EnableUsageTypes Error in Modulecall: SDM call of jstartup

Hello Experts,
installing NetWewaver 7.0
an error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > MaxDB > Central System > Central System( Last error reported by the step :Caught ESAPinstException in Modulecall: SDM call of jstartup mode=standalone ends with returncode 4.)
Log Message:
ERROR 2008-08-13 11:49:29.802
FCO-00011 The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :Caught ESAPinstException in Modulecall: SDM call of jstartup mode=standalone ends with returncode 4.).
Can I jstartup manually or is there an other solution?
Many thanks for help in advance.
Best Regards
Bernd

StartServer in folder \SDM\program enables SDM to start separately.

Similar Messages

Install java Engine+SDM call of changepassword

HI,
I am Installing ECC 6.0 on solaris 10 with MaxDB 7.6. I am getting an error at install java engine. pls find the logs
JAVA Version is 1.4.2_15, AMD X64 machine.
It is not able to find the SDM directory...
bash-3.00# cat SDMautoinstall.log
Host name: subqas
Create SDM directories:
Create SDM home directory:
Directory for SDMHome '/usr/sap/SSQ/DVEBMGS00/SDM/program' doesn't exist yet.
Directory '/usr/sap/SSQ/DVEBMGS00/SDM/program' created
Create SDM root directory:
Directory '/usr/sap/SSQ/DVEBMGS00/SDM/root' created
Extracting packed repository.
Created repository file.
Extracting packed root JAR
Successfully installed SDM on /usr/sap/SSQ/DVEBMGS00/SDM/program
Now, adjust substitution parameters and SDM configuration properly.
After that, deploy all components with unknown filesystem location. Probably, these components have been excluded by request when packing the SDM installation.
Finally, redeploy all filesystem SDAs using the SDM command deploy with parameter softwaretype=FS
Successfully executed. Return code: 0
java.log
bash-3.00# cat java.log
Error occurred during initialization of VM
java.lang.Error: Properties init: Could not determine current working directory
sapinst.log
WARNING 2008-01-05 17:59:03
Execution of the command "/usr/jdk/j2sdk1.4.2_15/bin/java -Xmx256M -Djava.ext.dirs=/usr/sap/SSQ/DVEBMGS00/SDM/program/lib:/usr/jdk/j2sdk1.4.2_15/jre/lib/ext -d64 -jar /usr/sap/SSQ/DVEBMGS00/SDM/program/bin/SDM.jar changepassword XXXXXX sdmhome=/usr/sap/SSQ/DVEBMGS00/SDM/program logfile=/tmp/sapinst_instdir/ERP/SYSTEM/ADA/CENTRAL/AS/callSdmViaSapinst.log" finished with return code 1. Output: Error occurred during initialization of VMjava.lang.Error: Properties init: Could not determine current working directory.
ERROR 2008-01-05 17:59:03
MUT-02041 SDM call of changepassword ends with returncode 1
ERROR 2008-01-05 17:59:03
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2008-01-05 17:59:03
FCO-00011 The step setSDMPassword with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|setSDMPassword was executed with status ERROR .
Thanks,
Mahesh

Hello Mahesh
-> Did you solve your problem?
-> If not...   Is the <sid>adm user member of group sapinst ?
    Please check once more the permissions of user <sid>adm (read/write)
    installations path, check directories under /tmp/... and make sure that
    <sid>adm has access to all directories involved.
-> If this does not resolve the problem can you please update with more information from the following files:
sapinst.log
sapinst_dev.log
keydb.xml
control.xml
java.log
jload_java.log
Thank you and best regards, Natalia Khlopina

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

Error while executing SDM process phase with action DEPLOY_SLOT

Hi,
I am upgrading CRM 2007 to CRM 7.0 and got an error in Java side.
Following is DEPLOY_SLOT_1_DON_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG]/>
<!PATTERN[DEPLOY_SLOT_1__DON_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 20, 2009 4:15:48 AM Info:
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: = Starting to execute command 'deploy' =
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: Starting SDM - Software Deployment Manager...
May 20, 2009 4:15:49 AM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
May 20, 2009 4:15:51 AM Info: SDM operation mode successfully set to: Standalone
May 20, 2009 4:15:52 AM Info: Initializing Network Manager (50017)
May 20, 2009 4:15:52 AM Info: Checking if another SDM is running on port 50018
May 20, 2009 4:15:53 AM Info: -
Starting deployment -
May 20, 2009 4:15:53 AM Info: Error handling strategy: OnErrorSkipDepending
May 20, 2009 4:15:53 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
May 20, 2009 4:15:53 AM Info: Update strategy: UpdateLowerVersions
May 20, 2009 4:15:53 AM Info: Starting deployment prerequisites:
May 20, 2009 4:15:55 AM Info: Loading selected archives...
May 20, 2009 4:15:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA'
May 20, 2009 4:16:43 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA'
May 20, 2009 4:16:48 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA'
May 20, 2009 4:16:50 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA'
May 20, 2009 4:17:00 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA'
May 20, 2009 4:17:02 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA'
May 20, 2009 4:17:13 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA'
May 20, 2009 4:17:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA'
May 20, 2009 4:17:31 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA'
May 20, 2009 4:17:35 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA'
May 20, 2009 4:17:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA'
May 20, 2009 4:18:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA'
May 20, 2009 4:18:04 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA'
May 20, 2009 4:18:08 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA'
May 20, 2009 4:18:09 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA'
May 20, 2009 4:18:10 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA'
May 20, 2009 4:18:13 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA'
May 20, 2009 4:18:20 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA'
May 20, 2009 4:18:26 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA'
May 20, 2009 4:18:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA'
May 20, 2009 4:18:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA'
May 20, 2009 4:18:50 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA'
May 20, 2009 4:18:51 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA'
May 20, 2009 4:18:56 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA'
May 20, 2009 4:19:03 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA'
May 20, 2009 4:19:10 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA'
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
May 20, 2009 4:19:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA'
May 20, 2009 4:19:48 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA'
May 20, 2009 4:19:49 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA'
May 20, 2009 4:20:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA'
May 20, 2009 4:21:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA'
May 20, 2009 4:21:39 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA'
May 20, 2009 4:23:18 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA'
May 20, 2009 4:23:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA'
May 20, 2009 4:23:27 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA'
May 20, 2009 4:23:33 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA'
May 20, 2009 4:23:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA'
May 20, 2009 4:23:54 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA'
May 20, 2009 4:23:58 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA'
May 20, 2009 4:23:59 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA'
May 20, 2009 4:24:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA'
May 20, 2009 4:24:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA'
May 20, 2009 4:24:05 AM Error: Error while loading selected archives.
May 20, 2009 4:24:05 AM Error: Prerequisites were aborted.
May 20, 2009 4:24:13 AM Error: Error while loading selected archives.
May 20, 2009 4:24:13 AM Info: Summarizing the deployment results:
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA
May 20, 2009 4:24:13 AM Error: Precondition violated: C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA
May 20, 2009 4:24:13 AM Error: Processing error. Return code: 4
It appears to me that somehow there is a component conflict:
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
Is it advisable at all to manually delete the above LMTOOLS03_01.SCA from the location and try again or this will lead to more errors?
Please help ASAP, thanks a lot,
Shival

Following is the trouble ticket information:
Trouble Ticket Report
Upgrade to Enhancement Package 1 SR1 for SAP NetWeaver/ SAP Business Suite 7 SR1
SID................: CD1
Hostname...........: nbg-dev-cd1
Install directory..: c:/usr/sap/CD1
Upgrade directory..: C:\usr\sap\jupgrade
Database...........: SAP DB
Operating System...: NT
JDK version........: 1.4.2_15 Sun Microsystems Inc.
SAPJup version.....: 1.5.6
Source release.....: 700
Target release.....: 700
Current usages.....: AS;EP;EPC;BP-CRM;JCRM;AAS
ABAP stack present.: true
The execution of UPGRADE/UPGRADE/DEPLOY_ONLINE ended in error.
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
Cannot execute Java process for deployList with parameters C:/usr/sap/jupgrade/tmp/SLOT.DEPLOY.LST.
Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.
More information can be found in the log file C:\usr\sap\jupgrade\log\DEPLOY_ONLINE_DON_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess
com.sap.sdt.ucp.phases.PhaseException
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
DEPLOY_ONLINE
UPGRADE
NetWeaver Upgrade
SAPJup
Java Upgrade

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error message in BAPI call

I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
How to get error message in BAPI call when error occurs?
I can catch an exception in BPM but I need to get error message and send it to another system.

Hi Denis,
>>>I have imported RFC Interfaces from SAP system. Each interfaces doesn't have fault message.
if you want to use fault messages
consider using ABAP Proxies
>>>>How to get error message in BAPI call when error occurs?
most bapis have return table in which they
return error messages (you can do it either
in a sync way or in an async way if the call is too long - with corrlelation of course)
Regards,
michal

Error message when I calling planning layout in the STS

Dear
I'm trying to use Status and Tracking System with BPS ( SEM 4.0 SP10, BW 3.5 SP14 ).
But I got some error messages when I calling planning layout in the STS screen..
I designed 2 lower unit(A,B) and 1 upper unit(C) for the test. and using Bottom-up work-flow.
I did
1. Create Planning Area in the BPS0 ( also Level, Package, Layout ..)
2. Created Web Interface in the Web Interface Builder using the upper BPS Layout .
3. Customizing STS
    - Create Sub Plan & Session
    - Asssign Hierarchy to Sub Plan
    - Determine attribute for created planning session ( Bottom-up, Auto mail )
    - Define Header characteristics for planning session to contains the planning package completely.
    - Determine Date, Person Responsible and Layout.
4. Send Start mail
5. Open STS Web Start Screen ( using B Unit responsible user .)
When he click "Open Planning" icon in the screen the following error messages were happened...
I've no idea for that because I didn't use any variables or offset settings.
I guess that comes from header settings for the planning session because when I deleted the header settings for the planning sessions, I could see the planning layout.
but I could not use lock processing in the STS.
Could you tell me what's happening to me?
[ Following error message ]
Correct the data on variables and offset in character string "?
Message Number UPC_FW092
Long Text Diagnosis
Character string "", which contains data on the variables and offset, has an invalid format, and cannot be converted.
Procedure
Correct the character string, so that it has the correct format. A correct entry on variable and offset has the following form:
<VARIABLE_NAME> [{ + | - } OFFSET]
Examples:
VAR0
VAR1+1
VAR2 - 2.
Also check whether the variable, that you want to use is available in the planning area.

Hello,
this seems to be a bug. The error message should include a variable name between ''. Since there is none, the function that raises the error was not called correctly.
It's not likely that this is related to STS since STS does not use variables at all. It's probably a problem with the layout. If you can't resolve it, please open a message to SAP Support.
Regards
Marc
SAP NetWeaver RIG

Intermittent Runtime error - pure virtual function call

I have an intermittent runtime error - pure virtual function call & don't know what cause it? Since It only occurs & crashes once awhile therefore it's difficult to trap it for debugging.I suspect it come from TestStand ActiveX API which I use in my User Interface Application project but I'm not really sure.
Does anyone experience this kind of problem when working with TestStand API ? If so any
suggestion? I have noticed in the TestStand API header file teapi.tlh contain many raw_.... function defined as pure virtual function. What are these raw_... function ? I don't think I use any of these function in my project.
Many thanks!

Danh,
I don't believe that your problem can be solved with the information you have provided unless someone else has experienced the same symtpoms which coincidentally have the same cause as in your case.
Is there any other information you can provide that can help localize the problem?
1) What is happening when the error occurs?
2) Does the error always occur in the same place?
3) Does it always occur with use of certain resources (e.g. DAQ, GPIB, VISA, printer)?
4) Does it occur when using the sequence editor?
5) Does it occur when using one of the shipping operator interfaces?
6) Does it occur only when using your operator interfaces?
7)Is it related to a specific sequence or any sequence?
8) Does it happen when you executed your sequence with/without a process model entr
y point (i.e. Execute>>Test UUTs, Execute>>Singal Pass or Execute>>Run MainSequence)?
9) How often does it happen?
10) What version of TestStand are you using?
11) With what language (include versions) are you programming your code modules?
12) With what language (include versions) are you programming your operator interface?
13) Is there any error code reported with this error message?
14) Is this error reported in a TS run-time error dialog or is it reported directly 1by the operating system?
15) Have you searched the web for related errors? For example, the following link describes a particular programming mistake that can lead to this error
http://support.microsoft.com/support/kb/articles/Q125/7/49.asp
By investigating answers to the above questions you may be able to narrow the cause of this error, which might allow you or others to help solve the problem.

Error "pure virtual function call"

Hi,
Windows7, PCI-GPIB, NI-488.2 Version 3.1.1, Visual Studio 2010 C++ Application.
Randomly between 10 minuntes and 4 hours I get the error "pure virtual function call"
With the debbuger attached to the process in error I identified NI4882.dll as the source of the error.
Then I deinstalled NI-488.2 Version 3.1.1 and installed NI488.2 July 2000. Then my application runs without any error!
I tried to attach the source files which represents the interface between my application and the NI-4882 driver but it did not work for the C++ file.
Any help appreciated.
Best Regards
Walter
Attachments:
_GPIB.h ‏4 KB

Part 2:
Int TGpib::Open (UShort adr, ULong timeoutMs)
if (mDevices.empty ())
Reset ();
Int ud = ibdev (mBoardID, adr, 0, TimeoutCode (timeoutMs), 1, 0);
if (ud < 0)
MCTraceLib (this, eTraceError, TFCTX, _T("open device '%d' failed"), adr);
GPIBError (-1, FCTX, true);
return -1;
SDevInfo devInf;
devInf.mGpibAdr = adr;
mDevices[ud] = devInf;
if (!DeviceClear (ud))
MCTraceLib (this, eTraceError, TFCTX, _T("no device on address '%d'"), adr);
GPIBError (ud, FCTX, true);
Close (ud);
return -1;
if (Send (ud, "*IDN?"))
Tstring s = String2Tstring (Enter (ud));
StringList l = Split (s, _T(','));
if (l.size () == 4)
mDevices[ud].mVendorName = l[0];
mDevices[ud].mModelName = l[1];
else
MCTraceLib (this, eTraceError, TFCTX, _T("no device on address '%d'"), adr);
GPIBError (ud, FCTX, true);
Close (ud);
return -1;
Local (ud);
return ud;
bool TGpib::Close (Int ud)
GPIBDevMap::iterator it = mDevices.find (ud);
if (it != mDevices.end ())
Local (ud);
Int stat = ibonl (ud, 0);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("close device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
mDevices.erase (it);
return true;
return false;
bool TGpib::SetTimeout (Int ud, ULong timeoutMs)
Int stat = ibtmo (ud, TimeoutCode (timeoutMs));
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("set timeout device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
return true;
ULong TGpib::Timeout ()
return mTimeout;
bool TGpib::EnableSRQ (Int ud, HANDLE srqEvent)
if (srqEvent != INVALID_HANDLE_VALUE)
GPIBDevMap::iterator it = mDevices.find (ud);
if (it != mDevices.end ())
(it->second).mSRQEvent = srqEvent;
Int stat = ibnotify (mBoardID, SRQI, GpibSRQ, (void*)this);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
MCTraceLib (this, eTraceDebug, TFCTX, _T("(SRQ)on device ud = '%d' success"), ud);
return true;
else
MCTraceLib (this, eTraceError, TFCTX, _T("srqEvent == INVALID_HANDLE_VALUE"));
return false;
bool TGpib::DisableSRQ (Int /*ud*/)
return true;
bool TGpib::Remote (Int ud)
Int adr;
ibask (ud, IbaPAD, &adr);
adr += 32; // Talk Address = Listen Address + 32
char cmdbuf[] = {MTA0, 0, LLO, UNT, UNL};
cmdbuf[1] = char(adr);
Int stat = ibcmd (mBoardID, &cmdbuf, 5);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
mDevices[ud].mRemote = true;
return true;
bool TGpib::Local (Int ud)
mDevices[ud].mRemote = false;
Int stat = ibloc (ud);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
return true;
char TGpib::SerialPoll (Int ud)
char pollChr;
Int stat = ibrsp (ud, &pollChr);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
return static_cast<char> (pollChr & 0x9F); // VM QueryError eliminieren
bool TGpib::DeviceClear (Int ud)
Int stat = ibclr (ud);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX, true);
return false;
return true;
bool TGpib::Trigger (Int ud)
Int stat = ibtrg (ud);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
return true;
bool TGpib::Send (Int ud, const std::string& str)
Int stat = ibeot (ud, 1);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("'EOI on' on ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
stat = ibwrt (ud, (void*)str.c_str (), str.length ());
Long sent = ThreadIbcntl ();
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
if (sent != static_cast<Long> (str.length ()))
MCTraceLib (this, eTraceError, TFCTX, _T("only %d of %d characters sent"), sent, str.length ());
return false;
return true;
bool TGpib::SendNoEOI (Int ud, const std::string& str)
Int stat = ibeot (ud, 0);
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("'EOI off' on ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
stat = ibwrt (ud, (void*)str.c_str (), str.length ());
Long sent = ThreadIbcntl ();
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
return false;
if (sent != static_cast<Long> (str.length ()))
MCTraceLib (this, eTraceError, TFCTX, _T("only %d of %d characters sent"), sent, str.length ());
return false;
return true;
std::string TGpib::Enter (Int ud)
std::string str = "";
char* buf = new char[2048];
Int stat = ibrd (ud, (void*)buf, 2047);
Long got = ThreadIbcntl ();
if ((stat & ERR) != 0)
MCTraceLib (this, eTraceError, TFCTX, _T("on device ud = '%d' failed"), ud);
GPIBError (ud, FCTX);
else
buf[got] = '\0';
str = buf;
// eventuelle LF und CR vom Ende entfernen!
string::size_type idx = str.find_last_of (k_CR);
str = str.substr (0, idx);
idx = str.find_last_of (k_LF);
str = str.substr (0, idx);
delete[] buf;
return str;

Error: The AcquireConnection method call to the connection manager failed with error code 0xC0202009 using DB2 connection

I have a SSIS project that I am newly running on the SQL server (2005) . It was previously run on my PC. I am importing data from a DB2 server to the SQL server.
I am in the SA group on the server
My connection to DB2 works
When open the package and run it in preview mode, I can retrieve the data.
When I execute the package I get the below errors:
[MIDAS OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "NGMDSPA.alharris" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "MIDAS OLE DB Source" (1) failed validation and returned error code 0xC020801C.
What I have already done that has not worked:
The original Protection level was set to EncryptSensitiveWithPassword.
I have reset the Package Password.
I have set the protection level to DontSaveSensitive
I saved the package on the server and set a Package Password.
I created a new package, set the Protection level to DontSaveSensitive, set a package password in a configuration file using the Package Configuration Wizard.
Error continues

Yes. The Drivers are installed and I have a successfull connection. I am trouble shooting the issue on the server in BIDS. I can connect to the DB2 server via the Connectionmanager. I can also preview the data in the OLE
DB source connection. Therefore I know that I have a proper connection
If you're setting option as DontSaveSensitive then you need to pass the connection information from configuration file/ config table. Otherwise it wont be able to use it for connecting to your source/destination servers. This is the recommended way as it
will enable you to change connection info at runtime.
If you want connection info to persist you need to use protection level as EncryptSensitiveUsingUserKey or EncryptSensitiveUsingPassword and set a password.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error [2] in bind() call!

hello
my weblogic was working perfectly yesterday. then some genius installed some windows updates on my machine and now i get this message whenever i try to run my weblogic server:
Error [2] in bind() call!
err:: No such file or directory
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
FATAL ERROR in native method: No transports initialized
i have spent all morning trying to fix it. tried various methods found via google such as copying dt_socket.dll into system32 folder etc.. makes no difference at all.
any ideas what may be causing this? or the best place to look?
?:| help! thanks in advance.

yes.
stop IIS if you have it installed and any other applications which you may think could be using the port required. i also had to quit skype and a couple of other messenger applications.
hope that works!

MSS - Business Event Details - Error Unexpected Exception when Calling RFC

Dear Experts,
Manager is getting the Error "Unexpected Exception when Calling RFC from Profile Application 'Business Event' when he tries to get the Training history of ONE employee in MSS. However, he is getting the details for the other employees of his department.
Any inputs on this?
Thank you.

I believe it is our custom iView that is incorrect.

ACCESS.ERROR: Authorization check for caller assignment to J2EESecurityRole

Hi
After updating our portal (NW04 SP20) this new error occurs in the default.trc log.
<i>ACCESS.ERROR: Authorization check for caller assignment to J2EE security role [service.jms.default.authorization : administrators] referencing J2EE security role [SAP-J2EE-Engine : administrators].</i>
I have not found anything helpfull thusfar.
Thank you for your help in advance

Hi,
We had the same problem after upgrading to 2004s sp13.
We applied all available patches and it went away.
Check out this thread:
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0">https://www.sdn.sap.com/irj/sdn/thread?threadID=614693&tstart=0</a>
Best regards,
Avisahi Zamir

EnableUsageTypes Error in Modulecall: SDM call of jstartup

Similar Messages

Maybe you are looking for