Enable User is not working for Provisioning

Hi,
I am trying to provision enable user to target system. For that, in my process definition, I have a task "Enable User" added with Task Effect as "Enables Process Or Access To Application" with Conditional, Required for Completion, Allow Cancellation while Pending, and Allow Multiple Instances selected. But somehow it's not working. I have checked, system property XL.EnableDisabledResources is set to TRUE. Can you please help me with this.
As an alternative solution, I have also tried adding "USR_STATUS" or "USR_DISABLED" code under Lookup.USR_PROCESS_TRIGGERS and having a task and having a task added in my process definition with same name as meaning of this code. But those are also not working. This is exactly like Change First Name meaning under Lookup.USR_PROCESS_TRIGGERS. So, I hoped change in USR_STATUS or USR_DISABLED will trigger my task, but no luck :-(
Can anybody please help with this? I have also read some that Enable User has some issues in OIM 11g R2. If that is the case, what's my alternatives?
BTW, scheduled job "Evaluate User Policies" is also enabled and running successful every 10 minutes.
Thanks,
Ashish

Hi Have you get to know what was cause of this issue yet? If yes, can you share of what have you found?
Thanks

Similar Messages

OOTB create user is not working for AD

Hi,
While creating the user am getting the following error.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeVariableMappings - Data: adv name - Value: PasswordNeverExpires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeVariableMappings left.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: Variable Name - Value: PasswordNeverExpires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: MapTo - Value: Process Data
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapQualifier - Value: Password never expires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapValue - Value: UD_ADBURG_NEVER
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sVarDataType - Value: Boolean
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapOldValue - Value: 0
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapChildTableName - Value:
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue entered.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue - Data: psFieldName - Value: UD_ADBURG_NEVER
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue - Data: psMapSourceDataType - Value: Boolean
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],tcAdpEvent/getDataSetFieldValue poDataSet is null
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpADCSCREATEUSER
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value: R
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value: {2}
*[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value: Exception java.lang.NullPointerException was thrown in adapter "ADCS Create User". The Adapter Response was "null"*
NOTE:
Am creating user through the access policy, it throwing the above error for auto provisioning…
IF open (edit) process form of AD and click on save (w/o changing the process data) and retrying the crate user task it working .
Advance Thanks..

This is typically the result of the checkboxes on the form. You need to give a default value of 0 or 1 either using the Default option, or prepopulate. If you do not fill this in, when the form is completed through auto-save, it will have a null value.
-Kevin

After deploy in server, integrated Security works for all users but only one user does not work for one user

hi
   i'd like to ask for help.here is a brief introduction.
      i publish a web project on a server(the name,"server-deploy"),(it connect with sql server datavvase with connection string of database "Trusted_Connection=Yes",with web config file <authentication
mode="Windows" />    <identity impersonate="true"/>
   there are some users whose Impersonae_clients_after_authentication are enabled. and most of them can connect to database via the deployed project .
but one user,he was told 'NT AUTHORITY\ANONYMOUS LOGON', and according to even viewer("security of "windows log") of "server-deploy",it shows "Audit failure"(the Task category is "credential validation")
and here is some information
[ Name] Microsoft-Windows-Security-Auditing
   EventID 4776
The computer attempted to validate the credentials for an account.
PackageName MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
TargetUserName (user)
Workstation (Workstation)
Status 0xc0000064
   while when other user do login ,there is no log whose Task category is "credential validation".
COULD ANY ONE CAN DO ME A FAVOR TO HELP ME?ANY HELP IS APPRECIAT. THANK U VERY MUCH IN ADVANCE :)
best regards
martin

and i made a small windows form application here
   private bool impersonateValidUser(String userName, String domain, String password)
            WindowsIdentity tempWindowsIdentity;
            IntPtr token = IntPtr.Zero;
            IntPtr tokenDuplicate = IntPtr.Zero;
            if (RevertToSelf())
                if (LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE,
                    LOGON32_PROVIDER_DEFAULT, ref token) != 0)
                    if (DuplicateToken(token, 2, ref tokenDuplicate) != 0)
                        tempWindowsIdentity = new WindowsIdentity(tokenDuplicate);
                        impersonationContext = tempWindowsIdentity.Impersonate();
                        if (impersonationContext != null)
                            CloseHandle(token);
                            CloseHandle(tokenDuplicate);
                            return true;
            if (token != IntPtr.Zero)
                CloseHandle(token);
            if (tokenDuplicate != IntPtr.Zero)
                CloseHandle(tokenDuplicate);
            return false;
and here is the code of buttonclick
if (impersonateValidUser(user,psw,doman))
                if (!System.IO.Directory.Exists(this.textBox1.Text))
                    MessageBox.Show("not exist with imper");
                else
                    MessageBox.Show("exist with imper");
                undoImpersonation();
            else
                MessageBox.Show("fail login.");
   and i was told "exist with imper"(usually if Impersonae_clients_after_authentication is not enaled would told "not exist with imper" )

Enabled cookies, but not working for this specific site...

I was trying to log in to milwaukeejobs.com, but then it takes me to a page which says, "If you have tried to log in, but are being redirected to this page. It may be because cookies are not enabled on your computer." I made sure my cookies were enabled (I have "accept cookies from sites" and "accept third-party cookies"), but I still can't log in. I tried logging into my milwaukeejobs.com account from another browser (Safari) and that worked so it's not a problem with my account. It is firefox. I didn't have a problem with this until I upgraded to firefox 4. Please help! Thanks so much.

Had the same problem with a different website. Solved by doing this:
# Clean browsers cookies and cache
# Go to the specific login/registration page that didn't work. Make sure it is http://'''www'''.site.com and NOT just http://site.com
# Login/register

Form Designed in LiveCycle will not work for End User

Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!

The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.

Thunderbird Mission Control Desktop/AutoConfig not working for some users

I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\defaults\pref\custom.js"
It contains:
pref("general.config.obscure_value", 0);
pref("general.config.filename", "TMcustom.cfg");
I have the file: "C:\Program Files (x86)\Mozilla Thunderbird\TMcustom.cfg"
It contains:
var promptService = Components.classes["@mozilla.org/embedcomp/prompt-service;1"]
.getService(Components.interfaces.nsIPromptService);
promptService.alert(null, "title", "testing");
For most of my users the alert pops up fine when I start Thunderbird, but for a few it doesn't. All of the machines where setup with the same install script. If I log into one of the machines where it's not working as a different user, then it works fine, so I know the files are in the right spot. So why would it not work for specific users? Is there something in the user's Windows profile that could cause it to not work? Or are there any other suggestions?

As it turns out this was a known bug that was corrected in the recent release of Java 7_65 and Java 8_11. Here is a link to the bug description in the database.
Bug ID: JDK-8019274 RMI thread can no longer call out to AWT thread for webstart app

After Upgradation BPF is not working for some users

Hi All,
We have recently upgraded from BPC 5.1 to 7MS SP7. we are having multi server setup with one application / reporting server (windows 2003 and one sql server 2008 (windows 2003 64 bit).
Intially before upgradation we don't have any issues with BPF and it worked fine for all users. But post upgradation tasks within the BPF does not work for other users except for the first two people who first used it. Other users have the same rights as the ones who can access the tasks.
when they click on the link it gets them to eExcel and the right application but doesnt open the package or report assigned to the task. It doesn't give us any errors, on the status bar we get a message finalising but does not getting any thing.
Any inputs ??

Hi,
Are you sure that those users have installed BPC 7 SP7 clients on their machine? Meaning that you uninstalled 5.1 clients and installed the new client from http://servername/Osoft?
If yes, you should maybe run a client diagnostic on the machines and also check the Management Console for any error messages.
Hope this will drive you to a potential solution.
Best Regards,
Patrick

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Search suggestion not working for anonymous user in sharepoint 2013

Hi ,
Please help on this search suggestion not working for anonymous user in sharepoint 2013
shaik

You can create a search center site, and set the search center site to
allow anonymous access.
Also see this link - http://blog.mastykarz.nl/search-query-suggestions-anonymous-users-sharepoint-2013-mavention-query-suggestions/
(As this is regarding a 3rd party tool, I suggest that you direct it to the provider support.)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

MOSS 2007 Enterprise Search not working for Korea based users but WSS Search is working fine.

Hi,
In my organization all the users are able to do Enterprise content search and people search but only Korea based users its not working (both content search & people search). But at the same time WSS 3.0 search (its a different farm) is working fine.
Your search cannot be completed because of a service error. Try your search again or contact your administrator for more information.
1. No changes in the URL for all users and Korea users
2. Tried with different browsers and clearly the temp files but no use.
3. Korea users also working from office only with Wired LAN connection.
4. Tried different accounts (including Farm account) but no use.
5. Not receiving any errors in the Event Viewer
Anyone please let me know what went wrong.
Regards,
Prabhu.

Hi,
Is the Archive folders open in your Outlook?
Please try to click and hight All Mail Items under Mail Folders and then try to search again:
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users

I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?

From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs |

Print Screen not working for user but working for Administrator

Satellite A100 Laptop Print Screen Not working for USER but is working for Administrator[ New ]
09-14-2009 11:25 AM
Hi I am new to this forum and am asking for your help. We are sharing a computer, the PrtSc key is working for the Administrator but not when we switch users. We have tried everything that we can think of: From opening a the page(S) we want to paste to not opening the pages. My most common usage is to PrtSc and paste it into an email , but barring that we have tried opening a page in notes, documents, word etc . Nothing seems to work. I do not get an error message , it just won't paste. Since we are not computer literate we are hoping you can help us with a solution . Thanks in Advance .

Jerry, that post you just answered was from nearly 4 1/2 years ago! And that's the last time the OP was here.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Enable User is not working for Provisioning

Similar Messages

Maybe you are looking for