Enable XBRL in 11.1.1.3

Hi,
Can anyone guide me on how to achieve the following in Hyperion 11.1.1.3
Enable the functionality of XBRL in Financial Reporting,
Upload the taxonomy into "xbrlfile" folder, and
Finally upgrade the schema and context in Financial Reporting Studio
If your reference to help document can be guide us to specifig page no's then it would be helpful
Kindly help,
Payous999

All required documentation can be accessed here:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html

Similar Messages

XBRL in Financial Reporting

Has anyone been able to enable XBRL functionality in Financial Reporting? We appear to be experiencing problems in 9.2.0.2 and 9.3.1.

All required documentation can be accessed here:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html

Not null and enable or disable column in tabular form

Hi,
Using apex version 4.1 and working on tabular form.
ACT_COA_SEGMENT_MAS is Master table
and
ACT_SEGMENT_VALUES_MAS is detail table
I have entered 8 rows in master table and PARENT_SEGMENT_ID is column in master table which is null able. If i specified PARENT_SEGMENT_ID with value in master table then in detail table there is column PARENT_ID that should not be null and enable.
How i can enable or disable column when in master table PARENT_SEGMENT_ID column is null then in detail table PARENT_ID column should disable and vice versa.
I have created tabular form on Detail table. before insert into the tabular form Check in master table in first entry if PARENT_SEGMENT_ID is not null in first row of master table then in tabular form PARENT_ID should enable and not null able in corresponding to this first row id's lines in tabular form.
Same should check for second row in master table if PARENT_SEGMENT_ID is not null then entered rows with PARENT_ID into tabular form corresponding to 2nd id in master table should not nullable and column should enable in tabular form.
Thanks & Regards
Vedant
Edited by: Vedant on Jan 9, 2013 9:12 PM

Vedant,
You need to create you own manual tabular form and not use the wizard.
Using APEX_ITEM api you should be build you own form and you will be able to control how you wan to display the rows. (See Link [Apex Item Help|http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CACEEEJE] )
select case when PRIMARY_TABLE_COLUMN is null then APEX_ITEM.DISPLAY_AND_SAVE(3 , DETAIL_COLUMN ) else APEX_ITEM.TEXT(2,detail_column) end "ALIAS" from detail table
Hope that help.
Vivek

"Enable Swipe" don't work and Tablet Layout on a Smartphone

Hi there,
I have two big problems with my own site www.mhgrafikdesign.de:
1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /

This is now a slideshow created with Muse: Homepage
The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
Next to this problem, I also run into these things:
1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js

How do I enable the macbook pro trackpad pinch open and close feature in Firefox?

TYPE OF SYSTEM: Macbook Pro, OSX V 10.5.8
My pinch and zoom function works fine with Safari. Is there a way to enable this feature in Firefox?

You can restore the zoom feature by changing the values of the related prefs on the about:config page.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
* browser.gesture.pinch.latched -> false
*http://kb.mozillazine.org/about:config
See also:
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

Adobe Flash & Javascript don't work even though Enabled

Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
PLEASE HELP as this is crippling for very important work deadlines I have.
This is what else I know and have tried:
I have a Toshiba Satellite C75D-A Laptop;
Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
RAM: 8 MB;
OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
My Device Manager graphics driver updater states: “driver software is up to date.”
From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
I am using Latest Firefox version 35.0.1; and
Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
I turned off hardware acceleration in FF Tools>Options>Advanced>General
I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
I have Windows Media Player and Quicktime installed.
Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
“QuickTime plugin takes over Flash” at:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here)
Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
(I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
& here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
I tried Disabling Protected Mode in Flash 11.3 as explained here:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here).
It did not solve the issue.
I also deleted all storage & data in Flash Player as advised. This had no effect either.
I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!

''guigs2 [[#answer-684038|said]]''
<blockquote>
I truely admire the efforts that have been made to make this work.
"“We are unable to find a driver for your system.” "
For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
</blockquote>
Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
Thanks again!

TS1368 How can I enable my iTunes Store account ?

I need to enable my iTunes Store account , how can I do that ?

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Stores and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Loop Playback enabled or disabled at a glance?

Can't find the way to understand at a glance if Loop Playback is enabled or disabled. Is it possible that FCPX lacks an option like this?

Yes. It's only visible in View>Playback. Use feedback to request it.

Unable to call WSS (WS-Security) enabled Web Service using UTL_DBWS

We are attempting to call a WSS (WS-Security) enabled Web Service from PL/SQL using the UTL_DBWS package (see [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_dbws.htm#CHDIDGJH] ). We are doing this in similar fashion to [http://www.oracle-base.com/articles/10g/utl_dbws10g.php] with calls to utl_dbws.create_service, utl_dbws.create_call and utl_dbws.invoke.
Using this method we can successfully call an unsecured Web Service, but calls to WSS-enabled Web Services fail. We are currently using Oracle Database 10.2.0.3.
The failure we are getting is:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPolicy(S) ): No Security Header found;nested
exception is com.sun.xml.wss.XWSSecurityException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPlicy(S) ): No Security Header found
Apparently UTL_DBWS does not support calling WSS enabled services, although this doesn't appear to be an officially recognised position. Does anyone know if Oracle are planning to support this soon (if ever)? Looking at Re: Calling WS from PL/SQL using WS-security suggests that support has been considered before, but not yet realised.
Thanks,
Tom

Having raised a Service Request with Oracle support on this, I got the following response from Oracle Development (On unpublished bug [8542959|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=8542959]):
Development has confirmed that WS-Security is not supported through UTL_DBWS. They have also acknowledged that this is not documented and they will change the official Oracle documentation will reflect this fact. From what is being stated, it would appear that there is no plan to support the use of WS-Security through UTL_DBWS in any release in the near future.
So, in short, without developing your own home-grown SOAP request, there is no way to call a WSS enabled web service from within PL/SQL.
-Tom

Error while Enabling a user in OIM

Hi,
I have a requirement where i need to disable and enable OIM users based on a UDF . If the UDF says Active user should be enabled and if it says "deleted" user should be disabled. I'm able to "Disable" a user present in "Active" state but not vice versa. My entity adapter is as follows
statusUpdate(String userKey,String Status){
          OIMConnectionManagerImpl oimConn = new OIMConnectionManagerImpl();
          tcUserOperationsIntf tcUser = oimConn.getUserAPI();
          tcResultSet tcres = null;
               HashMap map = new HashMap();
               map.put("Users.Key",userKey);
               tcres = tcUser.findUsers(map);
               String s1=tcres.getStringValue("Users.Status");
               if(Status.equalsIgnoreCase("Active") )
                    if(s1.equalsIgnoreCase("Disabled")){
                         tcUser.enableUser(Long.parseLong(userKey));
               if(Status.equalsIgnoreCase("Deleted") )
                    if(s1.equalsIgnoreCase("Active")){
                         tcUser.disableUser(Long.parseLong(userKey));
My error is as follows
[com.oim.util.OIMConnectionManagerImpl] Unable to create factory instance
java.lang.NullPointerException
Edited by: user10665408 on Jul 1, 2009 3:14 PM

I have done sm changes now:
Try this.
If some import is missing or some spelling mistakes are there just correct those. It's just for reference.
Put import for map also.
package com.Tst.oim;
import Thor.API.Operations.tcUserOperationsIntf;
import Thor.API.tcResultSet;
import Thor.API.tcUtilityFactory;
import com.thortech.xl.crypto.tcCryptoUtil;
import com.thortech.xl.crypto.tcSignatureMessage;
import com.thortech.xl.util.config.ConfigurationClient;
import java.util.Hashtable;
public class CreateFile {
tcUtilityFactory utilFactory = null;
tcSignatureMessage moSignature = null;
tcUserOperationsIntf moUserUtility = null;
tcResultSet userResultSet = null;
ConfigurationClient.ComplexSetting myConfig =
ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
final Hashtable env = myConfig.getAllSettings();
public void Enable(String userid) {
try {
System.out.println("TRY");
moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
moUserUtility = (tcuserOperations)utilfactory.getutility("Thor.API.Operations.tcUserOperations");
Map a = new HashMap();
a.put("Users.User ID", userid);
tcResultSet userset = moUserUtility.findAllUsers(a);
long ukey = userset.getLongValue("Users.Key");
moUserUtility.enableuser(ukey);
} catch (Exception e) {
e.printStackTrace();
Edited by: Dost

I am suddenly getting a message that the 'mobile device services' has stopped working on my computer and windows seems unable to fix. I have tried finding the file and making sure that it is enabled. It says 'enabled' but does not work.

I recently downloaded a new update of the operating system on my 3GS It seems to be a bit slower since and I have no idea if that is part of what is going wrong. I cannot get itunes to recognise my phone. Windows pops up a 'window' that says my 'mobile device services' is not working and would I like Windows to look online for the problem - I say yes, windows does it's thing, blanks out and I am back where I was. I tried updating itunes but no luck.
I found the mobiledeviceservices.exe file and made sure it was all 'on' and 'enabled' still no luck I did a search and came up with some other people who had the same problem but the answers that they were given didn't help me.

When you erased the disk did you select Mac OS Extended Journaled as the format option?

I can no longer order prints, book etc. I have a valid Apple id but it keeps telling me my iclick is enabled?

I can no order prints and books through iphoto. The order areas are greyed out.
I have a valid Apple id - this I have checked in my account information.
I asks me to enable the iclick. A use another Apple id.
Can anyone suggest why this has occured and how I cure it?
I really use this program a lot and find it better than others on the market.

try going to your account in the apple store and re-entering all of yoru information and being sure One CLick is on and try again
LN

How to enable multiple entries for bundling free goods in vbn1?

Hi SAP Gurus,
How can I enable bundling of free goods in SAP using vbn1?
In creating an entry, I place the material number, qty and other required fields then assign the material number of the item that I want to bundle with the 1st product. My problem is that I can only assign 1 material number to a product.
Scenario:
Mat. No. 1 is the main item, then I assign matNo.2 to be budled with matNo.1. I also wanted to assign matNo.3 to be bundled with matNo.1. But unfortunately, When I place another entry using matNo.1. Error says that it is currently being processed. It seems I can only assign a single free goods. How can I set this to multiple?
Thanks in advance!

Hi Colleague,
No. This function is not provided in the R/3 System. Only one record is taken into account during the free goods determination with the existence of several valid condition records. This record is the one with the largest minimum quantity. For this record the system only generates one free goods subitem.
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: #eWith material 1, material 2 and material 3 are free of charge#e or #eIf material 1 and material 2 are ordered at the same time, then material 3 is free of charge#e.
You can refer FAQ note 549963 which clarifies this point.
I hope it can be helpful.
Regards
Ruy Castro

Can we do a Secure FTP for an XML file from ABAP when firewall is enabled?

Hi all,
I have a requirement to send an XML file to an External FTP Server which is out of our corporate network and our firewall is enabled.
I have to send an XML file with Purchase Order details. I completed that with the help of this blog https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/2657. [original link is broken] [original link is broken] [original link is broken]
Now I need to FTP the XML file that is generated. How should I be doing this? Can some of help me with this?
I need to do a Secure FTP to the external non SAP server which is out of our corporate network and our firewall is enabled. Can some one tell me if SFTP is possible in ABAP.
This is not a web service. I am working on dropping an XML file in an external FTP serveru2026 I have searched the forums but still in a confusion if weather Secure FTP is possible in ABAP or not when our company firewall is enabledu2026
If some one encountered this situation earlier please help,,,..any help will be highly appreciated.
Regards,
Jessica Sam

Thanks a lot for your valuable suggestions Richu2026
I agree with you Rich that web services would be a better option. But I need to send this file to an external third party and they dont have web services.
They are telling us that either we can send them an XML file or a CSV file in the format that they want. We decided to go with XML file format.
I am done with formatting the Purchase Order details in the format that they want. Now the challenge is that I need to send this FTP file to them and it should be a Secure FTP when our fire wall is enabled,
When you say
1) Run an ABAP program to generate the XML file and put it on the local PC
2) Log into the FTP site via some FTP client, could simply be windows as well.
3) Manually cut/paste the file from the PC to the FTP site.
For Step 1 running ABAP Program can I schedule a batch job?
For Step 2 and Step 3 can I automate it in any other way..if not in ABAP?
Can I advice my company to follow any alternate method in which they can automate this step 2 and step 3u2026if not in ABAP can it be possible in any other way as the third party does not have web services I now have no other alternative.
Please Helpu2026
Regards,
Jessica Sam

Issue in enabling dbx rtc for memory leak analysis

Any help on this is highly appreciated ...
Following is the issue:
pass@odcsmoke1> dbx -C xfer
changes (topic)
The major new features of this release relative to 6.1 are:
o The dbx environment variable "rtc_use_traps" has been removed.
Traps are used automatically as long as the hardware is UltraSparc.
o There is now some basic support for looking at core files from
different versions of Solaris. See `help core mismatch' for details.
o Stepping to a specific function support. See `help step to' for details.
o Fortran intrinsics support on Intel has been removed.
o Dbx automatically translates some old dbxenv variables to their new
names. See `help dbxenv' for details.
o The default command-line editing mode is now emacs. See "How do I enable
command-line editing?" in FAQ for details (`help FAQ').
o Two new collector commands have been implemented: `pause' and `resume'.
See `help collector' for details.
o The collector enable_once command has been removed.
o The collector store command has been extended to include experiment groups.
See also `help changes61'
To suppress this message, add the following line to your .dbxrc file:
dbxenv suppress_startup_message 6.2
Reading xfer
Reading ld.so.1
Reading librtc.so
Reading libm.so.1
Reading libnsl.so.1
Reading libresolv.so.2
Reading libc.so.1
Reading libgen.so.1
Reading libdl.so.1
Reading librt.so.1
Reading libpthread.so.1
Reading libthread.so.1
Reading libsocket.so.1
Reading libxfermain.so
Reading libpass.so
Reading libarsapic.so
Reading libarsrecordc.so
Reading libiaconfig.so
Reading libarsconfig.so
Reading libclientsock.so
Reading libaio.so.1
Reading libmd5.so.1
detected a multithreaded program
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) check -all
access checking - ON
memuse checking - ON
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) check -leaks
leaks checking - ON
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) stop in main
More than one identifier 'main'.
Select one of the following:
0) Cancel
1) `xfer`xfer.c`main
2) `libxfermain.so`xfer.c`main
a) All
1(2) stop in main
-d ecpix.conf -g y -P n <
Running: xfer -f rbi_1.cfg -d ecpix.conf -g y -P n
(process id 33)
dbx: warning: A threaded program is not initializing libthread first!
*/opt/SUNWspro/WS6U2/lib/dbxruntime/librtc.so came before it.*
dbx: warning: A threaded program is not initializing libthread first!
/lib/libc.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libnsl.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libsocket.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libresolv.so.2 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libgen.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libaio.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libmd5.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/librt.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libpass.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libclientsock.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsrecordc.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libiaconfig.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsapic.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsconfig.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libxfermain.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/etc/xfer came before it.
stopped in main at line 461 in file "xfer.c"
461 CHAR *Etc_Dir="/usr/pass/etc/";
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) showmemuse
dbx: warning: check -leaks/-memuse must be issued before the run command for showmemuse to be used(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx)
pass@odcsmoke1> uname -a
SunOS odcsmoke1 5.10 Generic_118822-30 sun4u sparc SUNW,Sun-Fire-V250

Andrew is right, dbx 6.2 is very old; technically, it is supported on Solaris 10, but as you can see for yourself, there are issues to be fixed.
Only limited support is available for this version, so if you have a support contract, please report this problem through the support channel. Better yet (and in case if you don't have support contract), upgrade to a more modern version. Since you are on Solaris 10, I'd recommend latest version of Sun Studio - 12 update 1; it is free for all uses and can be downloaded from here: http://developers.sun.com/sunstudio/downloads/.
Should you have any questions about the upgrade, please post it here.

Enable XBRL in 11.1.1.3

Similar Messages

Maybe you are looking for