Enabling job_queue_processes
I tried to enable 'job_queue_processes' with a value of 2 in my init<SID>.ora but even after doing this and restarting the whole Oracle system, Discoverer Plus still says that 'job_queue_processes' is set to 0. Running Discoverer 10gR2 with Database 9.2.02.
It seems that your Database is not using the same init<SID>.ora file you modified, it might be using spfile. If you have DBA privileges you can solve this issue by using "ALTER SYSTEM..." command to set 'job_queue_processes' .
Similar Messages
-
HI There
I have recently configure Data guard with Database 10g (10.2.0.4-64 bits) on Windows 2007 server.
My Data Gurad Configuration show Success status with 2 databases on same (or local) location.
My questions are
1-When I query SHOW PARAMETER LOG ARCH
DG_CONFIG(PRMDB)
ONLY 1 (PRIMARY DATABASE IS DISPLAYED ONLY NOT 2 DTATABASES
e.g. DG_CONFIG(PRMDB, STLDB)
2- How to check the log applied interval or time (either transaction by transaction, timing etc)
Kind Regards
Thunder2777THANKS FOR REPLY
BOTH TNSNAMES.ORA AND LISTENER.ORA IN SAME DIRECTORY
C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN
TNSNAMES.ORA
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
PRMDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CV-SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = PRMDB)
STLDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = CV-SERVER)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = STLDB)
LISTENER.ORA
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = STLDB)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
# PRIMARY DATABASE SPFILE
SPFILEPRMDB.ORA
prmdb.__db_cache_size=922746880
prmdb.__java_pool_size=16777216
prmdb.__large_pool_size=16777216
prmdb.__shared_pool_size=285212672
prmdb.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\PRMDB\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\bdump'
*.compatible='10.2.0.3.0'
*.control_files='C:\oracle\product\10.2.0\oradata\PRMDB\control01.ctl','C:\oracle\product\10.2.0\oradata\PRMDB\control02.ctl','C:\oracle\product\10.2.0\oradata\PRMDB\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='PRMDB'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dg_broker_start=TRUE
*.dispatchers='(PROTOCOL=TCP) (SERVICE=PRMDBXDB)'
*.job_queue_processes=10
*.log_archive_config='dg_config=(stldb)'
*.log_archive_dest_1='service="(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=CV-SERVER)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=stldb_XPT)(INSTANCE_NAME=stldb)(SERVER=dedicated)))"',' LGWR ASYNC NOAFFIRM delay=0 OPTIONAL max_failure=0 max_connections=1 reopen=300 db_unique_name="stldb" register net_timeout=180 valid_for=(online_logfile,primary_role)'
*.log_archive_dest_state_1='ENABLE'
prmdb.log_archive_format='ARC%S_%R.%T'
*.log_archive_max_processes=2
*.log_archive_min_succeed_dest=1
prmdb.log_archive_trace=0
*.open_cursors=300
*.pga_aggregate_target=417333248
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1253048320
prmdb.standby_archive_dest=''
*.standby_file_management='MANUAL'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\PRMDB\udump'
# STANDBY DATABASE INITSTLDB
INITSTLDB.ORA
STLDB.__db_cache_size=922746880
STLDB.__java_pool_size=16777216
STLDB.__large_pool_size=16777216
STLDB.__shared_pool_size=285212672
STLDB.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\STLDB\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\bdump'
*.compatible='10.2.0.3.0'
*.control_files='D:\ORACLE\ORADATA\STLDB\CONTROLFILE\control01.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='PRMDB'
*.db_unique_name='STLDB'
*.db_recovery_file_dest='D:\oracle\FRA'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=STLDBXDB)'
*.LOG_ARCHIVE_DEST_1='LOCATION=USE_DB_RECOVERY_FILE_DEST
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=STLDB'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=417333248
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1253048320
*.undo_management='MANUAL'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\STLDB\udump'
THANKS -
Oracle instance crashing when enabling use_indirect_data_buffers=true
I have a Windows 2003 EE server (32bit) with 16GB of ram hosting a 10.2.0.2 Oracle server which is used to support a commercial software package (arcsight). I'm trying to get the Oracle backend to leverage the available system memory. I've read 50-60 different articles and posts regarding AWE and Oracle. I have successfully tuned the userva parameter in order to get the server to boot stable with the /3gb boot parameter. I've gotten to the point that the oracle instance will start up, but within about 30-60 seconds the instance will crash. Below is the information I believe that is relevant:
*.......From computer Registry.........*
AWE_MEMORY_WINDOW = 1288486912
ORA_WORKINGSETMIN = 2
*...........From init.ora.............*
*.__dg_broker_service_names=';'
arcsight.__java_pool_size=0
arcsight.__large_pool_size=0
arcsight.__shared_pool_size=314572800
arcsight.__streams_pool_size=0
*.audit_file_dest='E:\oracle10g\OraHome10g\admin\arcsight\adump'
*.audit_sys_operations=true
*.audit_trail='db'
*.background_dump_dest='E:\oracle10g\OraHome10g\admin\arcsight\bdump'
*.compatible='10.2.0.1.0'
*.control_files='E:\oracle10g\OraHome10g\oradata\arcsight\control01.ctl','f:\arcsight\control02.ctl','g:\arcsight\control03.ctl'
*.core_dump_dest='E:\oracle10g\OraHome10g\admin\arcsight\cdump'
*.cursor_sharing='FORCE'
**.db_block_size=16384*
**.db_block_buffers=235929*
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_files=2000
*.db_name='arcsight'
*.db_writer_processes=4
*.dispatchers=''
*.job_queue_processes=10
*.log_archive_dest_1='LOCATION=H:'
*.log_buffer=1048576
*.open_cursors=2000
*.parallel_max_servers=0
*.pga_aggregate_target=314572800
*.processes=300
*.recyclebin='OFF'
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=0
*.undo_management='AUTO'
*.undo_retention=43200
*.undo_tablespace='ARC_UNDO'
*.user_dump_dest='E:\oracle10g\OraHome10g\admin\arcsight\udump'
*.java_pool_size=0
*.large_pool_size=0
*.shared_pool_size=314572800
*.streams_pool_size=0
**.use_indirect_data_buffers=true*
*......From oradim.log.......*
Sun Feb 22 18:37:33 2009
E:\oracle10g\OraHome10g\bin\oradim.exe -shutdown -sid arcsight -usrpwd * -shutmode immediate -log oradim.log
Sun Feb 22 18:37:34 2009
ORA-01012: not logged on
Sun Feb 22 18:37:45 2009
E:\oracle10g\OraHome10g\bin\oradim.exe -startup -sid arcsight -usrpwd * -log oradim.log -nocheck 0
Sun Feb 22 18:37:51 2009
ORA-03113: end-of-file on communication channel
*.......From alert_arcsight.log.........*
Dump file e:\oracle10g\orahome10g\admin\arcsight\bdump\alert_arcsight.log
Sun Feb 22 23:20:51 2009
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:14554M/16215M, Ph+PgF:14862M/15967M, VA:1926M/2047M
Sun Feb 22 23:20:51 2009
Starting ORACLE instance (normal)
Sun Feb 22 23:20:52 2009
Window memory size 1288503296
Sun Feb 22 23:20:52 2009
Minimum working set window size : 4096
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is enabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
use_indirect_data_buffers= TRUE
__shared_pool_size = 318767104
shared_pool_size = 318767104
__large_pool_size = 0
large_pool_size = 0
__java_pool_size = 0
java_pool_size = 0
__streams_pool_size = 0
streams_pool_size = 0
sga_target = 0
control_files = E:\ORACLE10G\ORAHOME10G\ORADATA\ARCSIGHT\CONTROL01.CTL, F:\ARCSIGHT\CONTROL02.CTL, G:\ARCSIGHT\CONTROL03.CTL
db_block_buffers = 235932
db_block_size = 16384
db_writer_processes = 4
compatible = 10.2.0.1.0
log_archive_dest_1 = LOCATION=H:
log_buffer = 2097152
db_files = 2000
db_file_multiblock_read_count= 16
undo_management = AUTO
undo_tablespace = ARC_UNDO
undo_retention = 43200
recyclebin = OFF
remote_login_passwordfile= EXCLUSIVE
audit_sys_operations = TRUE
db_domain =
__dg_broker_service_names= ;
dispatchers =
job_queue_processes = 10
cursor_sharing = FORCE
parallel_max_servers = 0
audit_file_dest = E:\ORACLE10G\ORAHOME10G\ADMIN\ARCSIGHT\ADUMP
background_dump_dest = E:\ORACLE10G\ORAHOME10G\ADMIN\ARCSIGHT\BDUMP
user_dump_dest = E:\ORACLE10G\ORAHOME10G\ADMIN\ARCSIGHT\UDUMP
core_dump_dest = E:\ORACLE10G\ORAHOME10G\ADMIN\ARCSIGHT\CDUMP
audit_trail = DB
db_name = arcsight
open_cursors = 2000
pga_aggregate_target = 314572800
PMON started with pid=2, OS id=6676
PSP0 started with pid=6, OS id=7544
MMAN started with pid=10, OS id=7560
DBW0 started with pid=14, OS id=6500
DBW1 started with pid=18, OS id=6800
DBW2 started with pid=22, OS id=6276
DBW3 started with pid=26, OS id=520
LGWR started with pid=30, OS id=6756
CKPT started with pid=34, OS id=6380
SMON started with pid=38, OS id=7472
RECO started with pid=42, OS id=7696
CJQ0 started with pid=46, OS id=7912
MMON started with pid=50, OS id=7576
MMNL started with pid=54, OS id=6852
Sun Feb 22 23:20:53 2009
alter database mount exclusive
Sun Feb 22 23:20:57 2009
Setting recovery target incarnation to 1
Sun Feb 22 23:20:57 2009
Successful mount of redo thread 1, with mount id 1799551061
Sun Feb 22 23:20:57 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Sun Feb 22 23:20:57 2009
alter database open
Sun Feb 22 23:20:58 2009
Beginning crash recovery of 1 threads
parallel recovery setup failed: using serial mode
Sun Feb 22 23:20:58 2009
Started redo scan
Sun Feb 22 23:20:58 2009
Completed redo scan
0 redo blocks read, 0 data blocks need recovery
Sun Feb 22 23:20:58 2009
Started redo application at
Thread 1: logseq 1137, block 3, scn 1707289029
Sun Feb 22 23:20:58 2009
Recovery of Online Redo Log: Thread 1 Group 5 Seq 1137 Reading mem 0
Mem# 0: I:\ARCSIGHT\REDO\REDO5.LOG
Mem# 1: I:\ARCSIGHT\REDO\REDO05B.LOG
Sun Feb 22 23:20:58 2009
Completed redo application
Sun Feb 22 23:20:58 2009
Completed crash recovery at
Thread 1: logseq 1137, block 3, scn 1707309030
0 data blocks read, 0 data blocks written, 0 redo blocks read
Sun Feb 22 23:20:59 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=62, OS id=6972
Sun Feb 22 23:20:59 2009
ARC0: Archival started
ARC1 started with pid=66, OS id=6640
Sun Feb 22 23:20:59 2009
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
Thread 1 advanced to log sequence 1138
Thread 1 opened at log sequence 1138
Current log# 4 seq# 1138 mem# 0: G:\ARCSIGHT\REDO\REDO4.LOG
Current log# 4 seq# 1138 mem# 1: G:\ARCSIGHT\REDO\REDO04B.LOG
Successful open of redo thread 1
Sun Feb 22 23:21:00 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Sun Feb 22 23:21:00 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Sun Feb 22 23:21:00 2009
ARC1: Becoming the heartbeat ARCH
Sun Feb 22 23:21:00 2009
SMON: enabling cache recovery
Sun Feb 22 23:21:02 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_pmon_6676.trc:
ORA-27103: internal error
OSD-00028: additional error information
Sun Feb 22 23:21:02 2009
PMON: terminating instance due to error 27103
Sun Feb 22 23:21:02 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_reco_7696.trc:
ORA-27103: internal error
Sun Feb 22 23:21:02 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_smon_7472.trc:
ORA-27103: internal error
Sun Feb 22 23:21:02 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_ckpt_6380.trc:
ORA-27103: internal error
Sun Feb 22 23:21:02 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_lgwr_6756.trc:
ORA-27103: internal error
Sun Feb 22 23:21:03 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_dbw3_520.trc:
ORA-27103: internal error
Sun Feb 22 23:21:03 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_dbw2_6276.trc:
ORA-27103: internal error
Sun Feb 22 23:21:03 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_dbw1_6800.trc:
ORA-27103: internal error
Sun Feb 22 23:21:03 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_dbw0_6500.trc:
ORA-27103: internal error
Sun Feb 22 23:21:03 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_mman_7560.trc:
ORA-27103: internal error
Sun Feb 22 23:21:04 2009
Errors in file e:\oracle10g\orahome10g\admin\arcsight\bdump\arcsight_psp0_7544.trc:
ORA-27103: internal error
Instance terminated by PMON, pid = 6676
I appreciate any input on what to look at to further isolate this issue. I'd run into many other issues along the way (setting AWE_WINDOW_MEMORY to a proper size, setting db_block_buffers to a proper value, etc) that various forum searches helped resolve but I've not been able to find anything related to the errors I'm getting now. If I set use_indirect_data_buffers=false and tune back the db_block_buffers, the instance starts without any problems. Its just when I try and enable the use of AWE that I'm having a problem.
NickJust wanted to close out this tread in case anyone else runs into a similar problem. Turns out we ran into a bug documented in the below linked article (we're using AMD processors). Essentially needed to disable NUMA.
http://blog.csdn.net/orapeasant/archive/2007/06/05/1639532.aspx
excerpt ....
But please be aware of Bug 4494543 - affecting 10g and fixed in Oracle 11.0 ......
ORA-7445: CORE DUMP [ACCESS_VIOLATION] WITH USE_INDIRECT_DATA_BUFFERS=TRUE
Rediscovery Information:
1) Using 32-Bit Oracle on a 32-Bit Windows 2003 server running on an AMD Opteron 64-Bit chip.
2) You have set use_indirect_data_buffers=true in init.ora
Workaround: Basically disable NUMA feature on 32-Bit platform :-
1) Set ENABLENUMA = FALSE in Windows registry for the Oracle Home.
2) Set enableNUMA_optimizations = FALSE (init.ora)
Thanks for the help. We'll see if access to the extra memory will be useful or not .....
Nick -
Error while enabling Archivelog mode
There occurs an error while performing startup mount for enabling archive log mode in Windows.
Below are the steps followed:
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 20 16:49:14 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> disconnect;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> connect sys@epm11 as sysdba;
Enter password: ********
Connected.
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination D:\oracle\product\10.2.0\flash_recovery_area
Oldest online log sequence 9
Current log sequence 11
SQL> show parameter recovery_file_dest;
NAME TYPE VALUE
db_recovery_file_dest string D:\oracle\product\10.2.0/flash
recoveryarea
db_recovery_file_dest_size big integer 2G
SQL> alter system set log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area' sco
pe=spfile;
System altered.
SQL> show parameter log_archive_dest_1;
NAME TYPE VALUE
log_archive_dest_1 string location=D:\oracle\product\10.
2.0\flash_recovery_area
log_archive_dest_10 string
SQL> alter system set log_archive_start=true scope=spfile;
System altered.
SQL> show parameter LOG_ARCHIVE_START;
NAME TYPE VALUE
log_archive_start boolean TRUE
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
Oracle version information is
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 – Production
Please let me know how to resolve this error.
Regards
Swathi.Hi,
Add archive log_archive_dest_1 D:\oracle\product\10.2.0\flash_recovery_area in pfile and then try to start the database.
Also check alert_log for more information.
Added the below info in pfile
log_archive_dest_1='location=D:\oracle\product\10.2.0\flash_recovery_area'
log_archive_start=TRUE
and then performed the process but the same error is giving.
SQL> startup mount;
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
And i have checked the alert log which is at location D:\oracle\product\10.2.0\admin\EPM11\bdump
Below information is displayed in the alert log:
Tue Dec 21 12:07:15 2010
Starting background process EMN0
EMN0 started with pid=19, OS id=7500
Tue Dec 21 12:07:15 2010
Shutting down instance: further logons disabled
Tue Dec 21 12:07:15 2010
Stopping background process QMNC
Tue Dec 21 12:07:16 2010
Stopping background process CJQ0
Tue Dec 21 12:07:17 2010
Stopping background process MMNL
Tue Dec 21 12:07:18 2010
Stopping background process MMON
Tue Dec 21 12:07:19 2010
Shutting down instance (immediate)
License high water mark = 16
Tue Dec 21 12:07:19 2010
Stopping Job queue slave processes
Tue Dec 21 12:07:19 2010
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Tue Dec 21 12:07:27 2010
ALTER DATABASE CLOSE NORMAL
Tue Dec 21 12:07:28 2010
SMON: disabling tx recovery
SMON: disabling cache recovery
Tue Dec 21 12:07:28 2010
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 12
Successful close of redo thread 1
Tue Dec 21 12:07:29 2010
Completed: ALTER DATABASE CLOSE NORMAL
Tue Dec 21 12:07:29 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Dump file d:\oracle\product\10.2.0/admin/epm11/bdump\alert_epm11.log
Tue Dec 21 12:20:46 2010
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1439M/3062M, Ph+PgF:5441M/6994M, VA:1940M/2047M
Tue Dec 21 12:20:46 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
__shared_pool_size = 201326592
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = D:\ORACLE\PRODUCT\10.2.0\DB_1\DBS\SPFILEEPM11.ORA
sga_target = 612368384
control_files = D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL01.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL02.CTL, D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\CONTROL03.CTL
db_block_size = 8192
__db_cache_size = 394264576
compatible = 10.2.0.1.0
log_archive_start = TRUE
log_archive_dest_1 = location=D:\oracle\product\10.2.0\flash_recovery_area
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oracle\product\10.2.0/flash_recovery_area
db_recovery_file_dest_size= 2147483648
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=EPM11XDB)
job_queue_processes = 10
audit_file_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\ADUMP
background_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\BDUMP
user_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\UDUMP
core_dump_dest = D:\ORACLE\PRODUCT\10.2.0\ADMIN\EPM11\CDUMP
db_name = EPM11
open_cursors = 300
pga_aggregate_target = 203423744
Deprecated system parameters with specified values:
log_archive_start
End of deprecated system parameter listing
PMON started with pid=2, OS id=1188
PSP0 started with pid=3, OS id=5800
MMAN started with pid=4, OS id=6212
DBW0 started with pid=5, OS id=3920
LGWR started with pid=6, OS id=496
CKPT started with pid=7, OS id=5008
SMON started with pid=8, OS id=692
RECO started with pid=9, OS id=2924
CJQ0 started with pid=10, OS id=1840
MMON started with pid=11, OS id=5520
MMNL started with pid=12, OS id=5212
Tue Dec 21 12:20:47 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 1 shared server(s) ...
Tue Dec 21 12:20:47 2010
alter database mount exclusive
Tue Dec 21 12:20:51 2010
Setting recovery target incarnation to 2
Tue Dec 21 12:20:51 2010
Successful mount of redo thread 1, with mount id 3057552735
Tue Dec 21 12:20:51 2010
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Tue Dec 21 12:20:51 2010
alter database open
Tue Dec 21 12:20:51 2010
Thread 1 opened at log sequence 12
Current log# 2 seq# 12 mem# 0: D:\ORACLE\PRODUCT\10.2.0\ORADATA\EPM11\REDO02.LOG
Successful open of redo thread 1
Tue Dec 21 12:20:51 2010
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Tue Dec 21 12:20:52 2010
SMON: enabling cache recovery
Tue Dec 21 12:20:52 2010
Successfully onlined Undo Tablespace 1.
Tue Dec 21 12:20:52 2010
SMON: enabling tx recovery
Tue Dec 21 12:20:52 2010
Database Characterset is WE8MSWIN1252
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=16, OS id=6268
Tue Dec 21 12:21:00 2010
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Tue Dec 21 12:21:00 2010
Completed: alter database open
Please provide me solution.
Regards
Swathi. -
Job_queue_processes
Hi friends
I have a BD that it has created several jobs, 5 of which they execute themselves to 1:00am and the parameter job_queue_processes is 1. I see in DBA_JOBS view and apparently executes all jobs without problems and in simultaneous form.
i dont understand that because i read in another web page that for my case, for example, the parameter must have a value greater to 5, than are jobs that is executed in simultaneous.
Anyone can explain me?
...and i read the oracle documentation about that, that is the reason for my question.
thanks in advance.
CesarHi Cesar,
Can Anyone can explain me? Probably not, but I'll try!
Me, I just set it to a large-enough value and leave it be . . .
Dr. Hall has these notes on setting job_queue_processes from his book "Oracle Job Scheduling":
http://www.remote-dba.cc/t_jobscheduling_18_Oracle9i_scheduler_.htm
the job_queue_processes parameter sets an upper limit for the number of job slaves that can be spawned to execute jobs. The value assigned must be between 0-1000; with zero being the default.
The job coordinator spawns as many job slaves (j000 to j999) as are needed to execute the outstanding jobs, making the job_queue_processes parameter redundant in Oracle 10g. A job slave gathers metadata from the scheduler tables to enable it to execute a job. Upon completion of a job, the slave process updates any relevant information in the job table, inserts data into the job run history and requests another job from the job coordinator. If a job is not available, the job slave sleeps until there is work to do. The job coordinator periodically terminates idle job slaves to reduce the slave pool.
Hope this helps. . .
Don Burleson
Oracle Press author
Author of “Oracle Tuning: The Definitive Reference”
http://www.dba-oracle.com/bp/s_oracle_tuning_book.htm -
Unable to enable archivelog mode and flashback mode
Hi,
I have oracle10g installed on Linux machine.
Everytime i try to enable ARCHIVELOG mode and FLASHBACK through the DB EM console and during the restart of the database, the database just startup and gets mounted, but does not get open. and not able to get the database to archive log mode.
and when i startup the database through the sqlplus i get this following error:
ORA-32004: obsolete and/or deprecated parameter(s) specified
i am not able to enable successfully archive log mode and flashback mode.
in sqlplus i did the following and got the following:
SQL> archive log list;
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 13585
Current log sequence 13587
so i was thinking maybe it is the archive log start sequence that is creating error.
because long back i had the database in archive log mode and because the archive log files got filled up, i disabled the archive mode and had to delete the archive log files.
Can someone help me bring the database in archive log mode which i am not able to successfully execute.
Thanks in advance,
Philip.Hi,
yes i looked in to the init.ora file and i got this
orcl.__db_cache_size=1308622848
orcl.__java_pool_size=167772160
orcl.__large_pool_size=16777216
orcl.__shared_pool_size=167772160
orcl.__streams_pool_size=16777216
*.audit_file_dest='/home/oracle/oracle/admin/orcl/adump'
*.background_dump_dest='/home/oracle/oracle/admin/orcl/bdump'
*.compatible='10.2.0.1.0'
*.control_files='/u01/oradata/orcl/control01.ctl','/u01/oradata/orcl/control02.ctl','/u01/oradata/orcl/control03.ctl'
*.core_dump_dest='/home/oracle/oracle/admin/orcl/cdump'
*.db_block_size=8192
*.db_domain='mslabs.noaa.gov'
*.db_file_multiblock_read_count=16
*.db_name='orcl'
*.db_recovery_file_dest='/u02/flash_recovery_area'
*.db_recovery_file_dest_size=64424509440
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.java_pool_size=159383552
*.job_queue_processes=10
*.open_cursors=300
*.pga_aggregate_target=562036736
*.processes=150
*.log_archive_start=FALSE
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1687158784
*.shared_pool_size=157286400
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='/home/oracle/oracle/admin/orcl/udump'
and there is a
*.log_archive_start=false
so do i have to delete it?
Thanks,
Philip. -
Not null and enable or disable column in tabular form
Hi,
Using apex version 4.1 and working on tabular form.
ACT_COA_SEGMENT_MAS is Master table
and
ACT_SEGMENT_VALUES_MAS is detail table
I have entered 8 rows in master table and PARENT_SEGMENT_ID is column in master table which is null able. If i specified PARENT_SEGMENT_ID with value in master table then in detail table there is column PARENT_ID that should not be null and enable.
How i can enable or disable column when in master table PARENT_SEGMENT_ID column is null then in detail table PARENT_ID column should disable and vice versa.
I have created tabular form on Detail table. before insert into the tabular form Check in master table in first entry if PARENT_SEGMENT_ID is not null in first row of master table then in tabular form PARENT_ID should enable and not null able in corresponding to this first row id's lines in tabular form.
Same should check for second row in master table if PARENT_SEGMENT_ID is not null then entered rows with PARENT_ID into tabular form corresponding to 2nd id in master table should not nullable and column should enable in tabular form.
Thanks & Regards
Vedant
Edited by: Vedant on Jan 9, 2013 9:12 PMVedant,
You need to create you own manual tabular form and not use the wizard.
Using APEX_ITEM api you should be build you own form and you will be able to control how you wan to display the rows. (See Link [Apex Item Help|http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CACEEEJE] )
select case when PRIMARY_TABLE_COLUMN is null then APEX_ITEM.DISPLAY_AND_SAVE(3 , DETAIL_COLUMN ) else APEX_ITEM.TEXT(2,detail_column) end "ALIAS" from detail table
Hope that help.
Vivek -
"Enable Swipe" don't work and Tablet Layout on a Smartphone
Hi there,
I have two big problems with my own site www.mhgrafikdesign.de:
1. I have different slideshows in my tablet version of my site. I created the slideshow before one of the updates with the feature "Enable swipe" came out. However, it worked well on my Samsung Galaxy Tab 10.1n. Now I have a Microsoft Surface and it's not working anymore although "Enable Swipe" is enabled. I don't know if the Microsoft Surface has problems with the slideshow or one of the updates has "damaged" my slideshow. Please help me! Any ideas?
2. I have a HTC 8S smartphone and if I type www.mhgrafikdesign.de my smartphone always show me the tablet version. Any idea why? P.S. Swiping there is also not possible.
Many thanks for quick help. My website is my flagship in the web and it's a little bit embarrassing if my slideshow on the tab don't work... = /This is now a slideshow created with Muse: Homepage
The slideshow uses fullscreen mode and was build with the latest version of Muse. On my Win8-Tablet, it is not working. I tested this with the IE11 in desktop- and in modern-ui-mode.
Next to this problem, I also run into these things:
1. Using the buttons to go forward and backward in the slideshow will select the text-arrow inside the button when touched.
2. Clicking the forward- and backward-button behaves different. Windows Desktop -> slideshow does not roll back, so you can click forever in one direction, no feedback that you reached the end. On iOS -> slideshow will be rolled back and you get the visual feedback to start over again.
3. Zoom into the fullscreen-slideshow will result in strange and not really controllabel behaviour. Zooming in does not allow to pan.
But I am not talking only about the phones. It is more about windows tablets in general. So, content can be viewed in the InternetExplorer11 in desktop-mode and also in modern-UI-mode (touch does work in both modes). But it is also possible, that people use other browsers like Firefox and Chrome. I think, it would be a quite a good idea to translate the movement of the mousepointer into gestures. This javascript library shows what I think is a good aproach: Hammer.JS - Hammer.js -
How do I enable the macbook pro trackpad pinch open and close feature in Firefox?
TYPE OF SYSTEM: Macbook Pro, OSX V 10.5.8
My pinch and zoom function works fine with Safari. Is there a way to enable this feature in Firefox?You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
* browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
* browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
* browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
* browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
* browser.gesture.pinch.latched -> <b>false</b>
*http://kb.mozillazine.org/about:config
See also:
*pinchy: https://addons.mozilla.org/firefox/addon/pinchy/ -
Adobe Flash & Javascript don't work even though Enabled
Ever since what I think was either a Firefox upgrade (I don't know which one) or installation of Quicktime, my Adobe Flash Plugin is perpetually crashed and I cannot play any Flash content on any website. All that displays in place of the video is a gray screen with the sad-face Lego icon and the message: “The Adobe Flash Plugin has crashed. Please reload the page to try again.” (See attached image.) But it will not resolve when reloaded.
No Flash videos on any sites work. HTML5 videos work on YouTube when tested, but non-HTML5 videos won't work.
Also, my Javascript does not seem to be working since at least some displays requiring javascript don't work. Sometimes the display just doesn't work, and sometimes I get a message that javascript is disabled and must be enabled, but it is already enabled (set to “true” in about:config).
I have spent days scouring every help forum entry I can find on troubleshooting Flash Player and Javascript. Everything on my end seems to be in order and I cannot find or fix either problem. I think it is possible the issue could have its roots in the fact that Javascript seems to not be working which may be preventing Flash Player content from working...??
Also, Flash content does work in I.E. but not in Firefox (I do not have Chrome installed so did not test in Chrome). I have too many window tabs open in Firefox and can't switch to I.E. (nor do I like to use I.E.).
PLEASE HELP as this is crippling for very important work deadlines I have.
This is what else I know and have tried:
I have a Toshiba Satellite C75D-A Laptop;
Processor: AMD A6-5200 APU with Radeon HD Graphics; x64; 2.00 Ghz;
RAM: 8 MB;
OS: 64-bit system; Windows 8.1 (but some auto-check utilities detect it as 8.0 because it was upgraded.);
Graphics Card: “Desktop Graphics” System – AMD Radeon HD 8400 (0x9830);
Installed Graphics Driver Version: AMD 13.352.1004.1007 (Driver Date: 4/22/2014)
My Device Manager graphics driver updater states: “driver software is up to date.”
From the AMD website: the graphics driver auto-detect utility recommended the AMD Catalyst Driver (amd-catalyst-omega-14.12-without-dotnet45-win8.1-64bit.exe) I tried installing this driver, but it won't install. After trying to install, I got a message stating: “We are unable to find a driver for your system.” But Device Manager states I have a current driver, and my graphics card & driver seem to be working fine, so I do not believe this is part of the issue.
I am using Latest Firefox version 35.0.1; and
Using Latest Flash Player: 32-bit NPAPI Plug-in Version: 16.0.0.296; designated: “always activate” (Downloaded new update several times, including fresh install after uninstall; system & web address icons indicate Flash is enabled).
I turned off hardware acceleration in FF Tools>Options>Advanced>General
I disabled WebGL as explained here: https://support.mozilla.org/en-US/kb/upgrade-graphics-drivers-use-hardware-acceleration
I am using Ad-Block Plus which has never affected things in the past. I have not tried starting FF in Safe Mode because I believe I will lose all open tabs and not be able to recover them (I may have over 200 open). But disabling add-ons has no effect (I disabled all except for Sessions Manager in case of a crash). (My No-Script has been disabled for at least six months.)
I have Windows Media Player and Quicktime installed.
Quicktime is most recent upgrade (7.7.6) so should not be a problem according to:
“QuickTime plugin takes over Flash” at:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here)
Disabling Quicktime had no effect in the prior version of FF (ver. 35.0), but in latest FF ver. 35.0.1, Flash videos only display a plain (blank) gray screen instead of the sad-faced icon and crash message.
(I tried to uninstall Quicktime altogether, but was not able to due to Error codes 2502 & 2503. I tried troubleshooting that as well with no luck using methods successful for other programs, including here:
http://www.fixkb.com/2014/01/error-2503-and-2502-when-uninstalling-on-windows-8.html;
& here:
http://answers.microsoft.com/en-us/windows/forum/windows_8-winapps/re-internal-error-codes-2502-and-2503-for/ba5f2145-aa6e-4cc0-81a7-e4346f43b698.)
Disabling my FF theme and using the default brought back the sad-faced icon and crash message in the place of videos on some YouTube pages, but not other YouTube pages (where video was still blank gray screen). It also enabled a still Flash image (an ad) to display on a different website page that previously had a Flash Plugin crash message. I have been using this same theme for a couple of years without previous issue. While turning it off did generate an effect on some still imagery, it didn't fix the video problem.
I tried Disabling Protected Mode in Flash 11.3 as explained here:
http://kb.mozillazine.org/Flash#Disabling_Protected_Mode_in_Flash_11.3
(note underscores in place of spaces in string; underscores not insertable here).
It did not solve the issue.
I also deleted all storage & data in Flash Player as advised. This had no effect either.
I've tried all solutions I've been able to find and am at a loss for what to try next. Please help and advise ASAP. Thank you!!''guigs2 [[#answer-684038|said]]''
<blockquote>
I truely admire the efforts that have been made to make this work.
"“We are unable to find a driver for your system.” "
For it not installing, you need to follow these instructions to install them: see the comments: [http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_devices/windows-10-atiamd-display-drivers/50944d10-dde3-4e08-8244-d54eb2b1e7de] --> take warning though it looks like it has caused issues for others as well.
Since it was working for some youtube videos and not others, there might be an issue with a particular video codec. DO you have OpenH264 Video Codec provided by Cisco Systems, Inc. plugin?
Is it possible to try Safe Mode after saving your session with [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager Addon]? IT would test hardware acceleration in Firefox.
</blockquote>
Thank you, guigs2! Sorry for my delayed reply...I didn't realize I hadn't gotten back to you. Update is that I did try a whole slew of other troubleshooting steps including starting FF in safe mode, to no avail. However, I was FINALLY (after months) able to solve this problem just today by pure chance!
The problem was that hardware acceleration was enabled in the Flash settings. I had not been able to turn it off because I didn't have access to the Flash Player settings as long as the crash error message was visible, which was all the time! Today, by a sheer fluke, I saw a static picture in place of the crash message on a Flash video. I snagged the opportunity to call up the settings and turn off hardware acceleration, and it fixed the problem for my whole browser! This has been a frustrating issue because I did not have access to the settings utility as long as I had the crash message, which was always, so my Flash was crippled without the ability for me to fix it until pure luck gave me this window of opportunity.
Does anyone know another way to access the settings utility if this ever happens again in the future? I could not find a way. (Incidentally, I had tried disabling hardware acceleration via my graphics driver settings, but it didn't fix the problem.) We need Adobe to allow some other way to access the Flash Player settings utility when this problem arises since they aren't accessible when there is a static crash message.
Thanks again! -
TS1368 How can I enable my iTunes Store account ?
I need to enable my iTunes Store account , how can I do that ?
You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on your iPad by tapping on your id in Settings > iTunes & App Stores and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Loop Playback enabled or disabled at a glance?
Can't find the way to understand at a glance if Loop Playback is enabled or disabled. Is it possible that FCPX lacks an option like this?
Yes. It's only visible in View>Playback. Use feedback to request it.
-
Unable to call WSS (WS-Security) enabled Web Service using UTL_DBWS
We are attempting to call a WSS (WS-Security) enabled Web Service from PL/SQL using the UTL_DBWS package (see [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_dbws.htm#CHDIDGJH] ). We are doing this in similar fashion to [http://www.oracle-base.com/articles/10g/utl_dbws10g.php] with calls to utl_dbws.create_service, utl_dbws.create_call and utl_dbws.invoke.
Using this method we can successfully call an unsecured Web Service, but calls to WSS-enabled Web Services fail. We are currently using Oracle Database 10.2.0.3.
The failure we are getting is:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPolicy(S) ): No Security Header found;nested
exception is com.sun.xml.wss.XWSSecurityException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPlicy(S) ): No Security Header found
Apparently UTL_DBWS does not support calling WSS enabled services, although this doesn't appear to be an officially recognised position. Does anyone know if Oracle are planning to support this soon (if ever)? Looking at Re: Calling WS from PL/SQL using WS-security suggests that support has been considered before, but not yet realised.
Thanks,
TomHaving raised a Service Request with Oracle support on this, I got the following response from Oracle Development (On unpublished bug [8542959|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=8542959]):
Development has confirmed that WS-Security is not supported through UTL_DBWS. They have also acknowledged that this is not documented and they will change the official Oracle documentation will reflect this fact. From what is being stated, it would appear that there is no plan to support the use of WS-Security through UTL_DBWS in any release in the near future.
So, in short, without developing your own home-grown SOAP request, there is no way to call a WSS enabled web service from within PL/SQL.
-Tom -
Error while Enabling a user in OIM
Hi,
I have a requirement where i need to disable and enable OIM users based on a UDF . If the UDF says Active user should be enabled and if it says "deleted" user should be disabled. I'm able to "Disable" a user present in "Active" state but not vice versa. My entity adapter is as follows
statusUpdate(String userKey,String Status){
OIMConnectionManagerImpl oimConn = new OIMConnectionManagerImpl();
tcUserOperationsIntf tcUser = oimConn.getUserAPI();
tcResultSet tcres = null;
HashMap map = new HashMap();
map.put("Users.Key",userKey);
tcres = tcUser.findUsers(map);
String s1=tcres.getStringValue("Users.Status");
if(Status.equalsIgnoreCase("Active") )
if(s1.equalsIgnoreCase("Disabled")){
tcUser.enableUser(Long.parseLong(userKey));
if(Status.equalsIgnoreCase("Deleted") )
if(s1.equalsIgnoreCase("Active")){
tcUser.disableUser(Long.parseLong(userKey));
My error is as follows
[com.oim.util.OIMConnectionManagerImpl] Unable to create factory instance
java.lang.NullPointerException
Edited by: user10665408 on Jul 1, 2009 3:14 PMI have done sm changes now:
Try this.
If some import is missing or some spelling mistakes are there just correct those. It's just for reference.
Put import for map also.
package com.Tst.oim;
import Thor.API.Operations.tcUserOperationsIntf;
import Thor.API.tcResultSet;
import Thor.API.tcUtilityFactory;
import com.thortech.xl.crypto.tcCryptoUtil;
import com.thortech.xl.crypto.tcSignatureMessage;
import com.thortech.xl.util.config.ConfigurationClient;
import java.util.Hashtable;
public class CreateFile {
tcUtilityFactory utilFactory = null;
tcSignatureMessage moSignature = null;
tcUserOperationsIntf moUserUtility = null;
tcResultSet userResultSet = null;
ConfigurationClient.ComplexSetting myConfig =
ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
final Hashtable env = myConfig.getAllSettings();
public void Enable(String userid) {
try {
System.out.println("TRY");
moSignature = tcCryptoUtil.sign("xelsysadm", "PrivateKey");
utilFactory = new tcUtilityFactory(env, moSignature);
moUserUtility = (tcuserOperations)utilfactory.getutility("Thor.API.Operations.tcUserOperations");
Map a = new HashMap();
a.put("Users.User ID", userid);
tcResultSet userset = moUserUtility.findAllUsers(a);
long ukey = userset.getLongValue("Users.Key");
moUserUtility.enableuser(ukey);
} catch (Exception e) {
e.printStackTrace();
Edited by: Dost -
I recently downloaded a new update of the operating system on my 3GS It seems to be a bit slower since and I have no idea if that is part of what is going wrong. I cannot get itunes to recognise my phone. Windows pops up a 'window' that says my 'mobile device services' is not working and would I like Windows to look online for the problem - I say yes, windows does it's thing, blanks out and I am back where I was. I tried updating itunes but no luck.
I found the mobiledeviceservices.exe file and made sure it was all 'on' and 'enabled' still no luck I did a search and came up with some other people who had the same problem but the answers that they were given didn't help me.When you erased the disk did you select Mac OS Extended Journaled as the format option?
Maybe you are looking for
-
Frequently, the server not responding at the logins of the users. It's not hanging but not responding. All the Oracle services is running and the Event Viewer not record any error or warning. I need to know if there are someone Oracle log where I can
-
How to extract register names & their addresses from .inc file of a microcontroller
Hi, I want to extract register names to a dropdown and their corresponding addresses from .inc file in such a way that when I select a register from dropdown, it has to also show its address in a string indicator. However, only a part of .inc file co
-
Mat**bleep​**a dvd-ram uj-850s 1.10
I have a satellite p105-s6177. It is about 2 yrs old, and the dvdrom drive has stopped working for the past 7 days. I cannot play music, watch a video or burn anything. I am getting a message "cannot find application". Can anyone help?
-
How do I access my old pics on a new device?
I just got a new iPhone5S and would like to know how to access my photos already on iCloud from my other devices.
-
Scheduling planned order of semi finished
Dear all, I have the following scenario finished product A is made of semi finished product B , when making a plan for A to be delivered say 1\6\2010 the system schedules a planned order for A to be delivered on 1\6\2010 at 7:00 AM and start on 25\6\