Enabling Encryption Problem

I followed the instructions in Article: HT4175 titled 'iOS 4: Understanding data protection' at least 3 times. Despite backup, wiping the phone of all personal data and restoring I can't get the sign 'Data protection is enabled.' to show. I've used 4 digit passwords and more complicated ones to no avail. I have to encrypt work information, I am in health care. What am doing wrong?

Could the problem be that my phone is very nearly full, i.e. only as 230MB left?
No.
Have you tried restoring as a "new" device & not from backup? If not, try that. When finished, eject your phone, DO NOT SYNC any content back to your phone, rather verify that all is working properly. If so, sync your content back to your phone. If not, make an appointment at an Apple store.

Similar Messages

  • DWL-122 Encryption problems

    Got a little problem. I have got a D-Link DWL-122 wireless usb stick for my G3 ibook (running OS 10.2.8). When no encryption is used on the express station, the ibook can connect to the wrieless easily with no problems. When I enable encryption on the express station (private WEP 1), along with updating the ibook with the passwork it can no longer connect.
    Yes the password is 100% correct and I have tried all the different WEP types on the DWL-122 software (eg Apple password, 104 bits HEX etc).
    just wondering if anyone has a DWL-122 and express station and got them working together with encryption enabled?
    thanks
    Connor

    Problems either with the driver or interface provided by D-link, if the hex equivelent of the networks password has a 0 in it, for some reason the dlink software keeps deleting the 0 and therefor cannot connect to the network.

  • HT201317 iphone not my photos are appearing in the photo stream and it's all enabled what problem?

    iphone not my photos are appearing in the photo stream and it's all enabled what problem?

    Welcome to the Apple community.
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.

  • Encryption problem caused by Adobe?

    Dear All,
    I am a video editor and exchange files with my collaborator via the cloud, but not via Adobe Cloud which does not allow .mp4 files to be sent due to copyright problems.  My cloud service is not allowing my collaborator to view my latest .mp4 file created by Adobe Premiere Pro 2014, stating that the file is encrypted.  I think this encryption problem is being caused by my cloud service, but I'm wondering if Adobe Premiere has inadvertently written any copyright encryption into this file that I'm not aware of.  This becomes very frustrating when you're trying to collaborate on a video of your own creation!  Thanks for your help.
    Small Town Gal

    Dear John,
    I tried the zip file, but it still could not be opened on the other end -- same error message.  Thanks.

  • PowerShell Script to enable encryption

    Hi All,
    I am hoping I can get some assistance.   I am looking to create a script that will do following:
    1. Enable Encryption 
    2. Backup Encryption Key and/or TPM Data to specific location and specific file name: ex: Computer Name or FQDN
    Is this possible?

    There's the Bitlocker cmdlets, like Enable-Bitlocker. See
    https://technet.microsoft.com/en-us/library/jj649829.aspx
    This appears to encrypt drive when not encrypted already (or resume encryption when currently paused, as it states there).
    About writing key protector to a text file:
    http://blogs.technet.com/b/leoponti/archive/2013/08/17/powertip-use-powershell-to-write-bitlocker-recovery-key-to-text-file.aspx
    Have not tried this myself though.

  • Enabling Encryption Issue (MobleMe)

    I have been trying to enable encryption for the past hour. Before I go into it I am on a Free 60 Day Trial of MobileMe. None of the following worked
    1. I have deleted and recreated a certificate several times.
    2. I deleted all the plists for com.apple.iChat.
    3. I reduced the length of my password to < 16
    iChat 5.0.3
    I could not find any other suggestions. Is there something I am missing?
    I do find it strange that the top window says AIM Buddy List. I setup the account by selecting MobileMe. It seems to want to default to my mobileme user name with .MAC when setting up the account. In the accounts settings it does show my mobile me account with the .me icon.

    Try the MobileMe or iChat forums.

  • I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

    I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

    I'm getting 100s of debug.log. files on my macbook OS 10.7.5. I've never seen them before. Should I be worried? They look like this: debug.log.100100_100119.sent. Is it an encryption problem? thanks for any help!

  • AEGE wireless encryption problem

    I recently bought an AE GE wich I received last week. When configured first time it was upgraded with 7.2.1 firmware, also my MBP was upgraded with latest Airport Utility 5.2.1. Connected to my AEGE I have 1 MBP, 1 AppleTV, 2 Fujitsu-Siemens Vista laptops through wireless and 1 sippura, 1 dreambox and one Oki C3200n wired. I also have a USB HD connected. Everything was great until the morning of the 5th day. Waking up my MBP I got connected to my WPA/WPA2 WLAN, but I only got a 169.x.x.x IP address. I checked the Vista computers, the same issue there, no DHCP only a 169.x.x.x address. AppleTV no IP at all. If I manually configure the computers with a IP address, some packets goes through, but the packet loss is huge.
    Whatever combination of encryption used and channel selected, the AEGE is unusable. Using no encryption on the wlan gives me normal behaviour. Right now I have downgraded to 7.2 but the issues remains. Hardware error or a software problem?

    Jeanna
    Panther will work wirelessly using encryption. You are probably just not setting it up right.
    +(powerbook G4 10.3)+
    http://discussions.apple.com/thread.jspa?threadID=1797218&tstart=0
    +(a detailed response from Tesserax)+
    http://discussions.apple.com/thread.jspa?messageID=8661356&#8661356
    As I said, repost your question over in the Airport forum, I don't know enough about the ins and outs of your encryption problem to help you.
    Sorry I couldn't be of more help.
    regards roam

  • Enable/Disable Problem?

    In the last few weeks, I kept experiencing problems while
    watching certain movies, specifically at IGN. Half-way though a
    problem would pop up, and end up shutting down the movie and my
    browser. It said there was a problem with something to do with
    Flash 9, and I clicked 'Advanced' and wound up in this
    disable/enable screen and I disabled the thing that seemed to be
    the problem but it must have been the wrong thing to do.
    Now I can't play any movie anywhere. All I need to do is find
    the folder or place where I was earlier and enable it but I have no
    idea how to get back to that options screen for Flash.

    In Internet Explorer, Tools ==> Manage Add-ons

  • Comment Enabled PDF problem

    Hi all,
    We have a huge design jobs which was done in Indesign, Pdf's which we have creted from Indesign will be comment enabled and send it to client for commenting purpose.
    Client Message:
    Acrobat would  freeze up when working with certain documents that have a water mark. I just  wanted to note that I am currently working on CL_VanDerbeck, chapter 4, and it  has been happening repeatedly. I have attached the file for  reference.
    We have open the file at our end and tried to add comments on the watermark part as they mentioned, there were no issues at our end. We are able to add comments on the watermark and other areas.
    What will be the problem since this question was raised by our customer second time. Is anyone came across these type of issue.
    Kavya

    Give them three more copies of the file. One with no comments or watermark. One with comments, but no watermark, one with watermark and no comments. Do they have problems with all three?

  • Lifetime enable caused problem

    Hi,
    I have published an xml form in a folder and enabled the lifetime to that folder as explained this link http://help.sap.com/saphelp_nw04/helpdata/en/b4/fd2c407586ea01e10000000a155106/frameset.htm. I have created a km iview to display the xml form. Now problem is that  users who have read only permission to this folder are not able to see the content as it is showing an error  404 resource not found. At the same time user who have full permission on that folder are able to see the content. There is no issue of Valid from / valid to, these parameters are correct.
    best reagards
    Hari

    You may have old quota files (they are hidden) on the volume you are trying to set with quotas.
    Look at the root of the volume with Terminal.
    ls -la will report all the files in the root. Remove the previous quota files
    .quota.ops.user and .qouta.user with sudo rm .quota*
    Server Admin will then be able to enable quotas on the volume.

  • Reader enabled portfolio problem

    Hi
    I have created a form in Adobe LiveCycle Designer which I have reader enabled in Acrobat.  I have tested the form in Reader and all the 'enabled' functions work.
    The problem is when I place the form into an Acrobat portfolio the form will not carry out any of the enabled functions such as saving the form.  Should the enabled form still work in a portfolio or not?
    Many thanks
    Darren

    Nope .....you may want to post your question on the Acrobat forum as they woudl get many more portfolio questions on that side than we get here.
    Paul

  • Snc/enable parameter problems

    Hello,
    The basic problem that we are facing is oss connection (RFC connection?) to sap from Solution Manager. To solve this, we activated parameter snc/enable=1 accordin Activating SNC on the SAP System Application Server manual. Then we stopped solman and started it again. Now we are in a situation that we cannot open solman with sap gui. When opening solman we get next error message.
    Time     Mon Aug 06
    Component     NI(network interface)
    Release     640
    Version     37
    Module     nixxi_r.cpp
    Line     8724
    Method     NiPConnect2
    Return Code     -10
    System Call     SiPeekPendConn
    Error no     10061
    Error text     WSAECONNREFUSED: Connection refused
    Counter     3
    We are using SUSE 10 with Maxdb.
    Kind regards
    Jukka Vesterinen

    Hello Markus,
    Thank you very much for your advices.
    I have now sent a fax (Remote Connection Data Sheet) to sap for opening oss connection (vpn) to our systems. This is under process so connection is not yet open.
    I have also downloaded SAPROUTER_8-20001567.SAR file and unpacked it to folder /usr/sap/saprouter.  Then we have made saprouttab file including following information:
    P  10.0.0.206       194.39.131.167      *
    P  194.39.131.167   10.0.0.206          *
    When we try to start saprouter with command saprouter -r we get following error message:
    ERROR => CTrcOpen: fopen dev_rout
    trc file: "dev_rout", trc level: 1, release: "700"
    Wed Aug  8 13:41:17 2007
    SAP Network Interface Router, Version 38.10
    command line arg 0:     saprouter
    command line arg 1:     -r
    trcfile  dev_rout
    main: pid = 25056, ppid = 24308, port = 3299, parent port = 0 (0 = parent is not a saprouter)
    ***LOG Q0I=> NiIBindSocket: bind (98: Address already in use)
    ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 3
        (SI_EPORT_INUSE/98; I4; ST; 0.0.0.0:3299)
    ERROR => main: NiBufServerHandleForAddr failed (rc=-4)
    LOCATION    SAProuter 38.10 on 'haukka'
    ERROR       service '0.0.0.0:3299' in use
    TIME        Wed Aug  8 13:41:17 2007
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -4
    MODULE      nixxi.cpp
    LINE        3174
    DETAIL      NiIBindSocket
    SYSTEM CALL bind
    ERRNO       98
    ERRNO TEXT  Address already in use
    COUNTER     2
    Should saprouter start although the connection to sap is not jet opened?
    Ystävällisin terveisin / Kind regards,
    Jukka Vesterinen

  • Enable encryption in WF notifications email

    Hi,
    We have a requriement where organization considers some data to be sensitive data for email notifications.
    We need to send this data just like Send Secure feature available in Outlook in order to comply with our company policy.
    Is there any integeration available in Oracle Workflow Notifications to enable notification contents to be send secured.
    Also note we do not need to send every other notification as secured email only selected few.
    Thanks

    Sooooo ... Notifications are delivered to a User and only visible to the user/users via a responsibility using eBusiness.  However, if you have WF Mailer turned on, then it does get emailed.  In that case, you can configure a notification mailer to connect to the SMTP server and IMAP server through Secure Sockets Layer (SSL) to encrypt the data exchanged.
    See: https://docs.oracle.com/cd/E18727_01/doc.121/e12903/T319398T319402.htm#wfmlrssl

  • Not Enable Field Problem!

    Hello,
    we are running a process where a field is set as enable = True, a value is inserted and then is set again as Enable = False. The problem is that some times, when we want to set the field as enable true an exception ocurred. (The item is not an user defined object) so we can't set any property of it.
    This problem is solved momentary by typing Ctrl - Shift - B, and setting enable the items. But is not a real solution because after a few time the exception  occurred again.
    So, someone knows a better solution for this problem.
    Thanks. !
    Ezequiel.

    Hello Ezequiel,
    Try to use a "Try catch"statement which you can catch the error.. and your application don't crash.
    See for more info:
    [http://msdn.microsoft.com/en-us/library/0yd65esw.aspx]
    [http://msdn.microsoft.com/en-us/library/system.exception(VS.71).aspx]
    Hope this helps...
    Regards,

Maybe you are looking for

  • Create a Credit Memo from purchase invoice

    Hi everyone, I am trying to create a credit memo from a purchase invoice, but it retuns the following error: "RFC is missing" I am using the JCO classes to develop this application. this is a sample of my code: IDocuments document = SBOCOMUtil.newDoc

  • Where to set the classpath for custom classes in jsp

    Hi, we have created our custom classes in and ported in contentDB and that classes are internally using some jar files. Previously we have set the classpath of all the jar files provided in CDB devkit in the orion-web.xml but if are opening the explo

  • Tax rates in import PO

    Hi All, Is their any configuartion for import PO, so that I need not to enter percentage manualy for import conditions every time? Every time in import PO I had to enter CVD percentage manually and their are total 8 conditions in import PO. Thats why

  • Report Designer Component for VS2010

    Dear All i have an application built in VS2003 and CRXI. Now i have to update the application using VS and CR 2010, but i come to know that RDC is not available in CR2010. i have to update the application with old functionality that offers the users

  • Help-think i have a kernel panic

    I need help, every couple of months my computer goes nuts and crashes either when i start up or when using the internet or entourage mail. Usual starts with colored little dots on the screen and then the screen goes grey and the restart message shows