Enabling OC Genie II from Control Center downgrades the CPU?!?! Z77A-GD65

Now I'm getting all the time more and more confused about this Z77A-GD65 with Intel i7 3770K over-clocking. I really hope that someone could help.
OK, there's a button on the motherboard that by enabling it the system automatically overclocks itself during the next boot. OK, fine. But what is that OC Genie II button in Control Center supposed to be? After enabling the OC button on mainboard and rebooting the CPU multiplier goes up from the default 35 to 42 and that's fine. But when enabling the OC Genie II overclocker from within Windows (from MSI Control Center) and rebooting, then the clock multiplier downgrades back to 35 ?!?!?! Why is that?
How is the Control Center supposed to be used for overclocking? Does it have a bug or something? At least it doesn't seem to work for me? Should the BIOS be reset to default values first or something? Should the OC Genie button on the motherboard be enabled at all?
However I would be happy to be able to automatically tune-up my system directly from Windows 7 (X64, SP1) but I don't know how to do it.
And why there's a button on the motherboard if the over-clocker is supposed to be working from within Control Center? Which one should I use and how? Moreover, should I have the main setting set (via reboot --> BIOS) set to STANDARD or OC GENIE II? I have so much trouble understanding all this..
PLEASE PLEASE HELP! Thank you friends.

Quote from: xmad on 26-September-12, 09:17:04
Go into bios and in the OC section, change "OC Genie Function Control" from By onboard button to "by bios option" see if that works better.
Also, most people don't use control center for more than monitering. I do all of my overclocking from UEFI/Bios and check on things in click bios II.
OK, thank you! That's exactly what I needed to know! So the Control Center's (within Windows) "Use OC Genie" shouldn't be used either? I suspect that this being enabled has got something to do with my poor ATI RADEON HD5770 performance. I'm currently experimenting it, don't know yet. But I will try disabling OC Genie from Control Center.
But should I disable the oc Genie button also on the motherboard itself? How would that affect things? Easier/harder to overclock the MB with OC Genie enabled? These current MB's are so damn complicated But I'd appreciate any help!

Similar Messages

  • I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

    I've found two bugs in iOS 7:
    1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
    2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

    We are all users here, just like you, but you can tell Apple about it by using this link:
    Apple - iPhone - Feedback

  • Audio Controls not working from Control Center.  iOS 7  7.0.1

    So my audio transport controls from control center don't work on my iphone 5C iOS 7.0.1
    Works on my iPad 3rd Gen and iPhone 4S.

    Me too. A complete restore didn't help at all, either. Doesn't control itunes, Pandora, nuthin.
    Also, my bluetooth controls in my car don't work, though music WILL play via bluetooth. Can't control from the steering wheel anymore.

  • Error while deploying objects from Control Center Manager

    I got the error "The Network Adapter could not establish the connection"
    while deploying my objects (dimensions, cubes, mappings etc) from Control Center Manager Oracle 10g R2.
    Any idea to ressolve it..........

    Some more details would be helpful ...

  • Cant able to change music from control center

    I am not able to change music from control center infact when the ipod is locked even then i am not able to change tracks,even pause and play not working this happed after i updated to ios 7....

    Can you play music from control center when your iPod is unlocked?
    Have you:
    Resetted your iPod?
    Restored your iPod?

  • Resuming podcasts or music from Control Center is buggy

    I listen to podcasts using Podcasts.app a lot in the car, and most of the time it resumes normally, especially if it hasn't been too long since I paused it. But intermittently it will kind of freak out and either not resume anything, or resume playing a random music track. From what I can tell, it is more likely to happen if the track data is empty when I pull up the Control Center. If the track info is blank when I pull it up, it is pretty much a toss-up about what it will play back. If it plays the wrong thing back, I have to go back into the Podcasts app and restart the track.
    This actually happened to me with the Podcasts.app in iOS 6 on my 4S as well, and as a result I deleted it and never used it. With my 5S and iOS 7 that is no longer an option.
    Anyone have any experience with this issue?

    Can you play music from control center when your iPod is unlocked?
    Have you:
    Resetted your iPod?
    Restored your iPod?

  • Unable to open the Projects from Project center with the Alias name PWA 2010

    Hi,
    I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is  project server 2010,
    My system is ABC.DC.IN  alias name i have given is DEF.AD.COM  
    With the system name i can able access PWA and all are working fine.
    As i have observed with alias name i can able to login to  pwa and all the server  setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
    is coming in the below of the ie. 
    But with Alias name these are the issues i am facing,
    1.when longing with alias name its asking two times for user name and password
    2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
    3. I have observed one more thing if click on Project details then only this issue  is coming project schedule and project information is also opening with Alias name.
    can any one Help me. 
    Vijay kommireddi

    Hi
    Hope the below link will help you.
    And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

  • Can you see ink levels from Eprint center for the OfficeJet 7500A/E910

    Can You monitor ink levels from eprint center for the OfficeJet 7500A/E910?
    This question was solved.
    View Solution.

    Hello Raimonds,
    To answer your question, you are not able to check your ink levels from ePrint Center. The only thing that you can do in ePrint Center is monitor the status of your recent print jobs that you send via ePrint and monitor the status of connection of your printer to the ePrint Servers.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Dear All, I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me. Thanks Vijay

    Dear All,
                         I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
    Thanks
    Vijay

    Hi Vijay,
    If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you 
    HTH,

  • MSI P67A-C45 problems after OC Genie in MSI Control Center

    Hi ,everyone! Yesterday i try press OC Genie button in MSI Control Center 2 and after reboot my computer hangs, video not initializing,
    i think motherboard working fine, but problems with BIOS. I tried clear cmos by pressing button on motherboard, but situation not changed.
    I,m also took two strips of memory from the motherboard, and boot, after it issued two beeps.
    My system configuration
    MSI P67A-C45
    BIOS 1.13
    i5 2500
    Samsung Original 1333 CL9 2 x 4GB
    WD Caviar Green 2TB
    Powercolor Radeon 6950
    Chieftec 600W
    I think MSI Contol Center OC Genie section have bugs!!!
    Please help!!!
    Thanks for reading.  Sorry for my English.

    I had similar problems. I resolved them removing all pci cards and battery also. Turn pc on without any cards on pci slots until windows boots.
    Don't forget to adjust your system time. When windows boot normally I shut down the computer and put all the cards on pci slots. That procedure resolve my problems.
    I suspect of the version of my bios. Recently I upgrade my bios version to the 1.E version avaiable on the MSI site.
    I hope that you can fix your problem.
    Sorry for my bad english. I'm portuguese

  • X79A-GD65 (8D) OC Genie II on Control Center

    Hi,
    I have successfully activated "OC Genie mode" via software using the Control Center 2.2.082.
    Everything is OK, but I have a question:
    why does the blue button/icon say "enable" when OC Genie is "enableD" (with the "D") and vice versa?
    The icon represents the real physical button on the MB, right?
    So, solution 1, the text explains what happens if i click on it:
      OC not active -> "Enable"
      OC active -> "Disable"
    Or solution 2, the text explains the current situation:
      OC not active -> "DisableD"
      OC active -> "EnableD"
    Thank you for your help!
    ric

      D? Sounds like just a cosmetic spelling error to me.

  • Start Button from Control Center Manager OWB 10.2.0.3.33

    Hi Folks,
    the start Button from the Control Center Manager is grey and I cannot run drop, replace, etc. jobs. I've tried with the owb owner with the same result. The Service is running. I also restart the data base but again the same result. Any ideas...?
    Thanks
    Pavel

    Please forgive the simple first question:
    Have you deployed these objects yet?

  • Hide/Remove iTunes from control center in iOS 7?

    How do you hide/remove the iTunes controls from the control center in iOS 7 for the iPhone?
    I almost never use the music on my phone, and dislike how much space the blank controls take up.

    You cannot change things in control center.
    For more information about control center:
    http://support.apple.com/kb/HT5858

  • How to remove scheduled jobs from Control Center?

    Hi,
    My control center shows a bunch of jobs in the "scheduled" tab that no longer exist.
    They do not exist in Control Center and they also do not exist in the Design Center anymore.
    Is there a way I can delete entries from the list of schedule jobs?
    I am on OWB 10gR2
    Thanks,
    Sam
    PS, I saw this thread that talks about my problem. However the solution provided seems to only work if the jobs still exist
    in your control and design centers.
    OWB 11g  Control Centre, Want to Remove Schedule Jobs list

    Could it be that some process flows are still attached to a schedule? Perhaps you've made a copy of a Process Flow?

  • Turn off cellular from control center?

    Hi,
    I\m considering getting one of the new iPads, and right now the choice is between ordinary WiFi and the 3G models.
    What I need to know is whether it's possible to quickly turn cellular/3G off via control center? I will not have need for constant cellular access, the way I do on my iPhone, so I want to be able to turn cellular on and off quickly.
    Thanks.

    Welcome to the Apple Support Communities
    If you want, you can disable the IR port in order to be able to stop control your computer with the Apple Remote. To do it, open System Preferences > Security & Privacy > General > Advanced, and mark "Disable remote control infrared receiver"

Maybe you are looking for

  • I keep loosing Home sharing on my Iphone/Ipod/Ipad

    I have to keep stopping and starting home sharing on Itunes and it keeps dropping off my list of available music. Added UDP and TCP port 3689 and 5353 to my router as I read in a forum. Firewall allows Itunes so not sure what is required to keep shar

  • Bluetooth drivers driver for lion 10.7 OSX

    I deleted my blue tooth drivers on accident and my key board and bluetooth device want work How do I reinstall the driver for lion 10.7 OSX?

  • Mail Recovered Messages

    Recently attempted to send an email with attachment in Mail. It was rejected as too large. Now it appears in Recovered Messages in "On My Mac", every time I try to delete it a duplicate appears in Recovered Message. How can I get rid of this?

  • Why does this behavior go untouched?

    I was recently on twitter, and I noticed a Professional photographer, who has shot covers for dozens of magazines and is considered to be one of the big names in band and music photography, was asking for a keygen for CS5 PUBLICALLY.  Now I'm just cu

  • How to add the zorin os and domain server 2008

    Since Zorin is just a flavour of Ubuntu you should be able to use any of the guides for adding Ubuntu to Active Directory. You can use Samba, Winbind, LikewiseOpen or another package to add it. Here is some more information: http://askubuntu.com/ques