Enable User Rights
Hello!
I have a problem. I want to mark/highlight/underline some text passages in a datasheet, I use Adobe Reader 9.
Under Tools>Customize Toolbars you can select some Tools to highlight the text, but there is a note on the
bottom of this customize window which says: "Only available when document rights are enabled".
I can't use these tools, so I think this imply that my user rights aren't enabled.
How can I enable them?
Thanks for help!
You can add the user rights to the document with Adobe Acrobat or Adobe LiveCycle Reader Extensions ( http://www.adobe.com/products/livecycle/readerextensions/ ).
Similar Messages
-
Upgrading to Acrobat Pro XI / Adobe Reader XI and enabling user rights
My company is a little behind on software updates and I'm going to ask for Adobe Reader XI to pushed out company wide since allows the user to save a filled-in PDF form.
Right now I'm using Acrobat Pro X, and suspect I will need to upgrade as well.
My questions are:
With the new-found ability of Reader to finally be able to save a filled in form, how does this effect the "enabling user rights" scenario?
Is it needed if the entire company is using Adobe Reader XI?
I did a test in Adobe Reader XI, and sure enough, I was able to save a filled-in form...BUT, I could not digitally sign the form.
Is this where the enabling user rights is still mandatory?
Or is this because the form was designed in Acrobat Pro X?
Does Acrobat Pro XI work around this?
I know I don't need to upgrade to Acrobat Pro XI to continue making forms, but should I?
Thanks for your feed back, and I look forward to reading your repliesThank you, George, for the prompt reply!
I suspected as much, but couldn't find a clear cut answer in my searches.
The tab order update alone has convinced me its worth pushing for the new Acrobat Pro XI.
The update to Adobe Reader XI will make many of our forms easier to get into the digital workflow, and I'm looking forward to getting use further away from a paper-based system -
Enable User Rights In Adobe Reader using Acrobat X
Hello,
I just upgraded to Acrobat X Pro from Acrobat Pro 9 and I'm still getting familiar with it. I need to Enable User Rights In Adobe Reader but I noticed that the tool bar does not have the "Advanced" option where Acrobat Pro 9 has it.
Can you please tell me how to go about it.
Thank you much!!!How do you remove User Rights from a documnet in Acrobat X? I can't edit my Javascript in Acrobat X and I believe thi is the reason why. Thanks
-
Acrobat 8 Form - "This Operation Not Permitted" error when enable user rights and open Reader X
I have a form which is causing me fits. It was created from an existing PDF form to which I added data fields using LifeCyele Designer.
When I enable user rights to the document and try to open it in either Adobe Reader X or Acrobat 8 Pro I get the message "This operation is not permitted" twice. Once I get rid of the messages the form works fine.
Is there a way to upload the form to this forum for someone to look at it?
With my limited knowledge, I did try to investigate embeded font issues and hidden object issues. But after much work I've not gotten much closer to a resolution.
Best,
DavidYou cannot upload the file to the forum, but you can use Acrobat.com or Dropbox if you have an account. If you ha e no other options I'd be happy to take a look: acroscript at gmail dot com
-
Enable User Rights in Adobe: how to always have that on?
I finally figured out why most PC users were not able to save any of the fields they filled out in my PDFs: I didn't know about the user rights feature.
Is there a way to always "Enable User Rights in Reader" to be turned on, so I don't have to remember to go the Advanced menu and select "Enable User Rights In Acrobat Reader" ?
Many thanks!> It took years, and years, and years of beging and pleading. And Adobe finally threw us a Bone.
Yes. And then poisioned it with this ridiculous and undecipherable license limitation.
> ...you would presumably know which users sent you a PDF that you enabled with Acrobat.
The mumbo-jumbo seems to assume the use of saveable forms is always for data collection, sent back to the form's creator. That is the use of
least interest to me.
For me, it's all about creating a design-intensive document
once (a placement ad or a marketing flyer or a spec sheet), adding a few simple boiler-plate fields to it for contact information, and sending it to my client, who then sends it to his dealers. Each dealer can then edit the contact info, save it, have it printed or placed in a newspaper, use it for trade show hand-outs.
How is the creator of such a document supposed to police the 500 "uses" limit? Who is liable when that limit is exceeded? What constitutes a single "use"? (I only used the file once. The client only used the file once. Each Dealer will
edit the form content once, but may have it printed in 501 local newspapers.)
The terms are unintelligible and probably unenforceable. This confusion has existed ever since Adobe finally threw the bone. The stupid paranoia poison just needs to be removed.
JET -
Enable User Rights In Adobe Reader is greyed out in Adobe 8
I want the ability to save my fillable forms. The user guide tells me to goto Advanced > Enable User Rights In Adobe Reader.
That option is greyed out in my Adobe Acrobat. Can't figure out why. Need some pointers.In that case you will have to start over and use the form fields in Acrobat, not Designer. I do not use Designer, so I can not say if you have just missed it or not. I am sure others will stop by and say if it is available in Designer. Bill
-
Advanced menu - Enable User Rights in Adobe Reader
Hello,
Where in the "Advanced" drop down list can I find
Advanced menu - Enable User Rights in Adobe Reader.
I would like to send a form to more than 500 people who will need to save it to their desktop, fill out the designated text boxes, save it again, and then email it back to me. I have the form saved in Adobe Acrobat Standard 8. Guidance would be appreciated.It is against the license for you to retrieve the information from more than 500 people. You need to purchase a Livecycle product to do what you want.
-
Save a Copy with enabled user rights
I have a form that has user rights enabled. I sometimes get calls from providers that they can no longer enter information on the form. They have the most current version of Acrobat Reader. My suspicion is that when they save the form they are using Save a Copy instead of Save or Save As.
I know if you have a document that has security and enabled user rights that you have to Save a Copy and then change the document security.
By using Save a Copy does that remove the enabled user rights to the document which is causing Acrobat Reader not to be able to enter information into the document?
Is there a way to disable Save a Copy on the form?
Thanks
CarolWhile a script would probably be best, photoshop 7 requires
you download a scripting plugin which may or may not install
in photoshop 7 depending on your version.
You can probably do what you want with actions. The file naming part
is not hard, but i have a couple of questions about the cropping.
Are all the images the same size and are the crops in the same position for each?
In other words on the P crop (200x250), is the crop in the same position on each
image or different for each?
MTSTUNER -
Enable User Rights using Adobe Acrobat Professional 7
I created an editable PDF form using LifeCycle Designer 7.0. My goal is to have users fill out the form and email the actual filled out form not the XML code. I added a regualr button with the following java script.
event.target.submitForm({cURL:"mailto:[email protected]?subject=Submitted Form&body=Please find attached the completed form.",cSubmitAs:"PDF",cCharset:"utf-8"});
Show = Click
Language = JavaScript
Run At = Client
When I test the button in Adobe Professional or in LifeCycle the button works fine. However when I open the file in Reader 9, it does not work. I do not encuonter any error messages. Nothing happens when you click on the button. I thought that users rights need to be enabled in order for it to work. Unfortunately I do not see how to do this Adobe Acrobat Professional 7. I do not have Adobe Acrobat Professional 8. Any ideas on what I can do to correct this issue?For Reader users and AA7, your only choice is to have the XML file submitted. Then simply open the form in Acrobat and import the XML data file to fill the form. This will be exactly what the user saw when they submitted it. Thus there is no need to submit the entire form.
-
Enabling Usage Rights for End User with Reader
When I "Enable Usage Rights in Adobe Reader," utilizing Adobe
Acrobat Pro 9, which functions are restricted for the end user?
Specifically, if one cell property in Acrobat has a
"Calculate" function, will the calculation perform properly in
Adobe Reader 9 for the end user?Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Note: Once Reader enabled certain functions like editing a
PDF,inserting or deleting the pages will be restricted at end user
part.Apart from this "Calculate" function will support both Acrobat
as well as Reader application. -
Group Policy - User Rights Assignments not taking effect on workstation`
Novell 5.1 SP7. ZenWorks 3.2 sp3. Windows XP Pro workstations.
In Group Policy, (Computer Configuration/Windows Settings/Security
Settings/Local Policies/User Rights Assignment), I have added Power Users to
the "Load and Unload device drivers" policy. However this setting is not
taking effect on my Windows XP workstations. My DLU policy for users is
configured to have the users members of the "Users" and "Power Users" groups
on the local PC.
Other parts of Group Policy (Computer Policy/Administrative Templates) are
taking effect on the workstation, so I'm wondering if the problem I am
having is related to Security Settings only.
I enabled Group Policy logging on the Windows XP workstation and include it
below:
WMHelperInitialization (Mar 4 2004) called! Flags: 0x8001002. Event:
0x1000. Impersonation: 0x2
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x204
WMHelperSystemEntryEx called!
Entered GPCleanupEntry
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Persist Workstation settings from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Persist
Workstation settings not found. Assuming 0
Error 2 reading Persist Workstation settings
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Warning: C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini does not exist
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy Machine Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy Machine Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
Renamed Administrator account: Administrator
Local Administrator's user name = Administrator
Administrator account names match, skipping.
Renamed Guest account: Guest
Local Guest's user name = Guest
Guest account names match, skipping.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
GPCleanupEntry releasing mutex.
Exiting GPCleanupEntry: 0
Exiting WMHelperSystemEntryEx ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x0. Event: 0x0.
Impersonation: 0x0
Created Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache .
No workstation. Exiting CheckForObsoleteWksCache
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x0 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Entering ApplyPolicies
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Flags: 0x80000070
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Impersonating logged on user.
Context : OU=Users.OU=Newcastle.O=OSG
Full Object DN CN=wintest3.OU=Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=wintest3.OU=Users.OU=Newcastle.O=OSG, WINNT Workstation Package,
zenwmGroupPolicy, 512, pBuffer)
Reverting to system impersonation.
Found DN CN=XP User Package:WinNT-2000-XP:Windows Group Policy.OU=Policy
Packages.OU=Newcastle.O=OSG
WMCheckIfGroupPolicyObjectsChanged entered
Impersonating logged on user.
Reverting to system impersonation.
Group Policy object has NOT changed!
Exiting WMCheckIfGroupPolicyObjectsChanged 0x0
Entered ScheduleCleanup.
Loaded wmschapi.dll
Calling WMScheduleAction
Finished Calling WMScheduleAction. Returned 0x0
Exiting ScheduleCleanup 0x0
Entered BackupOriginalGP.
No backup exists. Creating one: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Backing up original GP to C:\WINDOWS\System32\GroupPolicy.WMOriginal
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\admfiles.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\adm files.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\conf.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\con f.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\inetres.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\ine tres.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\system.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\sys tem.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wmplayer.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wmp layer.adm
Copied file C:\WINDOWS\System32\GroupPolicy\Adm\wuau.adm to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Adm\wua u.adm
Copied file C:\WINDOWS\System32\GroupPolicy\GPT.ini to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat
Copied file C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat
Entered SaveSecuritySettings
Inf path:
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\
Saving XP security settings
Saving Account Policies...
Saving Audit Policies...
Saving user rights...
Name: Administrator
Comment: Built-in account for administering the computer/domain
Full Name:
No rights.
Name: Guest
Comment: Built-in account for guest access to the computer/domain
Full Name:
Right: SeInteractiveLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: HelpAssistant
Comment: Account for Providing Remote Assistance
Full Name: Remote Desktop Help Assistant Account
No rights.
Name: SUPPORT_388945a0
Comment: This is a vendor's account for the Help and Support Service
Full Name: CN=Microsoft Corporation,L=Redmond,S=Washington,C=US
Right: SeBatchLogonRight
Right: SeDenyInteractiveLogonRight
Right: SeDenyNetworkLogonRight
Name: vector
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: wintest3
Comment: Account created by Novell's Workstation Manager
Full Name:
No rights.
Name: None
Comment: Ordinary users
No rights.
Name: Administrators
Right: SeSecurityPrivilege
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeRemoteShutdownPrivilege
Right: SeTakeOwnershipPrivilege
Right: SeDebugPrivilege
Right: SeSystemEnvironmentPrivilege
Right: SeSystemProfilePrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeIncreaseBasePriorityPrivilege
Right: SeLoadDriverPrivilege
Right: SeCreatePagefilePrivilege
Right: SeIncreaseQuotaPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeManageVolumePrivilege
Right: SeImpersonatePrivilege
Right: SeCreateGlobalPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Right: SeRemoteInteractiveLogonRight
Name: Users
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Guests
No rights.
Name: Power Users
Right: SeSystemtimePrivilege
Right: SeShutdownPrivilege
Right: SeProfileSingleProcessPrivilege
Right: SeChangeNotifyPrivilege
Right: SeUndockPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Account operators
No rights.
Name: System operators
No rights.
Name: Printer operators
No rights.
Name: Backup operators
Right: SeBackupPrivilege
Right: SeRestorePrivilege
Right: SeShutdownPrivilege
Right: SeChangeNotifyPrivilege
Right: SeInteractiveLogonRight
Right: SeNetworkLogonRight
Name: Replicators
No rights.
Name: RAS servers
No rights.
Name: Pre2000 compatible access
No rights.
Exiting SaveUserRights (0)
Saving Security Options
Found: MACHINE/Software/Microsoft/Driver Signing/Policy
Data type is 3
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SecurityLevel
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Setup/RecoveryConsole/SetCommand
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateCDRoms
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateDASD
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/AllocateFloppies
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/CachedLogonsCount
Data type is 1
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ForceUnlockLogon
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/PasswordExpiryWarning
Data type is 4
Found: MACHINE/Software/Microsoft/Windows
NT/CurrentVersion/Winlogon/ScRemoveOption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DisableCAD
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/DontDisplayLastUserName
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeCaption
Data type is 1
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/LegalNoticeText
Data type is 7
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ScForceOption
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/ShutdownWithoutLogon
Data type is 4
Found:
MACHINE/Software/Microsoft/Windows/CurrentVersion/Policies/System/UndockWithoutLogon
Data type is 4
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineAccessRestriction
Data type is 1
Found: MACHINE/SOFTWARE/policies/Microsoft/windows
NT/DCOM/MachineLaunchRestriction
Data type is 1
Found: MACHINE/System/CurrentControlSet/Control/Lsa/AuditBaseObjects
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/CrashOnAuditFail
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/DisableDomainCreds
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/Lsa/EveryoneIncludesAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FIPSAlgorithmPolicy
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/ForceGuest
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/FullPrivilegeAuditing
Data type is 3
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LimitBlankPasswordUse
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/LmCompatibilityLevel
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinClientSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/MSV1_0/NTLMMinServerSec
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoDefaultAdminOwner
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/NoLMHash
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymous
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/RestrictAnonymousSAM
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Lsa/SubmitControl
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Print/Providers/LanMan Print
Services/Servers/AddPrinterDrivers
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Control/SecurePipeServers/Winreg/AllowedPaths/Machine
Data type is 7
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/Kernel/ObCaseInsensitive
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session Manager/Memory
Management/ClearPageFileAtShutdown
Data type is 4
Found: MACHINE/System/CurrentControlSet/Control/Session
Manager/ProtectionMode
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/AutoDisconnect
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableForcedLogOff
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionPipes
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/NullSessionShares
Data type is 7
Found:
MACHINE/System/CurrentControlSet/Services/LanManServer/Parameters/RequireSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnablePlainTextPassword
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/EnableSecuritySignature
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/LanmanWorkstation/Parameters/RequireSecuritySignature
Data type is 4
Found: MACHINE/System/CurrentControlSet/Services/LDAP/LDAPClientIntegrity
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/DisablePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/MaximumPasswordAge
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RefusePasswordChange
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireSignOrSeal
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/RequireStrongKey
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SealSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/Netlogon/Parameters/SignSecureChannel
Data type is 4
Found:
MACHINE/System/CurrentControlSet/Services/NTDS/Parameters/LDAPServerIntegrity
Data type is 4
Administrator's user name = Administrator
Guest's user name = Guest
SaveHive entered
SaveHive exit : 0
Exiting SaveSecuritySettings 0x0
Backup path: C:\WINDOWS\System32\GroupPolicy.WMOriginal
Exiting BackupOriginalGP 0x0
Entered RestoreCachedGP.
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
No gpt.ini detected, aborting RestoreCachedGP.
Checking whether OriginalGP exists
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring original GP.
Entered RestoreOriginalGP.
Reading Group Policy Machine Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Reg key Software\Novell\Workstation Manager\Group Policies\Group Policy
Machine Flags not found. Assuming 0
Reading Group Policy User Flags from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Flags: 0x80000070 in key
Software\Novell\Workstation Manager\Group Policies
Entered GPDel
Deleting C:\WINDOWS\System32\GroupPolicy\User
Deleting C:\WINDOWS\System32\GroupPolicy\Machine
Exiting GPDel 0
Restoring backup GP from C:\WINDOWS\System32\GroupPolicy.WMOriginal
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.WMOriginal,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.WMOriginal\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.WMOriginal\Machine \Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Exiting RestoreOriginalGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x4000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered GPCopy(C:\WINDOWS\System32\GroupPolicy.UserCache,
C:\WINDOWS\System32\GroupPolicy, 0, handle, 0x80000070)
Copied C:\WINDOWS\System32\GroupPolicy.UserCache\GPT.ini to
C:\WINDOWS\System32\GroupPolicy\GPT.ini
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\User\MIC ROSOFT\IEAK\install.ins to
C:\WINDOWS\System32\GroupPolicy\User\MICROSOFT\IEA K\install.ins
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol to
C:\WINDOWS\System32\GroupPolicy\User\Registry.pol
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS1.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS1.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS2.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS2.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\IPS3.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\IPS3.dat
Copied file
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Microsoft\Windows
NT\SecEdit\XPSec.dat to
C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Copied file C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
to C:\WINDOWS\System32\GroupPolicy\Machine\Registry.p ol
GP_FLAG_APPLY_SECURITY_SETTINGS (0x40), not set, or security file already
copied. Will not copy security file
Exiting GPCopy 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Entered MergeGptFile(C:\WINDOWS\System32\GroupPolicy.UserC ache, 0x80000070)
g_dwVersion: 0x0.
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Found machine extensions...
Found user extensions...
Exiting MergeGptFile 0x0
Reading user's user settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol
Entered parseRegFile
Val: 'BlockExeAttachments'
Added: Software\Microsoft\Outlook Express\BlockExeAttachments
Val: 'NoHTMLWallPaper'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\NoHTMLWallPaper
Val: '**del.NoChangingWallPaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop, val:
NoChangingWallPaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \ActiveDesktop\**del.NoChangingWallPaper
Val: 'ForceClassicControlPanel'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceClassicControlPanel
Val: 'NoSMMyPictures'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMMyPictures
Val: 'NoStartMenuMyMusic'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoStartMenuMyMusic
Val: 'NoDesktopCleanupWizard'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoDesktopCleanupWizard
Val: 'NoWelcomeScreen'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoWelcomeScreen
Val: 'NoActiveDesktop'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktop
Val: '**del.NoInternetIcon'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoInternetIcon
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoInternetIcon
Val: '**del.NoNetHood'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val: NoNetHood
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoNetHood
Val: 'NoAutoUpdate'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoAutoUpdate
Val: 'NoSMBalloonTip'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMBalloonTip
Val: 'NoSMConfigurePrograms'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSMConfigurePrograms
Val: 'NoComputersNearMe'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoComputersNearMe
Val: 'MaxRecentDocs'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\MaxRecentDocs
Val: 'NoSharedDocuments'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoSharedDocuments
Val: '**del.NoStartMenuEjectPC'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoStartMenuEjectPC
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoStartMenuEjectPC
Val: 'NoActiveDesktopChanges'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\NoActiveDesktopChanges
Val: '**del.NoAddPrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoAddPrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoAddPrinter
Val: '**del.NoDeletePrinter'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoDeletePrinter
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoDeletePrinter
Val: '**del.NoToolbarsOnTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoToolbarsOnTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoToolbarsOnTaskbar
Val: '**del.NoSetTaskbar'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer, val:
NoSetTaskbar
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\**del.NoSetTaskbar
Val: 'ForceStartMenuLogOff'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Explorer\ForceStartMenuLogOff
Val: '{20D04FE0-3AEA-1069-A2D8-08002B30309D}'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\{20D04FE0-3AEA-1069-A2D8-08002B30309D}
Val: '**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{450D8FBA-AD25-11D0-98A8-0800361B1103}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{450D8FBA-AD25-11D0-98A8-0800361B1103}
Val: '**del.{645FF040-5081-101B-9F08-00AA002F954E}'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum, val:
{645FF040-5081-101B-9F08-00AA002F954E}
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \NonEnum\**del.{645FF040-5081-101B-9F08-00AA002F954E}
Val: '**del.Wallpaper'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val: Wallpaper
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.Wallpaper
Val: '**del.WallpaperStyle'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \System, val:
WallpaperStyle
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\**del.WallpaperStyle
Val: 'NoDispScrSavPage'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \System\NoDispScrSavPage
Val: 'NoAddFromNetwork'
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\NoAddFromNetwork
Val: '**del.NoAddRemovePrograms'
Trying to delete key:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall, val:
NoAddRemovePrograms
Added:
Software\Microsoft\Windows\CurrentVersion\Policies \Uninstall\**del.NoAddRemovePrograms
Val: 'ListBox_Support_Allow'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\ListBox_Support_Allow
Val: '*.fleetviewonline.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.fleetviewonline.com
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Internet Explorer\New
Windows\Allow\*.osg.com
Val: 'NoHelpItemTutorial'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemTutorial
Val: 'NoHelpItemNetscapeHelp'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemNetscapeHelp
Val: 'NoHelpItemSendFeedback'
Added: Software\Policies\Microsoft\Internet
Explorer\Restrictions\NoHelpItemSendFeedback
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\Certificates\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CRLs\
Val: ''
Added: Software\Policies\Microsoft\SystemCertificates\Tru st\CTLs\
Val: 'ScreenSaverIsSecure'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaverIsSecure
Val: 'ScreenSaveActive'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveActive
Val: 'ScreenSaveTimeOut'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\ScreenSaveTimeOut
Val: 'SCRNSAVE.EXE'
Added: Software\Policies\Microsoft\Windows\Control
Panel\Desktop\SCRNSAVE.EXE
Val: 'ListBox_Support_ZoneMapKey'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ListBox_Support_ZoneMapKey
Val: '*.osg.com'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\*.osg.com
Val: 'osgintranet'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\ZoneMapKey\osgintranet
Val: '1A00'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1A00
Val: '1809'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1809
Val: '1803'
Added: Software\Policies\Microsoft\Windows\CurrentVersion \Internet
Settings\Zones\1\1803
Val: 'DontPromptForWindowsUpdate'
Added:
Software\Policies\Microsoft\Windows\DriverSearchin g\DontPromptForWindowsUpdate
Val: 'NC_RenameLanConnection'
Added: Software\Policies\Microsoft\Windows\Network
Connections\NC_RenameLanConnection
Val: 'PromptPasswordOnResume'
Added:
Software\Policies\Microsoft\Windows\System\Power\P romptPasswordOnResume
Val: 'NoAUAsDefaultShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUAsDefaultShutdownOption
Val: 'NoAUShutdownOption'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAUShutdownOption
Val: 'BehaviorOnFailedVerify'
Added: Software\Policies\Microsoft\Windows NT\Driver
Signing\BehaviorOnFailedVerify
Val: 'MovieMaker'
Added: Software\Policies\Microsoft\WindowsMovieMaker\Movi eMaker
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\User\Reg istry.pol 0x0
Reading user's computer settings.
Entered AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol
Entered parseRegFile
Val: 'NoUpdateCheck'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoUpdateCheck
Val: 'NoSplash'
Added: Software\Policies\Microsoft\Internet
Explorer\Infodelivery\Restrictions\NoSplash
Val: 'PreventAutoRun'
Added: Software\Policies\Microsoft\Messenger\Client\Preve ntAutoRun
Val: 'NV PrimaryDnsSuffix'
Added: Software\Policies\Microsoft\System\DNSClient\NV PrimaryDnsSuffix
Val: ''
Added: Software\Policies\Microsoft\Windows\Safer\
Val: 'WUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUServer
Val: 'WUStatusServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ WUStatusServer
Val: 'NoAutoRebootWithLoggedOnUsers'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoRebootWithLoggedOnUsers
Val: 'AutoInstallMinorUpdates'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AutoInstallMinorUpdates
Val: 'DetectionFrequencyEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequencyEnabled
Val: 'DetectionFrequency'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\DetectionFrequency
Val: 'UseWUServer'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\UseWUServer
Val: 'RescheduleWaitTimeEnabled'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTimeEnabled
Val: 'RescheduleWaitTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\RescheduleWaitTime
Val: 'NoAutoUpdate'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\NoAutoUpdate
Val: 'AUOptions'
Added: Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\AUOptions
Val: 'ScheduledInstallDay'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallDay
Val: 'ScheduledInstallTime'
Added:
Software\Policies\Microsoft\Windows\WindowsUpdate\ AU\ScheduledInstallTime
Val: 'RegistrationOverwritesInConflict'
Added: Software\Policies\Microsoft\Windows
NT\DNSClient\RegistrationOverwritesInConflict
Val: 'SearchList'
Added: Software\Policies\Microsoft\Windows NT\DNSClient\SearchList
Val: 'PreventIISInstall'
Added: Software\Policies\Microsoft\Windows NT\IIS\PreventIISInstall
Val: 'SecurityCenterInDomain'
Added: Software\Policies\Microsoft\Windows NT\Security
Center\SecurityCenterInDomain
Exiting parseRegFile
Exiting AppendPolicy
C:\WINDOWS\System32\GroupPolicy.UserCache\Machine\ Registry.pol 0x0
Entered GenerateGptFile(C:\WINDOWS\System32\GroupPolicy)
g_dwVersion: 0x70007.
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x70007 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting GenerateGptFile 0x0
Exiting RestoreCachedGP 0x0
Writing Group Policy User Status to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x3000 to Group Policy User Status in key
Software\Novell\Workstation Manager\Group Policies
Bumping GPT version...
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x70007 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x70007 in gpt.ini
Using version: 0x70007
Saving GPT version: 0x80008
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x80008 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entered AppendSecuritySettings
Inf path: C:\WINDOWS\System32\GroupPolicy\Machine\Microsoft\ Windows
NT\SecEdit\XPSec.dat
Restoring GP settings
Loading Account Policies...
Loading Audit Policies...
Loading user rights...
Restoring security options...
No data
No data
No data
No data
No data
No data
No data
No data
No data for Administrator account name.
LoadXPSecuritySettings returning 0
LoadHive entered
LoadHive exit : 0
Exiting AppendSecuritySettings 0x0
Signalling OS to refresh policies
RegQueryValueEx returned 2
Policies are set to apply asynchronously
Policies will be processed asynchronously
Entered SetGptVersion(0x0, TRUE).
Reading GPT Version from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value GPT Version: 0x80008 in key Software\Novell\Workstation
Manager\Group Policies
Read file C:\WINDOWS\System32\GroupPolicy\GPT.ini
Found version 0x80008 in gpt.ini
Using version: 0x80008
Saving GPT version: 0x90009
Writing GPT Version to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x90009 to GPT Version in key Software\Novell\Workstation
Manager\Group Policies
Exiting SetGptVersion 0x0.
Entering RunGPUpdate
Exiting RunGPUpdate 0
Exiting ApplyPolicies 0x0
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x34349ce0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
WMHelperInitialization (Mar 4 2004) called! Flags: 0x2001. Event: 0x2000.
Impersonation: 0x1
Opened Mutex.
Loaded userenv.dll
Mapped function RefreshPolicy
Mapped function RegisterGPNotification
Mapped function UnregisterGPNotification
Mapped function RefreshPolicyEx
Exiting WMHelperInitialization. Returning flags: 0x11
Entering WMHelperInteractiveUserEntry!
szFullDN = CN=wintest3.OU=Users.OU=Newcastle.O=OSG
DN is Typed convert it to TYPELESS
g_szUserDN = wintest3.Users.Newcastle.OSG
GinaGetUsersSIDInTextualForm ENTERED
Textual SID : S-1-5-21-1214440339-507921405-1708537768-1019
GinaGetUsersSIDInTextualForm EXIT : 0
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Current time high: 0x1c58076
Reading Last Run Time High from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Last Run Time High: 0x1c58076 in key
Software\Novell\Workstation Manager\Group Policies
Previous time high: 0x1c58076
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing User Logged In to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x1 to User Logged In in key Software\Novell\Workstation
Manager\Group Policies
Entered CheckForObsoleteWksCache
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.
Full Object DN
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG
Calling WMGetAllAssociatedObjects(FALSE, MARITIME, 1,
CN=LT_VECTOR.OU=Workstations.OU=Newcastle.O=OSG.OU =Users.OU=Newcastle.O=OSG,
WINNT Workstation Package, zenwmGroupPolicy, 512, pBuffer)
WMGetAllAssociatedObject returned 2
No associated workstation policies. Deleting
C:\WINDOWS\System32\GroupPolicy.WksCache.
DeleteGPRegVal: Error 0x2 deleting Group Policy Machine Flags
Exiting CheckForObsoleteWksCache 2
Applying user policies
Reading Don't reparse from \HKLM\Software\Novell\Workstation Manager\Group
Policies
Read reg. value Don't reparse: 0x1 in key Software\Novell\Workstation
Manager\Group Policies
Reading Group Policy User Status from \HKLM\Software\Novell\Workstation
Manager\Group Policies
Read reg. value Group Policy User Status: 0x3000 in key
Software\Novell\Workstation Manager\Group Policies
Read reg. key Group Policy User Status: 0x3000
Policy applied at predesktop. Skipping reapplication at user login.
Writing Don't reparse to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x0 to Don't reparse in key Software\Novell\Workstation
Manager\Group Policies
Writing Last Run Time High to \HKLM\Software\Novell\Workstation
Manager\Group Policies
Wrote reg. value 0x1c58076 to Last Run Time High in key
Software\Novell\Workstation Manager\Group Policies
Writing Last Run Time Low to \HKLM\Software\Novell\Workstation Manager\Group
Policies
Wrote reg. value 0x38844da0 to Last Run Time Low in key
Software\Novell\Workstation Manager\Group Policies
Apply user policies releasing mutex.
Exiting WMHelperInteractiveUserEntry ccode: 0x0
Closing log file.
Thanks in advance
AliDUPLICATE
Answered in
novell.support.zenworks.desktops.3x.workstation-manager
Regards
Rolf Lidvall
Swedish Radio (Ltd)
NSC SysOp -
Enabling Usage Rights with Adobe Pro 6.0
Is there any way to enable usage rights in Adobe Acrobat Pro 6.0?
Am i forced to buy a newer Adobe product in order to do this?
Is there software online that allows me to do this?
I would like to allow users to markup drawings in Acrobat Reader.
Any help would be very much appreciated...OK, let's go again...
Q: What is available online to enable usage rights?
A: Nothing.
Q: If i don't have to purchase more software through Adobe, what are my
options?
A: You do have to purchase software from Adobe, namely Acrobat Pro. -
Enabled Usage Rights turned off when form filled out in Acrobat vs Reader
I created a form in Acrobat Pro 9 and enabled the usage rights so the end user can save the form. Anyone who opens it and fills it in using Reader has no problem.
However, if one user begins filling it in using Acrobat (so far only Std to my knowledge), and then either that user or another opens it to continue in Reader, the form fields are no longer fillable. It has become a read only pdf.
I didn't see anything in the properties I could set to avoid this. Is there a way to save the form to avoid this problem?You mentioned AA7 users. I don't think they can not edit the form at all, just fill it in unless you saved it with backward compatibility. The PDF to them would be like using Reader and that may be the difference for AA7 use. In fact, I am not sure how far back in compatibility the user rights will extend if activated and it might be lost if backward compatibility is used with the PDF Optimizer. Those are some thoughts anyway about the comparisons you made. The other guys are the forms experts and I am not in a position to debate their comments, only offer a possible explanation.
-
Why is Enable Usage Rights creating Duplicate Pages?
I have created a dynamic PDF form in LiveCycle Designer ES 8.2. The form is formatted correctly and has no duplicate pages when examining the not-enabled form in Adobe Acrobat Pro 9. However, when I attempt to Enable Usage Rights so that external users can download the form and fill in the fields, the ENABLED version has duplicate pages. I do not understand why because the original document does not have these duplicates - they only appear when I Enable the Usage Rights. I cannot delete these duplicate pages in the Enabled version. Please help!
hello, these are the files where firefox stores its cache - you won't need ccleaner (in fact it will only slow things down as you've already noticed, since those files have to be recreated after the next start of the browser), you can also clear the cache with the built-in mechanism in firefox: [[How to clear the Firefox cache]]
-
Disabling user through API call -process task-followed by an Enable User...
Hi,
I am running on OIM 9.1 BP11. I implemented a process task to disable the user based on a URS form field change.
I can confirm from the log file and the resource that the Disable user (xellerate user) happened. But the user got enabled back right away. The log file showed that a scheduled task named "Enable User After Start Date" ran and enable the user. So, I disabled that scheduled task.
Then I repeated the test again. I observed the same behavior of user being disabled and enabled again but this time, OIM called an adapter. This is what I observed in the log file:
20988 INFO,20 Oct 2010 12:21:56,519,[XELLERATE.DATABASE],DB read: select evt.ev t_key, evt.evt_name, evt.evt_package, mil.mil_name from mil mil, evt evt w here evt.evt_key = mil.evt_key and mil.mil_key=10
20989 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.DATABASE],select evt.evt_key, ev t.evt_name, evt.evt_package, mil.mil_name from mil mil, evt evt where evt. evt_key = mil.evt_key and mil.mil_key=10
20990 INFO,20 Oct 2010 12:21:56,519,[XELLERATE.PERFORMANCE],Query: DB: 0, LOAD: 0, TOTAL: 0
20991 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.SERVER],Class/Method: tcBusiness Obj/getSqlOperationFromMembers entered.
20992 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.SERVER],Class/Method: tcBusiness Obj/getSqlOperationFromMembers left.
20993 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/getClassLoader entered.
20994 DEBUG,20 Oct 2010 12:21:56,519,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/getClassLoader left.
20995 DEBUG,20 Oct 2010 12:21:56,520,[XELLERATE.ADAPTERS],Class/Method: tcADPCla ssLoader/findClass entered.
20996 INFO,20 Oct 2010 12:21:56,530,[XELLERATE.ADAPTERS],Adapter: Enabling the User was initiated for the task: Enable User.
20997 INFO,20 Oct 2010 12:21:56,531,[XELLERATE.JAVACLIENT],System Event Handler : Enabling the User
I did exactly the same disabling user process at another client and it worked fine. I don't understand what causes OIM to call this system Event handler to re-enable the user.
Please help.
Thanks
KhanhDo you have any Entity Adapter or Event Handler or Trigger which enables user for some condition ?
Check your environment. If you have please remove that and try.
Does this user has and provisioned resource ? If yes, try for some other user which doesn't have resource provisioned.
Maybe you are looking for
-
Error while chaning W. Tax in AP
Dear Experts, I am getting an error while changing W. TAx in A/P invoice i.e. A/P Invoice - Document Total , Field cannot be updated (ODBC -1029)' [Message 131-183]. As A/P is OPEN & has not yet been paid. Help required please. Whereas other APs ar
-
Hi All, I wanted a horizontal slider with dates . Can anybody help please. Thanks
-
We currently have an IDOC in our R/3 System. Whether it is possible for us to convert the IDOC functionality into a WEB Service, if possible how to perform the Task. Thanks.
-
There is a message that says something like "Unrecognised SIM" but the Voice works. Data just doesn't work.
-
When I setup my ipad, I didn't install pages and numbers. How do I get them installed now?