Enabling a field in a Datasource

Hi,
I need to enable GUID_PLAN in datasource 0AUD_AUDIT.
When I try to enable the selection option in datasource edit mode using RSA6, I dont see the field GUID_PLAN.
But, when I goto the datasource using RSA2, I can see the field GUID_PLAN in grey.
Can anyone tell me how can I enable this field?
regards,
ZEESR

My problem is solved with the help of following link,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c008cd97-ef00-2d10-d1ad-867b9c3f063c?quicklink=index&overridelayout=true
I want to understand if there are any issues does anyone foresee with this setting. I hope there are no issues.
regards,
ZEE SR.

Similar Messages

Appended field in the datasource as selection in infopackage

Hi,
I have appended a field in my datasource, say for example, country (ZZCOUNTRY). I set ZZCOUNTRY as selection in the datasource so i can filter by country in my infopackage. When i check my datasource, ZZCOUNTRY is there. But when i use it in filter, the system is ignoring it.
Example, if i load all data, i get 5 records. 1 is US, and 4 for CA. when i filter by country US and load my infopackage, i am expecting to get only 1 record, but i still get 5 records.
do you know if it's possible to use appended field as infopackage filter?
Thanks
jti

Hi
if u want to enchance your datasouce u are suppose to maintain the DS in RSA6,and then enable the fields for selections.
i suppose if the fields are appended fields you can't enable those for selection.
please check if these fields are enables before u proceed.
hope this helps
--- Rashmi

How to enable all fields in DTP Semantic Group....

Hi
In BI, for one of my Master Bearing Infoobjects DTP-> Semantic Group is enabled for all fields. But for 2nd master bearing infoobject, only its primary keys are enabled & non-primary keys r disabled in its semantic group. Even both structure have same DTP settings and both have data.
Could u pls. let me know why is it so & how can i enable all fields in semantic group.
Thanks...

Hi Harpal,
What are your target and source objects?
Take a look to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Choose This graphic is explained in the accompanying text Semantic Groups to specify
how you want to build the data packages that are read from the source (DataSource or
InfoProvider). To do this, define key fields. Data records that have the same key
are combined in a single data package.
This setting is only relevant for DataStore objects with data fields that are
overwritten. This setting also defines the key fields for the error stack.
By defining the key for the error stack, you ensure that the data can
be updated in the target in the correct order once the incorrect data
records have been corrected.
Regards, Federico

Fields in the datasource 0VENDOR_ATTR

Hi Gurus,
I need to unhide some fields in the datasource 0VENDOR_ATTR and then replicate it into BW. It is already loading the data into BW. Now I need some more fields to pass data into BW. Here my issue is my datasource is in display mode. I need to make it CHANGE mode so that I can unhide the fields. Is it not possible to unhide the fields when it is already with data.? Please suggest me.
Thanks in advance.

Hey you can go ahead and unhide fields.Yes you have to do in change mode.
1) Save the datasource.Check if the fields which were unhide are getting populated in RSA3.
2) Replicate the datasource in BW/BI side.
3) Map the corresponding objects in transfer rules.
4) Activate the transfer rules.
5) Load data.
6) Activate master data.
0VENDOR being master data you should not have issues.
Hope this helps.

How to enable certain fields in billing document?

Hi gurus!
I need your help with this, we recently upgraded our system from version 4.6C to ERP 2005. We have some users in Sales who are in charge of the billing process, in version 4.6C they were able to change some fields of the billing header such as:
- Currency
- Payment terms
- Incoterms
In the new version these fields appear as "disabled" (users cannot change anymore what was copied from the Clients Master Data).
I know there's some configuration in which info is copied from the sales order to the billing document (Copy Control). I already checked that and I'm not able to find where I can change something to "enable" these fields so users can define whatever they need.
I also tried to see in SE80 if the fields that are part of that Dynpro have some other properties to enable them but was unable to change something.
I also checked transactions OVA2 and VUA2 but didn't find somenthing that could help me out with this. Finally I checked different user exits in the previous version but it seems that when this was originally configured that was not the solution.
There's also something else going on with the header because in the previous version users had the chance to type different texts in the Text Header tab but now everything is "disabled".
Is there a transaction or something that you know so I can enable those fields?
Thanks in advance.

Not sure what the requirement is as ideally, you are not suppose to change the partner function manually during shipment. However, go to VOPA, place your mouse on Transport and click on Partner Procedures. Double click on Procedure and see whether Forwarding Agent is set to Not changeable . If so, untick that and save. Now retry the process.
thanks
G. Lakshmipathi

Units field MEINS for field TOTQTY of DataSource ... is hidden

hI,
I am getting "Units field MEINS for field TOTQTY of DataSource ZDS_BEALO is hidden
    Message no. R8147 "
error message while creating the generic extration using fuction module...
Please help to slove this

I solved this problem myself by writing ABAP program.
REPORT ZTEST.
TABLES ROOSFIELD.
DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
SELECT * FROM ROOSFIELD INTO TABLE ITAB
                       WHERE OLTPSOURCE = 'DATASOURCE_NAME'
                             AND FIELD = 'WAERS'.
*update ROOSFIELD set SELECTION = 'X'.
*ENDSELECT.
Create a report program and update the value of field "SELECTION" as above.
Then try to make changes in RSO2 as it needed.
Let me know if you need my help..
Thanks,
Hanuma

Units field XYZ for field ABC of DataSource ZRST Message no. R8147

HI,
When I'm trying to SAVE my datasource ZRST, I've got following error.
Units field XYZ for field ABC of DataSource ZRST Message no. R8147
In extraction structure of this datasource thare are at least two fields that use the same unit field.
Accordign SAP note no 867795:
One of the fields is displayed and another is hidden.
Then the unit field is hidden and the above error occurs.
This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA 620.
Could it be the same case as described in this SAP note?
Anybody got same problem? Please advise.
Thanks
m./

Hi,
Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
hope this helps,
thanks,
vrrp.

One field in standard datasource 2LIS_02_ITM can not be found in LBWE

Dear expert:
I have one field NOPOS of datasource 2LIS_02_ITM (Purchasing Order Item) need to find the source table.
Here my question is: NOPOS is a standard field of datasource 2LIS_02_ITM, why can I not find this field in LBWE through maintenance? Any suggestion to find the source table?
Thanks all for your time in advance~
Tim

even if it is a counter field it should be present in DataSource structure as the infosource of this DataSource has mapping of this field.
Check the HELP.SAP.COM documentation for same
Regards,
Sharayu

New field in the datasource

Hi all;
Im trying to add a new field to the 0CO_OM_OPA_6 datasource.
The new field is the Cost Center (KOSTL).
I just add this field to the Append Structure.
If I check it, the following message appears: Field KOSTL does not lie within customer namespace.
After the activation of the append structure, from the ICORDCSTA1, and remove the hide field from the datasource, I tested in RSA3 but the Cost Center columm appears empty.
Is there any step missing?
Can anyone help me?
Regards;
Ricardo

Hi
Whenever you enhance the data source,it is best practice to give name as zz*
and once you add these fields..system doesnot know how to fill these fields with data..so you have to write code to populate data into your fields..
go to se38(r/3 side) and give include 'zxrsau01' and click on change...
write code to fill your fields activate it and now check in rsa3...
Code sample
when '0CO_OM_OPA_6'
do this thing
Hope it helps
Thanks
Teja

Timestamp field in standard datasources

Hi All,
Can anyone tell me how do we find out the timestamp(delta) field for standard datasources 2LIS_11_V_ITM and 2LIS_11_V_SCL

Hi
Sales Document is the Delta Field for both the DS -- you can always find time stamp at RSA7-- based on the settings you have opted at V3 collective run.
The delta update is supported using the delta method ABR. Note that when a change is made to the sales document, a delta update occurs only if one or more fields in the extraction structure are affected by the change. You can find further information in SAP Note 576886.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/94/5780aeec7d43d9be78b05fd4b3212e/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/41/938d9c476c4ed6a9eed87b59ae19ac/frameset.htm

Enable a field in VF01 transaction

Hi All,
I need to enable a field 'Exchange rate-accntg'VBRK-KURRF' of the transaction VF01,
Please guide me how to do this using SHD0 transaction or if any other way is possible.
Regards,
Sowjanya

In SHD0 Enter the Transaction code & Enter the variant for particular transaction & click on change with processing Here you can select the field what ever you want to display ..
Other way---->
Go to SPRO --> Find for Exchange rate in accounting area --> here go for general settings & double click on the screen fields --> click on radio button what ever the field you want to see (VBRK-KURRF)
in transaction VF0

Logic behind ZMNG field of 2LIS__04_P_COMP datasource

Hello Experts,
Cab anyone please tell me How ZMNG field of 2LIS__04_P_COMP datasource populates...?
what is logic behind ZMNG?

Hi,
ZMNG or target consumption quantity is basically requirements quantity
on the basis of the quantity produced.
Target consumption quantity
Definition
Requirements quantity on the basis of the quantity produced.
If the component quantity is constant for each order, the target
consumption quantity corresponds to the requirements quantity, otherwise
the target consumption quantity is calculated using the following
formula:
Quantity of goods received * required quantity per order unit of measure
order item quantity * ( order item quantity - quantity of scrap from
an order item )
make sure you have note 1497825 installed.
Colin

How to enable pernr field in miro

Hello,
while creating invoice in miro, pernr(emp no.) field is in display mode but i want the field in changeble mode.
for the above requirement I have enabled pernr field in miro by going to transaction olmrlist   and then entering the below
Transaction          MIRO
Screen variant       7_6310
Program              SAPLMR1M
Screen               6310
and by checking the attributes of field Personnel no .
while doing so the quantity field which was intially enabled got disabled .
I want the quantity field to be enabled.
I am working in sap ecc600.
Kindly help me .
Regards,
Rachel
Edited by: Rachel on May 7, 2008 11:24 AM

I got the answer for my Q.
Purchase order is a service PO and in case of service PO, you can
enter the quantity during MIRO only if GR-based IV and SRV-based IV
indicators ( at invoice tab of PO) are ticked. Since PO present in system these indicators not ticked so quantity field is set as displayed.
Regards,
Rachel

Enable item field

Our sap was disabled the net price by IMG. Now, the new requirement is to enable to net price allow to input when the user choose the account assignment category as 'K'. So, i would like to know which user exit trigger the event and how to enable the field of net price, thank your very much.
Moderator message: please work yourself first on your requirement.
Edited by: Thomas Zloch on May 9, 2011 2:15 PM

Yes ...Ram I am looking in for a new Item field with Mandatory using OA Framework.... Could you please suggest how get the information regarding ...
Thank You for your support...
Regards
Kumar

Enable a field created by EEWB

Hi Experts,
Can you please help me on how to enable/disable a field created by EEWB transaction. We have done an enhancement to the BP master date through EEWB, and we need enable some of these fields. Kindly help on this.
Regards,
Basheer

Hi,
My understanding is, you have created a field by EEWB and trying to enable that field in UI. If I am not wrong, you can add the created field from available fields to displayed fields with the help of the Tcode: BSP_WD_CMPWB.
Steps to be followed:
1. Tcode: BSP_WD_CMPWB
2. Enter the Component ID
3. Go to Views and select the relevant view in which you have created the field by EEWB
4. Click on Configuration tab
4. Click on Copy the configuration ( do not make any changes in standard one)
5. Click on Edit
6. Click on show available fields
7. Move the created field from Available fields to Displayed fields and Save.
Hope it helps you.
Regards,
Maddy

Enabling a field in a Datasource

Similar Messages

Maybe you are looking for