Enabling guest/anonymous user accesss using sun access manager(opensso 8.0)

Hi,
How to enable anonymous/guest user login through opensso? In otherwords, if I try to access my application protected by opnesso, the user should be not be redirected to opensso login page automatically. Instead the user can see the content which is allowed for guest login. If the user clicks on login button on our site then the user should be directed to opensso login page where the user will enter proper credentials and will be allowed to full site content.
How to do this in opensso?
Regards,
Pratap

Hi Pratap,
[I just answered this over on the OpenSSO forum.|https://opensso.dev.java.net/servlets/ProjectForumMessageView?forumID=1554&messageID=30801]
Cheers,
Pat

Similar Messages

Sun Access manager

Hi all,
i am developing a sample application using sun access manager.it would be very helpful if anyone could help me out in giving some code examples and help me out in developing a sample web app.I have to use the oracle database to get the users and roles.If anyine could post me some sample code for the same it would be really great of u..
Thanx in advance,
Sidharth

ya thats right.....i tried the purejaasexample given in that...and it worked...but my problem is that....supppose i create an user in my db and then when his authntication is suceeded then can i know from the console who has logged in and all...tell me what is the best example i can try from the samples directory....
basically i want to create a smaple application using sun access manager and implement it in one of our companys big app

Sun Access Manager 2005Q1 session failover is not working

Hi All
I m using Sun access manager 2005Q1,message queue 2005Q1, Sun Directory server 5.2 ,BerkelyDb 4.2.52 and radware hardware load balancer with sticky session.
I m have configured message queue and BerkeleyDB and both are running with any error.
I m using http://docs.sun.com/source/817-7644/ch5_scenarios.html#wp41008 doc for session failover.
Simple failover is working fine but the Session failover is not working.
Any body has done session failover with Sun Access manager 2005 Q1 I m trying to resolve this issue last two month.
Please it is urgent.

It works fine in 2005Q4, after applying a patch 120954 if I am not mistaken. But 2005Q4 and 2005Q1 are probably different in terms of session failover (site configuration etc.)
1. Stop both AM servers
2. Set logging to debug mode in AMConfig.properties.
3. Delete / move everything in /var/opt/SUNWam/debug
4. tail -f /var/opt/SUNWam/debug/amSession
5. Post that file here... you should be able to see if session failover is enabled etc....
hope this helps.

BO Authentication with Sun Access Manager

Post Author: aboucher
CA Forum: Authentication
Hi,
Is there a way to use Sun Access Manager (Role base) with BO. We are using XIR2 but we are willing to move to XIR3 if this version can do this job. I know that BO can be configured with LDAP, AD, Enterprise but is there a Custom choice. Any idea?
Thanks

Post Author: TAZ
CA Forum: Authentication
So quickly reviewing sun access manager it doesn't seem to be an LDAP server per se. It's more like a portal used for SSO. If that's the case then you would integrate LDAP accounts and then use technology like trusted authentication for SSO from the sun access maanger portal. In that case trusted auth will support just about any front end as long as the user info can be forwarded to us in one of 7 methods. You can read more about trusted authentication in the XIR2 deployment guide
http://support.businessobjects.com/documentation/product_guides/default.asp
Integrations of this level typically involvel in depth planning and should probably be done with the assistance of a BO consultant.
Regards,
Tim

Problems about Sun Access Manager

when I using Sun Access Manager, I found It is very slowly to access "http://host:ip/amserver" , but I also using OpenSSO, It is normal to access "http://host:ip/amserver".
Can anyone give any suggestions ?
Best Regards!

Hi,
I added a page to the wiki which adds more detail to the steps to create the sample app policies on the am/fam/opensso server console UI. This includes some screen shots as well.
This is one good thing about the sample app is that you have to learn to install the opensso server, install the agent, configure the agents properties for the sample app security and also use the opensso server UI to create policies.
It is a bit of work, but when done you will know how to use a lot of opensso features.
You do not need a directory server. The sample app readme refers to some directory things that really can be ignored. The wording should be changed.
Anyhow you can use this wiki page along with the readme to help you set up the policies, the subjects etc that map to the sample app
http://wikis.sun.com/display/OpenSSO/samplepolicy
I will try to make a getting started page for new users, though you have done most the steps now, and need to set up sample. But this page might be useful for others who want to get started http://wikis.sun.com/display/OpenSSO/getstarted
hth,
Sean

Login to Sun access manager admin console failed.

we are using Sun access manager 2003Q4. Today i am not able to login to the amconsole itself.it says authentication failed. i tried with all the admin users we have and also with the amadmin same error.
The ldap is up and running.
can any one suggest me the probable problem and solution.
or the log files i need to look at which can help in trouble shooting.
thanks in advance

Check your AppServer to see it up and running or not.

Integrating siteminder and sun access manager

Hi,
I need to perform the following integration. I have an client which generates a saml assertion using Sun access manager which is consumed by another system which is again having Sun access manager. Now the client wants to move on to Siteminder. Would there be any compatibility issues? Would the recipient system having Sun access manager be able to consume the saml assertion generated by siteminder?
Thanks in advance.

SAML is a standard, therefore you should check SAML versions support in siteminder and do the proper configuration.

Using BEA Weblogic Portal with Sun Access Manager

Hello all,
I am wondering if anyone has had experience with using Weblogic Portal (versions 8.1 or 9.2) with Sun's Access Manager tool (part of the Identity Management suite).
In particular, I would like to know what access control tasks were performed through access manager, and which were performed portal-side.
Any information would be appreciated.
Thanks!

Hi
Has any one explored the below question.
Is WLP 9.2 compatible with Sun Access Manager?
If yes, please let know the details.
Thanks

Securing web services with Sun Access Manager

Hi!
I have gone through some documentation about Sun Access Manager, and I'm a little bit confused.
What I want is to secure some web services which are deployed on a BEA WebLogic 9.1 server (WLS). Two solutions are possible: To install some kind of plugin into WLS or to place some kind of proxy in front of WLS. In both cases, the purpose would be to authenticate the caller based on some kind of ticket (SAML or similar) and authorize access to the web service.
I have read about the "Sun Java System Access Manager Policy Agent 2.2 for Weblogic 9.1" (those guys really like long names....), but in this documentation web services aren't mentioned at all. They only seem to care about HTTP requests from a browser.
I have also read about the Policy Agent 2.2 in the documentation called "Sun Java System Access Manager Policy Agent 2.2 Guide for Sun Java System Application Server 9.0/Web Services" (puh...). This document explicitly talks about securing web services the way I want.
My questions are:
1) Is it possible to secure WLS based web services in the same way using the Policy Agent for WLS?
2) Are there any documentation/tutorials/etc?
Thanks in advance :-)
Anders

what you need is a webservices agent that would enable you to "protect" your webservice provider, which I assume is on a BEA weblogic provider.
the "Sun Java System Access Manager Policy Agent 2.2 for Weblogic 9.1" is "NOT" awebservices agent, but a normal J2EE policy agent.
So.. having said that. here's what I'd recommend.
1. install the webservices agent on bea weblogic. (note: NOT the J2EE policy agent)
2. configure it to use your access manager instance for authentication.
3. configure your webservices client to use the webservice provider. (note: you'd need the webservices APi's available on the client too... so the quick dirty method would be to install the webservices agent on your client too....) you can later bundle the webservices client independently and provide your"customers" with a webservices client bundle...
4. voila... your webservices are not "protected" by acces manager ;-)

Policy Agent doesn't reset Sun Access Manager session time idle value

Hi,
We have the following setup in our environment:
- apache web server/web and policy agent 2.2 for apache 2.0.54
- webmethods portal server (jetty)
-Sun Access Manager (with Sun Directory Server)
We use policy agent for authentication purpose only (via Sun Access Manager/LDAP) when the users access the portal. We have custom code that creates session in Sun Access Manager for custom LDAP services. For testing purpose, we configure SAM session to have Max Session Timeout at 120mins and Time Idle at 15mins. I would assume that, after the initial login request, for all subsequent accesses to the portal the policy agent should intercept the request and reset the Time Idle value of SAM session. However, when I monitor time idle value using SAM console, session tab, the time idle value didn't change when the portal user access pages, submit actions, etc. I can see in the debug log of policy agent that requests are being intercepted/processed, but the time idle didn't get reset.
Does anyone know if this is a bug in configuration or in policy agent itself or am I making the wrong assumption?
Thanks a lot for the help.

Thanks for the reply, Shivaram. The issue appears to occur at random time, not accurately at the 3 min interval as you mention. I tested changing this value to 1, theoretically, after one 1 minute of idle time, accessing a link would make the agent reset the time idle value for the user session in SAM, but it didn't even after 3 minutes. This seems to be either a policy agent or system access manager bug.
We performed a 'vanilla' test using the apache server manual pages (only plain HTML, no POST requests), the pages are protected by the policy agent. At the first login, rwe were prompted to enter credential to be validated by SAM/LDAP, and then a user session is created in SAM session table. We browse around the manual pages, once in a while, certain pages cause the policy agent to reset the time idle. However, revisiting these links after a few minutes doesn't reset the idle value. Caching setting has been disable as well. Could there be or lack of some settings in AMConfig.properties or AMAgent.properties that might have caused this behavior?
Thanks for all your help,

Sun Access Manager Event Sequence

I have a third party black box piece of hardware that is redirecting browser requests to my server for authentication. I want to utilize the Sun Access Manager to perform these authentications. Do I need to use the Policy Agent, or should I attempt to communicate directly with the Access Manager? What benefit will I gain from including the Policy Agent into the mix?
If I don't use the policy agent, here is the sequence of events as I understand them:
1) Browser hits Black Box (BB) for protected information.
2) BB redirects the browser to me.
3) Browser sends me a SAML snippet. I decode and inflate the snippet, then send it off to the access manager (AM).
4) The AM throws an invalid id exception because the user has never logged in.
5) I catch the invalid id exception, and redirect the browser to the AM login URL. The user enters a valid id and password and hits submit.
6) ... ?
Is this correct up to step 5, and what happens after step 5? Any hints would be greatly appreciated.

Okay, never mind then.

Sun Access Manager login problem

Hi,
This is a very basic problem. I have installed Sun Access Manager 7 using JES installer. It is configured to authenticate against a LDAP datastore. I am able to login into the amconsole application using the amAdmin DN but I am not able to login with any other user that I create through Sun Access Manager.Any help will be highly appreciated.
TIA.

Hello,
When you create any user through SUN Access Manager, is that user is created in LDAP
datastore, or is it created in SAM flat file repository ?

Integrate IdM roles with Sun Access Manager roles

Hi all,
I am currently working on a solution involving Sun Identity Manager 7.1 and Sun Access Manager 7.1 as well. We use AM for overall authentication and SSO across the application, and IdM for user provisioning.
I need to create roles in Identity Manager, and I would like that when I assign a role to a user in Identity Manager, he gets the same role in my Access Manager repository (Sun LDAP). Identity Manager does provide a way to set attribute values in resources when a role is set. Access Manager on the other hand has both dynamic roles, based on an LDAP search, and static roles.
What are the important differences between static and dynamic roles in AM?
Does anybody know a good way to propagate roles from Identity Manager to Access Manager?
Thanks.

I found answers to my question. I succeeded in setting the Access Manager role from Identity Manager using the nsRoleDN attribute. Here are some references to begin with:
About directory server roles:
http://docs.sun.com/app/docs/doc/820-2493/fvbrn?a=view
Forum thread reference:
http://forums.sun.com/thread.jspa?threadID=5208694
Here are roughly the steps I followed to get this working.
Access Manager roles setup:
1. In Access Manager, create a new static role named test_role under the identities realm (in Subjects > Role).
Identity Manager roles setup:
1. Create a new role in Identity Manager: tab Roles, click New....
2. Assign the LDAP resource to synchronize the role with.
3. On the Assigned Resources line, click the Set Attributes Values button. This shows up the attributes listing allowing you to bind your IdM role to your LDAP repository.
4. Set the attribute nsRoleDN to the LDAP DN of the role that was created in AM (nsRoleDN must be added in the resource attributes mapping before).
* In the column Value override, select Text.
* In the column How to set, select Authoritative merge with value, clear existing. (* See IDM Admin guide about this setting, I am still not sure how it reacts with multi-value attributes)
* In the text box, enter the role DN text (ex: cn=test_role,dc=com).
5. Save the role. You can now add the role to a user.

How to configura multiple ldap server to the sun access manager

Hi,
please help how to configure multiple ldap server to the sun access manager, for example access manager does't find the user in ldap1 then it should search in ldap2.
Thanks
Mouli

There�s no need for deleting the default amSDK based datastore because it�s needed for some default accounts.
You may try to create the datastore using the commandline (amadmin)
Have a look /etc/opt/SUNWam/config/xml/idRepoService.xml
You may also try to create amadmin account in the external ldap directory.
(Un)fortunately i�ve never tried to remove the default datastore.
-Bernhard

How to check amsilent file in Sun Access manager patch or redeploying WAR's

h1. How to check amsilent file in Sun Access manager patch or redeploying WAR's
I had a hard time getting all the passwords correct, so I wrote a shell (bash) script that uses most passwords and other parameters in searches and queries. It let's you know before you start if a value is wrong. It does not change anything, only queries.
h2. One pitfall I found ...
during the postinstall of patch 05. I told Sun about it, but I suspect it was too late and is also an issue with patch 06:
Look at the documentation regarding amconfig and the amsilent file:
http://docs.sun.com/app/docs/doc/819-2137/adsav?l=en&q=amconfig&a=view
Two problems that are clear to me now:
1. ADMINPASSWD in practice, this password is used for cn=puser, not amadmin as it says. Perhaps there is something that makes them the same. It was the same for me, so it probably does not matter.
2. AS81_ADMINPASSWD is not the same as ADMINPASSWD using either my definition or the document's definition. However, in the amsilent template, it is set like this, which I found is incorrect and the cause of my recent hair loss:
<blockquote>AS81_ADMINPASSWD="$ADMINPASSWD"</blockquote>
Also, this one if you use the web server:
<blockquote>WL8_PASSWORD="$ADMINPASSWD"</blockquote>
Delete the $ADMINPASSWD and replace it with the password for the app/web server.
h2. The Script.
It tests for the above problem, but I just realized it does not check $ADMINPASSWD. If that is set incorrectly in your amsilent, you'll get errors immediately from amconfig, so no big deal. If you make improvements, please post a reply!
Paste this into a file named checkamsilent. LDAP and appserver must be running. It reads /opt/SUNWam/amsilent. Run it as root or use sudo:
sudo ./checkamsilent
#!/usr/bin/bash
        echo "This will test several important parameters of the amsilent file "
        echo "run this as root."
        echo "### read in the amsilent parameters"
        echo "source /opt/SUNWam/amsilent "
source /opt/SUNWam/amsilent
        echo "### look for the *server port* with LISTNER, otherwise it's not listening. "
        echo "netstat -a | grep $SERVER_PORT    "
        echo "--------------"
netstat -a | grep $SERVER_PORT
        echo "--------------"
        echo "."
        echo "### *admin port* with LISTNER, otherwise it's not listening. "
        echo "netstat -a | grep $ADMIN_PORT   "
        echo "--------------"
netstat -a | grep $ADMIN_PORT
        echo "--------------"
        echo "."
        echo "### Expect to see a line of XML, otherwise the SERVER_PORT is incorrect in the amsilent file."
        echo "grep $SERVER_PORT ${AS81_INSTANCE_DIR}/config/domain.xml "
        echo "--------------"
grep $SERVER_PORT ${AS81_INSTANCE_DIR}/config/domain.xml
        echo "--------------"
        echo "."
        echo "### Expect to see a line of XML, otherwise the ADMIN_PORT is incorrect in the amsilent file."
        echo "grep $ADMIN_PORT ${AS81_INSTANCE_DIR}/config/domain.xml "
        echo "--------------"
grep $ADMIN_PORT ${AS81_INSTANCE_DIR}/config/domain.xml
        echo "--------------"
        echo "."
        echo "### bind as the directory manager "
        echo "ldapsearch -v -h $DS_HOST -p 3892 -L -s sub -D \"$DS_DIRMGRDN\" -w \"$DS_DIRMGRPASSWD\" -b 'dc=nsf, dc=gov' \"cn=amldapuser\""
ldapsearch -v -h $DS_HOST -p 3892 -L -s sub -D "$DS_DIRMGRDN" -w "$DS_DIRMGRPASSWD" -b 'dc=nsf, dc=gov' "cn=amldapuser"
        echo "."
        echo "### check the amldapuser password. "
        echo "ldapsearch -w $AMLDAPUSERPASSWD -v -h $DS_HOST -p 3892 -L -s sub -D cn=amldapuser,ou=DSAME Users,dc=nsf,dc=gov -b ou=DSAME Users,dc=nsf,dc=gov cn=* cn "
ldapsearch -w "$AMLDAPUSERPASSWD" -v -h $DS_HOST -p 3892 -L -s sub -D "cn=amldapuser,ou=DSAME Users,dc=nsf,dc=gov" -b "ou=DSAME Users,dc=nsf,dc=gov" cn=* cn
        echo "."
        echo "### check the app server admin: AS81_ADMIN password: AS81_ADMINPASSWD and port: ADMIN_PORT "
     echo "### That's actually a bug in the template. "
     echo "### Do not use AS81_ADMINPASSWD=\$ADMINPASSWD Make sure they are different passwords! Don\'t use the default!"
     echo "Expect to see a WARNING about --password option. "
        echo "/opt/SUNWappserver/appserver/bin/asadmin list-http-listeners --user $AS81_ADMIN --port $ADMIN_PORT -w $AS81_ADMINPASSWD "
/opt/SUNWappserver/appserver/bin/asadmin list-http-listeners --user $AS81_ADMIN --port $ADMIN_PORT -w "$AS81_ADMINPASSWD"
        echo "done!"

I change the product machine from LG optimus to Samsung Galaxy but the file writing is not working, too.
I copied the source code from Adobe website about FileStream but it is needless too.
-----------------program code------------------------
import flash.filesystem.*;
import flash.filesystem.FileStream;
import flash.events.Event;
//txtFld is a standard textField component
txtFld.text = "Start";var file:File = new File();
//btnSaveFile is a standard button component
btnSaveFile.addEventListener(MouseEvent.CLICK,handlerBtnSaveFile);
function handlerBtnSaveFile(e:Event){
txtFld.text = "Pressed";
file = File.documentsDirectory;
file = file.resolvePath("test.txt");
var fileStream:FileStream = new FileStream();
fileStream.openAsync(file, FileMode.WRITE);
fileStream.writeUTFBytes("Hello");
txtFld.text = file.nativePath.toString();
//fileStream.addEventListener(Event.CLOSE, fileClosed);
fileStream.close();
fcnFileName();
function fcnFileName(){
txtFld.text = file.name.toString();
function fileClosed(event:Event):void {
    trace("closed");
txtFld.text = "FileClosed";

Enabling guest/anonymous user accesss using sun access manager(opensso 8.0)

Similar Messages

Maybe you are looking for