Enabling mail sendig only for authenticated users

Hi!
# /opt/sun/comms/messaging64/bin/imsimta version
Sun Java(tm) System Messaging Server 7u3-12.01 64bit (built Oct 15 2009)
libimta.so 7u3-12.01 64bit (built 08:27:26, Oct 15 2009)
Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
SunOS xxxxxx 5.10 Generic_142900-02 sun4u sparc SUNW,Sun-Fire-880How can be configured authentication on sending mail to local or outside? I've multiple domains on this server.
I already looked up this link, but without success: http://wikis.sun.com/display/CommSuite/How+to+Configure+Messaging+Server+to+Authenticate+on+Outbound+SMTP+Connections
Regards,
bzg

22-Dec-2009 14:46:04.14 797.3.0 tcp_local + O TCP|x.y.z.a|25|x.y.z.b|32796 SMTP
22-Dec-2009 14:46:04.15 797.3.1 tcp_intranet BE 0 rfc822; MAIL FROM:<[email protected]> SIZE=2024 mx.xxxx.xx ([unknown] [x.x.x.x]) 530 5.7.0 No AUTH command has been given.The process/thread/sequence (797.3.0 and 797.3.1), due to LOG_PROCESS=1, indicate the above are the same thread, working on the same connection.
The O record shows the address on the server end was x.y.z.a and the IP address of the client was x.y.z.b. The same client info should be in the B record as well.
The B record means "bad command". It was a bad command, as the message indicates, because authentication was required but not provided.
So what is x.y.z.b ?? If it is a client, configure that client to use SMTP auth. If it is another server, then perhaps it should not be included in the range of IP addresses in the INTERNAL_IP mapping table.
Please provide the URL of the page you referred to.

Similar Messages

On-Demand Process Running only for authenticated user

I have noticed that an on-demand process is running only for authenticated users - for example a download of a document. For public users it doesn't. I remember seeing a similar question related to ajax on demand in this forum but couldn't locate the thread. Does anyone knows why the process is not running for not authenticated user? The result of a download for a public user is a blank page where the authenticated user gets the file by clicking on the same link.
Thanks in advance,
Denes Kubicek
http://deneskubicek.blogspot.com/
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Hello Denes,
Please check if the following can help you -
Re: AJAX on public page
Re: Calling an application level on-demand process from JavaScript
Regards,
Arie.

Mail rules work for some users, don't work for others

Ready to pull my hair out over this one:
Leopard to Snow Leopard upgrade went uneventfully, except for the fact that server-side mail rules (accessed via browser at FQDN -> Mail Rules) work for several users (two, to be exact) and don't for the rest (about 15 or so).
The usual culprits have been reviewed: 'Enable Server-Side Mail Rules' is checked in Mail -> Settings -> Filters, 'Allow users to configure server-side mail rules' is checked in Web -> Sites -> Web Services, users can create vacation notices and email rules without issue via browser, permissions look fine on the contents of /Library/Email Rules and /var/spool/imap/dovecot/sieve-scripts, logs give no indication of any foul play (at least the Email Rules -> debug.log generates the same entries for both functional and non-functional users), etc.
I have noticed that /var/spool/imap/dovecot/sieve-scripts contains only two items, which - you guessed it - line up with the GUIDs of the two functional users. Theoretically every user with a rule should be represented here.
As suggested in this thread:
http://discussions.apple.com/thread.jspa?messageID=11171395&#11171395
I created both a vacation notice and an email rule for several users, thinking that may force the folder creation for those users, but no dice. I even manually created folders for a few users with their GUIDs as the folder names and assigned each user ownership and read/write access. Still nothing. Created a few new test user accounts just to rule out any legacy account weirdness (although it's worth noting that I completely redid the OD and recreated user accounts after the upgrade) and replicated the problem with these, as well. Lastly, used Inspector to compare OD attributes between functional and non-functional accounts, with no glaring differences.
Help!

Did you find an answer? I encounter the same problem on my new MiniServer. Deleted and created all users several times, but just for some accounts mail is working.
Do you have the answer?
(new to this site, read a lot already, but not found)

Mail not working for local users

I have sunOS 5.9 running on sun sparc
mail is not working on this system even for local users.
I have tried from the command prompt
mail username
Test email
^D
nothing happens after control D, I don't get command prompt.
I also tried
mail username
Test email
nothing happens
sendmail daemon is not running on this system but my understanding is that sendmail is not required. I need mail to work only for local users to receive emails for failed cron jobs etc, it is not required for this system to send or receive emails to/from outside world.
Can someone guide or point in right direction to fix mail functionlality for local users?

Actually, with recent versions of sendmail, you do need sendmail running to be able to send mail.
You never used to, but since they made sendmail no longer setuid root, you do.
Sendmail has essentially been split into 2 daemons a local queue runner with handles sending sent by local users.
And a listener daemon with listens for remote connections.
If you want to be able to send mails but not have sendmail listening, you have a couple of options.
You can either run only the local queue runner and not run the listener. In this case you have to configure the local queue runner to send mails onto a external mail host for processing. This requires editing /etc/mail/submit.cf
Alternately, you need to configure the local listener to only bind to the localhost port so it can't be contacted from external sources.
This requires editing sendmail.mc and regenerating a new sendmail.cf
I tend to favour the latter option as the former limits your ability to do things like local aliases of root: [email protected] to send all your root mail to a central account.
This is the sendmail.mc you will need
divert(0)dnl
VERSIONID(`@(#)main.mc 1.5 (Sun) 08/10/00')
OSTYPE(`solaris8')dnl
DOMAIN(`solaris-generic')dnl
DAEMON_OPTIONS(``Port=smtp, Addr=127.0.0.1, Name=MTA'')dnl
FEATURE(`no_default_msa')dnl
MAILER(`local')dnl
MAILER(`smtp')dnl

Need MBAM 2.5 Helpdesk and selfservice sites to open for authenticated users with no password prompt

I Need MBAM 2.5 Helpdesk and self service sites to open for authenticated users with no password prompt. I just cant seem to get this to work. The account used in the application pool has its SPN registered and delegation set. I can use that account to login
to the sites but am prompted for a password. That said anyone I add into the helpdesk users group cannot negotiate the sites. Only the account I have set in the application pool can. I want domain authenticated users that have been added to the MBAM Help Desk
Users group to negotiate the site with NO password challenge at all.
tconners

This generally means that your SPN is not set up correctly. Let's say the web server you installed the SSP on is lance.contoso.com and your app pool creds are corp\lance. You should set an SPN similar to setspn -s http/lance.contoso.com
corp\lance. In your browser, you should now be able to access the SSP without prompts. However, if you still get prompted, generally that means that your local intranet zone in IE does not have an entry for *.contoso.com. Since you are entering
an FQDN in your browser, IE interprets the "." to mean "on the internet" which breaks Kerberos authentication. By adding *.contoso.com to your local intranet zone, you are telling it that lance.contoso.com is on the intranet, so use
Kerberos.
I can confirm, that I have exact configuration and I always get the password promt for the very first time. We have 2 server (1xIIS and 1xSQL) infrastructure in production with SPN set like it should and I get the password prompt.

PCD Business Objects Permissions for Authenticated users

Hi All,
I am working on SRM7.0 Business package installed on Portal NW7.01.
I wanted to understand Which permissions should i provide to "Business Objects" PCD Folder for Authenticated users.
Should it be Administrator "None" and End User "ON"
Or Should it be Administrator "Read" and End User "ON"
Regards,
Ashish Shah

Hi Sandeep,
I was wondering what is the need of assigning permissions to "Everyone" Group and "Authenticated Users"
2. Group: Everyone(built in group)
Administrator:Read
Enduser:checked
3. Group:: Authenticated Users(built in group)
Administrator:Read
Enduser:checked.
If i am not using Anonymous users , should i only assign this permission?
Group:: Authenticated Users(built in group)
Administrator:Read
Enduser:checked.
Regards,
Ashish Shah

Send Mail to External Mail ID's for Multiple Users

Hi All,
I want to send mail from SAP to External mail ID's for multiple Users.The program is ok.
But I want to send this to Multiple external Mail id's. Where should I assign this receivers list. Pls advise.
What is the transaction to assign multiple receivers.?
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        DOCUMENT_DATA              = GD_DOC_DATA
        PUT_IN_OUTBOX              = 'X'
        COMMIT_WORK                = ''
      TABLES
        PACKING_LIST               = IT_PACKING_LIST
        CONTENTS_TXT               = IT_MESSAGE
        RECEIVERS                  = IT_RECEIVERS
      EXCEPTIONS
        TOO_MANY_RECEIVERS         = 1
        DOCUMENT_NOT_SENT          = 2
        DOCUMENT_TYPE_NOT_EXIST    = 3
        OPERATION_NO_AUTHORIZATION = 4
        PARAMETER_ERROR            = 5
        X_ERROR                    = 6
        ENQUEUE_ERROR              = 7
        OTHERS                     = 8.
Thank You.
Pranitha.

IT_RECEIVERS parameters needs to be passed as shown below.
    wa_receivers-receiver = "..........External mail id".
    wa_receivers-rec_type = 'U'.
    wa_receivers-express = 'X'.
    APPEND wa_receivers TO lt_receivers.
    CLEAR wa_receivers.
Once mail is triggered to the external mail id's, check the mail is transferred from SAP or not using the tcode SCOT.
In SCOT,follow the path UTILITIES-> Overview of send orders.
Regards,
Satish Kanteti

Make UDF Read-only for all users

Hi
Can i use any script to make a UDF read-only for all users?
i am looking at CPRF and CUFD Tables
thanks

Hi,
You should never try updating system table directly. That will against supporting policy by SAP.
Thanks,
Gordon

Need to give REVOKE CLOSE option in CO02 only for selective users

Hello,
Need to Restrict Revoke Close Option in Tcode CO02 (Under Functions - Restrict Processing - Revoke Close) through Role/Object Level. Can any one suggest how to control this . Need to give access for CO02 for 5 Users , but only 2 Users can able to do Revoke Close Option , other 3 Users should not able to do this activity.
BR,
Murali

There is no authorization object as B_USERSTAT_T , but there is a authorization object as B_USERSTAT . I tried to create a Temporary Role and manually assigned this Object . In this object there is no way to control REVOKE Close option .
But there is one way noted in Google to restrict Revoke Close option .
1.Goto BS22
2.Select the system status TEC0 (I0045) & just duble click it,
3.Maintain the Revoke technical completion (BUTA) =Forbidd (not allowed),
But if i set the above Parameter , this will restrict Revoke Option for all the users . I need to control ONLY for selective users . I can set some value in user data for those users , based on that i can write some coding to restrict , but i want to know where to write this code .... I tried in some area , but it never works.
Can any one give some idea to fix this issue.
BR,
Murali

Latest update 3.3 only for lion users? total mess

apple did a major step to indicate that aperture is no app for "pro"users. If it should be that it should support not only the latest system version!
latest update 3.3 only for lion users? total mess.
I will look for another solution. Sad.

Hi,
I was wondering if somebody could give me some guidance please?
I bought an N73 in September after much research and a lot of deliberating, I decided to purchase one (via O2 in England) even though i had heard lots of unhappy people claiming the phone had ruined their life etc due to its software faults.
I haven't updated my phone yet since buying it mainly due to being put off by the number of NEW problems the updates can cause.
I dont have any major problems with my phone, its got a bit slower with time and the camera isnt very quick when uploading and sometimes switches off (but i think its to do with the slide mechanism on the back), anyway i would be grateful if you would give me your honest opinion as to whether i should upgrade to the latest firmware or not!
Many Thanks
Richie

When I try to play a dvd Macbook Pro I get a box with the message,This function is only for activated users. To activate go to Preferences and Donate" That took me to Mr. Gecko"s Facebook page wanting me to donate $1.99! Does any one know what this is? H

When I try to play a dvd on my Macbook Pro I get a box with the message " This is only for activated users. To activate go to preferences,donate" this takes me to Mr. Gecko's facebook page asking me to donate $1.99-$4.99.
Any clues on what this is, and/or how to bypass it? If I can report this to someone? Thanks

Sure sounds like malware, unles you installed something from a questionable site, then it's still malware but in a payware form as playing DVDs is free on Mac's.
Unless the DVD has software on it perhaps?
Does this work on any movie DVD or is this a special kind of DVD with software on it from someplace?

Edit password rules only for BCC user

Hi all,
our customer has requested some changes on the password rules only for BCC users.
So, i should change the follow component:
/atg/userprofiling/passwordchecker/PasswordMinLengthRule
/atg/userprofiling/passwordchecker/PasswordMixedCaseRule
/atg/userprofiling/passwordchecker/PasswordMustIncludeNumberRule
/atg/userprofiling/passwordchecker/PasswordMustIncludeSymbolRule
/atg/userprofiling/passwordchecker/InternalPasswordMustNotIncludeLogin
/atg/userprofiling/passwordchecker/InternalPasswordNotInPreviousNRule
But the component password rules above, should be changed only for the BCC users. How can i do this?
Edited by: user7618461 on 30-set-2011 3.45

Hi Christoph,
in your Identity Store, you can use LDAP Server as authentification method (Tab Workflow). You need an attribute which contains the DN of the users and fill out port and host of your directory. That means that the PW can remain in the AD. Just try it, haven't used this possibility yet. You could also use Kerberos via AD instead. These scenarios don't cover your requirement that some might be without an AD account (which is not that common).
Otherwise it's getting difficult again to get all passwords at once from your AD. You have to decrypt the passwords without a key... AD could store a lower encrypted password for NT4, which makes this a bit easier, but still "unesthetic". You get these hashes via SSL and not with the common initial load jobs.
The PW-Hook gets the passwords before they are set. That's why you could store and ecrypt the new passwords in the Identity Store and wait for 1 or 2 months till everyone had to change their password (if you use this policy).
Best regards,
Nils
Edited by: Nils Sibold on Jul 18, 2008 3:10 PM

I want to install an app but only for one user on my imac with Lion

I have 2 users on my mac. I would like to install some apps (iwork) but only for one user and not the other user. How can I do this?

Setup of iWork in your wife's account should only occur the once.
Updates can be performed through your account and are usually performed via Software Update.
Messages should not be popping up in your wife's account if all the iWork updates have been performed.
Go to Software Update and download and install all the iWork updates.
Unless you keep OSX up-to-date, messages will continue to come up when your wife logs into her account.

[solved[X superlaggy after hd went out of space, but only for one user

So the netbook (eeepc 1101ha) went out of diskspace while running and froze. I freed up some space and restarted X, but it failed so I rebooted. Same story then. It either loads and becomes super slow or doesn't load at all. I use dwm wm which to my knowledge doesn't save to config files that might have been corrupted during the moment with no diskspace. Other wms have same problems too, but only for that user.
Here are some lines from /var/log/Xorg.0.log/
[ 3068.496] (**) Power Button: always reports core events
[ 3068.496] (**) Power Button: Device: "/dev/input/event4"
[ 3068.507] (II) Power Button: Found keys
[ 3068.507] (II) Power Button: Configuring as keyboard
[ 3068.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 3068.507] (**) Option "xkb_rules" "evdev"
[ 3068.507] (**) Option "xkb_model" "evdev"
[ 3068.507] (**) Option "xkb_layout" "us"
[ 3068.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3068.683] (II) No input driver/identifier specified (ignoring)
[ 3068.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3068.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3068.684] (**) Sleep Button: always reports core events
[ 3068.684] (**) Sleep Button: Device: "/dev/input/event3"
[ 3068.697] (II) Sleep Button: Found keys
[ 3068.697] (II) Sleep Button: Configuring as keyboard
[ 3068.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 3068.697] (**) Option "xkb_rules" "evdev"
[ 3068.697] (**) Option "xkb_model" "evdev"
[ 3068.697] (**) Option "xkb_layout" "us"
[ 3068.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 3068.700] (II) No input driver/identifier specified (ignoring)
[ 3068.709] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event7)
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: always reports core events
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event7"
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Found keys
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
[ 3068.730] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
[ 3068.730] (**) Option "xkb_rules" "evdev"
[ 3068.730] (**) Option "xkb_model" "evdev"
[ 3068.731] (**) Option "xkb_layout" "us"
[ 3068.742] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 3068.742] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3068.742] (**) Eee PC WMI hotkeys: always reports core events
[ 3068.742] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 3068.750] (II) Eee PC WMI hotkeys: Found keys
[ 3068.750] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 3068.750] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 3068.750] (**) Option "xkb_rules" "evdev"
[ 3068.751] (**) Option "xkb_model" "evdev"
[ 3068.751] (**) Option "xkb_layout" "us"
[ 3068.752] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3068.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3068.753] (**) AT Translated Set 2 keyboard: always reports core events
[ 3068.753] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3068.773] (II) AT Translated Set 2 keyboard: Found keys
[ 3068.774] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3068.774] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 3068.774] (**) Option "xkb_rules" "evdev"
[ 3068.774] (**) Option "xkb_model" "evdev"
[ 3068.774] (**) Option "xkb_layout" "us"
[ 3068.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.775] (II) LoadModule: "synaptics"
[ 3068.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3068.776] (II) Module synaptics: vendor="X.Org Foundation"
[ 3068.776] compiled for 1.8.0.902, module version = 1.2.2
[ 3068.776] Module class: X.Org XInput Driver
[ 3068.776] ABI class: X.Org XInput driver, version 9.0
[ 3068.777] (II) Synaptics touchpad driver version 1.2.2
[ 3068.777] (**) Option "Device" "/dev/input/event6"
[ 3068.823] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 3068.824] (**) Option "TapButton1" "1"
[ 3068.824] (**) Option "TapButton2" "2"
[ 3068.824] (**) Option "TapButton3" "3"
[ 3068.863] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3068.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3068.913] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3068.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.914] (II) Synaptics touchpad driver version 1.2.2
[ 3069.383] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 3069.384] (**) Option "Device" "/dev/input/mouse0"
[ 3069.397] (**) Option "TapButton1" "1"
[ 3069.397] (**) Option "TapButton2" "2"
[ 3069.397] (**) Option "TapButton3" "3"
[ 3069.417] Query no Synaptics: 6003C8
[ 3069.417] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 3069.418] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 3069.430] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 3069.430] (II) UnloadModule: "synaptics"
[ 3069.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 3069.431] (II) No input driver/identifier specified (ignoring)
Any ideas?
Last edited by idjut (2010-07-13 00:43:04)

R00KIE wrote:
I'm not familiar with DWM but I would look inside ~/.local ~/.config and ~/.cache , maybe something is stored there.
If that doesn't work you may try moving all the hidden stuff to a backup folder and start the X session again.
Something must be causing that and most probably it's some dot file stashed away inside one of those dot directories (you say new users work just fine so it's not a system problem).
Apart from this I'm out of ideas, once I had XFCE (I know its not the same) act really strange and the problem was related with some corrupted saved session file, once I deleted it everything was fine again.
Didn't work! Any other tips, ideas?

Mail crashing constantly in Leopard but only for one user

Has anyone else seen this problem? Leopard installed correctly and seems to run fine on a G4 Powerbook BUT Mail3.0 crashes constantly. Cannot open or delete a message. Simply opening and then quitting causes a crash. However, I can still receive and send mail. Here is the uncaught exception thrown by Mail:
* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'trying to set a non-ToDo MailboxUid for a ToDo. The MailboxUid for a ToDo must be a ToDosMailboxUid'
Permissions repaired. File ownership checked. Reloaded Leopard with Archive&Restore. Nothing seems to help. However, other logins on the same Powerbook dont have any problems. Mail works fine for those IDs.
Has anyone got a solution or do I have to wait for 10.5.1 for some relief?
Thanks......

Have you tried synchronizing the mailbox? (The pop-up menu accessed by the little cog icon in the lower left corner of the Mail window, or the Mailbox menu)
How about taking the Mail account off line and then reconnecting it?
Do you have lots of messages in this Inbox? Moving old email to an archive "On My Mac" so they're removed from the dot-Mac server reduces the amount of synchronization that has to be done and thus less risk of encountering a corrupt message file.
Are there lots of attachments to messages? Sometimes a corrupt attachment can cause a problem.
Just some ideas.

Enabling mail sendig only for authenticated users

Similar Messages

Maybe you are looking for