Enabling Drill Down Buttons on queries

Dear experts,
I have been writing queries on SAP query manager but for some reason the orange drill down button does not appear. At other times it appears on default, Is there a way to have this button appear especially on master data , documents or transactions as you would like ?

Hi Martin,
The orange arrow will be displayed on all document transaction and mastercodes having a unique Id generate by SAP. specially numbers link BP codes, Item codes.
You could try using "FOR BROWSE" at the end of your query.
To your Query please find the solution in the below link SAP Note.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1410595]
Regards,
Rakesh N

Similar Messages

How to enable drill down?

Hi,
I use BIEE 11.1.1.5.0. I can drill down by clicking column. But I made some changes to the repository recently. It doesn't support drill down now. Is it any additional config to enable drill down?
Thanks

Hi,
Did you delete any dimension hierarchy in the rpd.Could you elaborate on the change?
Rgds,
Dpka

How to properly enable drill-down capability

Dear Experts,
I am trying to enable drill-down to my existing stacked bar chart. Can someone briefly describe how I can successfully complete this task?
Thanks in advance,
Zack H.

add a series to the chart
go to properties for the chart
click Drill Down Option in the properties window
click Enable Drill down and follow the options
good luck
Amr

How to Enable Drill Down in WebI through Infoview

Hello Experts,
I have WebI report, I am running through Infoview and I see drill down option is disabled, can anybody help me how to enable drill down option.
Thank you
Ravi

HI Ravi,
Log on to CMC -> Application -> Right Click on Web Intelligence Rich Client -> Select your user -> Assign Security -> Advanced tab -> Select "Unassigned Rights" in Common Filter Settings -> Select Enable Drill Mode in Rights Name Column -> And assigned grant level to it.
Hope this help.
Regards,
Rishit

Hide Drill down button in CR 8.8 when Print out

Hi everyone!
I design template by Crystal report for SAP 8.8 and use drill down function for this template. It work fine, but when i print out on papar, i don't want to print this button.
How can i do this!
Thanks!

HIde that button by right click on buttompropertiessuppress--
create formula....
WhilePrinting Records
else
Thanks,
neetu

Hierarchy display not enabling drill down

Hi
We have a custom hierarchy on the cost center object which has 5 levels. The 5th level is the cost center.In some nodes the values are repeating for the first 4 level.
e.g.
level 1 : ABC
level 2 : ABC
level 3 : ABC
level 4 : ABC
In such a case the drill across functionality is working fine, but the drill down is not enabled with the hyper link for us to drill down the hierarchy
The hierarchy is properly displayed in the BW side.
what is disabling the hierarchy display
regards

Hi this is a known issue. pls log a CSS message for this and include the link to this discussion in the message.
you will be notified when the fix is available.

Drill Down Button in Reports 10g

We use to use an option to call a report from a report in Reports 6i called drill down reports by using a BUTTON for each record.
How can we achieve that in Reports 10g ?
Regards
Capri !!!
Message was edited by:
Capri
Message was edited by:
Capri

Hello,
You have to use hyperlinks :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_concepts2.htm#i1029586
2.2.5 About hyperlinks
Regards

Diplaying matrix with drill down (toggle visibility) enabled for 4 row groups

Hello,
I have a matrix in SSRS 2012 with 4 row groups representing a product hierarchy. Product Sub Group, Product, Sub Product and Account Number are the levels of the hierarchy. I have enabled drill down (toggle item visibility) on the first
3 of these levels.
This works great, but my matrix is very wide when it is first rendered. Ideally I want my matrix to expand horizontally as I expand/drill down into each grouping. So when the report is first rendered, and 3 of the groups are invisible, the
matrix will be thin. Is this possible?
Thanks,
Gabe

Hi Gabe,
Based on my test, it cannot achieved in SQL Server Reporting Services (SSRS).
We can hide these column contents in matrix, however, we cannot hide the space in the report. In this situation, I recommend you use table to display these data.
Alternative, we can add a drill-down in the column group to hide the column group when it is first rendered. Please refer to the following screenshot:
If you have any questions, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Drill down option with button

Hi,
        We have requirement for drill down option ,when i click on the button.
          I have entity dimension in the report as rows,when i click on drill down button, the entity should show children of the parent in the report using VBA or any work around.
Entity "abc" has b,e,f .. as children.
In current report
entity
time
abc
789
when i Click on "drill down"button, the entity dimension member "abc" should show the children of (b,e,f....), as shown below
entity
time
b
1
e
2
f
3
when I click on "back" button,
entity
time
abc
789
Please let me know , how to achieve this functionality in the report using VBA or any work around.
Thanks in advance

Hi Vadim,
               Thanks for the reply, we are actually using the EPMCONTEXTMEMER() for selecting the entity value , after selecting the entity if I do the drill down with the entity values in the report , the entity values are not in relation with the EPMCONTEXTMEMBER() , so how to deal with this situation,Please suggest here.

Xcelsius drill down problem.

Hi gurus, I'm developing drill down chart and table.
I want to reset, making cell blank, the drill down cell when i click combo box.
I used push button to refresh or reset drill down value but it can not refresh(reset) drill down cell
because the destination cell of the chart remains drill down value
I tried like below way
*Dashboard explanation
this dashboard consists of one chart, one table, one combo box and one push button.
Of course, chart has the drill down function
a : drill down value
Goal : make drill down cell turn to blank after i used drill down once.
1ST.
when i click the chart and use drii down, a is entered into drill down cell
2ND
by using "push button", i tried to reset drill down cell
but unfortunately it does not work.
Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
Drill down cell changes like this
1 -> 2 -> 3
a -> blank -> a
i have to eliminate (2->3) phase or find another way to refresh drill down cell.
I think problem is the chart which remains drill down value(a) although pushbutton reset the drill down cell to blank.
Is there any way to refresh or reset drill down value when i click combo box?
Should i develop custom-component? i'm waiting for your answer.
Thanks in advance.
Regards
Kwon

Amit,
Can you confirm if what you're saying also holds for components with the "Enable Drill Down" option enabled, and the "Default Selection" is set to "No Selection (-1)"?
I'm running into an issue where the "Default Selection" value is not cleared out after performing 3 levels of drill-down. On the third time I do a drill-down, by default the first element is selected, even though I've set the "Default Selection" to "No Selection (-1)".
Thanks.

Drill Down for Multiple Series in a Line Chart

Hello,
I seem to have a problem with the drill-down functionality in a line chart that has multiple series.
I have a line chart that displays the readings of a patient over a period of 1 month. For each day, there is the glucose level reading, blood pressure reading, etc... So, each reading is a different series in my line chart graph.
The basic requirement is: With a mouse over event on the chart, I am willing to display all the data that belongs to that day. The data will be displayed at the bottom of the screen in a small panel. It is very simple to do it when the line chart has only 1 series:
i) Enable drill down.
ii) Choose 'Row' as insertion type.
iii) Fill out the destination field.
iv) Make sure your labels (at the bottom of the screen) get the data from the destination cell.
When there is more than one series, it becomes very difficult. XCelsius will not let me use the same destination cells for different series. So, I will have to use other destination cells. In that case, I will not know on which day is the user on. Is there any way to achieve this functionality?
Let me know if you need further information.

This is certainly possible, but there's a bit of a trick to it (and really hard to explain without screenshots!). There's two halves to it:
1. Write the date that has been selected to a cell (for each series).
2. Write the name of the series that was clicked to some cell (this is the property 'Series Name Destination').
So let's say your three series are Glucose, Blood Pressure and Temp. Have those series names in B1,C1,D1 (with your dates down in column A). Insert a row below the series names (2:2), and then set up your insertion type for the chart as 'row'. The source data (for all three series) should be your list of dates in column a. The insertion cells for the three series will be, in order, B2,C2,D2. Now, depending on which point is clicked in the chart, the selected day will be inserted into one of those three cells. Completely useless unless you know which series was clicked.
So you need to insert the name of the series that was clicked ('Series Name Destination') into the spreadsheet, let's say in F1. The rest is just Excel formulas. The logic is, you can now tell what series was clicked, and go and look up the date that was inserted for that series, then go and look up the row that corresponds to that date. So to get the date that was just clicked, your formula (in F2) would be =HLOOKUP(F1,B1:D2,2,0).
Then a VLOOKUP will get the results from that row of data. For example, if I inserted another row at row 3 (to show my 'result' values) the formula in B3 would be =VLOOKUP($F$2,$A$4:$D$13,2,0).
I hope that makes sense.

PowerView option - Drill Down one level at a time also hide the columns other than the hierarchy columns

Hi All,
I have a simple PowerView report (Excel 2013) in which I have a hierarchy (three columns), an image column, and a Value column:
When I change the Show Levels option to "Rows - Enable Drill Down One Level at a Time", image column also hide.
I want to keep the image column displayed while drill down/up to the hierarchy.
Is it possible? If yes, then how?
Thanks & Regards,
Muhammad Ehsan
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Hi Muhammad,
According to your description, you have images at child level. Now you want to have the images displayed when have the child level items collapsed. Right?
In this scenario, when you show the data in a matrix in Power View, those images, Size ID and Prices have been added into a child group. If we enable drill down, all the items within the child group will be collapsed. We can't change it at all in Power
View.
For your requirement, we suggest you design your report using SQL Server Data Tools in Reporting Services. In Reporting Services, we can have specific columns toggled by the parent item.
Reference:
Add drill-down to a Power View chart or matrix
Drill-down Behaviour in Power View
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

BEx rport drill down issue

Hi,
I have a a report in BI 7, it have the drill downs. When I inseted the rows above the drill down row, the drill down button is not getting moved, it still present in the new inserted row. I need this to be moved along with moved row. Please advice.
Thanks in advance!!
-JayaPrakash

Hello Jayaprakash,
Are you using BEX Report, if so you cannot move the rows or columns using Excel function, but you have to use BEX function to move the cells
In the BEx Toolbar -> Choose Layout -> Choose the required fucntion to move the result
Thanks
Chandran

Creating Drill Down report in reports 6i

Hello All,
how to create a drill down report in 6i. the requirement is i have a report which displays the summary of grades like
Grade count of jobs
A 10
B 25
C 5
etc. when the user clicks on the Grade the details of the count has to be displayed...how to do this...?
thanks in adv
regards
Kris

Hi,
You can enable Drill Down function by right clicking Section Name and choose
Drilldown OK.
Refer to the link for the complete details.
http://crystal-reports.blogs.webucator.com/2010/05/28/crystal-reports-drill-down/
Thanks.
Clint

Drill Down Report in SAP B1 through Crystal Reports

Hi Gurus,
Is it possible to make a reports through Crystal Reports in SAP B1 ....
Please help or give some examples if you can ....
Thanx SK

Hi,
You can enable Drill Down function by right clicking Section Name and choose
Drilldown OK.
Refer to the link for the complete details.
http://crystal-reports.blogs.webucator.com/2010/05/28/crystal-reports-drill-down/
Thanks.
Clint

Enabling Drill Down Buttons on queries

Similar Messages

Maybe you are looking for