Enabling multi org??

hai ,
how u enabling multi org for 11.5.10.2
current ADI LEVEL WAS2. HOW U UPGRADE TO ADI5??
REGARDS
DBA

how u enabling multi org for 11.5.10.2Check Note: 396351.1 - Switching from Single-Org To Multi-Org
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=396351.1
To verify if an installation of Oracle Applications has been converted to Multi-Org, please check the following:
- If 'Convert to MultiOrg' does not appear in adadmin, then your installation is Multi-Org
- Run the following SQL statement, if it returns 'Y', then your installation is Multi-Org:
SQL> select multi_org_flag
from fnd_product_groups;
ADI LEVEL WAS2. HOW U UPGRADE TO ADI5??Check Note: 233044.1 - About Oracle Applications DBA Minipack 11i.AD.I (AD.I.5)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233044.1

Similar Messages

MO: Operating Unit Non Usable Operating Unit for Multi-Org Conversion

Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please advice
Thanks
Prince

user12094010 wrote:
Hello Hussein
I enabled multi org in 11i and mo Operating unit values set as Non Usable Operating Unit for Multi-Org Conversion, is ok to set is value or will that cause any responsibility.This might cause issues.
ORA-20001: APP-FND-2902: Multi-Org Profile Option is Required [ID 399910.1]
How To Prevent the Profile Option MO: Operating Unit being set to NULL at Site Level? [ID 393560.1]
In R12.1.3 I am getting an error like this
APP-FND-02902: Multi-Org profile option is required. Please set either MO: Security Profile or MO: Operating Unit profile option.
Please adviceR12 - Error ORA-20001, APP-FND-02902 Accessing Profile Classes Form With Multi-Org Access Control (MOAC) Enabled [ID 602141.1]
Unable To Open Customer Account Details, Error :ORA-20001: APP-FND-02902: Multi-Org profile option is required [ID 987165.1]
Entering to Profile Classes Gets Ora-20001, App-Fnd-02902. Multi Org Profile Option Is Required [ID 465132.1]
Error 'ORA-20001: APP-FND-02902: Multi-Org Profile Option Is Required' When Open Account Details [ID 1406860.1]
Some Web Pages Fail To Load After Patch Application [ID 1281328.1]
You may also search MOS website for APP-FND-02902 and go through the docs.
Thanks,
Hussein

Subledger Period Maintenace in Multi-Org Environment

Just upgraded to 11.5.9, enabled multi-org to add another operating unit but share the same GL set of books. If I close the period for one operating unit for either AP or AR, the periods also close in the other operating unit. Is there any way to separate the subledger closing process for both operating units?

Hi
I have a setup document for R12 AME regarding invoice approval process.
However i need to find out if i have the same for R11i.
I am not sure whether R12 ame approval doc will be of any help for you, however i can forward you the same if you need it.
Thanks
Manish Jain.

What are the ways to check multi org is enabled?

Hi,
Can anyone tell me what are the methods to check whether multi org is enabled?
-Senthil

Hi,
does multi-org mean multiple inventory organizations? or multiple hr organizations or multiple financials organizations?
In our implementation we have single set of responsibilities in financials modules but multiple inventory organizations. They are using one set of responsibilities to purchase materials for multiple inventory organizations.
In other implementation I worked on they are using few PO responsibilities to purchase materials for many inventory organizations?
What is the relationship? how to map it?
Thanks,

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Multi-Org impact on Oracle CRM modules especially on Oracle Service

Multi-Org impact on Oracle CRM modules especially on Oracle Service
====================================================
I have been searching for any information (notes,whitepapers/ presentation) on the impact of multi org implementation on Oracle Service module and so far not been able to find any either on metalink or on internet.
Any of you have any inputs on this ? Please provide the same if any.
basically,
Looking for the kind of security applied on SR creation form,Debrief form and charges form when a multi org is enabled.
I also tried to test this out in our instance and found that it seems to have no impact.
Gana

HI,
Yes indeed there is a impact of MULTI-ORG on the Service Module in 11i.
All the things are integrated now.
Everything is dependent on the MO:Operating Unit Profile Option and the setup which you had done.
1)
Security on SR creation Form:-
See you can implement the security, but for that you have to setup accordinglly and also to follow the process.
If you create 2 responsibilities with MO profile option different, then none of them will able to see the others data.
Note:-
But if you are using the instance to generate the SR, then you had to make it sure that the ITEM which you are using should be assigned to the Operating unit which is set in the MO profile Options of that responsibility.
2)
Debrief Form:-
As you must know that for debrief to work, you had to setup the Service Activities.
This is where you can define the security.
1) Create a Service activity,
2) Map it with BILLING TYPES
3) Map the Billing Types with Order Management Header and the Line Type
This the place where you can specify the Operating Unit.
When a user will log in and open a debrief form, then he will be able to see only those service activities which are mapped with the operating unit as that of set in MO Profile Option to the user.
3)
Charges:-
The same as the debrief is applied on the charges TAB.
Here you will only able to see the Service activites which are mapped with the operating unit as that of set in MO operating unit.
If you want ITEM level security, then you will be only able to see the items which are assigned to the Operating unit as that of set in the MO profile option.
Hope this will clear your doubt.
If want more clarification, you can ask me.
Regds,
Vikram

Converting to Multi-Org in the middle of upgrade process from 11.5.10.2 to

Hi all,
We are in the process of Upgrade from EBS 11.5.10.2 to R12.1.1 (FA and GL modules only)
We have 10 Set of books
we are NOT multi-org enabled
we understand that we have to convert to Multi-Org for R12
Our problem is :
We did not define any Operating units till now:
1- After some analysis, we decided to create one legal entity and one operating unit FOR EACH set of book
2- So we will have 10 Set of books , 10 Legal entities and 10 Operating units
3- We should run Adadmin utility option "convert to Multiple Organization architecture"
In the document "Upgrade Guide - Release 11i to 12.1.1"
"Before running this step, you must define an operating unit and set the site–level AOL profile option MO: Operating Unit to use your new operating unit. This profile option tells adadmin what operating unit it should use when converting your existing data. If you define additional operating units, the seed data will be replicated for all operating units"
4- Which Operating unit of the 10 defined operating unites should be set in the site–level AOL profile option MO: Operating Unit ??
And what about the remaining 9 Operating units ? What about running the Adadmin utility option should we run it one time only ?
Thanks in advance
Mohamed F.

Hi Mohammed,
The requirement is to define at least one operating unit and set the profile option, "MO: Operating Unit" at Site level, to that Operating Unit's value
If you define more than one Operating Unit, the replicate seed data process is run for all Operating Units.
So you can set it to any operating unit and run adadmin.
Please refer to
FAQ - Multiple Organizations Architechure (Multi-Org) [ID 165042.1]
Thanks

Apps 11i SET_CLIENT_INFO in Multi-Org environment

How do you set the client info (dbms_application_info.set_client_info) in a portal session so reports have access to correct Operations ORG data in a multi-org environment

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Converting to Multi org

Hi All,
We have our production running on Oracle Applications 11.5.10.2 with 10g database, HRMS,payroll modules. We are planning for R12 upgrade and as a prerequisite we are analyzing about the multi org conversion. We are the medium size utility company operates on single location and time zone.
1. From the metalink document we understood that converting to multi org is mandatory for all customers(including hrms) planning to R12.
2. We would like to know the impact of converting to multi org on HRMS
3. The document 259546.1 says that there are scripts to create the lightweight operating unit and then running adadmin option would change the environment to multi org enables.
4. In our environment already hr organizations are defined and running for several years. As per the above statement do we need to run the script to create a new lightweight operating unit and run adadmin?. If so where can i find the script for creating the lightweight OU. We found the patch 5965493. But that patch is failed in our environment when executing funmodefou.sql
Can anyone please point us to a clear set of documents which explains the impact on HRMS and detail steps to convert to multi org.
I appreciate your help

1.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION1 like 'Operating Unit Information'
2.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION_CONTEXT like 'Operating Unit Information'
3. Select count(*) from hr_operating_units
count
0
4. SELECT O.BUSINESS_GROUP_ID , O.ORGANIZATION_ID , OTL.NAME , O.DATE_FROM , O.DATE_TO , O3.ORG_INFORMATION2 , O3.ORG_INFORMATION3 FROM HR_ALL_ORGANIZATION_UNITS O, HR_ALL_ORGANIZATION_UNITS_TL OTL, HR_ORGANIZATION_INFORMATION O2, HR_ORGANIZATION_INFORMATION O3 WHERE O.ORGANIZATION_ID = O2.ORGANIZATION_ID AND O.ORGANIZATION_ID = O3.ORGANIZATION_ID AND O2.ORG_INFORMATION_CONTEXT||'' = 'CLASS' AND O3.ORG_INFORMATION_CONTEXT = 'Operating Unit Information' AND O2.ORG_INFORMATION1 = 'OPERATING_UNIT' AND O2.ORG_INFORMATION2 = 'Y' AND O.ORGANIZATION_ID = OTL.ORGANIZATION_ID AND OTL.LANGUAGE = userenv('LANG')
returns 0 records

HOW CAN I GET MULTI-ORG IN APPS. 11I?

HI ALL
PLEASE I AM LOOKING TO GET MULTI-ORG INFORMATION
HELP ME PLEASE
THANK YOU IN ADVANCE

you can run concurent request that will tell you if mult-org enable or not or try the following conncet to your database as apps user and run the following
A. Run the SQL statement:
select multi_org_flag
from fnd_product_groups;
The result 'Y' means your database is setup for multiorg.
for more info check note ( Organization Setup Frequently Asked Questions - FAQ)
Note:109665.1
fadi

How to find whether the current BU in Apps is multi org or not??

I want to know that how we can find the status of multi org whether it is enabled or not?
Edited by: user13079708 on Jun 23, 2011 6:27 AM

Hi;
What is EBS version?
In R12.x its comes enable by default
In R11 Run the following SQL statement, if it returns 'Y', then your installation is Multi-Org:
SQL> select multi_org_flag from fnd_product_groups;
Regard
Helios

Order Entry -Price Lists - Multi-Org Installation - Security

Oracle Order Entry Technical Forum
Hi,
Ours is a multi_org installation in ver 11.0.3. We have 7 organizations. Each organizations has its own Price lists. Each organisation does not want other organizations to view their price lists. As any responsibility who has access to price lists can view all the price lists on the system Can somebody guide me how to achieve the above?
null

Oracle Order Entry is Multi-Org enabled. Can't you define responsibilities for each operating unit, and then link each responsibility to an operating unit using the profile option MO: Operating Unit (I believe this is the correct profile option. If not, there is one that you can use to perform this funtion.)
Once you do this, I believe that you can then effectively define a price list for each operating unit. Also, users will only be able to view and/or modify their own price lists.
Please let me know what the real solution is if this doesn't help.
Regards,
Roger

How to find out that one module is multi org or not?

Hi Friends,
Can any one tell me that how can we findout that one module is multi org or not?
Thanks in Advance.
Shravan Kumar Kota.

ORG_ID tends to be for Multiple Operating Units (ie Multi-Org)
ORGANIZATION_ID is not used for multiple operating units as far as I know - I am used to it being HR, Expenditure or Inventory organization related.

How to make Sales Person LOV org specific in case of Multi Org Setup

HI,
We are working on 11.5.10.2
We have a multi org setup and i am required to make the sales person LOV to populate only the org specific salespersons, at the sales order, quote, service contract levels.
Is it achiveable and if yes.....please letme know the way.
Reg,
Ajay Agarwal.

Hi
Try to play around with the security profile in the HRMS and attach it to the responsibility level
Regards
Ramesh Kumar S

ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

Purpose
Oracle Order Management - Version: 12.0 to 12.0
Information in this document applies to any platform.
R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
Solution
일반적인 MOAC Setup:
1. HRMS에서 Security Profile을 정의:
a. HRMS Management responsibility 선택
b. HRMS Manager> Security> Profile로 이동
c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
e. 저장
Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
2. MO Profile Options setup:
a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
Keep the MO profiles in sync:
MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
3. OM setup:
R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
Order Management Super User> Setup> System Parameters> Values
(See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
Sales Order and Order Organizer forms
Quick Sales order and Organizer forms
Sales Agreement forms
Pricing and Availability form
Other forms
Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
Reference
Note 393634.1

Hi Larry,
Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
Regards,
Gary
SQL Developer Team

Enabling multi org??

Similar Messages

Maybe you are looking for