Enabling browsing web services

I am not able to locate the oracle.bi.enterprise map in the domain bifoundation_domain in OBIEE 11g. How do i do the following:
+"To enable browsing for Web services, you must go to Oracle Enterprise Manager,+
+access the oracle.bi.enterprise map, which is located on the bifoundation_domain, and+
+manually add the "wsil.browsing" credential to the credential store. This key holds the+
+user ID and password for the valid user defined in the identity store."+
If this is not the correct forum for this question do let me know.

if you dont have it then you just need to create one with the name oracle.bi.enterprise map by clicking on create map and then follow the instructions as adding the wlis.browsing with the valid credentials

Similar Messages

Cannot enable HP Web Services: "Connection error. Check Internet connection."

Hello,
I have a problem with LaserJet setup using Wi-Fi network from windows 7 and 8. The problem as far as I understand is due to inaccessible HP Web Services.
Details:
1, The printer works good by USB.
2. The printer is correctly configured to use Wi-Fi router with right password.
3. It can be successfully ping'ed from Windows
4. In Web browser I can enter on printer's IP
(Serial Numbers are hidden as you recommend, firmware updated)
4. But when I try to Enable HP Web Services, an error message appears:
which is strange, because the printer is connected to the same router as the computers and other devices with automatic configuration (and internet is available without any proxy when I am typing this message):
Please help to resolve this issue.
Thanks,
Fedor

Thanks for clarifying Fedor,
HP Web Services are not related to the pritner installation over the local network, those are two different features.
However that may indicate a nework issue.
First try running the HP Print & Scan Doctor below on one of your PCs:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/p...
Does the tool can see your printer throught eh local network?
By clicking the top Network menu and Troubleshoot Firewall, what Firewall software is detected on your system?
Try disabling it and check if that may help.
From teh top Network menu select Show Advanced Information.
What is the IP address of your PC?
I also suggest rebooting the router by unplugging its power for a moment, then reboot the printer and try installing it again.
If the issue persists, what is your router model?
May you see any difference by connecting the printer to your router with an Ethernet cable?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

M251n can't enable hp web services

I just got an M251n printer and I have been trying to set up the wireless for hours going through all the support suggestions and none have worked. When trying to enable the Web Services Setup I get a message of "Connection error. Check internet connection." The connection is fine and working and the printer is connected online via ethernet and my computer is connected to the printer by USB.
I am using a Mac and have downloaded the latest driver for the printer. One support suggestion stated that I might have outdated firmware but I can't find any firmware updates for this printer.
I am not sure what is wrong. It's not straight forward and without the wireless function working I will have to take this printer back and buy a different brand.
Any suggestions are welcomed.
This question was solved.
View Solution.

Hello neilthedirector,
Welcome to the HP Support Forums!
I see that the HP LaserJet Pro 200 color Printer M251n will not allow you to enable the Web Services. I was able to locate a firmware update utility that you can check the printer with, if you are using Mac OS X 10.5 - 10.8.
HP LaserJet Pro Series Firmware Update Utility<---
If the update is not present, or fails to resolve the issue, try applying a manual I.P address and DNS. To do this;
Enter the printer's I.P into the address bar in Safari.
Click Networking, then IPv4 Configuration.
Set the IP Preferred Address Method to Manual.
Increase the last set of numbers by 50.
Subnet Mask should be 255.255.255.0.
Default Gateway will be your router's I.P address.
Click Network Identification on the left.
Under DNS Primary (IPv4) enter 209.244.0.3 and for Secondary (IPv4) enter 209.244.0.4.
Click Apply and then power the printer off and then on.
Try now to enable the Web Services.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

B110a Trying to enable the Web Services Error message received

I am trying enabled the Web Services but I get the Error Message 'There was a problem connecting to the Server"
I get the same when I try to update the firmware but the printer is connect to a wireless network with internet connection and no firewall.

Hi Confused_Techie, Hope you are doing well and having a great day;
I will first try using the Network diagnostic utility.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&jumpid=ex_r4155/hho/ipg/ccdoc/n...
Hope this can identify and solve the issue for you.
If not than please include the operating system you are using and the build of the Operating system i.e. Win 7 sp1 64 bits. As well as router you are using. Also please take the time to add as much information that you may consider relevant. This will give you a better chance of getting an answer from not just me but other member of the community as well.
Cheers;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Help! Getting "Connection error Check connection" when trying to enable HP Web Services on M1536DNF

Can anyone tell me what I need to do in order to enable HP Web Services on HP LaserJet Pro M1536DNF model? Everything works fine and shows it's connected to the network but I cannot enable HP Web Services. It says "Connection error Check connection" I've tried restarting everything; network, printer, computer. I've also updated firmware to latest version as well.

Hi snapry,
Welcome to the HP Support forums. I understand that you are getting an unable to connect message when trying to enable the web services for your Laserjet CP1025nw printer.
Please set a manual IP address and manual DNS servers for the printer. The instructions can be found in the document Printer Does Not Maintain Wireless Connection. There is a Windows section and a Mac section. In the Windows section you will find the instructions in the sub-section titled “Solution three: Assign the printer a static IP address”. For Mac the applicable sub-section is titled “Solution two: Assign the printer a static IP address”. When entering the information for the Manual Preferred DNS server please use 8.8.8.8 and for the Alternate Preferred DNS server please use 8.8.4.4. These are Google’s DNS servers.
After setting the manual IP address and manual DNS servers, you should have no problems enabling the web services.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Enabling OBIEE web Services for Metadata manager

Hi All,
We are trying to connect from Informatica metadata manager to OBIEE, and one of the pre requisite says we have to enable OBIEE web services. Please help on how I can enable the web services.
Thanks for your time and help.

You will have to include the servlet(SPML Handler) in your web.xml.

Unable to enable HP Web services for my HP Laserjet 200 color MPF M276nw

Kindly assist, I have tried updating firmware, but still my web services wont enable.
Rgs
G
This question was solved.
View Solution.

Hi GayleneC,
Thank you for the update and additional information. I truly appreciate it.
You indicated that you tried to update the firmware, I’m wondering since the printer isn’t connecting to web services that it might not have connected to check for firmware updates. I’ve included two links, one is for the Windows version of the HP LaserJet Pro Series Firmware Update Utility the other is for the Mac version of the HP LaserJet Pro Series Firmware Update Utility. Please choose the one for your operating system and let’s try and update the firmware without using the front panel of the printer.
After running the firmware update utility, please disable the IPv6 wireless through the embedded web server. Please follow the steps below:
To open the HP Embedded Web Server, type the product IP address into the address line of a Web browser. When it opens it should look like the screen shot below.
Please click on the ‘Network’ tab as highlighted in the screen shot above.
Please click on ‘Advanced’ in the left hand side menu as shown above. Please uncheck IPv6 and click on ‘Apply’.
Please click on the ‘HP Web Services’ tab.
Please click on the ‘Enable’ button. The Web Services information sheet should print.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Session enabled RFC Web Service Fails & WSDL has enablesession=false

Please help Thanks in Advance
A stateful Webservice with 2 RFCs, consumed by a .NET application fails and the cause seems to be because of statelessness.
The call to 1st RFC succeeds and the call to the 2nd RFC fails with the below error message:
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally,
nor declared in a RAISING clause.Dereferencing of the NULL reference"
Question:
1- Even though the "Session-Oriented Communication" is checked, the WSDL has EnableSession as false. Is there any special step to make it true?
2- Even though the SOA Manager says that the Session is enabled and SessionMode is Http Cookie, the HTTPFiddler doesn't show any cookie in the .NET side.
3- Are Web Service enabled HRXSS RFCs capable of performing Session Oriented Communication?
Eg. Can the RFCs HrxssPerInitPernr and HrxssPerReadP0002Us be called in a sequence?
service ws = new service();
            ws.Credentials = new System.Net.NetworkCredential("abcd", "abcd");
            System.Net.CookieContainer cookie1 = new System.Net.CookieContainer();
            ws.CookieContainer = cookie1;
            //BELOW CALL SUCCEEDS
           HrxssPerInitPernrResponse response = ws.HrxssPerInitPernr(new HrxssPerInitPernr()
{ Infty = "0002", Pernr = "52222068", Userdate="2009-01-01" });
            HrxssPerReadP0002Us read = new HrxssPerReadP0002Us() { Infty = "0002" };
          // BELOW CALL FAILS
            HrxssPerReadP0002UsResponse readResponse = ws. HrxssPerReadP0002Us (read);
            HcmtBspPaUsR0002 [] records = readResponse.Records;
EXCEPTION
System.Web.Services.Protocols.SoapException was unhandled
Message="CX_SY_REF_IS_INITIAL:Exception CX_SOAP_ROOT occurred (program: CL_SOAP_RUNTIME_ROOTCP,
include:CL_SOAP_RUNTIME_ROOT CM004, line: 110)
An exception with the type CX_SY_REF_IS_INITIAL occurred,
but was neither handled locally, nor declared in a RAISING clause.Dereferencing of the NULL reference"
Source="System.Web.Services"
Actor="" Lang="en" Node="" Role=""   StackTrace:
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke at HrxssPerReadP0002Us
Edited by: Tony TB on Jul 2, 2009 9:56 AM

to get this working you need to enable some services in transaction SICF
to know a complete list of all services to be enabled check oss note number 517484
particularly these nodes should be active
/default_host/sap/bc/soap/wsdl and
/default_host/sap/bc/soap/wsdl11
(to get the error thrown by the server instead of page cannot be found, in your browser go to tools->internet options->advanced and uncheck the check box "show friendly error messages" and run the wsdl button again)
Regards
Raja

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

Cant enable ePrint web services for Color LaserJet M551

Hi,
I've read all posts in this forum about the ePrint web services enabling issue and tried out all suggestions with no luck.
Here is the situation:
The printer works fine locally. I can print without problem.
The printer is wired.
All ports in my router are open for outbound connections, including UDP.
Using communication logs in my router I can see that the printer can resolve the DNS-names using either my ISP DNS-server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows "registration-pro-site1print.houston.hp.com" resolves to 15.240.60.111 and "registration-pro-site2print.houston.hp.com" resolves to 15.201.224.79.
This indicates that the printer can indeed resolve the addresses. The logs also reveils that the printer communicates with the servers (connection established and data transferred) over https (probably the web service) but still after some minutes the enabling process times out.
I've tried this enabling procedure for several days now so my believe is that the registration servers should have worked some time during that period.
I'm frustrated
....even more frustrated
what am I doing wrong?
Please help !!
trying to setup eprint for my brand new LaserJet Color M551dn and it fails with the
This question was solved.
View Solution.

For whom out there having the same problem as I had. As HP couldn't help me out I restored factory settings and reconfigured everything and voilá, suddenly the printer managed to enable web services and print out the print code.
Good luck to you facing the same problem !!
/MrQQ

Cannot enable ePrint/Web Services, HP LaserJet CP1525nw

I am trying to follow HP's instructions for enabling ePrint and Web Services for my LaserJet CP1525nw. I printed the Config Report, got the printer's IP address and entered it into a brower as instructed. It does pull up summary page, but there is no "HP Web Services" tab as indicated in all of the HP instructions I can find - only four tabs that read: Status, System, Print, Networking.
I have looked at all sub-menus under each of these tabs, and cannot find anything that even resembles a "Web Services" option.
Can somebody please help? Or is there another way to find the printer's email address so that I can register and use ePrint for my iPhone and iPad?
From what I have been able to find on HP Support, the Airprint software driver(s) are not yet availble for this LaserJet model - or are they?

There is firmware to enable AirPrint in the HP LaserJet CP1525nw.
Go to the support page for this printer:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw_lang=&product=40529...
and pick the type of desktop computer you are using. On the resulting page you will see a choice to download a firmware updated that you can run on your computer to update your printer.

Is it possible to enable the Web Services for eprint on the CP1025nw

I am using the HP Laserjet CP1025nw
It is connected to a wired network with a fixed IP address.
I am using Windows 7 64bit
When I click enable to complete the Web Services setup - it fails telling me to check the internet connection.
The internet is working fine and all other aspects of the printer are working so how do I complete this setup??
Any suggestions please?
Thanks John
This question was solved.
View Solution.

Hi John,
I suggest starting over and following the instructions.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Re: Enable/Disable Web Services on your printer

I cannot enable my printer to print..... prompt promt

Hi Kimikofumi,
Welcome to the HP Support forums. I see that you are unable to print using your HP printer.
To better assist you, would you please supply some additional information:
What make/model/product number of HP printer do you have? How Do I Find My Model Number or Product Number?
How is the printer connected (USB cable, ethernet, or wireless)?
What operating system are you using on your computer?
Based on the thread title, are you also trying to enable web services?
Are you getting any error messages? If yes, what does the message say and where is it displayed (printer or computer)?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Enabling browsing web services

Similar Messages

Maybe you are looking for