Enabling Digial I/O Module on Audigy

I am sorta suprised that there is not more documentation on enabling Digital I/O on the Audigy 2 besides where to plug it in on the card? I recently purchased a set of surround sound head phones that have coaxial and optical inputs so I purchased the Digital I/O module. I cannot find where to enable or to "power" the digital I/O anywhere in the software. I read something about doing "spdif" pass through but I cannot find anything like this? Do I need updated drivers? Please advise.
thanks?-S

Yes it is the Audigy 2 Value, I purchased the I/O Module to work with a new pair of surround?sound head phones called the Tritton Ax360s. Please see the link below.http://www.trittontechnologies.com/p.../TRIGA600.html?Will I be able to get Digital sound from the head phones with this module on this card?Thank you!?

Similar Messages

  • The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

    The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
    The wrong lens F3.5/6.3  profile is checkmarked and I can not find the new  RX10  Sony 70-200 F2.8 G SMM11 profile.  The meta data in the Library module correctly list the Sony RX10 and the Correct lens. 
    How may I select the correct lens profile for my Sony DSC-RX10?

    Ask in the PS/ LR/ ACR forums
    Mylenium

  • How to enable the bundled remote from the Audigy 4 under Vi

    Hy folks, how can I enable the bundled remote from the Audigy 4 under Vista ? I can't find the software on my CD.
    Greetz Handon

    Hello Rupa,
    I did't get your exact quetion. now your upgrading from version 11.5.9 to 11.5.10. after upgrading only you can set the profile options. As i know we cant change the profile options before upgrading.
    cheers
    Krish....

  • Enable Async I/O module error

    I have a clean CS6 install on a new MacBook Retina display running the latest version of Mountain Lion with all updates.
    All was fine, now suddenly I am getting the following error when openiong a Photoshop file:
    Could not load the Enable Asyn I/O module because the file was not found.
    There are no third party plugins or any other added plugins, only the original install.
    Nothing has been changed on the system.
    Any idea why this is happening?

    You mistakenly copied plugins from a previous version of Photoshop.
    You should only copy third party plugins (and optimally, those should be reinstalled instead of copied).
    Get rid of the obsolete plugins you loaded by mistake.

  • Creative Digital I/O Module with Audigy 2 ZS Problems

    5Creative Digital I/O Module with Audigy 2 ZS Problems? Hello - new to the forums, but a long time Soundblaster user.
    I have read pkc's Digital Connections FAQ, but i am still struggling with my digital setup:
    I have had an Audigy 2 ZS for some time. I have recently bought a surround sound amp and want to connect my PC to the amp digitally using the Audigy 2 ZS. So i have bought the Creative Digital I/O Module which understand is perfect for connecting the two, but i cannot get any output from it.
    Firstly, the Creative Digital I/O Module is part no. SB0002 and has a 4 pole mini jack. I have connected it to the digital output of the Audigy. I have then connected the i/o module to the amp using digital coax cable. The amp receives no signal from the module and also i cannot see any light from the module's optical output. What do i need to do to get the i.o module working with the Audigy and sound to the amp?
    Secondly, i have read in pjc's post that the digital output can act as a digital coax, but how do connect a 4-pole mini jack output to a single phono jack for the digital coax?
    Thanks in advance for any advice here.

    [email protected]

  • Problems since I downloaded Adobe Creative Suite Standard 6Could not load the Enable Async I/O modul

    Could not load the Enable Async I/O module because it does not work with this version of Photoshop.
    Could not load the MMXCore Routines module because it does not work with this version of Photoshop.
    Could not load Fast Core Routines
    When I save as from Photoshop, I cannot save as a tiff – the file extension is jpf
    When I save as from Photoshop, I cannot save jpg – the file extension is cin.
    These are the messages I get and I just cannot seem to save to tiff or jpg despite changing them in the format they still save as stated and then I cannot reopen them

    You mistakenly copied plugins from a previous version of Photoshop.
    You should only copy third party plugins (and optimally, those should be reinstalled instead of copied).
    Get rid of the obsolete plugins you loaded by mistake.

  • Enabling tracing on the module level

    Hi all,
    Why DBMS_MONITOR.SERV_MOD_ACT_STAT_ENABLE doesn't enable tracing for the specified module in my case?
    Trace files generated only after setting sql_trace=true.
    Oracle 11g R1 Single Node with ASM
    Windows 2003 Server
    In session1:
    SQL> conn sa/*
    Connected.
    SQL> exec DBMS_APPLICATION_INFO.SET_MODULE(MODULE_NAME=>'FINANCIAL',ACTION_NAME=>'PAYROLL');
    PL/SQL procedure successfully completed.In session2:
    SQL> show user
    USER is "SYS"
    SQL> select service_name from v$session where username='SA';
    SERVICE_NAME
    ora11g
    SQL> EXEC DBMS_MONITOR.SERV_MOD_ACT_STAT_enable( service_name=>'ora11g',MODULE_NAME=>'FINANCIAL');
    PL/SQL procedure successfully completed.In session1, no trace files generated as a result of the following:
    SQL> EXEC LOAD_GENERATOR.RANDOMDML(100);
    PL/SQL procedure successfully completed.In session 1, only after setting SQL_TRACE, the trace files generated:
    SQL> alter session set sql_trace=true ;
    Session altered.
    SQL> EXEC LOAD_GENERATOR.RANDOMDML(100);
    PL/SQL procedure successfully completed.

    Hi Forstmann,
    You were right that I should have used DBMS_MONITOR.SERV_MOD_ACT_TRACE_ENABLE and not DBMS_MONITOR.SERV_MOD_ACT_STAT_ENABLE.
    But of course your following statement was NOT right: "All DBMS_MONITOR procedures do not enable SQL tracing"
    Thanks a lot anyway.

  • Generic Delta enabled datasource with Functional Module

    Hi All,
    We have a requirement to create a Generic Data Source which will be having fields from the tables COEP, COBK & BKPF. Generic datasource should be delta enabled. We are planning to achive it by writing a Functional Module.
    No my question is can i use BWFI_AEDAT & BWOM2_TIMEST tables to make Generic Datasource delta enabled. If i can then please let me know how. If i can't then please let me know what should i do to make it delta enabled.
    Thanks & Kind REgards,
    Harman

    Hi,
    before looking in specifics on your question please have a look at
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f1a423-02ae-2e10-bd85-bde64e61fe7b?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70806d62-1c59-2e10-7597-91c114600d32?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c062a3a8-f44c-2c10-ccb8-9b88fbdcb008?QuickLink=index&overridelayout=true
    And finally:
    http://help.sap.com/saphelp_nw70/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
    Last link is talking about deltas from COEP table and one of the fields you are mentioning (which might mean something else than you expected)
    Hope this helped
    C.

  • Reg:dynamically enabling push button in module programs

    hi guru's.
           i have placed a pushbutton on a screen,and i have hide it.
    on certain conditions i want to enable the pushbutton dynamically through coding,how to do that....
    plzzz help......
    with regards,
    balaji.s

    Dolike  below
    loop at screen.
       if screen-group1 = 'G2'.
            screen-active = 1.
            screen-input = 1.
            screen-output = 1.
            screen-invisible = 0.
            modify screen.
          endif.
    endloop.
    here you need to assign your  field to  a group  say 'G2'.
    do rward if helpful

  • How to enable SPA-5X1GE-V2 modules on ASR 1006

    hi
    I am facing some issue to activate
    SPA-5X1GE-V2 modules on ASR 1006

    Could you tell us the 'show inventory', 'show platform' & 'show facility-alarm status' output please.
    To my recollection once you plug it in you should be able to see it.
    SQP-ASR1002-01#show inventory
    NAME: "Chassis", DESCR: "Cisco ASR1006 Chassis"
    PID: ASR1006           , VID: V05, SN: xxxxxxxxxx
    NAME: "module 0", DESCR: "Cisco ASR1006 SPA Interface Processor 10"
    PID: ASR1002-SIP10     , VID:    , SN:           
    Are there any log messages that you see when plugging this module in?
    Have you tried
    Router(config)# hw-module subslot slot-number start
    http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/install_upgrade/ASR1000/ASRmin.html

  • Could not load the Enable Async I/O module error message

    anyone get this error message trying to load actions in the CC version of photoshop?

    You mistakenly copied plugins from a previous version of Photoshop.
    You should only copy third party plugins (and optimally, those should be reinstalled instead of copied).
    Get rid of the obsolete plugins you loaded by mistake.

  • What's needed to qRFC enable (and call) a function module?

    Hi people,
    I have a function module that I want to call using qRFC. However, I'm not sure how to go about this. What i can find in documentation is the following:
    - function module needs to be RFC enabled (of course)
    - function module needs to be called in update task
    However, I have the feeling there should be more to it than just this. Can anyone point me in the right direction?
    Thanks,
    R

    I guess you will have to make use of the following function modules to define the queue name:
    TRFC_SET_QUEUE_NAME
    TRFC_SET_QUEUE_RECEIVER_LIST (inbound queue)
    TRFC_SET_QUEUE_NAME_LIST (outbound queue)
    Also, the call would be like
    call function u2019Z_QRFC_FUNCTIONu2019
    destination 'DESTINIATION'
    in background task  ( as separate unit )
    exporting ...
    tables ...
    etc...
    Also, you can check this link
    http://help.sap.com/saphelp_nw04s/helpdata/en/62/73241e03337442b1bc1932c2ff8196/content.htm
    Hope this helps.

  • RFC Enabling a Function Module

    Hi Friends
    I need to remote enable a Function Module( for RFCs ) which was already developed some years ago.
    I need to know what all things I need to take care of when remote enabling such a Function Module.
    Thanks
    ~S

    this is what u need to do...
    1) change attributes of FM to Remote-Enabled
    2) create  RFC destination in SM59, u can specify the logon information here to access the remote system
    3) call the function by specifying the DESTINATION addition in the CALL FUNCTION statement...
    that is...
    CALL FUNCTION <func_name>
        DESTINATION <RFC destination name>
    but make sure of the following...
    1) if u r going to use asynchronous RFC, there should not be a return parameter in the FM,
    2) table header lines cannot be passed in RFC FMs
    3) no parameters can be passed by reference
    read the documentation on RFC for details...
    http://help.sap.com/saphelp_erp2004/helpdata/en/22/042abd488911d189490000e829fbbd/frameset.htm
    rgds,
    PJ

  • Cannot figure out how to enable optical in on an Audigy Platinum w/ Live Dri

    I cant fingure out how to enable the optical in on my audigy
    looked all over, asked a bunch of people. no one knew. manual mentions nothing either. maybe im just stupid and missing something simple....but i dont know.
    thanks for you time.

    Smish,
    There really shouldn't be any enabling required, however you may want to make sure you have the latest drivers installed on you system as they may assist you in getting this working optimally. What are you connecting to the optical in and what kind of signal is it sending?
    Jeremy

  • Remote Enabled Module option for FI_ITEMS_DISPLAY

    Hi,
    We need to Enable the Remote Enable option for function module
    FI_ITEMS_DISPLAY to access the third party system.
    Please suggest wheather we can enable the remote enable option but in
    this function module refernce parameters are used.
    please suggest.

    Hi,
    purpose of this FM is to display ALV with some data which are passed to this function module and therefore it is meaningless to make this FM remote enabled. It is not clear what exactly is your issue. Can You explain it in more detail?
    If you want to get items data from third party system and than to display them in SAP, you do not need to change this FM to remote enabled. You just need to get data from external system before calling this FM for displaying data and pass these data to FM FI_ITEMS_DISPLAY.
    If you want do display ALV in third party system, it is not possible.
    In general, it is possible to make a customer function module which will be remote enabled and will be used as a "wrapper" and call this FM instead of the original one.
    Regards,
    Adrian

Maybe you are looking for