Enabling Encryption Issue (MobleMe)
I have been trying to enable encryption for the past hour. Before I go into it I am on a Free 60 Day Trial of MobileMe. None of the following worked
1. I have deleted and recreated a certificate several times.
2. I deleted all the plists for com.apple.iChat.
3. I reduced the length of my password to < 16
iChat 5.0.3
I could not find any other suggestions. Is there something I am missing?
I do find it strange that the top window says AIM Buddy List. I setup the account by selecting MobileMe. It seems to want to default to my mobileme user name with .MAC when setting up the account. In the accounts settings it does show my mobile me account with the .me icon.
Try the MobileMe or iChat forums.
Similar Messages
-
Encryption issue with Xperia Z2 - hangs intermittently - anyone come across this?
Hi all,
I'm on my second Z2, having returned my first for what I thought at the time may have been a hardware issue.
Basically the device intermittenlyhangs and the screen cannot be switched on with the power button on the side. It needs a reboot via the Power and Volume up buttons. I can reliably reproduce the hang by downloading one of the 6 free movies to my SD card, but it also happens intermittetly when I'm not using the phone. If it hangs during download, the charge rapidly drops (eg from 100% to 69% within 30 minutes) and the unit gets very hot.
I bellieve I've isolated this issue to enabling encryption for the device and SD card. Without these options enablied the device is rock solid. I have reproduced the issue on my replacement. phone. No apps other than those supplied out the box were installed at the time. Having subsequently removed encryption - a huge pain as it meant a factory reset , reformat of my SD card and re-download of the movies due to the DRM - the phone is rock solid once again.
Encryption is a standard feature of Android, which I've been using on my previous Samsung Galaxy S3 and S4 with no problems whatsoever, so this is quite worrying if it is a bug. On a non related note - I disovered also that the backup application does not work if encryption is enabled.
Just wondering whether any other Z2 users on the forum have come across this issue so far?Hi again,
Just posting a follow up.
I've done some testing and I seem to have narrowed the problem down to the use of the Sony Movies application with encryption enabled on the Z2.
If I launch the Movies application and start a download of one of the 6 free movies, and leave the phone alone, then it eventually hangs as I've described in my OP. If I press the Power button shortly after the hang happens the screen does not switch. If I hold the power button down the Z2 spontaneously reboots If however the phone has been in the hang state for a while then it can only be recovered by using the Power and Volume+ buttons.
The hang also occurs if I launch the Movies application and leave it running in the background. The phone eventually goes into the hang state. The battery charge rapidly drains down during the time the phone is in the hang state, losing 30% or more charge in a short time.
If I do not launch the Movies application then the phone appears stable with encryption enabled. If I do not enable encryption then the phone is rock solid. This behaviour has occured on my original Z2 and on the replacemement that my mobile operator sent me, as I orginally thought my first unit had a hardware problem.
I've sent a description of the issue to Sony via the "Contact us" link on Xperia Care Support. Hopefully this will be addressed. -
This is in regard to hard drive encryption issues in my USB Hard drive. I have Windows 7. I was encrypting my USB hard drive and
was able to enter a password. However, I did not receive any prompt to save the Bitlocker recovery key. During encryption process, I received an error. The encryption process was unsuccessful. However, now when I plug-in the hard drive, I receive the
following message on the status bar:
Application and Device Control rule Block writing to removable media. Unencrypted drive found (No_Encrypted_Found) has blocked edpa.exe trying to access Volume
{e3901a75-f1ff-11e1-817c-806e6f6e6963 alpha-numeric number appearing here}
When I try to open the drive, it asks for a password. When I enter the password, I am receiving the following error message:
Bitlocker Drive Encryption failed to recover from an abruptly terminated conversion. This could be due to either all conversion logs being corrupted or the media
being write-protected.
I have read that Bitlocker repair tool can help resolve this issue.
However, I just have the password that I had set to encrypt the drive and Bitlocker recovery key identification. Can this help to get access to my hard drive data using the Bitlocker tool.Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/bitlocker-drive-encryption-failed-to-recover-from/232e812b-4f7a-e011-9b4b-68b599b31bf5
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Can you help with encryption issue with iBook G3?
I have an iBook G3 with operating system 10.2.8. As of yesterday, I am having troubles connecting with my wireless service. It works fine when I plug the DSL cable in. The wireless icon shows up several networks; the one we are paying for is checked. Yahoo will not connect at all; some other websites will. I called our AT&T service and the tech support told me that it is an encryption error. Mac online support cannot help because the computer is too old and beyond warranty. I don't know what an encryption issue means. Can someone help? Thank you!
Hi, and welcome to Apple Discussions.
Read the instructions in the following Apple Knowledge Base carefully, paying close attention to the section entitled "AirPort client to third-party base station":
http://docs.info.apple.com/article.html?artnum=106424
Are you able to determine which type of encryption is used in your wireless network, based on comparing what you see on the iBook to the two diagrams? -
PowerShell Script to enable encryption
Hi All,
I am hoping I can get some assistance. I am looking to create a script that will do following:
1. Enable Encryption
2. Backup Encryption Key and/or TPM Data to specific location and specific file name: ex: Computer Name or FQDN
Is this possible?There's the Bitlocker cmdlets, like Enable-Bitlocker. See
https://technet.microsoft.com/en-us/library/jj649829.aspx
This appears to encrypt drive when not encrypted already (or resume encryption when currently paused, as it states there).
About writing key protector to a text file:
http://blogs.technet.com/b/leoponti/archive/2013/08/17/powertip-use-powershell-to-write-bitlocker-recovery-key-to-text-file.aspx
Have not tried this myself though. -
Hello,
I'm currently stuck on a issue with encryption. I've set up in General Settings Safe Harbor Encryption and also encryption for removable devices. On the USB drive I have no problems files get encrypted just fine. The issue is with Safe Harbor. Checked the option, restarted the computer, the folders are in the root of each drive, but no matter what file I put in there I can still read it. I tried logging out from Novell Client, logged on the same computer with other user and still I can see the content of the file. Any clues on this? The documentation on this is pretty straight forward.
Thank you!It is WAD (working as designed).
The best way to test encryption is to share the safe harbor folder, and try to open the files from across the network.
You need to setup password encryption for the ZSC to ask the user for a second password in order to add a second layer of protection - if the user don't know this second password, then the ZSC will no decrypt the safe harbor's content.
I'm with you that the docs are not very rich when it comes to explain how encryption really works.
Best,
Daniel
>>>
From: Sebymargis<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 9/8/2010 12:36 PM
Subject: Safe Harbour Encryption issue
Hello,
I'm currently stuck on a issue with encryption. I've set up in General
Settings Safe Harbor Encryption and also encryption for removable
devices. On the USB drive I have no problems files get encrypted just
fine. The issue is with Safe Harbor. Checked the option, restarted the
computer, the folders are in the root of each drive, but no matter what
file I put in there I can still read it. I tried logging out from Novell
Client, logged on the same computer with other user and still I can see
the content of the file. Any clues on this? The documentation on this is
pretty straight forward.
Thank you!
Sebymargis
Sebymargis's Profile: http://forums.novell.com/member.php?userid=54189
View this thread: http://forums.novell.com/showthread.php?t=420385 -
Any resolution to 10.4.10, wireless router/encryption issues?
Like many others, I upgraded to 10.4.10 and soon began experiencing connecting to the Internet problems on my ATT/2WIRE gateway/router using WEP encryption as well as kernel panics.
Having had my MBP for only two months, I did not have many files so I did a Erase/Install using the disks (v. 10.4.8) that came with the laptop. Immediately after this procedure, I updated to 10.4.9, did permission repairs. The gateway/router issue and the kernel panics with 10.4.10 were gone. Without having installed anything else, I did the combo update to 10.4.10 again (did permission repair before and after) and after the double reboot, I was able to reach the Internet. I then went on to battery and sure enough the Internet connection was lost after about 10 minutes. Then came the kernel panic. I resorted to doing another Erase/Install and updating only to 10.4.9 and since then, no problems at all, even on battery.
I've read through the discussions on this but did not see if there was a resolution. Would 10.4.10 v1.1 resolve this issue? Or is this something that 2WIRE would need to update their firmware?Welcome to Apple Discussions!
Most likely 2Wire needs to upgrade their firmware. There is still a chance one of these other solutions on my FAQ* might work too:
http://www.macmaps.com/WIFI1048.html
* Links to my pages may give me compensation. -
Senario:
Need to manage 500 Enterprise iPads
Requirements;
1) Trackable via Find my iOS device (we have 500 iPads and with the 100 device limit per iCloud account for Find my iOS device limit we have 5+ iCloud accounts).
2) Individually named iPads for locating and sending commands to wipe, lost mode, etc.. on map per Find my iOS device (we uniquely name them in Apple Configurator either by using the "sequensetially numbering feature", or by creating individual back ups (yes, 450) with the name specified in the image).
3) Find my iOS device feature enabled in base Prepared or Supervised image (using one of our 5+ iCloud accounts) (image can be created during prepared stage, or in supervised stage) - tried both and have the same issue - which I am getting to...
4) VPP codes for paid apps (all VPP codes purchased with generic account which is the Apple Admin account for VPP purchases). Apple Configurator is set up under a different/ unique Apple account (i.e. not VPP admin account) and not logged into iTunes for any purchases/ services).
Issue: Can not do any following senarios;
A)
1) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Prepare stage (added during preparing stage)
2) configure master iOS 7 iPad with iCloud account with Find my iOS feature enabled in Supervised stage (added after supervising, and then backing up that supervised and iOS Find my iOS device enabled)
B) 1) Apply master image to any Supervised iPad (under senario step A) or senario step B)), including the (Supervised or/ Prepared iPad that was used to create the maset iOS 7 image
Result = fail with Apple generic code "4" ; This is obviously due to Find my iOS device feature enabled during image capture.
According to Apple (see Apple Config. Help) the 'Activation lock' (new feature in iOS 7) will not be enabled on a supervised device when an iCloud account with "Find my iDevice" is enabled. Their "help files" seem to imply after the device is Supervised, and a person (presumably and end user) adds thier own iCloud account with Find my iOS device enabled the activation lock is not enabled and erasing/ reconfiguring with Apple Configurator will not cause reimaging probhlems such as requiring the end user's credentials to reconfigure the device using Apple Configurator (i.e. you won't need the end user's credentials).
Needed: To be able to configure Supervised iPads with iCloud account (Enterprised owned iCloud account) configured on the basse image, which has Find my iOS device enabled, and to be able to apply that base image to all Enterprise iPads without generic apple error code 4 issue.Hi all
I am trying to replicate these steps in my environment but I am having trouble getting an iCloud backup restored to a supervised device. Can someone clarify the steps? The parts I am unsure on are:
1) Do you Prepare in Configurator with all the institution owned apps? Or do you install them after restoring the iCloud backup?
2) After entering the personal AppleID to restore the iCloud backup, the setup wizard prompts for the Institution/Configurator AppleID, there is an option to 'Skip Now'. Do you enter in the password for the institution account? or do you skip that step?
3) What exactly is on the screen in the 'mini setup assistant' after the restore when you Refresh with Configurator?
Any help would be greatly appreciated! -
I have set up several email enabled calendars in SharePoint 2010. The users create meetings in Outlook and invite the SharePoint calendar using the email address set up for the calendar.
We are having some odd issues with recurring meetings. The meetings will show up in the SharePoint calendar when viewing in the browser, but are missing from the SharePoint calendar in Outlook.
If a user cancels one of the meetings in the series, the item shows as cancelled in the SharePoint calendar, but 3 blank calendar items are also created.
Any ideas?Hi,
According to your post, my understanding is that you had some issues with the SharePoint calendar.
We are having some odd issues with recurring meetings. The meetings will show up in the SharePoint calendar
when viewing in the browser, but are missing from the SharePoint calendar in Outlook.
Did the issue occur when click the F9? You can click the F9 to check whether it works.
If a user cancels one of the meetings in the series, the item shows as cancelled in the SharePoint calendar,
but 3 blank calendar items are also created.
Did the issue occur in other calendars? You can create a new calendar to check whether it works.
Maybe the calendar had been corrupted.
Or you can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Transperant Data Encryption issue with database startup
Hi, I am trying to implemete TDE in oracle databse and have create encryption successfully too.
All the steps went on fine and encryption is working successfully.
now, I have an issue everytime when database shutdown and startup.
for which I have created a procedure to open the wallet and a trigger to open the wallet on DB startup.
here is the example : tde_proc.sql
1 create or replace procedure open_wallet
2 as
3 wallet_open exception;
4 pragma exception_init(wallet_open,-28354);
5 v_stmt varchar2(100);
6 v_password varchar2(20);
7 begin
8 v_password:='abcdef1' ;
9 -- edit the following line to store your secret wallet password
10 v_stmt :='ALTER SYSTEM SET ENCRYPTION WALLET OPEN IDENTIFIED BY "'||v_password||'"';
11 execute immediate v_stmt ;
12 exception
13 when wallet_open then
14 null;
15 end;
16 /
@wrap iname=tde_proc.sql
Processing tde_proc.sql to tde_proc.plb
SQL> @tde_proc.plb
Procedure created.
TRIGGER :
create or replace trigger open_tde_wallet
after startup on database
begin
-- call wrapped pl/sql pocedure
open_wallet;
end open_tde_wallet;
SQL> @open_wal.trg
Trigger created.
when I startup the database, alert log is showing the below error.
Errors in file /opt/oracle10/admin/bmp10/udump/bmp10_ora_18396.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-28353: failed to open wallet
ORA-06512: at "SYS.OPEN_WALLET", line 11
ORA-06512: at line 3
Thu Jul 23 17:36:41 2009
Completed: ALTER DATABASE OPEN
Please give me some solution to resolve the issue.Hi..
Thanks for your reply.
1. yes variable v_password and wallet passwords are same. I had double checked after reading your reply. variable pwd
and encryption wallet passwords are same.
2. the entryof ENCRYPTION_WALLET_LOCATION in the SQLNET.ORA is also added.
here is the sqlnet.ora
ENCRYPTION_WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /opt/oracle10/admin/tstbmp10/encrypt)
Thanks,
Krishna -
Enable encryption in WF notifications email
Hi,
We have a requriement where organization considers some data to be sensitive data for email notifications.
We need to send this data just like Send Secure feature available in Outlook in order to comply with our company policy.
Is there any integeration available in Oracle Workflow Notifications to enable notification contents to be send secured.
Also note we do not need to send every other notification as secured email only selected few.
ThanksSooooo ... Notifications are delivered to a User and only visible to the user/users via a responsibility using eBusiness. However, if you have WF Mailer turned on, then it does get emailed. In that case, you can configure a notification mailer to connect to the SMTP server and IMAP server through Secure Sockets Layer (SSL) to encrypt the data exchanged.
See: https://docs.oracle.com/cd/E18727_01/doc.121/e12903/T319398T319402.htm#wfmlrssl -
Aaa authentication enable console issue
I have an ASA5505 running 8.2(5). It is configured with
aaa authentication telnet console xxxxxx LOCAL
and I am able to use my username and password to telnet in, but I then have to use the local enable password to get to privilege exec mode.
I tried configuring aaa authentication enable console xxxxxx LOCAL so that when I try to access privilege exec mode,I would be prompted for my password instead of the enable password, but it doesn't work.
I also tried removing the aaa authentication telnet console xxxxxx LOCAL and telenetted in with the local passwd.
I was prompted for a username and password when trying to get to priv exec mode, but again, the credentials did not work.
Could there be something that needs to be changed on the ACS server to make this work?
Thanks.Using TACACS+
No command authorization rules are being used
When I add the aaa authentication enable console xxxxxxxx LOCAL command,
and use login instead of enable, I get Login failed if I try to use my credentials.
However, if I use login with the locally configured username and password, it lets me in.
Here is the config (without the aaa authentication enable console command):
User Access Verification
Username: xxx/xxxxxxxxxx
Password: ************
Type help or '?' for a list of available commands.
FW> en
Password: ********
FW# sh ru
: Saved
ASA Version 8.2(5)
terminal width 511
hostname xxxxxxxx
enable password *********** encrypted
passwd *********** encrypted
names
interface Ethernet0/0
switchport access vlan xxx
interface Ethernet0/1
switchport access vlan xxx
shutdown
interface Ethernet0/2
switchport access vlan xxx
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlanxxx
nameif inside
security-level 100
ip address x.x.x.x x.x.x.x
interface Vlanxxx
nameif OUtside
security-level 0
ip address x.x.x.x x.x.x.x
ftp mode passive
same-security-traffic permit intra-interface
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object udp
protocol-object tcp
group-object TCPUDP
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object udp
protocol-object tcp
group-object TCPUDP
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_4
protocol-object ip
protocol-object udp
protocol-object tcp
access-list Outside_access_in extended permit ip any any
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_1 a
ny any inactive
access-list inside_access_in extended permit object-group DM_INLINE_PROTOCOL_4 a
ny any
access-list OUtside_access_in extended permit object-group DM_INLINE_PROTOCOL_1
any any inactive
access-list OUtside_access_in extended permit icmp any any
access-list OUtside_access_in extended permit object-group DM_INLINE_PROTOCOL_3
any any
pager lines 24
logging enable
logging asdm informational
logging host inside x.x.x.x
mtu inside 1500
mtu OUtside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group inside_access_in in interface inside
access-group OUtside_access_in in interface OUtside
route inside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server xxxxxxxxx protocol tacacs+
aaa-server xxxxxxxxx (inside) host x.x.x.x
key *****
aaa-server xxxxxxxxx (inside) host x.x.x.x
key *****
aaa-server xxxxxxxxx (inside) host x.x.x.x
key *****
aaa authentication http console ******* LOCAL
aaa authentication ssh console ******* LOCAL
aaa authentication telnet console ******* LOCAL
aaa local authentication attempts max-fail 5
http server enable
http x.x.x.x x.x.x.x inside
http x.x.x.x x.x.x.x inside
snmp-server host inside x.x.x.x community ***** version 2c
snmp-server host OUtside x.x.x.x community ***** version 2c
snmp-server host inside x.x.x.x community ***** version 2c
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet x.x.x.x x.x.x.x inside
telnet x.x.x.x x.x.x.x inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config OUtside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ******* password ************** encrypted privilege 15
username ******* password ************** encrypted privilege 15
username ******* password ************** encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:
: end
FW#
Thanks. -
Crosstab - Enable Selection issue
Hello Everyone,
I have a cross tab with Summary data and have set - Enable Selection option true (which will enable rows selection).
Now I also have On Select script which picks up the selected value and pass it on to next table for detailed view based on selection.
When I do single click on the row in summary tab it will pick the value selected and pass to detail view for filter and it works fine.
Issue -
But when is double click the same row in summary tab it will not pass the correct value and show some wrong data.
Did any one faced this kind of issue?
Thanks,
RajanHi Rajan,
In crosstab the first click will select and the second click is deselect that particular row.
so when you double click it is selcting and deselecting, this might be the reason it's acting like that,
Regards,
Fazith Ali Z -
Disabled then enabled account issue....
Here is the issue I am having. There was an account that had been disabled. Today I went and enabled the account and tested it on one of my Windows XP sp3 PC's that has the 4.91sp5 client on it, was able to log in just fine. Just got a report that on a Windows 7 sp1 x64 PC using the Novell Clien 2 sp3 for Windows 7 (IR3) that the account is not being able to be logged in on using the account. The error that is given is a pop up Novell Security Message saying "Your account is disabled or expired! Contact your System Administrator." Behind the pop up is a error "Login failed Error code: 0x800789DC". I have tried this on other win7 PC x64 PC's and they all give the same error.
Background on our network we are obviously Novell shop running ZCM 11.1 and our servers are OES2.
thanks for your help.And check to make sure the CN does not exist in multiple containers,
with one disabled and one not................
On 9/12/2013 2:16 PM, laurabuckley wrote:
>
> Hi,
>
> Just to check the basics... have you double-checked that there is no
> expiry date on the account?
>
> Cheers,
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Configure SSL enabled communication issue
Hi Experts,
I'm having this wierd issue.. Installed SharePoint like for the 10th time in my life or so. But this time when I was doing this "Configure SSL enabled communication" steps the Powershell window just hangs forever.
PS C:\FASTSearch\installer\scripts> .\SecureFASTSearchConnector.ps1 -certPath "C
:\FASTSearch\data\data_security\cert\FASTSearchCert.pfx" -ssaName "FAST Content"
-username "domain\user"
Enter the certificate password: **********
Installed certificate.
Updated acls on certificates private keys.
Nothing happens after that. It usually will say the below but it freezes for me.
Updated acls on certificates private keys.
Your FAST Search Connector has been setup to use certificate, restarting osearch14.
Connection to contentdistributor host:port successfully validated.
Until I restart the osearch14 manually from services. But after that the contentsource page is never opening up for me.
I'm I missing something obvious? Or I'm I facing some premission realted issues? nctrl status shwoings everything is running. Any pointers will help.
Thank you.
Freddie Maize ..A story with Glory is History. Doesn’t matter whether Glory rest in the world of Demon or God. Lets create History..Thank you for your response.
Yes I have set the particular proerty SSLAlwaysNegoClientCert to True and it is able to establish the ssl conneciton without initiating renegotiation from IIS server side.The property has to be set the metabase.xml file.
Thank you very much once again.
Edited by: arpitak on Jun 23, 2010 2:10 AM
Maybe you are looking for
-
I cannot seem to create iPhoto books any longer. When I choose the library in the source pane and click add book or add album, only the first photo in the library appears in the new book or album. I can't seem to get the entire album to show in order
-
My CD player in my house has a 3.5mm headphone jack where i can plug in my headphones and listen to the music coming from my cd player. would this work for one of those 3.5mm to 3.5mm(male to male) cords, so that i could listen to my ipod through my
-
House Bank selection at the time of Payment run
Hello All, At the time of automatic payment program, The user has to select the house bank for the payment irrespective of ranking order maintained in the FBZP. And I dont want to give the house bank in all the line item at the time of posting or rea
-
Cannot change from default printer in Acrobat X by code
pp.printerName = "\\\\print server\\printer"; works flawlessly in Acrobat 9 Standard but will not change from default printer in Acrobat X Standard unless run in the console. I've checked the printer names through the console and they are listed corr
-
Converting small letters in to Capital letters
Hi I have a scenario where the input is in small letters and i wanna convert in to capital letters befor sending it to BAPI .. as BAPI accepts Capital letters as input ... any idea how we do that... SV