Enabling / disabling / positioning Display options for EP 5.0 Header

Hello,
Does any one has an idea about changing (Hide/Show/change position) the display options(e.g:- Personalize: Page | Portal Log Off Add To Favorites, search bar....etc) in portal Header Area in case of EP 5.0.
Regards
Sunil Kulkarni
Note:- I would like to know, it for EP 5.0 SP 5.

Now,you have to press volume down or up to change sound settings.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Need a JavaScript to enable/view Multi-line option for Text fields.

Hello All,
I need a JavaScript to enable/view Multi-line option for all the Text fields in PDF Form.
Assume that I have a PDF form of Fields from F1 to F100 and it contains 25 Checkboxes, 25 Combo Box and 50 Text Fields. Now i need a javascript for which i need to enable Multiline for only Text Fields. So Is there any JS for which i can enable the Multiline option for only Text fields and not for ComboBox or Checkbox.

Hi timo,
Thanks for your help. iam trying to use the iteraor approch to do this. but i don't know how to fetch the data entered in the form that was built by the iterator. can you please tell me .
thanks

How do i enable/disable call waiting option in iphone5

How to enable/disable call waiting option in iphone5. setting --> phone does not show up call waiting / call forwarding options

I've gone through your message completely, if you do not have the Call Waiting option under Settings > iPhone it means your carrier does not let you access that feature on the phone. Contact them and see if they have dialing codes to turn it off and back on.

Enabling Early Delta Initialization option for LO DataSource 2LIS_06_INV

Hi Guyz,
I want to enable Earlt Delta Initialization option for LO DataSource 2LIS_06_INV, as of now its greyed out.
please tell me if its possible or not, and if yes then please let me know the steps in detail.
cheerz,
raps.

hi,
Not all Data sources support Early Delta Initialization. Early delta initialization is done to capture the deltas when the initialization is being done between BW and source system (init with data transfer). As init with data transfer takes large time and during this time any records created will also be not captured so we do early delta initialization, also the same can be achieved by executing the init without data transfer and then loading a full repair request. The init without data transfer creats a time stamp and delta is generated for newly posted records.
regards,
Arvind.

Enabling/disabling the 'display PDF in browser' via a script after Reader 9 is installed

So we have Reader 9 already installed on the machine, but we need a simple way that a user can click on a shortcut in the start menu to reconfigure how the PDF is opened - either from within the browser or outside of the brower.
In Reader 7, I was able to use this:
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} Remove=ReaderBrowserIntegration /norestart /qb-!
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} ADDLOCAL=ReaderBrowserIntegration /norestart /qb-!
which works well after the fact that Reader 7 is installed on the machine.
For Reader 9, things have changed, and have tried this:
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=YES
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=NO
The above don't work, nor if I run a repair instead of an install. I also tried to modify the HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals\bBrowserIntegration then following in up with the appropriate msiexec command and that didn't work
No, asking users to go to the options and enable/disable the setting isn't ideal unfortunately as it requires too many clicks
Anybody have any suggestions on this?

Try this forum:
http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

Enable 'Export to spreadsheet' option for solman

Hi Experts,
I am new to the solution manager, while searching the incident via webUI the 'Dowlnload to excel sheet' option in enable for me as i'm the administrator. I want to unable this option for some users as well but by default it is not enable for the other users. I have search on scn and follow this link Disabling "Export to Spreadsheet" button on WEBUI in this they have mentioned one parameter name Export_Disable. This parameter is in CRM. When i tried to create this parameter in solman it is saying this parameter itself is not there.
Can you please tell me parameter name under solmapro business role to enable the "Export to spreadsheet" option for the solution manger for the users. Early reply should be appreciated.
Thanks & Regards,
Prasad Deshpande

you can try this -
To authorize the export to spreadsheet, you can use authorization object S_GUI in SAP GUI. This authorization object is assigned to the authorization role SAP_CRM_UIU_FRAMEWORK, which is delivered in the SAP standard system.
You can disable the export to spreadsheet for individual users by removing the authorization object. You can also disable the authorization for the export to spreadsheet on business role level in Customizing.
To use this function, you must activate the business function UI Framework (UI_FRW_1).

Is there a key on the MacBook Pro to toggle display options for a projector

I have had some difficulty getting my InFocus projector to consistently work correctly with my MacBook Pro. Is there a key on the MacBook Pro that toggles the options for projector display? There was one on my last MacBook and my previous PowerBook.
Thanks -
Dudley Warner

No, there is no longer a key to control external display modes (it's F7 on my 1st gen MBP, but the option was removed along with the embedded numeric keypad in the Early 2008 models). There's not a substitute keyboard shortcut (with the exception of installing a macro player like Keyboard Maestro). Your main option is System Preferences > Displays (as stated, ticking the box to show Displays in the menu bar provides a helpful shortcut).

NO-DISPLAY option for Radio buttons

Hi All,
I want to hide the 2 radio buttons on the selection screen using the NO-DISPLAY option. when i worked with that its giving an error like 'no-display and radio button group can be specified together'.
my question was is it possible to use NO-DISPLAY option with radio buttons?
Thanks
Kumar.

See this sample code
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-h01.
*Radio button for Process PO invoice
PARAMETERS : rb_po RADIOBUTTON GROUP inv USER-COMMAND rad.
" PO Invoice
*Radio button for FI Invoice
PARAMETERS : rb_fi RADIOBUTTON GROUP inv.
" FI Invoice
*Radio button for Process PO & FI Invoice
PARAMETERS : rb_pofi RADIOBUTTON GROUP inv.
" PO & FI Invoice
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
 s_bukrs FOR rbkp-bukrs, "Company Code
 s_ekorg FOR ekko-ekorg NO INTERVALS MODIF ID md2,
 "Purchasing Org.
 s_ekgrp FOR ekko-ekgrp NO INTERVALS MODIF ID md2,
 "Purchasing Group
 s_werks FOR rseg-werks NO INTERVALS MODIF ID md2,
 "Plant
 s_lifnr FOR rbkp-lifnr NO INTERVALS,
 "Vendor
 s_matkl FOR ekpo-matkl NO INTERVALS
 MODIF ID md1,
 "Material Group
 s_belnr FOR rbkp-belnr NO INTERVALS,
 "Invoice Number
 s_ebeln FOR rseg-ebeln NO INTERVALS MODIF ID md2,
 "Purchasing Document No
 s_gjahr FOR rbkp-gjahr NO INTERVALS,
 "Fiscal year
 s_budat FOR rbkp-budat NO INTERVALS,
 "Posting date
 s_blart FOR bkpf-blart NO INTERVALS,
 " Document Type
 s_bldat FOR bkpf-bldat NO INTERVALS,
 " Invoice Date
 s_usnam FOR rbkp-usnam NO INTERVALS.
"User
*Report type
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for User Report
PARAMETERS : rb_user RADIOBUTTON GROUP za DEFAULT 'X' USER-COMMAND rad MODIF ID md2."User report
SELECTION-SCREEN COMMENT 3(20) text-003 FOR FIELD rb_user MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
*Radio button for Managing Report
PARAMETERS : rb_man RADIOBUTTON GROUP za
 MODIF ID md2.
"Management Report
SELECTION-SCREEN COMMENT 3(20) text-004 FOR FIELD rb_man
 MODIF ID md2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN OUTPUT.
* Checking Radiobuttons and modifing Material Group field .
PERFORM f13000_check_radio.
FORM f13000_check_radio.
* When the FI button is selected hide the fields under group md1 and MD2
LOOP AT SCREEN.
 IF screen-group1 = 'MD2'
 OR screen-group1 = 'MD1'.
 IF rb_fi = c_x
 OR rb_pofi = c_x.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
* If the user output radiobutton is checked then make the screen
* input of Material Group off
 LOOP AT SCREEN.
 IF screen-group1 = 'MD1'.
 IF rb_user = 'X'.
 screen-active = 0.
 ELSE.
 screen-active = 1.
 ENDIF.
 MODIFY SCREEN.
 ENDIF.
ENDLOOP.
IF rb_user = 'X'.
* When display for material group is off
* then refresh the select option for material
* group
 REFRESH s_matkl.
ENDIF.
ENDFORM. " f13000_check_radio
hope this helps.

Multi display options for MBP using USB - Diamond BVU195 vs Sewell Minideck

I have narrowed my search for a multidisplay option for my MBP down to 2 devices;
Diamond BVU195
http://www.diamondmm.com/BVU195.php
http://www.amazon.com/Diamond-BVU195-Display-Adapter-included/dp/B002GHBW4S
and
Sewell Mindeck
http://sewelldirect.com/Sewell-Minideck-USB-to-DVI-Display-Adapter.asp
Has anyone had a chance to check out both of these?
There is no easy comparison, any opinions? thanks!

The obvious drawback of USB video adapters like these is that they tie up USB ports you may need for other purposes. If you intend to connect one or more such adapters to a USB hub instead of directly to the computer, be sure to use a hub that has its own AC power supply, and check with the adapter's manufacturer to make sure it has been tested with hubs and found to work that way.
The less obvious disadvantage of USB video adapters is slowness. If you don't use your multiple displays for gaming or other high-speed, demanding video applications, you may not be disappointed. If you do, you probably will be.

Is there a way you can select a display option for Safari pages on the OS5?

The tabbed version of Safari for the ipad2 is nice but the old one is better. Is there a way we can select a display option that lets a user toggle between the two?

No, Safari on the iPad in iOS 5 uses tabbed browsing. You can try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

Display Option For Previous 15" Unibody??

To start, I am not asking for advice on glossy vs matte. However, I prefer matte and would like to purchase the new 15" unibody MBP. I can decide to wait it out and see if Apple announces a matte option for the 15" MBP within the next few months or bite the bullet and get the glossy display.
*I could not find this information but did the previous 15" MBP Unibody have an option for matte finish (model previous to the WWDC update)?*
My thinking is that if there was an option, there is a chance they will introduce a matte option with the new 15" MBP unibody. If they did not have an option, I do not see them introducing a matte finish anytime in the near future.
Thanks

The previous unibody 15" MacBook Pro, launched in October 2008, didn't have a matte option. It had a glossy glass screen.
The new 15" MacBook Pros, launched in June 2009, still don't have a matte screen option.

In 'Desktop' the display options for the chosen image have vanished.

I have an iMac with Snow Leopard.
Using the option 'Desktop' in 'Desktop and Screen Saver', on choosing an image, under the name ofm the image chosen, there is usually a list of options for how the image is displayed :-
Tile
Fuil screen
Fit to screen
These are no longer displayed. Where is the option for switching the list back on?
I have tried restarting.
Thanks in advance
David

Disconnect all devices from the computer then do the following:
Boot up from your Snow Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
Please post back the results.

How to disable remote wipe option for mobile devices

Hi,
I have integrated environment of SCCM 2012 R2 and Windows Intune. I am managing Windows phone, Android and IOS devices through this setup. I was trying find an option to disable remote wipe option in the SCCM Console. Only selective wipe should be available.
Can you please help me on how to configure this setting.
Regards
Leela

I got the below response from the micososft intune team.
"Issue Definition: Cx would like remote wipe disabled
in the Admin console.
Scope Agreement: Disable remote wipe feature from account.
You will not be able to block this feature using Microsoft Intune. System
Center Configuration Manager might be able to control this feature. You
might consider opening a case with their team.
The other thing to consider, is to limit the amount of Admin users you have.
Anyone that is given Admin rights in Microsoft Intune will have the ability to
use the wipe feature. "
I have raised a ticket with SCCM 2012 team, awaiting their response.
Regards
Leela

Enabling/Disabling of stop button for Tomcat in MyEclipse in Run mode.

Hi,
I am very perplexed by the behavior of the Server option in MyEclipse 4.1.1 over Eclipse 3.1.2 using Tomcat 5.5.17.
When I start the server in Debug mode, the behavior is just fine. i.e. the stop button/option gets enabled and the Start button/option gets disabled when I start the Tomcat server.
But in the Run mode, the Start option does not get disabled and the Stop option does not get enabled when I start the server, so I have to guess/rely on the console to see if an instance is already running.
If anyone is having the same issue/behavior, and did something to correct it, please respond or point me in the right direction.
I have already:
1) Downloaded a new instance of both Eclipse and MyEclipse
2) Created the whole workspace again after deleting the .metadata
3) Tomcat is a part of our configuration management software so everyone uses the same version.
Edited by: nimraj on Apr 3, 2008 7:17 AM

Hi Sumit,
just add one more attribute of type wdy_boolean, and bind this attribute to readonly property of button by coding.
then as per your cell value set the attribute value, below is the some sample code.
METHOD wddoinit .
DATA: lv_node TYPE REF TO if_wd_context_node,
        lt_mara TYPE ig_componentcontroller=>elements_mara,
        wa_mara TYPE ig_componentcontroller=>element_mara.
SELECT matnr
         ersda
         ernam
         mtart
         matkl
         meins FROM mara INTO CORRESPONDING FIELDS OF TABLE lt_mara
                                 WHERE meins = 'GM' OR meins = 'CCM'.
SORT lt_mara BY meins.
lv_node = wd_context->get_child_node( name = wd_this->wdctx_mara ).
LOOP AT lt_mara INTO wa_mara.
    IF wa_mara-meins = 'GM'.
      wa_mara-readonly = 'X'.
    ELSE.
      wa_mara-readonly = ' '.
    ENDIF.
    MODIFY lt_mara FROM wa_mara TRANSPORTING readonly.
    lv_node->bind_structure( SET_INITIAL_ELEMENTS = ABAP_FALSE
                              new_item = wa_mara ).
ENDLOOP.
lv_node->bind_table( new_items = lt_mara ).
ENDMETHOD.
Regards
Srinivas

Other display option for larger fonts?Is now1920 x 1200 on Imac 24

HI,
I have an IMac 24, the matte display, however I always had this resolution set to 1920 x 1200...
I wear glasses, always had probles with teh small type...
what is the next larger resolution, that I can set the display at,
without distorting the screen???
thanks

FYI, this is the discussion area for the much older iMac G4.
Since your iMac is an Intel-based iMac you should post your future questions in the Intel-based iMac discussion area.

Enabling / disabling / positioning Display options for EP 5.0 Header

Similar Messages

Maybe you are looking for