Enabling EAX tm for Sound Blaster ZS under windows 7

My sound card used to have EAX support under windows xp 32-bit, thus I could enjoy that choice of noise within video games. Now the options in video games tell me that I don't have that EAX capability. I'm rocking windows 7 32-bit and don't know what to do for this [email protected]

You install Alchemy yet for those DirectSound3D games yet? Even better use this,
http://forums.creative.com/t5/Sound-...009/td-p/53838
and get Alchemy as well as quite a few of the apps that used to work in XP. And in case you haven't heard of Alchemy,
http://connect.creativelabs.com/alchemy/default.aspx

Similar Messages

  • CMSS for Sound Blaster Z

    Hi All,
    Is there a way to enable a CMSS or to sterio upmix method for Sound Blaster Z soundcard,
    I found it rather disappointing since I'm using 5.1 setup (logitech Z-5500) I though it was an upgrade from X-FI Fatality series and found out there was no CMSS feature that comes with SBZ.
    Do we have a way to enable it manually, like a tweak or something?
    Thank you

    CMSS was superseded by THX TruStudio Surround, which itself was either superseded or renamed into SBX Pro Studio Surround. You'll find it on the SBX Pro Studio tab of the control panel, as the first checkbox.
    I personally prefer how the SBX version sounds compared to CMSS (which is just as well, since that's the only way I can really use headphones these days due to hearing loss). The only real limitation it has compared to CMSS is that you cannot specify it to simply do a dual-stereo or the like - it will always add a faux 3D effect to it.

  • Finding the ASIO driver for Sound Blaster ZS

    Finding the ASIO driver for Sound Blaster ZS
    And One More question
    Anybody are using the Guitar Rig (Guitar effect software)
    How to detect the Sound Blaster ZS sound card with WDM Driver

    shlomokg wrote:
    Hello,
    I am trying to use my Sound Blaster LX with the new Adobe Audition 2.0 with no luck.
    With the new version 2.0, Audition came with this ASIO solution that should make things easier.
    Somehow for me it does not work.
    Please advise, what should I do that Audition will work with my sound card?
    Thanks,
    Shlomo
    Perhaps Asio4All or USB-ASIO (LX not said to be supported) driver is needed to be installed to get a sort of ASIO support for that USB device.
    jutapaMessage Edited by jutapa on 07-2-2006 07: PM

  • Manual for Sound Blaster Live! CT4670 needed

    I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

    0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
    ?http://support.creative.com/kb/ShowA...=ws:,case=0846
    so using that here is a link to the manual,
    http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

  • Windows Vista Driver for Sound Blaster 5.1 P

    I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

    Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

  • Software Installation for Sound Blaster X-Fi Notebook

    5Software Installation for Sound Blaster X-Fi Notebook[ Hello, I have searched through the sound blaster forum for an answer to my question, but have been unable to find it.
    I recently recieved a sound blaster x-fi notebook. When I inserted the unit into my computer, the drivers installed just fine and I am able to use it, however, when I try to install the software bundled with the product on disk, something goes wrong. To be honest, I have no idea what it is. The problem seems to be with the install wizard itself on the disk provided me, because the install progress gets to about 20% and freezes while installing the Creative Console Launcher. I'm not sure if I just need a new CD, or if it is a problem with the software itself and nothing can be done.
    If anybody can provide some insight as to what the problem is or how I can fix it, I would be very appreciati've.

    Hi,
    Glad that it work for you. I think someone is asking for feedback in that driver download thread. Maybe you can post your feedback there on how is it for your x-Fi Notebook with the new driver set. I believe there are others who would be like you and would certainly love to hear any good news. Everyone has always been posting on what's bad and what's not working, but i think we should also post to tell what's good and what's working.

  • Announcement: New beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma - 21st Jan 2011

    Hi all,
    There are new beta firmwares available for Sound Blaster Tactic3D Alpha & Sigma. For those who are experiencing low volume with the microphone, download the corresponding beta to see if it hel
    ps.
    For Windows:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma
    For Macintosh:
    Beta firmware for Sound Blaster Tactic3D Alpha
    Beta firmware for Sound Blaster Tactic3D Sigma

    Hi,
    I confirm that the two files SBTA_PCFW_BETA_US_D0_0_2.exe and SBTS_PCFW_BETA_US_D0_0_2.exe are corrupted (not Win32 applications). The downloads do not complete and stop respecti'vely at .36 KB and 05 KB.
    Creative, you have to reupload the files on your webserver.
    Download done with XP and IE8.
    Bye.

  • Hardware IDs for Sound Blaster World of Warcraft Headsets

    Hi all, If for some reasons your WoW headset is not functioning as intended and you have gone through most or all of the troubleshooting steps, please do a check on the hardware ids of the headset. If the hardware ids for your headset is different, please get in touch with our Customer Support to arrange for an RMA. Hardware IDs for:Sound Blaster World of Warcraft HeadsetHardware IDs for:Sound Blaster World of Warcraft Wireless Headset

    Hi Krusekontrol,
    Please PM me your email address. We'll try to get someone from support to assist you with the RMA.

  • Driver for sound blaster pc

    I search drivers for sound blaster pc28. Thanks

    If you don't mind I would like some more information about this like:
    Your operating system and the model of your dell, along with how the prompt was presented--i.e. the driver installation program presented the error.
    Thanks
    Johnathan
    Computer & Network Technician

  • Driver for sound blaster 1024 win

    Hello id like to know where can i download the driver for sound blaster li've 024 for WinXp?thanks a lot?

    Duplicate post.
    Jason

  • Rear Channel Sound Volume Controller for sound blaster Aud

    Hi?Every body Wish you a wonderful new year 2008,?I am using creative sound blaster Audigy? sound card and the speaker system is creative inspire 5. I have the volume controller for front and center and subwooferbut i don`t have the controller for rear channel and the same time the rear channel is working with the low volume?not able to hear the sound from the rear channel but its working fine if i go near to the speaker i can hear the sound very lowi need to increase the sound for the rear channel?If any body know how to control the rear channel for sound blaster audigy could you let me know .... System Specifications:Operating System :Win -XP Sp2Memory : GBVideo Card :Ausus ATI Radian card?

    op
    ps.
    i want to add. some additional information, my 5. speaker doesn't have digital output, the line out for the sub woofer and centre are red and white line just like the same as the other speaker line, i don't know weather it will cause the front doesn't work or not, but i had read some post it said "In the <B>Creative Mixer</B>, be sure to <B>disable</B> the option for <B>Digital Output Only</B>, and set the number of speakers accordingly. For example, if you have a 5. channel speaker system, select 5.."
    if, i didn't change the creative mixer to "disable the option for digital output", will it cause the centre and sub woofer have no sound at all? plesae reply A.S.A.P. as i don't know weather it is the problem of the sound card or just a problem of the setting.....thanks alot.

  • Update for Sound Blaster

    Okay, so I have the most recent update(SBAX-PCDRV_LB_2_8_00) for Sound Blaster Audigy, when I try to install I keep getting an error message "set up is unable to detect a supported product on your system" so what gives here, is creative just playing games or what ?
    :angry:

    I have similar problems, not only on the front panel either. Basically many power spikes will rattle the card and cause all sorts of problems including the one you mentioned. Advice- power down before connecting or disconnecting anything.

  • Can't install driver for HP P1006 LaserJet under Windows 8.1 64 bit

    Hi,
    I can not install the driver for HP P1006 LaserJet under Windows 8.1 64 bit.
    I download the driver installation program from the HP website. When I run it, it says reinstalling the driver files, then copying files to the hard drive and then it crashes. I also tried using the driver CD that came with the printer to no avail.
    The printer works fine on my other laptop with Vista on it. Help!

    Hi peshi77,
    Welcome to the HP Support Forums! I see you are trying to install your HP Laserjet P1006 to your computer running Windows 8.1, but everytime you attempt to extract the files it crashes. After some research I see there were no updated drivers made available for the Windows 8.1 OS, you must install the Hostbased Plug and Play Basic Driver, to get the basic printing functions. Please click on the link below to download and install:
    HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
    Once downloaded, please follow the on screen instructions. I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

    I have problems installing update for PS Elements 9 under Windows 8.1. Are any problems known?

    Nobody can tell you anything without proper technical details. There is no point whatsoever in throwing around generalized assumptions without having exact error messages and so on.
    Mylenium

  • New Critical Update for Sound Blaster Audigy 2 ZS (2000/XP/XPx

    <SPAN>Hi
    <SPAN>Today ,Creative Labs have released a Critical auto update, for the Audigy 2 ZS, Audigy 2 and Audigy 4 PRO card.
    <SPAN>The critical update is a new utility application called the "Audio Console". This new application is a step in the right direction by Creative as it enables easy access to a lot of the cards functions. (speaker settings, EAX, CMSS, and the decoder can all be <EM><SPAN>tweaked</EM> using this application.
    <SPAN>For those of you, who do not use the Auto-update software you can find the Audio Console application under your products manual downloads webpage.

    (Re: Sound Blaster Audigy 2 ZS - No Sound? Try this:
    This is a software package created by a user, Daniel K. which includes most all of the software updates as well as the newest or second to newest driver for your card. This will install everything you need to use that card.
    Even if you had the original install Cd, this package is better, as it fixes some of the original incompatibilites with the software and includes their newer versions as well.
    http://forums.creative.com/t5/Sound-...28/td-p/535299
    The package is great. It installs fairly quickly for a package of its size. I have used it myself for quite a while so I know that it works very well.
    After installation be sure that you have at least? a two speaker set plugged into the green jack on the back of the card. Sometimes people plug their speakers into the wrong jack and then feel they have no sound for an unknown reason.

Maybe you are looking for

  • Header not getting  displayed in the next page in the second table

    Dear Experts , I have a query regarding Header not getting  displayed in the next page in the second table of the main window. .Let me elobrate the issue. I have a smartform in which there are  2 tables TABLE 1 and TABLE 2 in the smartform MAIN windo

  • ITunes account, purchases & family share with divorce

    My wife, daughter and I each have individual iCloud account but we have been using my account as the iTunes store account for purchasing content. I set up the new Family Sharing option with my account as the master account. What happens if I disconti

  • Help with text box rasterization in adobe muse

    When ever I create a text box, add some text , highlight the text and try and create it into a hyperlink, it says that the text requires rasterization and that the hyperlink will not work. How do I 'rasterize' the text box which will allow me to conv

  • Transfer audio from garageband to adobe premiere

    Hello all, like the title says, how would i go about transferring audio from garageband to adobe premiere? I'm making a short movie and want to add narrative audio i recorded in garageband to movie clips i have in adobe premiere cs5, i have the lates

  • Horizontal scrolling use MOUSE_MOVE event problem

    Hi, I have a a thumbnail scroller that scrolls images horizontally and inverted when I move the mouse. It works fine on its own, and is giving me the results I want, but whenever I put it in my project, it won't scroll properly. Like, the scrolling i