Enabling Password controls in the Default Profile

After sharing with customer metalink note 114930.1, customer has the following questions:
1. Will Oracle suggest enabling password controls in the profile "Default" that is created during the installation without those controls enabled?
2. Oracle accounts (SYS, SYSTEM etc.) are created with the default profile associated with them (at that time there are no manually created profiles). Does Oracle permit assigning other profiles (created after installation) to those most critical accounts
Any help/direction is much appreciated

Hi,
1/ I don't know if Oracle would suggest that, but I would either enable password control if you have such a requirement, wherever you set it up, or don't touch anything if it's just to leave it disabled... I usually create specific profiles for the users and set up the limits according to the kind/type of users they are.
2/ Don't you have no test instance?
TEST> create profile p limit failed_login_attempts 5;
Profil cr�
TEST> alter user sys profile p;
Utilisateur modifi
TEST> alter user system profile p;
Utilisateur modifi
TEST> select username, profile from dba_users where username in ('SYS','SYSTEM');
USERNAME                       PROFILE
SYS                            P
SYSTEM                         PMy 2cp,
Yoann.

Similar Messages

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

How to change the theme in the default profile so new users get a different theme

How can I change the theme (background picture, etc) for the default profile, so that when new users log in and get a new profile created, they get a different theme than the one they currently receive?

Hi,
If you want to get a different theme for new users, based on my understanding, it’s not easy, we can load the specific theme for all user because we can control OS to load this specific theme file.
The default location of theme file is:
C:\Windows\Resources\Themes
To configure OS load different theme for different user, I think this cannot be controlled by a registry key. It’s complicated to make OS choose different theme pack for different user, even more, the theme pack files are limited.
Here is some different but similar discussion about changing theme programmatically:
How do I change the current Windows theme programatically?
http://stackoverflow.com/questions/546818/how-do-i-change-the-current-windows-theme-programatically
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Impersonate User: Mimic another user similar to the Default Profile

I'm looking for a way as an Administrator to impersonate another user similar to the way you can login to the portal using the Default Profiles.
Example: I select a user to impersonate and then click a button. I'm then in the portal as that user.
There may be a problem opening documents, etc, but I'm more interested in making sure that I see the content that the other person is seeing.
It would be a great help to diagnose security problems such as "Why can't I see this portlet, etc."
One solution I thought of was to switch ID's in the PTUSERS table. This solution wouldnt' want to go any further than dev though. I don't really like this solution because if you forget to switch them back or they are in the portal when you switch them......there's a problem.

I think that changing the PTUsers table is unlikely to do what you want. It's likely to break the system because there are a number of other tables that contain data about users, and you have not changed those tables. Additionally, information may be cached in memory, so changing the tables would not change that information.
I think that there is a significantly easier way to do this, though it may still not be easy. The IPTSession interface supports a function called ImpersonateUser. If you are logged into the Portal as an Administrator, you can call ImpersonateUser to switch your session over to that of another user- from then on, the Server will treat you as the second user.
This is a very easy call to make, but it's only half the story- the UI also has to know to treat you as the new user (e.g. use the correct language settings, flush cached session info, etc.) This is basically like doing a login. I don't know the details of how this would be done (a discussion forum about UI customization would be more useful here), but I could imagine doing something like copying the login screen logic to a second, "hidden" login screen which takes in a username, but no password. The page would only operate if you were already logged in as an Administrator, but it would perform the "standard" login logic, except that it would do Session.ImpersonateUser on the pre-existing session instead of creating a new session and logging in as the new user.

How to alter the default profile for multiple users

I am trying to alter the default profile assigned to users during user creation to a new profile. I know to change the profile for one user using the syntax
alter user abc profile profileabc
The issue I have is that there are 100's of users under default profile and changing for each of them manually would be difficult. The approach that I see is to write a shell script where I connect to the db and get a list of all the users with default profile. Then I loop through the file making connection to the db each time and executing the alter statement.
Please help if you think that there can be a more efficient approach to this.
Thanks

alter user abc profile profileabcspool newsql.sql
select 'ALTER USER '|| USERNAME || ' PROFILE NEWPROFILE;' FROM DBA_USERS;
SPOOL OFF
@newsql.sql

How do we change the default profile folder location?

I work for a university in Manhattan. We are trying to install Firefox 5 for our users but Firefox profiles are stored in the AppData folder which is a problem for us as it exceeds the user profile space.
We need a way to have Firefox create the profile elsewhere. Is anyone aware of how to do this?

Hi,
Thank you for taking the time to offer a solution to our problem. Unfortunately, the Firefox profile information set under the administrative account does not transfer to the user accounts. Even though we created a Firefox profile set to open to a different location, when a user logs in the default profile, located in AppData, is created for them and they do not have access to the new one.
Are you aware of any way to set the profile of each user to automatically be created elsewhere? Thank you.

How does the Default profile works?

we are using MSCS cluster.
On last week, I found SAPGLOBALHOST and SAPDBHOST are pointed to wrong server in default.pfl in
<CLUSTER>\SAPMNT\PRD\SYS\profile. I changed both parameter to currently server name and restart service. Therefore, we lost zcsa/installed_languages parameter in PRD_DVEBMGS01_<CI_SERVER> file. I have to add this parameter again in RZ10.
My question is:
Why SAP can start up correctly when the SAPGLOBALHOST and SAPDBHOST were wrong ? I don't think anybody changed this parameter without notice.
Where is the old zcsa/installed_languages parameter stored? I searched all servers, I couldn't find this parameter.
Thank you

Check SAPGLOBALHOST and SAPDBHOST parameters in Instance profile. If the values in the instance profile is correct it will override the default profile values. Also check the environmental variables like DB_HOST etc.
When you change the value of zcsa/installed_languages didn't save it as a new version?If you save as a new version then go to profile directory and check DEFAULT.PFL.<n>

CG36 - No virus scan profile is selected as the "default profile"

When running transaction CG36 - Import Reports, I'm getting this message in the job log:
"No virus scan profile is selected as the "default profile" VSCAN 034 I"
Do I have to set up a default profile for virus scan? I have never seen this error until recent upgrade. Is there a way to by pass this virus scan if we choose not to activate it?
Thanks!

I encountered the same problem during the CG36 transaction.
"Error during virus scan in file "...\usr\sap\.....\xixoxoxioxo.pdf" with Message class "CM_REPORT_IMP_EXP" 010 E
Job cancelled after system exception ERROR_MESSAGE.
This may be due to BASIS security level virus scan checks on the files being imported to the application server. Is BASIS assistance required on this or any workaround to bypass?
Thank you.

Only the default profile and still cannot reset browser

I am running the new Windows 8.1 and just re-installed Waterfox 27. The browser keeps informing me that it is running slowly. The links send me to nowhere because my profile apparently doesn't show the reset button in Help / troubleshooting. The only profile I can locate indicates it is the default profile. This profile only has an alpha-numeric name that was self generated at some point.
I was using Waterfox on a previous Laptop using Win7x64 Ultimate I owned, it has sense died. This new Lenovo unit was installed with Windows 8, I allowed the upgrade to 8.1.Operates with an Intel(R) Core(TM) i5-4200U CPU @ 1600GHz 2.30GHz, 64-bit Operating System, x64-based processor.
Waterfox has installed itself in the "C:\Program Files\Waterfox\waterfox.exe" folders. I have done an un-install, a reinstall, of your browser.

Try to use the Profile Manager to start Firefox/Waterfox with this default profile.<br />
You only see the Reset button if Firefox is started with the profile that is marked as Default=1 in the profiles.ini file.
*http://kb.mozillazine.org/Profile_Manager

Accidently deleted the default profile-wher to find old bookmarks to restore?

I accidentally deleted the default profile while try to delete a username for a website, which was memorized by Firefox. On a Mac OSX, where do I find the bookmarks file that was in use before deleting the default profile. I have to restore the bookmarks or at the minimum, gat a list of those with their url so that I can make new.

You are on Mac OS X 10.4, so you do not have the Time Machine that more recent versions have. If you did remove the entire [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and do not have a backup of that folder then all your personal data including the bookmarks is gone.
/Users/<user>/Library/Application Support/Firefox/Profiles/<profile>/

Where is the default profile in Firefox copied from under Linux?

I'm trying to change a default setting in Firefox 3.6.6 under OpenSUSE 11.3. I need to disable network.dns.disableIPv6 globally for all users in their default profile. I cannot figure out where the file is that the default profiles are created from. Can anyone point me to this?

If you use a Firefox version from the OpenSUSE repositories then you probably find that template folder in the corresponding /usr/lib/xulrunner-xxx folder.
* /usr/lib/xulrunner-1.9.2.6/defaults/profile
If you've installed Firefox yourself then look for the Firefox installation folder.
Be aware that Firefox 3.6.6 is really old and outdated and you should at least update to the latest 3.6.27 version to get all security patches

Changing the default profile

Is there a way to change the default profile that is assigned to new users? In other words, instead of user JONES being assigned DEFAULT if no profile is specifed in the create user statement, I want to set up the database so that MY_PROFILE is the profile that is defaulted to instead? This is in Oracle9i R2.

Hi,
Yesterday, there was a thread with the same subject, and it seems that you can (thanks to Yoann) :
Can I alter the default profile
Nicolas.

Is there a way to programatically switch a control from the default style to the system style

I was wondering if there was any way to conditionally make a control look like either the default control style or the system control style. The front panel that contained the control would not be running. I'm running Labview 8.0. One possisble way I'm thinking of is changing the type descriptor but I'm not sure how to write to it (I can read it from the 7.x flatten to string function). Another way I'm thinking is maybe changing or applying a typedef but I'm not sure if that's possible either.
CLD (2014)

" ... If the user wants to pursue this method then it will work, but be prepared to deal with more work than you'd expect."...
My sentiments, exactly. There may come a day when I need to spend an afternoon making one really cool control ... but I don't see it happening anytime soon.
Message Edited by PaulG. on 05-17-2007 05:04 PM
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

How can i change the default profile location to another directory or environment variable?

Hi,
I need to move where Mozilla Firefox creates its profiles. it currently creates in AppData\Local\Mozilla... normally that is ok. In my network unfortunately AppData\Local is synchronised using Citrix Profile Management tools. the size of the Firefox profile whilst only several meg causes slow login times for my customers. So we currently have folder re-direction enabled and we would like to move the Firefox profile to a directory within documents i.e. %USERNAME%\documents.
I have found some ADM templates on the internet however, they have not had enough options including the VBS files i spotted that they are for a very old version. i have tried to find the correct location in the registry under HKLM\software\policys\Mozilla however this does not exist.
We are using Windows 7 and Windows Server 2008 R2.
Mixed Versions of Firefox used but for sake of arguments version 28.
If someone could help that would be much appreciated.
Kind regards,
David Coates

http://kb.mozillazine.org/Moving_your_profile_folder
To start Profile Manager, Winkey-R and type firefox.exe -p

Firefox crashes after creating the default profile

Hi,
I'm using firefox in HP-UX 11.11. I see that when I open the
firefox for the first time and create a default profile the
firefox crashes with the following messages
LoadPlugin: failed to initialize shared library libXt.sl
[Can't open shared library: libXt.sl]
LoadPlugin: failed to initialize shared library libXext.sl
[Can't open shared library: libXext.sl]
LoadPlugin: failed to initialize shared library libXm.sl
[Can't open shared library: libXm.sl]
What I'm missing?
When do we get the above errors.

Go to '''about:crashes''' in the address bar and copy and paste your crash reports here and I will determine what the problem is and what is causing Firefox to crash.

Enabling Password controls in the Default Profile

Similar Messages

Maybe you are looking for