Enabling mailman on ML server?

I have a very old machine (it can't go beyond 10.4, that's how old), one of whose uses is to host a mailing list. The interface for the service was built into the Tiger admin application, but it's not accessible (if it exists) in Mountain Lion server.
How do I enable mailman (or a similar service)?
I've tried serveradmin, but "sudo serveradmin settings mail" turns up nothing relevant when searching for "man" or "list."
My web searches turned up nothing useful, except that there can be a mailman key in MailServicesOther.plist. (What would the value be? A dict with enabled -> <true/>?) I don't know how to put that into effect (restart the Mail service?), and once it's in effect, I don't know how I'd administer it.
I'll keep this short by not complaining how badly supported MLS seems to be.
— F

Alas, Mailman is gone. Here's one guide for installing it yourself:
http://www.livetime.com/mountain-lion-mailman-mailing-list/

Similar Messages

Imp:How to find out whether client authentication Enabled on the Web Server

Hi,
I am trying to find out whether the Client Authentication Enabled on the Web Server or not.
Reason for doing this, if we have two certificates in the key store which will authenticate the Web Server, JSSE Authentication will always take the first cert from the keystore. If the first Certificate is Expired, it will fail while doing the HandShake.
So if I can find out whether Client Authentication is Enabled or not, then I can prompt a dialog for the user to select the Certificate for the Hand Shake.
Thanks in advance for any Response,
Krish.

AUTH_TYPE will tell you only if it SSL or not. It won't say whether the Client Certificates Required for SSL Connection.
Also, AUTH_TYPE is not part of the Http Headers.
If there is any other solution, greatly appreciated.
Thanks
Krish.

How to enable hibernation in Windows Server 2008 R2

Hi
I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
Also checked with powercfg /energy & getting given below errors.
Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
The hardware in this computer does not support the S3 sleep state.
Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
The hardware in this computer does not support the S4 (Hibernate) state.
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
with the hardware in this computer.
Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
Thanks.

Hello,
I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Enabling SSO with Weblogic Server

Hi,
Can someone please forward some documention on enabling SSO with Weblogic server for different applications using the admin console.
Is enabling SSO only possible programmatically??
Is there an external server amongst the Weblogic Platform that maintains this SSO information??
Regards,
Mukta

Pradeep,
Here are some questions for you.
1. what version of Weblogic App Server you are using?
2. Is it a weblogic Portal or a Java application deployed
on a Weblogic App Server?
3. You have mentioned that the users are stored in a table. Is it a database table ?
Anyway see the following link as a starting point?
http://e-docs.bea.com/wls/docs81/jconnector/security.html#1216783
If the customer has lot of other web applications that they want to integrate you can look at third party authentication solutions (Ex: Siteminder). But if it is a few or limited applications then custom solution would be more appropriate from the cost perspective.
Hope this can be a starting point.
-Regards
-Venkat Malempati

Enabling SNC on SAP Server

I am trying to enable SNC on SAP Server. I have downloaded the SAP Cryptographic library and installed it as per in the instructions in http://help.sap.com/saphelp_erp2004/helpdata/en/96/709b3ad94e8a3de10000000a11402f/frameset.htm
Using STRUST transaction I created a PSE for SNC.
I have modified with the instance profile (using RZ10 transation) and specified the following values
snc/enable - 1
snc/accept_insecure_rfc -1
snc/accept_insecure_gui - 0
snc/accept_insecure_cpic -1
snc/permit_insecure_start -1
snc/data_protection/min - 2
snc/extid_login_diag -1
snc/extid_login_rfc - 1
and restarted the SAP Server.
I got the following error
trc file: "dev_w7", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Nov 16 18:44:31 2007
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' ...
B Library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.43)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 5840
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 7 5840) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 10528 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05F90040, size: 3192688)
M DpShMCreate: allocated sys_adm at 05F90040
M DpShMCreate: allocated wp_adm at 05F91B58
M DpShMCreate: allocated tm_adm_list at 05F94478
M DpShMCreate: allocated tm_adm at 05F944A0
M DpShMCreate: allocated wp_ca_adm at 0623B0E8
M DpShMCreate: allocated appc_ca_adm at 06240EA8
M DpShMCreate: allocated comm_adm_list at 06242DE8
M DpShMCreate: allocated comm_adm at 06242E00
M DpShMCreate: allocated vmc_adm_list at 06289AD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06289AF8
M DpShMCreate: allocated wall_adm at 06289B00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Nov 16 18:44:32 2007
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'C:\usr\sap\EUC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 43
C patchcomment View with literal containing (0x60) (786638)
C np:(local) connection used on SAP50UNI
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:33 2007
C Provider Release:08.10.1830
C Failed to initialize provider SQLNCLI. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: Failed to set MARS property.
C
C Fri Nov 16 18:44:44 2007
C Cache sizes: header 68 bytes, 20000 names (31520000 bytes), 1000 dynamic statements (5672000 bytes), total 37192068 bytes
C Using shared procedure name cache SAP50UNI_EUCEUC_EUC_MEM initialized by another process.
C Connected to db server : [SAP50UNI] server_used : [np:(local)], dbname: EUC, dbuser: euc
C pn_id:SAP50UNI_EUCEUC_EUC
C Not using MARS (on sql 8.0)
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20071116 184432 SAP50UNI
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
I
I Fri Nov 16 18:44:52 2007
I MtxInit: 7 0 0
M SHM_PRES_BUF (addr: 0A650040, size: 4400000)
M SHM_ROLL_AREA (addr: 5F030040, size: 159744000)
M SHM_PAGING_AREA (addr: 0AA90040, size: 72089600)
M SHM_ROLL_ADM (addr: 0EF60040, size: 1595440)
M SHM_PAGING_ADM (addr: 0F0F0040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0F180040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 08060040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 7 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 7, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 140600C8, size: 30000000, end: 15CFC448)
B dbtbxbuf: Buffer TABLP (addr: 15D000C8, size: 10240000, end: 166C40C8)
B dbexpbuf: Buffer EIBUF (addr: 166D00D0, size: 4194304, end: 16AD00D0)
B dbexpbuf: Buffer ESM (addr: 16AE00D0, size: 4194304, end: 16EE00D0)
B dbexpbuf: Buffer CUA (addr: 0FC300D0, size: 3072000, end: 0FF1E0D0)
B dbexpbuf: Buffer OTR (addr: 16EF00D0, size: 4194304, end: 172F00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
N SncInit(): Initializing Secure Network Communication (SNC)
N PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 16/32/32)
N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)
N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)
N SncInit(): Trying builtin default as a
N gssapi library name: "sncgss32.dll".
N SncInit(): snc/gssapi_lib UNDEFINED in profile!
N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
M *** ERROR => DlLoadLib: LoadLibrary(sncgss32.dll) Error 126 [dlnt.c 237]
M Error 126 = "The specified module could not be found."
N *** ERROR => SncPDLInit(): DlLoadLib("sncgss32.dll")=DLENOACCESS
N [sncxxdl.0340]*** ERROR => SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll not loaded
N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
N sec_avail = "false"
M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001) [thxxsnc.c 223]
M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT) [thxxsnc.c 225]
M in_ThErrHandle: 1
M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1) [thxxhead.c 9413]
M
M Info for wp 7
M
M stat = 4
M reqtype = 6
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 252]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 7 5840) [dpnttool.c 357]
I am unable to connect to SAP Server using SAP GUI.
Any help on this is appreciated.
Thanks

you have two problems (read the log):
> C Failed to initialize provider SQLNCLI. See note
> #734034 for more information.
> C Using provider SQLOLEDB instead.
> C OpenOledbConnection: Failed to set MARS property.
Check the mentioned note.
> SncInit(): Trying builtin default as a
> gssapi library name: "sncgss32.dll".
> ncInit(): snc/gssapi_lib UNDEFINED in profile!
> N YOU DEFINITELY SHOULD SET snc/gssapi_lib !!
> M *** ERROR => DlLoadLib:
> LoadLibrary(sncgss32.dll) Error 126 [dlnt.c
> 237]
> Error 126 = "The specified module could not be
> found."
> *** ERROR => SncPDLInit():
> DlLoadLib("sncgss32.dll")=DLENOACCESS
> [sncxxdl.0340]*** ERROR =>
> SncPDLInit()==SNCERR_INIT, Adapter (#0) sncgss32.dll
> not loaded
> N [sncxxdl.0604]<<- SncInit()==SNCERR_INIT
> N sec_avail = "false"
> M ***LOG R19=> ThSncInit, SncInitU ( SNC-000001)
> [thxxsnc.c 223]
> M *** ERROR => ThSncInit: SncInitU (SNCERR_INIT)
> [thxxsnc.c 225]
> M in_ThErrHandle: 1
> M *** ERROR => SncInitU (step 1, th_errno 44, action
> 3, level 1) [thxxhead.c 9413]
the log clearly sais, what to do... what is unclear?
Markus

Powershell 2.0 already enabled on my Windows Server 2008 R2 SP1

I have installed the Powershell ISE feature.
Is Powershell 2.0 already enabled on my Windows Server 2008 R2 SP1?
In DISM /Online /Get-Features none of these pre SP1 exist in SP1.
DISM/Online/Enable-Feature/FeatureName:NetFx2-ServerCore
DISM/Online/Enable-Feature/FeatureName:NetFx2-ServerCore-WOW64
DISM/Online/Enable-Feature/FeatureName:MicrosoftWindowsPowerShell
In SP1 features NetFx3 exists but no MicrosoftWindowsPowerShell.
How do I enable PowerShell 2.0?

Hi Philpsophiae,
By default, Windows PowerShell is not installed on a computer that is running Windows Server 2008 R2 Core. You can use the following methods to install Windows PowerShell on a computer that is running Windows Server 2008 R2 Core.
How to install Windows PowerShell on a computer that is running Windows Server 2008 R2 Core
Please feel free to let us know if these methods above are not helpful to you.
Best Regards,
Anna Wang

Enabling ssl on Weblogic server 5.1 using Verisign certificate.

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

"Hi,I am trying to enable ssl in Weblogic server 5.1The properties set in my properties file areweblogic.security.certificate.server=servercert.pem(sent from the verisign via email)weblogic.security.key.server=cp8212-2d2-key.der(generated by the Certificate Servlet of Weblogic Server)

Enabling Trust Between WebLogic Server Domains

Hi everyone,
We have two sites, each one running one WL 8.1 instance. The problem is that we have different users in each one, and they need to access both sites (using a RMI call).
When the user is created in both sites, there is no problem. But we do not want to replicate all users in all sites.
So this is what we are trying to do:
Create the user in one site and enable trust between Weblogic Server domains (giving both sites the same password), so once one user is authenticated, the other site will not try to authenticate this user again. But since this user does not exist in the other site, he has no permission to do anything at all. Because of that we receive the following error message: "User a7ax does not have permission on br to perform lookup operation."
Does anyone have any idea about how we can handle this, and enable the users to use other sites, without creating the user in both sites?
Thanks in advance.
Cesar

In order to debug this issue you need to determine which kind of security has been applied on the web service deployed on remote weblogic server.
Whether it requires username/password from the calling web service ?
or it requires any kind of digital certificate from the calling web service etc......
the most usual secnario where cross-domain security is required is as:
If a user- Test calls a service- ServiceA on Weblogic Domain-domainA and provides its credentials and is authenticated properly.
Then if this service requires to call another service -ServiceB on another Weblogic Domain - DomainB which is also secured then there should be a cross-domain trust should be enabled between the domains DomainA and DomainB so that the subject populated in the domainA can be transferred to DomainB.
Now you should determine whether this is the secnario you are trying to achieve or it is something else.
Also try to use the following debug flag in the DomainB where the provider service is deployed to get the exact reason why it is failing to verify the security check.
-Dweblogic.DebugSecurityAtn=true
This debug flag is enabled as JAVA_OPTIONS.
Thanks,
Sandeep

Problems enabling nfs client and server

I just re-build a solaris 11.1x86 on a x4640 SunFire
Have problems enabling nfs
First i typed the following command:
# svcs network/nfs/server
disable
Second I typed the following command:
#svcadm enable network/nfs/server
# svcs network/nfs/server
offline
did this 3 or 4 times without success...
any ideas?
I holding production here! Please help!!

Let's rule out the easier stuff first...
Do you have something shared?
I think you need to have something shared before you can enable the nfs server service.
Or, if you share something, the service is started automatically. See below.
Thanks, Cindy
# svcs -a | grep nfs
disabled Feb_26 svc:/network/nfs/client:default
disabled Feb_26 svc:/network/nfs/server:default
disabled Feb_26 svc:/network/nfs/rquota:default
# svcadm enable svc:/network/nfs/server:default
# svcs | grep nfs
disabled 13:51:52 svc:/network/nfs/server:default
# zfs set share.nfs=on rpool/cindy
# share
rpool_cindy /rpool/cindy nfs sec=sys,rw
# svcs | grep nfs
online Feb_26 svc:/network/nfs/fedfs-client:default
online Feb_27 svc:/network/nfs/status:default
online Feb_27 svc:/network/nfs/cbd:default
online Feb_27 svc:/network/nfs/mapid:default
online Feb_27 svc:/network/nfs/nlockmgr:default
online 13:52:35 svc:/network/nfs/rquota:default
online 13:52:35 svc:/network/nfs/server:default

How to enable directory binding in Server Admin?

Running Server 10.4.9
I cannot enable directory binding in Server Admin.
The checkbox becomes un-ticked upon save.

Hi marc
There must be something in the way you have configured your Server that is preventing this from happening. I maintain two OD Master servers at a remote site and both of them do not have your problem. I don’t know of any Terminal commands that control directory binding and there seems to be no reference to it in the Terminal Manual 2nd Edition. However, that does not mean there won’t be one. Both servers I administer do not have ‘require clients to bind to directory’ ticked, but do have Enable directory binding ticked. These settings seem to have been set this way when promoting from Standalone to Open Directory Master once DNS and DHCP were configured and running as Services. By the way all settings in this part of Open Directiry I can access and modify with no problems on both servers.
Is DNS being supplied by another server as well as authentication eg: from an AD KDC? Also how do you connect to your Server using Server Admin? Do you use the .local name or its IP address? Have you tried using the FQDN?
HTH

FILE STREAM error while enabling it in SQL SERVER 2012

I'm trying to use Filetable in my Project. For which i need to enable FILESTREAMS ,
when i try to do that through Configuration Manager i'm getting following error:
"There is a unknown error in filestream settings 2012"
ChecK the Parameters are valid. (0X80041008)
Can anyone reply as to how i can fix this.
Thanks in Advance

Hi sthilaks,
Have you installed SQL Server 2012 Service Pack 1? If not, I suggest installing it and check the result again.
SQL Server 2012 SP1 Is Now Available!
http://blogs.msdn.com/b/sqlreleaseservices/archive/2012/11/07/sql-server-2012-sp1-is-now-available.aspx
Allen Li
TechNet Community Support

How to enable javascript in windows server 2008 R2 enterprise ?

Hi all,
Hope doing well,
sir i am using windows server 2008 R2 enterprise operating system.
i am running my web application in localhost. it's working fine.
but i have used timer using javascript and some javascript function that is not working in this application.
i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
enabled javascript and my application is not working.
plz help me. it's urgent
waiting for reply.
thanks in advance.
vicky Bangalore

Hi Vicky,
Please make sure that the Javascript is enabled on you IE.
To do this, please go to Control Panel->Internet
Options, click on security tab,
click on customer level button. Please scroll
down to Scripting, underScripting
of Java applets, click enable.
OR
Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Not able to enable web access (http server) on 5500

Hi
i have 5500 Swtich iam not able to enable http server in it
the message show below
Core-Switch> (enable) show ip http
HTTP Information
HTTP server: disabled
HTTP port: 800
Web Interface: Not supported
HTTP active sessions: 0
Core-Switch> (enable) show ver
WS-C5500 Software, Version McpSW: 5.5(18) NmpSW: 5.5(18)
Copyright (c) 1995-2002 by Cisco Systems
NMP S/W compiled on Dec 16 2002, 15:34:48
MCP S/W compiled on Dec 16 2002, 15:30:03
System Bootstrap Version: 3.1.2
Hardware Version: 1.4 Model: WS-C5500 Serial #: 069062010
Mod Port Model Serial # Versions
1 2 WS-X5530 008731527 Hw : 1.8
Fw : 3.1.2
Fw1: 4.1(1)
Sw : 5.5(18)
WS-F5520 008715296 Hw : 1.1
WS-U5533 009612560 Hw : 1.0
2 2 WS-X5530 008146970 Hw : 1.5
Fw : 3.1.2
Fw1: 3.1(2)
Sw : 5.5(18)
WS-F5520 007590229 Hw : 1.0
WS-U5533 009613415 Hw : 1.0
3 24 WS-X5234 022374107 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
4 24 WS-X5234 018022744 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
5 24 WS-X5234 018025296 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
6 24 WS-X5234 017582607 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
7 24 WS-X5234 017919621 Hw : 1.0
Fw : 4.5(2)
Sw : 5.5(18)
10 1 WS-X5304 024975347 Hw : 7.7
Fw : 20.22
Fw1: 3.1(1)
Sw : 12.1(20)

have you run the 'set ip http server enable' command at the CatOS CLI of the 5500?
as you've shown above, it is currently disabled
does the switch have an ip address assigned to interface SC0? does SC0 belong to an inactive VLAN?
if the switch OS does not support it, it should display an error as follows when you type in the command: (as shown below)
console> set ip http server enable
Feature not supported on the system.

Enable logging for FTP server in 10.8

Can't figure out how to enable 10.6-style logging for FTP server in 10.8. It used to be configurable via Server Admin allowing you to choose what to log and so on and the logs would go to /Library/Logs. Now I only see some irrelevant stuff in /var/log/system.log and I want to have all the transfers logged on this server. Tried setting parameters via serveradmin ftp:setting = param but it wouldn't appear in the list afterwards no matter what (just copied those off a working 10.6 server).
As a bonus, I can't figure out where the settings for logging are stored in a 10.6 server either. There's certainly not a mention of a file named FTP.transfer.log. Weird!

So to help anyone who finds themselves in the same boat and wants to enable ftpd logging on OSX 10.8 proper:
All operations assume root which is obtained by issuing 'sudo su' or just prefixing every command with 'sudo'.
First you edit the ftpd's launchd plist file:
pico /Applications/Server.app/Contents/ServerRoot/System/Library/LaunchDaemons/com.a pple.ftpserver.plist
Find the section titled 'ProgramArguments'. Amend it so it looks like this:
<key>ProgramArguments</key>
 <array>
 <string>ftpd</string>
 <string>-ll</string>
 <string>-r</string>
 <string>-n</string>
 <string>-d</string>
 <string>-c</string>
 <string>/Library/Server/FTP/Config</string>
 <string>-L</string>
 <string>/var/log/ftpd.log</string>
 </array>
Second you edit /etc/asl.conf. This is necessary to make '-d' (debug) switch work since by default syslog won't log any debug-level messages at all.
pico /etc/asl.conf
At the end of the file add the following:
# ftpd verbose logging
? [= Facility ftp] [<= Level debug] file /var/log/ftpdv.log
Third important step is to reboot the server. ftpd's plist configuration is cached somewhere so restarting just the ftp server alone won't work.
Now what the added switches do:
-ll enables some logging (PUT and GET commands only despite what the man pages leads you to believe) to a file specified later by -L /path/to/file
-d enables debug mode which logs everything - including server's response. May be too verbose but at least you get a log of every single command issued to the server by your clients.

Issues enabling AlwaysON in SQL Server 2014 Standard

Hi
I am trying to configure AlwaysOn and having issues enabling in SQL Server configuration manager
OS : Windows Server 2012 R2
SQL : SQL Server 2014 Standard Edition
Here is what i see in config manager :
The AlwaysOn Availability Groups feature requires the x86(non-Wow) or x64 Enterprise Edition of SQL Server 2012 (or later version) running on Windows Server 2008 (or later version) with WSFC hotfix KB 2494036 installed. This SQL Server edition and/or Windows
Server system do not meet one or more of these requirements.
I patched both the nodes and ran the cluster validation as well which didn't report any missing patches. Couldn't find any documentation/solution for this.
Can someone please help me with this ???

Thanks.
Is the configuration of Always on FCI is same as Traditional WSFC ?
Yes just think of it as a regular clustered sql instance
An FCI is a single instance of SQL Server that is installed across Windows Server Failover Clustering (WSFC) nodes
and, possibly, across multiple subnets.
https://msdn.microsoft.com/en-us/library/ms189134(v=sql.110).aspx

Enabling mailman on ML server?

Similar Messages

Maybe you are looking for