Enabling a customer info type for fast entry

I would like to enable a customer info type, info type in the 9000 range, for fast entry. Your assistance in this regard will be greatly appreciated.

Hi Mark
Thanks for your help in this forum, as always.
I was able to add the new contact type to the table from SM30 but as mentioned in my original question, the contacts created using this new contact type is not editable. When a business user opens the work item at a later day and wishes to update the contact, the change button is not appearing against these contacts. We can see the change button against every other item which were created using the SAP delivered options.
I was wondering if there is any other table where we can maintain an entry to make this editable.

Similar Messages

  • How to change the entry screen for Fast entry

    Hi,
    My scenario is that I want to allow my user to enter the cost assignment as well for infotype 14, 15 and 2010 in the fast entry. I noticed that there is actually a screen in the module pool mp001400, mp001500 and mp200000 which include those 'cost assignment'  fields.
    For example, in mp001500, screen 2000 is the standard one while screen 5100 is the one with the 'cost assignment' fields. So I created an entry for mp001500 screen 5100 in table T588M and saved it. However, when I try to use the transaction PA70 to create it0015 records again, it still use the standard screen 2000.
    What else I have to do so that when I use PA70, screen 5100 will be called up.
    Thanks,
    Francis

    Hi there. Go into the IMG through transaction SPRO and follow this path:
    Personnel management -> Personnel administration -> Customizing procedures -> Infotype Menus -> Set up infotype menu for fast data entry.  Then select "screen types for fast data entry" and click the "choose" button.  You can now see each infotype that is included in fast entry, the default screen, and the fast data entry screen.  We use screen 5100 in certain cases for infotypes 0014 and 0015, so we have two entries in this table for each of those infotypes.  Here are the values we have:
    infotype, screen control, default value, fast data entry, selection report
    0014 (blank) 4000 5000 RPLFST00
    0014 01 4100 5100 RPLFST00
    0015 (blank) 4000 5000 RPLFST00
    0015 01 4100 5100 RPLFST00
    We are on ERP2005.  I hope this helps.
    - April King
    Message was edited by:
            April King

  • Problem in HR Custom Info Type Creation

    Hi,
    Created custom info type from PM01...
    Activated... This is working fine in the System and Client where I created.
    But its not working from other client..?
    I am getting error by saying that Info Type is not created... All the Structure and PAXXXX table got activated in both Clients.
    Earlier we faced same problem, at that time our team made some changes to info type and probelm resolved.
    I don't know where and what exactly we need to do...
    But,
    One of the problem I identified is,
    We are not getting T591A, T591S tables at Subtype Tab, Subtype text tab in INFOTYPE CHARACTERSTICS.
    I can enter these two from TECHNICAL ATTRIBUTES... but when I generate all aobjects from PM01, these two values getting deleted from INFOTYPE CHARACTERSTICS.
    (Above may be the reason)
    Please let me know if any solution for this.
    Thanks,
    Naveen Inuganti

    Hi Gautham,
    I deleted previous one, Created as your blog says. Still same problem.
    Venkat,
    Yes, you are correct. We need to release the Customizing request which contains Subtype , Subtype Text Tables with Info Type Entries.
    Problem with Info type Creation
    Thanks,
    Naveen.I

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Problem with customized info type creation

    hi
    When i am creating customized info type using T-code PM01, i get error message like "package in non original system only modifiable with organizer tools".
    The above message is coming whenever save the infotype in either customized package or local package.
    As per my observation when i save the infotype, it default takes SAP package So i need to change that package.So how can i change the package in T-code PM01.
    Please tell me the solution to overcome the error.
    Thanks,
    Ali

    Hi,
    Since infotype attribute in table T582A is clent specific, so you should maintain the entries in the target client.
    Create the table entry of your infotype in the other client in view V_T582A (infotype attribute) or via t-code PM01 and click button 'infotype characteristics. Also you can transport CR from client to client via t-code SCC1 as well.
    Hope helps,
    Chen Jian

  • Changing screen layout of custom info type

    Hi we created a new custom info type from std info type 0002 .We want to realign the fields in the generated info type,but we get an syntax error if we chg it from the screen editor ... can u tell me how to chg it?

    Have you read <a href="http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf">Developing an Infotype in Personnel Administration</a> before creating your new infotype ?
    Look at pages 16-25. (in peculiar look for T588M and modification groups)
    Regards

  • Document types for late entry using bar code

    Hi,
    We want to enable bar codes for Delivery document types for late
    archiving.
    We got the same for slaes order type in below mentioned path
    SPRO --> Sales and Distribution --> Data transfer and Archiving -->
    Assign document type --> Document types for late entry using bar code
    or Transaction code VNOP.
    We want similar transaction for delivery document type i.e. LF also so
    that we can assign archive document type for the same.
    Thanks,
    Preethish

    Hi Alex,
    For Character devices, you have to use SAPConsole. 
    For GUI devices if you want to use online, it should be ITSMobile(Earlier this was WebSAPConsole).
    Thanks.
    with regards,
    Muthu Ganapathy.

  • Implementing a custom process type for a process chain

    I have created a custom process type for a process chain that allows a user to send back a failure or error status when calling an ABAP program.  I copied the class that is used from the existing ABAP process type as a template. 
    The process type works fine, I just cannot find out how to recreate the documentation for my custom type using free text. When you maintain the process type there is a field for the documentation object, but I can't find where in SAP to implement this.
    I have tried looking at the document maintenance using SE61 and looking into the class documentation from SE24 with no success.  The only detail that is provided in the SAP help portal is:
    "If necessary, assign a documentation type and a docu. object to the process type. The docu object can be called up via F1 in the process chain maintenance overview tree. "
    Does anyone out there have any experience with this that can push me in the right direction?
    Thanks,
    Eddie

    You can create and maintain system documentation from transaction SE61. This is how you would create documentation for a process type or if you wanted to create a book. <a href="http://help.sap.com/saphelp_nw04/helpdata/en/a4/d47df949e111d189730000e8322d00/frameset.htm">more info</a>
    Here are the steps to make your documentation similar to that used for the ABAP process type:
    From transaction SE61:
    -Create a document of type TX (either from scratch or by copying RSPC_ABAP which is used for the SAP-delivered ABAP process type)
    -Make any changes you need. I suggest downloading the document in ITF format and make the changes in a basic text editor and then uploading your changed document. It's a little easier to tell what is going on that way.
    Now on to transaction RSPC.
    Once you save your changes, go to RSPC and select on any chain you have to get into the "plan and check views of process chain maintenance." Then just go to Settings -> Maintain Process Types.
    From here you can select your process type, select TX from the document type dropdown, and then enter the name of your document in the docu. object field.
    Hope that helps.

  • Output type for Gate entry Pass

    Hi,
    what is the output type for gate entry pass(LECI). I am searching in NACE but it is not getting. Please co

    Hi,
    there no out type for that you have to create z one ,by copying  standard
    Regards
    Kailas Ugale

  • PPCI: Create customer info type

    Hi,
    I tried to create a new info type for OM. I used PPCI but get the following error.
    Any ideas why i can't successfully create info type 9010
    Structure HRI9010 exists
    Structure P9010 does not exist
    Table HRP9010 does not exist
        HRP9010 not created in the database
        Database index XXXX not created
    Module pool
    Module pool MP901000 does not exist
    Include MP901020 does not exist
    Include MP9010BI does not exist

    hi
    this link might be useful
    how to create OM Infotype
    Regards
    sameer

  • Problem to create HR customized info type

    Hi Guys,
    When i am creating customized info type using T-code PM01,  i get error message like "package in non original system only modifiable with organizer tools".
    The above message is coming whenever save the infotype in either customized package or local package.
    Please tell me the solution to overcome the error.
    thanks.

    Phani,
    In PM01, under create tab when you enter Custom Infotype number and hit enter Which System does it show as Original System (under attributes group), per my understanding it should have been SAP (I Guess), So choose a Package such that your Original System is the system you are working on.
    Hope this helps!
    Regards
    Shital

  • Custom class type for Plant material

    Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
    thanks,

    Hi Rahul,
    The Classification data in material master can only be maintianed at Client level and not at plant level.
    The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
    Regards,
    kathir

  • User exist to create custom error messge for service entry sheet

    Hi,
    Can any body tell me any user exist to create custom error messge for service entry sheet?
    Thanks,

    Hi
    Can you please elaborate on the business scenario??
    You may look at EXIT_SAPLMLSR_020 or EXIT_SAPLMLSR_021 for this purpose.
    Regards
    Prasad

  • Custom movement type for automatic movement

    Hi,
    We are doing cycle count inventory using warehouse management. When we clear the difference, system posts material document with movement types 711 or 712 for loss or gain.
    We need to clear the difference for some materials using seperate movement types for reporting purpose. So, we created new movement types 911 / 912 and assigned the transactions to it in "Materials Management-Inventory Management and Physical Inventory-Movement Types-Copy, Change Movement Types". However, system still takes movement type 711 / 712.
    Also, I think if we make it work, it will be applicable to all materials and not certain materials.
    Any idea where I need to configure other than above setting?
    Shekhar

    Hi,
    You have created a new movement types, but check whether you have defined this movement types in WM.
    Please maintain the Customizing entry in the below mentioned path,
    goto >> SPRO->Logistics Execution->Warehouse Management->Activities->Transfers->Define Movement Types
    Maintain your entry here and save the customization settings.
    This movement types will be applicable to all the material unless and until you specify some special stock indicator while modifying the movement type.

  • Custom marker types for Prelude?

    What would be the way to add a custom marker type to Prelude, that could be used in addition to the default 6 marker types (subclip, comment, flash cue, weblink, chapter and speech)?
    I would like to have an ability to add a set of properties with a specific in-out time boundary to clips.  Looking into the CC Extension Builder and going through the Prelude API docs, but haven't found info on this yet.
    Through this forum, I understand that one can define a custom metadata schema, but that seems to allow new metedata for the entire clip, without the in-out time.   I also see that Prelude provides an UI to define marker templates, but it seems like templates would be based on existing marker types, thus I cannot add new property set(s) there.

    Hi Lei,
    I've put together a simple proof-of-concept build, and I have a bunch of questions(again).  May I ask you to take a look at the build here and share your insight when convenient?    Please let me know if there's a better place to do this than this forum.
    In general, it is great that custom markers and their base properties can be viewed alongside the standard markers.  I think it makes sense that our extension is responsible for providing UI for creating and editing the details of these markers.  I'm wondering how I can improve the integration of our markers into the existing UI, meanwhile.
    1) For the jsx run script error, is there a way to catch it as a caller, as opposed to displaying the alert dialog to the end user?
    2) Documentation about the marker xml format in general?  What is tagList?
    3) Is there a way to create a new marker type button in the "Marker Type" panel without adding an actual marker to the timeline?
    4) Any suggestion about better integrating with the Marker Type, Timeline and Marker Inspector panels in general?  For example it'll be nice if we can set color for our markers, if our markers can be grouped in subcategory in the pull-down menu, etc...
    5) Related to (2), it's not clear to me what the allowed characters are for xml.  I'm seeing that newline and blackout characters seems to be a problem in xml for addMarker call.    Is it intentional?  I also saw that a single-quote goes through, but occasionally (not always) comes back as "apos;" in the xml for that event's callback, example below.
    <key>cuePointParams</key>\n<prop.list>\n<key>object-caption</key>\n<string>As a failsafe, ark-brains were programmed to preserve Votan life by any means. In this case, that meant temporarily repairing the damage to Sukar caused by the Razor Rain storm. Unfortunately, some ark-brain fragments became damaged when they fell to Earth. These corrupted AIs built new bodies for themselves out of scrap machinery. You&apos;ll see them in the video game...they&apos;re called Scrappers.</string>
    Thanks much,
    Chihiro

Maybe you are looking for