Enabling/Disabling/Deleting AD users - Xellerate

Hi,
I have trusted resource reconciliation from AD to Xellerate. So, I am able to create/modify a user in AD and this will create/update the user in Xellerate.
But, how can I implement disable, enable and delete user logic such that when a user is disabled/enabled/delete from AD then this will be reflected in Xellerate?
Any help is greatly appreciated. Thanks in advance!

Hi,
Disable Users: Nobody can log in to the mailbox, but the data is safe and it can receive email. Once it is enabled, it is back to normal.
Delete Users: when the user is deleted all the services are removed and all data is erased. The user is deleted from our Active Directory. If you create a user with the same Name and Emial address again, no data or services are recovered.
If you disable a user, the Active Directory object remains untouched together with the mailbox data and properties, but you will not be able to access any mailbox data.
If you delete a user, the Active Directory object is removed together with all data and properties of the user.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

Disable Delete Button in Administrator Tab of OIM 11g

Hi All,
When we open a user in Administration tab, there are buttons like Lock/Unloc Account , Enable/Disable ,Delete button.
I want to disable the delete button for all Users. No user should be able to delete the user in OIM.
Please suggest an appropriate way....if any one has already tried....
Thanks!!
Awaiting Respose,
Regards,
T

once login OIM with normal user it want allow you to disable/delete operation.
Else for better usage use authorization policy. create a group/role and provide certain privilege to that group using authorization policy.
--nayan

Disable Delete Button

Hi All,
In the menu Shopping cart Status, I could able to see all the shopping cart.
Now the requierment is , DELETE button should be disable if there is any corresponding PO for that SC.
Please let me know how to do this. I tried with BADI BBP_UI_CONTROL_BADI. But this will hide alll the SC's irrespective of PO's.
Please let me know any other way to do this?
I am working on SRM 5
Regards,
Nikhil V.Kumar
Edited by: Nikhil V Kumar on Aug 30, 2010 1:58 PM

Hi
It will be too complex(if at all possible) to implement a solution for enabling/disabling delete button depending on the follow on document of the cart.
I will recommend you to put some code in Check BADI which could check the follow on documents for a Shopping cart on Action DELETE and throw an error if someone tries to delete such shopping carts.
Regards
Virender Singh

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

Active Directory User which can Create a User but not Allowed to Enable Disabled Users

Hi Guys, we have a requirement to create a User Group in Active Directory which will grant its members permission to 'Create Users' but not be allowed to 'Enable' 'Disabled Users'.
We have tried delegating control and assigning permissions by going to 'Security Tab>Advanced'.
It seems like when a group is granted permission to create users, it will also be allowed to enable, disabled users.
Kindly advise if it is possible to create a user group with permissions to 'Create Users' but not be allowed to 'Enable', 'Disabled Users'.

Hi,
According to my experience, you can assign permission with create/delete user objects. If you want to disable/enbale
a user, you must be a member of the Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory, or you must have been delegated the appropriate authority.
In general, if you just give a user group the permission to create user objects, it cannot disable or enable user accounts. Please make sure that the permission you assigned is correct and the
user group are not the member of Account Operators group, Domain Admins group, or the Enterprise Admins group in Active Directory.
Best regards,
Susie

Deleting AD users vs Disabling. What is the difference? If an account is disabled, can it still be setup for mail forwarding to another user? If an account is deleted, what files get deleted?

Deleting AD users vs Disabling. What is the difference? If an account is disabled, can it still be setup for mail forwarding to another user? If an account is deleted, what files get deleted? Thanks.

Hi,
Disable Users: Nobody can log in to the mailbox, but the data is safe and it can receive email. Once it is enabled, it is back to normal.
Delete Users: when the user is deleted all the services are removed and all data is erased. The user is deleted from our Active Directory. If you create a user with the same Name and Emial address again, no data or services are recovered.
If you disable a user, the Active Directory object remains untouched together with the mailbox data and properties, but you will not be able to access any mailbox data.
If you delete a user, the Active Directory object is removed together with all data and properties of the user.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

We have a long list of disabled/deleted users in AD Somehow, they are still appeared as active user in Sharepoint Online. How do we get rid of those list? Hope you can advice. Thanks.

we have a long list of disabled/deleted users in AD
Somehow, they are still appeared as active user in Sharepoint Online.
How do we get rid of those list?
Hope you can advice. Thanks.

SharePoint does not remove users from SharePoint permissions just because they were deleted/disabled in AD. This is to maintain referential integrity. In fact, when you delete a user from SharePoint, that user remains in the SharePoint content database,
just marked as deleted.
They do not have access to SharePoint given their account is deleted/disabled. But as far as automatically managing this, I'm not aware of a tool. On-prem there is Metalogix ControlPoint which does a great job of this, I haven't explored the O365 options.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Programatically enable-disable check box"play user interface sound effects"

Hello All,
I have been Working on something where i need to disable the "play user interface sound effects" check box ( Under System preferences under sound panel ) for few seconds and then enable the same programically without any user interface appearing on the screen. I know something related using the Applescript however there is a user interface appearing there which doesn't serve the purpose please help with some solution.If you could provide the exact location of the plist file which holds this information then that could help as well.

Hi !
I too have been working with the sounds ( Which i think is relates to @mit's query ) in an application and the problem is that when ever that application moves something to trash there is a sound which comes the sound of "throwing things in the trash". This is very annoying and i want to do something so that I can suppress that sound atleast for the time this application is on. Now is there some way where I can do this Programically . It would even be fine if I could turn off the user interface sounds completely for sometime and then bring them back on.
Thanks In Advance !
Looking Forward To Some response soon !
iMAC G4 Mac OS X (10.4) Power PC 256 MB RAM

How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?

How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.

Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
     DATA ls_context TYPE wd_this->element_context.
     DATA lv_visible TYPE wd_this->element_context-visible.
*   get element via lead selection
     lo_el_context = wd_context->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_context IS INITIAL.
     ENDIF.
*   @TODO fill attribute
*   lv_visible = 1.
*   set single attribute
     lo_el_context->set_attribute(
       name = `READONLY`
       value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
     DATA lo_el_input TYPE REF TO if_wd_context_element.
     DATA ls_input TYPE wd_this->element_input.
     DATA lv_vbeln TYPE wd_this->element_input-vbeln.
*   navigate from <CONTEXT> to <INPUT> via lead selection
     lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
*   @TODO handle non existant child
*   IF lo_nd_input IS INITIAL.
*   ENDIF.
*   get element via lead selection
     lo_el_input = lo_nd_input->get_element( ).
*   @TODO handle not set lead selection
     IF lo_el_input IS INITIAL.
     ENDIF.
*   get single attribute
     lo_el_input->get_attribute(
       EXPORTING
         name = `VBELN`
       IMPORTING
         value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
    DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
    lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
    IF lo_el_context IS INITIAL.
    ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
    lo_el_context->set_attribute(
      name = `READONLY`
      value = ' ' ).

Updating date while enabling/Disabling user in AD

Hi All,
We are using FIM 2010 R2 SP1 and integrated with AD.
All integration is done through synch rule and no coding.
Now we have a new requirement to update date in AD while enabling and disabling user.
Kindly suggest, how it can be achieved through synch rule.
Thanks,
Mann

Hi Mann.Cool,
You can't set a date dynamically thought sync rule. Instead, I suggest you parse useraccountcontrol and set an custom attribute with value enabled/disabled.
See
http://idmgnt.wordpress.com/xpath-custom-expression/ (Check if an account is enable or not)
Once is done:
Create two new sets "Enabled users" and "Disabled users"
Create a WF with T4F Function Evaluator, to set your date attribute (http://oxfordcomputergroup.com/technology/software-tools-components )
Create the mpr
Let me know if you want more details
Regards,
Sylvain

Getting users disabled/deleted with disabled resources in OIM

Hi,
Consider following use case related to OIM:
To get the Users deleted or disabled on a particular date with their 'AD User' resources which are in disabled state.
By means of built in reports i can get the users disabled or deleted for particular date.... how do i get the disabled AD User resource for each user....
i can go for scheduler task but how to proceed on that?

the exact requirement here is to get the users/deleted a day before along with their 'AD User' resources which are disabled
getObjectsByTypeStatus(long plUserKey, java.lang.String psObjectType, java.lang.String psStatus)
Gets a list of all the objects of the specified type that have been provisioned for a user and are in the specified status.
What i can make out here is that:
i need to write some logic that would give users disabled/deleted say yesterday... after this i would loop in these user keys into getObjectsByTypeStatus that would give resources disabled for each user.
Am i correct?
Now how do i get the users disabled/deleted yesterday. This is realised by default Users Disabled/Users deleted report.
But how do i use it in my scheduler
Edited by: Chhavi Saluja on Jun 30, 2010 1:20 AM

Enable Submit Button at User Level and Disable at Block Level

I developed a query_find form having empno field:
Once the Employees‘s data is returned, then the new form that opens up should have the following fields.
Employee Name
Employee Number
Salary
Address
Notes
and submit button.
i have taken Employee Name,Employee Number,Salary,Address,submit button in xx_emp block.
and i have given Query Data Source as xx_EMP_v view.
and Notes related to xx_dum_emp block and for this query data source as xx_emp_details table(here notes field is contorl item)
And i have written the following code in the submit button
IF :xx_dum_emp.NOTES IS NOT NULL
THEN
INSERT INTO xx_emp_details
(employee_number,
employee_id,
employee_name,
address,
salary,
notes
VALUES (:xx_emp.employee_number,
:xx_emp.employee_id,
:xx_emp.employee_name,
:xx_emp.address,
:xx_emp.salary,
xx_dum_emp.notes
END IF;
commit;
I have taken all the fields in the same canvas.
Requirement:
Submit Button should be enable for the specific user.For other users it should be in disable mode.
so i have written code in POST_QUERY of the calling block as below:
IF l_name = 'TESTUSER'
THEN
SET_ITEM_PROPERTY ('XXMZ_EMP.SUBMIT',
enabled,
property_true
ELSE
SET_ITEM_PROPERTY ('XXMZ_EMP.SUBMIT',
enabled,
property_false
END IF;
It's working fine.
Suppose i query with empno 10 it will return Employees‘s data.So in that form i just enter some text in the Notes field
then click on submit.then close the form.again query with the same number then i need to disble Submit button at this level.
Is it possible to Disable the Submit Button?

Hi Dhana;
If your issue about Forms Customization please follow below and see its helpful:
Subject: Customization in Oracle Applications Doc ID: 743490.1
Subject: Forms Customization Doc ID: 69995.1
Subject: Setup & Usage (Customization) Doc ID: 104697.1
Please see "Oracle Developer Guide" available at:
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html
Also see:
http://oracle.anilpassi.com/forms-customization-steps-in-oracle-applications.html
http://oracle.anilpassi.com/a-new-custom-form-in-oracle-apps.html
I hope those are can be helpful for you
Regards
Helios

Remove Enable, Disable and Delete columns from searchUser.do

Hello,
What jsp form do I need to modify to remove the enable, disable and delete columns from the searchUser.do page? I edited tjspSearchUserResultsTiles.jsp but that didn't seem to do it.
Thanks

Hi,
TableGenerator.jsp is the general jsp so you shouldn't modify it.You need to extend tcSearchUserAction.java class aand create a custom class.You need to over ride populateColumnHeadings and populateTableData.
I won't suggest this approach until you are very much familiar with struts development and oim classes.
Regards
Nitesh

Behaviour of "Disable/Delete User After End Date" Task

Hi Expert,
We ran the given OOTB task "Disable/Delete User After End Date" and the behavior is always delete. How,if possible, to change the behavior to disable?
Thanks in advance.
SK

In order to change the behavior, you have to set the system manager preference called "Period to Delay User Delete" to something bigger than the task will make the user disabled and will automatically delete them at a future date.

Control Enable/Disable of Save/Delete/Modify buttons

Hi Friends,
Have some one written a program how to enable disable the buttons on a for. Like i have 4 buttons
1) Add New
2) Save
3) Modify
4) Delete
Now i want to control the enable/disable of these butons. Like when a blank record. ADD NEW, MODIFY, DLETE button shuld remain disable and ONLY SAVE button remains Enable. Similarly when there a change in record. MODIFY BUTTON is enabled.
Similarly other functions. Have someone written the code for this control. I am trying but no desire results.
Pliz Help,
Imran

Hello Imran
You have to write a code like
If <condition> the
set_item_property(button,enable,property<true/false>);
ELSIF <condition2>
set_item_property(button,enable,property<true/false>);
ELSIF <condition3>
set_item_property(button,enable,property<true/false>);
ELSE
set_item_property(button,enable,property<true/false>);
END IF;
the condition can be checked :SYSTEM.form_status.
Regards
Mel

Enabling/Disabling/Deleting AD users - Xellerate

Similar Messages

Maybe you are looking for