional licences are required.
Moreover is there any training program and material on Bank Analyzer provided by SAP?
Shall appreciate a quick response.
Regards
Subhobrata

Hi Subhobrata,
SAP Bank Analyzer has never been part of SAP ECC. It is shipped as part of Banking Services from SAP.
Banking Services is based on a different Netweaver stack (7.1X) than ECC (7.0X). Installation is only possible as separate instance and requires additional licensing.
An overview of trainings for analytical banking is available at: http://www1.sap.com/services/education/catalog/industry/curriculum.epx?context=%5b%5bBANK_ANAL%5d%5d%7c
Regards
Peter

Cannot open query in Excel (BEX analyzer)

Hello Experts,
Issue: Cannot open the BEX report in Excel but can open the same report on IE.
1) I am trying to open a BEX report "ReportA" in Excel (BeX Analyzer).
2) As soon as the report opens it shows me a message "Do you want to open the 3.X workbook for upgrade"
3) I click on "OK"
4) then i get a message window listing a lot of warnings liike " Access to project denied" "creation of items failed"
5) i click on "OK"
6) Now, variable entry screen appears
7) i enter values and click on "OK" the report does not show any data.
Now, the same report "reportA" when i open it in Internet Explorer, it displays data. What can be reason for this problem in BEX analyzer ?
Please comment.
Regards,
Suraj S Nair
Edited by: Suraj S Nairon Dec 28, 2009 10:50 AM

Hi Suraj,
If you want to execue your query, you can use the bex analyzer.
If you are opening the query from query designer 3.x query in 7.0 fronend, it will get upgraded and then cannot be reveted.
In your case this automatic migration might be havng some issues, owing to complexities.
Please recheck.
-Vikram

Advantages of BW Query in SAP Portal when compared to WEB BEx Analyzer

Hi
What are the advantages of having a BW Query in SAP Portal when compared to WEB BEx Analyzer
I had to presention to higher managers of having a SAPPortal for BW report that WEB BEx Analyzer
can any one please update me with few points (10-20) that will be useful for my presentation
screen to geethikakrishna->gmail
Thanks in advance

Hi Krishna ,
I think you should highlight the portal role in presentation
Now a days all organizations using sap portal as their user interface. We can login portal once and we can get all the information from bw,crm...sap systems and non sap systems.
so no need to login each and every system individually.
The portal offers a single point of access to SAP and non-SAP information sources, enterprise applications, information repositories, databases and services in and outside your organizationall integrated into a single user experience. It provides you the tools to manage this knowledge, to analyze and interrelate it, and to share and collaborate on the basis of it.
With its role-based content, and personalization features, the portal enables usersfrom employees and customers to partners and suppliersto focus exclusively on data relevant to daily decision-making processes
For all information on portals refer to help.sap.com->documentation->netweaver->Netweaver2004->English
IN people integration you will find information on portals
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
check below threads for some information
easiest way to publish
Easiest way to post existing BW queries onto portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9d/24ff4009b8f223e10000000a155106/frameset.htm
Execution of BW Reports Through Enterprise Portal
Best Practices for BI Report publishing on Portal - BI 7
Use of BI's Enterprise Portal
The web application designer offers rich functionality for creating dashboards. In SAP NetWeaver BI 2004s (aka 7.0), when you publish a template it is automatically created as an iView for the portal.
SAP NetWeaver 2004s BI - Define your Publishing Strategy Part 1
Koti Reddy

Execute Query from SAP Menu with Analyzer

Hi.
I have created a menu for users. This menu contains links to queries that are opened with Internet Explorer.
Now, i want to have another link but instead of opening it with Internet Explorer, i want to open them with Analyzer.
Is possible to launch a query trough SAP Menu link in Analyzer? User will not need to open it trough 'Folder + Open Query ..'
Kind regards,
Inigo.

Here are couple of directions:
1. Create a local workbook which has embedded query. Store this workbook on a remote server or BI/FTP and create a link from it. But once this link is clicked, that workbook will be downloaded and user will have to login again in BEx analyzer.
2. If we can call transaction "RRMX" from web, it will eliminate problem of relogin.
3. Launching BExAnalyzer.exe file from web should launch analyzer automatically. Check whether this file accepts any parameters like open dialogue or query name??
Hope something helps..
Abhijeet

Unable to open Query in Bex Analyzer

Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.

Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek

Query on Analytical Banking - SAP Bank Analyzer

Dear all,
I need to start working on SAP Bank Analyzer as part of a capability building plan. In this aspect, I would like to know if there is a download of SAP Bank Analyzer for a trial period of 1 month and if yes, how do we carry out the download. I shall appreciate a quick clarification in this regard.
Regards
Subhobrata Talukdar

Hi Subhobrata,
SAP Bank Analyzer has never been part of SAP ECC. It is shipped as part of Banking Services from SAP.
Banking Services is based on a different Netweaver stack (7.1X) than ECC (7.0X). Installation is only possible as separate instance and requires additional licensing.
An overview of trainings for analytical banking is available at: http://www1.sap.com/services/education/catalog/industry/curriculum.epx?context=%5b%5bBANK_ANAL%5d%5d%7c
Regards
Peter

Unable to open query designer while able to access BI system

Hi Experts,
   I have problem while opening query designer, analyzer , WAD . I get the below error. But when i access the relevant BI system i am able to access it well , i dont get any RFC Error. Will there any port setting for query designer separately. This is problem faced at offshore which connects to client servers at onsite. Onsite guys are not facing any issues openning query designer or analyser. Please guide as i am not good in basis ..
RFC_ERROR_COMMUNICATION
Message
CMALLC : rc=27 > Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=163.164.XX.XXX, GWSERV=sapgw00, SYSNR=00
LOCATION    SAP-Gateway on host XXXXXXX/ sapgw00
ERROR       timeout during allocate
TIME        Mon Sep 12 14:20:38 201
RELEASE     700
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        2066
DETAIL      no connect of TP sapdp00 from host 163.164.XX.XXX, after 20 sec
Thanks
Vamsi
Edited by: vamsi talluri on Sep 14, 2011 6:57 PM

Hi Experts,
   I have checked with basis team , my issue is resolved, please find the solution .
1) Add corresponding system server names in host files of the offshore desktops.
2) After that basis has added offshore natted ips in sap gatewat parameter/alternate hostnames in system profile (rz10 tcode).
Then offshore are able to access query deisgner etc....
Regards
vamsi

Open Office in SAP

Dear All,
In ALV Grid, there is a option for spreadsheet in place (CtrlShiftF7). ie.,the list is being displayed in Excel screen within SAP environment (Provided, VBA should be enabled in Excel).
Our requirement is to do the above process in Open Office (in Calc). Is there any setting to complete this ?.
Can any one help me out in this regard?
Regards,
S.Sridhar

Hi Sridhar,
Check this SAP note under Product Enhancement
1270346 - "Open Office"
It says
"Open Office (www.openoffice.org) is an open-source suite of office applications that is free to use.
Business Objects Planning is tightly integrated with Microsoft Excel and is not supported with any other spreadsheet application."
Check this link as well
[Open office and SAP|http://www.openoffice.org/servlets/Search;jsessionid=1F2D4A4B4F04742DA6D3599F66E765CA?resultsPerPage=40&query=SAP]
Regards

Unable to Open Query

Hello,
I have a user that is unable to open a query using the BEx Analyzer. The user is able to refresh workbooks, but cannot open queries using the Business Explorer Menu.. When selecting a query, the screen goes blank. I have tried this user's ID on my computer and it still does not work. We are running BEx 3.5.
Any help would be greatly appreciated.
Thanks!
Tina

It could be either or both. SAP BW has two, and potentially three, levels of security.
1) There could be custom Authorization Objects created to limit access to authorization-relevant InfoObjects. Any
InfoProvider where an authorization-relevant InfoObject exists will invoke this security.
2) BEx has some Authorization Objects required in order to do particular functions within the tools. Also, there are activities (e.g. create, read, modify, etc) that are associated to the objects.
3) If you're using the SAP BI Portal or SAP Enterprose Portal for your reporting, it has it's own set of Authorization Objects because you can setup tabs whereby you can restrict who can view specific tabs. For example, you can have a tab for Labor reports in your portal where only a select few people can even execute the reports. This would be desirous even though the data is security and the report would come back with no data.

Edit Bex Query in SAP Gui?

Hi,
Anyone know if it is possible to edit a Bex Query in the SAP Gui? For instance with a T-code or Program in SE38? Having problem with my Bex fontend and am not allowed to install patches on this computer. Only need to remove on Free charracteristic.
Thanks,
Martin

Hi Martin,
I don't think it is possible. I never heard of opening Query other than Query designer. I think best option will be to fix your computer and install patch.
Regards,
Kams

SAP Memory Analyzer for 64-bit

where can i get the new SAP Memory Analyzer (JAVA) for windows 64bit installations ?
i just found it for 32 -bit , and this can not be installed on windows 64bit maschines .
thank you
hannes toefferl

Hi Hannes,
Sorry, I fixed the error on the Wiki page. Currently we can only offer the download of the 32 bit Windows version. We are however discussing to put the current version out as plugins ZIP and hopefully on an update server, as well.
For now, please have a look at our Wiki which describes how to create your own installation based on the plugins stored in the installer:
Excerpt from the Wiki ---
However, since we are based on Eclipse 3.2.0 you can try this: Download Eclipse 3.2.0 for your platform, copy our plug-ins (can be found in the installer -> Resource1.ZIP -> MemoryAnalyzer.zip -> plugins) into the plugins folder of your Eclipse installation and open the Memory Analysis perspective. On Windows 64 bit and Linux 64 bit (x86_64/GTK 2) this proved to work. Don't forget to give your Eclipse installation plenty of Java heap - the more, the faster.
Kind regards,
Vedran

Enabling Create New Query and Personalize in Check Status

Hi All,
We followed below steps Enable Create New Query and Personalize in Check Status
Go to the role of the user - PFCG - Authorizations - Change authorization data - Cross-application authorization objects - authorizations for Personal Object Work List (POWL) iViews
Specified the application ID POWL_APPID - SAPSRM_E_CHECKSTATUS
What should be done to enable define query and personalize for all users.
We have changed the following settings -
In activity POWL_CAT - '??' , POWL_LSEL-DISALLOWED - POWL_QUERY - ?? , POWL_RA_AL - ?? , POWL_TABLE - ??.
With our current settings Create New Query and Personalize in Check Status appear but are disabled (greyed out)
New Query Button appears but clicking on it produces no output.
Nikhil
Edited by: Nikhil Malvankar on Sep 12, 2011 5:57 AM

You could the following to check if the Query still exists in the database:
Open SQL Management Studio and connect to the SQL Server hosting the ConfigMgr database
In SQL Managemnt Studio, Expand Database, Expand CM_YourSiteCode
Expand tables and find the dbo.Queries table
Right-click the dbo.Queries table and select Select Top 1000 Rows
See if you can find your "ghost" Query
Please note - it IS NOT supported
to make direct changes to ConfigMgr database so I would properly call PSS on this one before you start getting creative.

No OPEN QUERY VIEW function in BI 7 ?

Hi gurus,
Where can we open a query view in BI7's analyzer? There's no "query view" under the open button of analyzer in BI7 but there were one in BW 3.5.
Now I have to open them using old version analyzer
Regards,
Aaron

Hi Dear Chandru
Could you plz. let me know how to create a query view in BI 7.0
Your help will be more appreciated.
Please its top urgent
Thx u & b. regards.

Query IN SAP B1

Hello All,
Please help how I can create consumptiom query in sap B1 , I need to create with fields:
1. Catalog number
2. Description
3. Stock hand (up to day)
4. A single cost
5. Sum of stock (single cost * stock)
6. consumption per month
7. Stock years (stock/consumption (average)12 month)
8. group mane
9. sum of open purchase order
10. sum of open order
Please Help
Best Regards
Diana

Dear,
Create Self defined Logistic Information System,
Regards,
kapil

Enable to open query in sap bw analyzer .

Similar Messages

Maybe you are looking for