Enabling the wiki service for a group not working
Hey all,
I am getting my server up and running and I have the following services: AFP, DNS, and Web. I am currently trying to enable the use of a Wiki but am running into some problems. I have enabled Wiki and blog in the Web Services in Server Admin and I have added the groups I wish to be able to use the Wiki. When I go to Workgroup Manager, I get stuck. In the Accounts tab and the group I am trying to give access to, I attempt to use the pulldown tab to "Enable the following serves for this group on:" I would like to get the pulldown to be set on "Default web site of server17.pretendco.com, but I cannot even use the pulldown. It is grayed over, and I cannot change the settings.
I am using the Administrator account, so I should be able to change that. Any ideas?
Thanks
Pat
Hi
The reason the option is grayed out for your users is because your server is not an OD Master. Wiki, Blog and iCal won't be available unless this happens first.
Page 61 Web Technologies Admin Manual
Wiki will not work without a local Open Directory master. Your server can be connected
to another directory server simultaneously, but for wiki to work, your server must be an
Open Directory master. For more information, see Open Directory Administration.
You can download the relevant manuals from here:
http://images.apple.com/server/macosx/docs/WebTechnologies_Adminv10.5.pdf
http://images.apple.com/server/macosx/docs/OpenDirectory_Admin_v10.5_2ndEd.pdf
Other manuals may also be of use:
http://www.apple.com/server/macosx/resources/
Open Directory requires a tested and configured Internal DNS Service resolving on the forward and reverse lookups. DNS does not need to be running on the server itself just as long as it is running on a server on the same network. Don't confuse internal DNS Services with the external ones you are used to.
Tony
Similar Messages
-
Wiki has no groups: 'Enable the following services for this group' is None
Our Leopard Server is an OD Master and have followed the Wiki setup procedure detailed in the Web Services Overview PDF. Believe I have got that part configured correctly and am able to access the web/wiki frontend on our Intranet.
Issue is that I am unable to get any groups to be available on the Wiki and therefore cannot actually do anything.
I believe it is an issue with the 'Enable the following services for this group' setting as it always displays None.
I have read various posts/discussions but am no wiser as to the issue.
Sorry if this is a noob question, any help gratefully received.
MattYour not alone, I have this exact same problem.
I'm running a fully working BIND 9 and OD Master, so that's not your issue. My groups are without a doubt in the /LDAPv3/127.0.0.1 domain.
When I connect with Directory.app, all services are grayed out and cannot be enabled. If I attempt to enable them in WGM they appear to apply when I hit save, but if I focus another group and come back it says (None).
My logs are below:
Jul 8 17:01:48 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:01:48 airto servermgrd[92]: servermgr_web: Teams service started
Jul 8 17:01:52 airto com.apple.wikid[3816]: Removing stale pidfile /var/run/wikid.pid
Jul 8 17:05:58 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:06:00 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.001849 seconds!
Jul 8 17:06:15 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
Jul 8 17:06:16 airto servermgrd[92]: servermgr_web: Teams service started
Jul 8 17:06:18 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.003159 seconds!
Jul 8 17:06:19 airto com.apple.wikid[4222]: Removing stale pidfile /var/run/wikid.pid
Jul 8 17:06:51 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:06:53 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.001768 seconds!
Jul 8 17:07:04 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
Jul 8 17:07:05 airto servermgrd[92]: servermgr_web: Teams service started
Jul 8 17:07:07 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.003067 seconds!
Jul 8 17:07:07 airto com.apple.wikid[4238]: Removing stale pidfile /var/run/wikid.pid
Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: htcleancache disabled
Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: Multi instance key 'SSLLog' has a single value=''!
Jul 8 17:13:50: --- last message repeated 2 times ---
Jul 8 17:13:50 airto servermgrd[92]: servermgr_web: Multi instance key 'Weblogs' has a single value='{\n enabled = 0;\n}'!
Jul 8 17:13:51 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:14:03 airto servermgrd[92]: servermgr_calendar: created default calendar virtual host
Jul 8 17:14:08 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:14:10 airto servermgrd[92]: TIME-CHECK: NSLXStandardDeregisterService took 2.005470 seconds!
Jul 8 17:14:13 airto com.apple.launchd[1] (org.apache.httpd): Unknown key: SHAuthorizationRight
Jul 8 17:14:16 airto servermgrd[92]: TIME-CHECK: NSLXStandardRegisterService took 2.029467 seconds!
Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: htcleancache disabled
Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Multi instance key 'SSLLog' has a single value=''!
Jul 8 17:14:23: --- last message repeated 2 times ---
Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Multi instance key 'Weblogs' has a single value='{\n enabled = 0;\n}'!
Jul 8 17:14:23 airto servermgrd[92]: servermgr_web: Teams service started
Jul 8 17:14:28 airto com.apple.wikid[4383]: Removing stale pidfile /var/run/wikid.pid
Jul 8 17:14:32 airto servermgrd[92]: servermgr_web: htcleancache disabled
Jul 8 17:14:33 airto servermgrd[92]: servermgr_web: Teams service stopped
Jul 8 17:14:33 airto servermgrd[92]: servermgr_web: Teams service started
Jul 8 17:14:37 airto com.apple.wikid[4409]: Removing stale pidfile /var/run/wikid.pid
Jul 8 17:28:07 airto ipfw[189]: limit 1000 reached on entry 12306 -
Issue ( Enable the following services for this group on : ( None ), .....
I have found other topics about this, but they all say the issue is due to not running Open Directory in Master, but I am. I was wondering if there might be another reason due to why this has no options, because I would like to enable the wiki, but I have figure out that I can't until I some how get this option enabled to select wiki and blog.
What else is there to fill out on the general tab?
http://evilx.devel.ws/osx/Picture%203.png
http://evilx.devel.ws/osx/Picture%204.png
http://evilx.devel.ws/osx/Picture%205.png
http://evilx.devel.ws/osx/Picture%206.png
http://evilx.devel.ws/osx/Picture%207.png
http://evilx.devel.ws/osx/Picture%208.png
http://evilx.devel.ws/osx/Picture%209.png
http://evilx.devel.ws/osx/Picture%2010.png -
Enable the following services for this group on: Resets itself
We have integrated OSX & active directory.
Everything seems to be working fine, active dir users can log on to OSX 10.5.5
The WIKI & Blog is the only issue. It doesnt authenticate. We have patched, but nothing new happened.
I have noticed banging my head against WGM that when i make a LDAP group > add a AD user into that LDAP group and try and enable the right server, select wiki and blog and click save. When i go to another group and then go back to the wiki enabled group, its reset to (none)?
Anyone got any ideas? This is the only part of our integration that is slowed us down.
cheers
JamesOk, i have rebooted and it seems to be enabled, sounds like i might have been logged into an account that couldnt save?
I still cant get AD users to authenticate on the BLOGS service? -
Content enrichment service for SP 2013 not working
Content enrichment service for SP 2013 not working
Not able to debug content enrichment service.. Can you please specify the steps for debugging the content enrichment service
Any help will be greatly appreciated.
Regards
BKPA
BKPAHi ,
Please see the following articles, run and debug service with breakpoints using F5 from VS, then register the custom content enrichment service with DebugMode and long Timeout to SharePoint, then start a full crawl to call the web service.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2014/04/08/how-to-use-the-sharepoint-2013-content-enrichment-web-service.aspx
http://www.jeanpaulva.com/index.php/2014/05/21/content-enrichment-web-service/
http://msdn.microsoft.com/en-us/library/office/jj163968(v=office.15).aspx#content_enrichment_configuration
http://www.blendmaster.net/blog/2012/09/using-content-enrichment-web-service-callout-in-sharepoint-2013-preview/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
HT204003 What can I do if the "date" fix for passbook is not working? Are there any other solutions?
I have tried the "date" fix but it does not work for me. Does anyone have any other solution for the passbook problem?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
Is it possible to enable the Web Services for eprint on the CP1025nw
I am using the HP Laserjet CP1025nw
It is connected to a wired network with a fixed IP address.
I am using Windows 7 64bit
When I click enable to complete the Web Services setup - it fails telling me to check the internet connection.
The internet is working fine and all other aspects of the printer are working so how do I complete this setup??
Any suggestions please?
Thanks John
This question was solved.
View Solution.Hi John,
I suggest starting over and following the instructions.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Port forwarding for the Web server for outside Internet (not working , help!!!!!!)
Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- --- -
Tape Compression for Protection Groups Not Working
Hi everyone,
We've since started using DPM 2012 R2 to backup our systems. Everything is working except for tape compression. I've read some other discussions regarding similar issues, but none have been of any help to me.
DPM (version 4.2.1254.0) is running on a physical server (HP BL460c G6) running Windows Server 2008 R2 Enterprise SP1. Microsoft SQL Server 2008 R2 is also running on the same machine providing the database for DPM. Other roles installed: Hyper-V, WDS,
WSUS, IIS, and File Services. The tape drive is an HP StorageWorks SB1760c which is partnered to the blade server in a C3000 chassis. Tapes are LTO-4. Everything is fully patched from Windows Updates.
The backup starts off fine, but because the tape drive is a not an auto-loader, the backup fails because it is waiting for a new tape to be inserted so it can complete the backup. If DPM would compress the data, it will all fit on the one tape.
So far, I've:
Reinstalled the operating system and all the server roles on it (twice!).
Used HP's Library and Tape Tools to perform a tape compression test (which passes - the results did show that the data written during the test was compressed).
Reviewed other similar discussions.
None of which have been of any use. To start off, I would like to look at the logs produced during the backup to see if there is anything useful in them. Can someone please direct me to where they may be?
Any help with this problem would be greatly appreciated. I quite like DPM over the competition, it's just this one problem causing me grief.Hi
You can enable DPM Verbose logging, then manually start a tape backup of a datasource that is in a protection group that has tape compression option checked. Once the backup starts writing data to the drive, you can open a command prompt and CD to
the DPM log location and run the following command.
Find /i "TapeInfo DriveAccessPath=" msdpm*.errlog
It should show that the MTASetMedia command set the block size to 65536, and HWcompression to true on the drive we're writing to.
[Example showing HWCompression was set to true]
VERBOSE <TapeInfo DriveAccessPath="\\.\Tape2147483645" PhysicalBlockSize="65536"
HWCompression="true" xmlns="http://schemas.microsoft.com/2003/dls/MediaManager/StorageXMLSchema.xsd" />
VERBOSE CMTATapeInfo::InitializeFromDOM => m_ssDrivePath = [\\.\Tape2147483645] m_dwPhysicalBlockSize = [65536]
m_bHWCompression = [1]
If you see that, then DPM did it's job and it's up to the tape drive to honor the request and compress data as written.
If you keep the verbose logging on for the duration of the tape backup jobs, it should detail switching tapes as well, so you can take a look and see if you can figure out why we changed media when we did. If you search for "EOM hit: 1"
that means we hit end of media.
To enable full VERBOSE logging, under HKLM\Software\Microsoft\Microsoft Data Protection Manager, add a DWORD value named TraceLogLevel and set it to 0x43e, then stop and restart the msdpm and dpmra services. The DPM log files will now contain
MUCH MORE logging to help troubleshoot issues without requiring a DPM trace.
DPM 2010 or upgrade to DPM 2012 the Logs are in the C:\program files\Microsoft DPM\DPM\temp folder
DPM 2012 (clean install) logs are in the C:\program Files\System Center 2012\DPM\DPM\temp folder.
After you reproduce the problem, be sure delete or rename the TraceLogLevel registry setting and restart the DPM services so normal (non-Verbose) logging resumes.
SAMPLE OUTPUT DPM2012 SP1
C:\Program Files\Microsoft DPM\DPM\Temp>find /i "tapeinfo" *.errlog
---------- DPMRA56.ERRLOG
165C 0C80 06/14 16:32:26.771 05 defaultsubtask.cpp(527) [0000000000370750] 40292CEC-FBEE-4D6A-9763-031FB711A480 VERBOSE
<TapeInfo DriveAccessPath="\\.\Tape2147483645" PhysicalBlockSize="65536"
HWCompression="true" xmlns="http://schemas.microsoft.com/2003/dls/MediaManager/StorageXMLSchema.xsd" />
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(28) [0000000003F77AA0] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE ==>CMTATapeInfo::CMTATapeInfo
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(28) [0000000003F77AA0] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE <--CMTATapeInfo::CMTATapeInfo
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(68) [0000000003F77AA0] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE CMTATapeInfo::InitializeFromDOM => m_ssDrivePath = [\\.\Tape2147483645] m_dwPhysicalBlockSize = [65536]
m_bHWCompression = [1]
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(42) [0000000001F2F340] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE ==>CMTATapeInfo::~CMTATapeInfo
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(42) [0000000001F2F340] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE <--CMTATapeInfo::~CMTATapeInfo
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(42) [0000000003F77AA0] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE ==>CMTATapeInfo::~CMTATapeInfo
165C 0C80 06/14 16:32:26.771 29 mtastoragexml.cpp(42) [0000000003F77AA0] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE <--CMTATapeInfo::~CMTATapeInfo
---------- MSDPMCURR.ERRLOG
18DC 1B80 06/14 16:32:26.756 01 TaskInstance.cs(1034) 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE <TapeInfo DriveAccessPath="\\.\Tape2147483645" PhysicalBlockSize="
65536" HWCompression="true" xmlns="http://schemas.microsoft.com/2003/dls/MediaManager/StorageXMLSchema.xsd" />
18DC 0574 06/14 16:32:26.756 04 cmdproc.cpp(2432) [0000000003B8A470] 40292CEC-FBEE-4D6A-9763-031FB711A480
VERBOSE <TapeInfo DriveAccessPath="\\.\Tape2147483645" PhysicalBlockSize="65536" HWCompression="true"
xmlns="http://schemas.microsoft.com/2003/dls/MediaManager/StorageXMLSchema.xsd" />
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
The Web Agent for IIS will not work
Environment: NT4 Server, IIS4
I try to install the Web Agent in use with IIS but IIS fails to load the dll. After the installation I can read the event-log :
The HTTP server was unable to load the ISAPI Application 'C:\Oracle\Ora81\ord\web\bin\wsciis81.dll'. The data is the error.
And the Browser gives me:
A dynamic link library (DLL) initialization routine failed.
What can be wrong?Note: On Windows NT, use \ instead of / to separate file system directory
paths.
1. Check the Web Agent's log file.
Look in <oracle_home>/ord/web/logs for a log file in the form
wsc_<yyyymmdd>_<pid>.log. If the file exists, review it for errors,
then take the necessary action to remedy the problem. Possible
problems that might be logged are non-recoverable errors in the Web
Agent's configuration file <oracle_home>/ord/web/admin/wsc.cfg. If the
configuration file or the <oracle_home>/ord/web directory hierarchy
doesn't exist, then re-do the installation.
2. Check the Web Agent's "last-chance" error log file.
If the <oracle_home>/ord/web/logs directory exists, but there are no
log files, check in the %SystemRoot% directory on Windows NT or the
/tmp directory on Unix for a file named wsclstch.err. This is the Web
Agent's "last-chance" error log file. The Web Agent will try to write
to this file if it encounters a fundamental startup error, such as a
problem initializing CORE or NLS, creating a log file, or opening its
message file. If the file exists, review it for errors, then take the
necessary action to remedy the problem. (In a command window on
Windows NT, type set SystemRoot to find where the wsclstch.err file
would be written.)
3. Check the web server configuration.
If the Web Agent failed to create either its normal log file or its
"last-chance" error log file, verify that the Web Agent has been
configured correctly for the particular web server being used and that
the web server is running.
o Microsoft IIS
Use the Internet Service Manager to verify that IIS has been
configured correctly for the Web Agent. Review the installation
and configuration instructions in the wsciis.html or wsciis.txt
files to verify that the Web Agent has been configured correctly
and to make any changes or fixes necessary. Check that the filter
is up and running and that the virtual path has been configured.
To check the filter, select the web site, then click the
properties button (or right-click the web site icon). Select the
Filters tab. The Web Agent should appear in the list with a green
up-arrow. If it appears with a red down-arrow, check the Windows
NT event log for any errors relating to the Web Agent. IIS
doesn't always write detailed error messages. For example, if a
DLL used by the Web Agent can't be located, then IIS typically
logs the fact that a load error occurred along with the message
"the data was the error". Note that the installation and
configuration instructions describe the case where the filter
must be installed manually if there were no existing filters
registered at the time the Web Agent for IIS was installed.
If the filter looks OK, check the oracle_intermedia_bin virtual
path by clicking the properties button (or right-click the
virtual path icon). The path should reference the
<oracle-home>\ord\web\bin directory, which should contain the
wsciis81.dll file. In the properties window, select the directory
security tab, then click the anonymous access and authentication
control button. Verify that Basic authentication has been checked
and that Windows NT challenge/response has been cleared.
To function correctly, the Oracle8i home must be specified
correctly for IIS. Use the Oracle Home Selector to verify that
the Oracle8i home is specified as the default home. Use the
System Control Panel to verify that the Oracle8i home /bin
directory is specified prior to any other Oracle homes in the
PATH environment variable.
null -
The minimize function for Chrome is not working
Hello everyone,
since yesterday the yellow round icon (which allows you to minimize the window) on Google Chrome it turned grey and it's not working anymore. Also all the other ways to minimize windows are not working.
This is happening only with Chrome, and when I'm working with it the dock disappear...
How do I restore the minimize function for Chrome?
Thank you,
SilviaI'm using 10.7.2. When I highlight some words, the highlight turns into a colored oval! The PDF file is from a vendor.
-
OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
Looks like the simple part is using it - just press and hold the digit to dial the whole number.
So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)Seemed like there should be a speed dial, so I did a search & found the cure is worse than the disease -
Dial from your phone
Make calls directly from your existing touch-tone home phone:
Local calls: Dial the 7- or 10-digit phone number.
Long distance calls: Dial 1 + area code + 7-digit phone number.
International calls: Dial 011 + country code + 7-digit phone number.
Dial online from your myAT&T account
Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
Log in to myAT&T. Don't have a myAT&T login? Register today!
From the I want to menu, select Manage my plans and services and then Manage my phone features.
Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
Enter a number to dial or select a number from your Call History or Address Book.
Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
Select Place Call.
When your home phone rings, pick it up to place your call.
Important Note
To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
Dial from your U-verse TV
With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
Tune to Channel 9900 using your U-verse TV remote.
Select a U-verse Voice phone number on screen.
Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
Scroll using the arrows.
Select a number and press OK to return a call.
Select Call and press OK.
When your home phone rings, pick it up to place your call.
You can have a call list accesed from a browser.
You can call back a historical call from the browser or TV.
https://www.att.com/esupport/article.jsp?sid=KB401002 -
Before i make update the auto brightness was working properly
The screen was very low bright in the dark automatically and high bright in light
But now after i made update it is nit working
I am surprised that apple system is not stable
Please support
<Email Edited By Host>This is a user to user support forum and not Apple employees so it is best to not post your email address in an open discussion group.
Have you tried a reboot of the iPhone? Hold both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears.
My iPhone went to full brightness all the time after updating to iOS 6.1.3. A reboot seems to have helped make it work as it should. Also check Settings > Brightness and Wallpaper and see how it is set, reduce the brightness level it is too bright for you. -
Routing Method for Response Groups not Working as Expected
I have a situation where Response Groups are not routing calls in the order specified in the group settings. Serial is the primary setting used in this situation so the same person is always called first. However, the calls are being routed randomly.
One Response Group was deleted entirely and recreated which seemed to solve the problem temporarily but the problem returned as soon as the Response Group was modified.
CU level appears to be July 2013.
I have not had a chance to dig in and do any logging yet but will soon. However, if anyone has seen this behavior or has any suggestions any feedback is appreciated.
Thank you.I have some logs now and what I am seeing on a working call (in my lab) is what I would expect. It tries each person in order top down. If that person does not answer then a SIP 487 message is returned and it moves on to the next person and sends
another INVITE, etc. until it gets to the end and does whatever is configured.
Note: the timeout for trying each group member is 20 seconds.
What I am seeing from the logs where this issue is occurring is it is trying the first user at the bottom of the list (another in the list before them was available). It is sending multiple INVITE messages to that person (who I instructed to not answer)
taking up the whole queue timeout (60 seconds) before trying the next person. It tries that person for another 20 seconds (which is beyond the queue timeout at this point). When that group member does not answer and it goes to voicemail
as configured.
Even more strangely in a second test it tried that same person at the bottom of the list, tried them twice, moved on to another available user, then back to the first user it tried (the queue timeout should have kicked in by now), then finally went to voicemail.
Thanks. -
Why is the Pages app for iPad Mini not working?
For the last few days I have been having major issues with the word processing application Pages for the iPad. It is taking a very long time to show me my documents, then it takes just as long to open up documents. Then when it finally opens up the document I have selected; the entire functionality is extremely slow and sluggish.
I turned the iPad on and off several times to see if that would help. I deleted the pages app. I even freed up some extra space on the iPad. None of these things have resolved anything.
If it is at all relevant I am using the most recent version of Pages (especially since I re-downloaded it). I am also using the latest version of iOS 8 on the iPad. My iPad is synched to iCloud. I have a maximum storage capacity of 20 gb (to which I have only used 675 kb). I am using the first generation iPad Mini (which is the very first iPad mini)
What could be the problem?
Should I reset the factory settings of the entire iPad? I'm at a loss of how to resolve this.The problem may be due to slow internet access to icloud where the document is being stored and saved.
Try creating a new document which is not on iCloud to see how the performance is.
Maybe you are looking for
-
When I launch Photoshop CC 2014 and then open a .nef raw file it launches Adobe Camera Raw and I click Open Image, then I "Convert to Smart Object" then launch Filter > Camera Raw Filter. Is there a preference somewhere for raw files that just bring
-
How can i get windows media player
I need to get windows media player? Any apps or sites I can use.
-
Change BgColors, FgColors for all Components in a Container?
Is there a possibility to change the Background Color, the Foreground Color and the Fontsettings for all Components in a Container? Each Component in the Container should get the Colorsettings of the Container...
-
I am having trouble with adding an item listener to my buttons on a GUI I have made. I have tried the code searchButton.addItemListener(this); clearFormButton.addItemListener(this); and I get the following error: jobFinderGui.java:6: jobFinderGui sho
-
Bridge Only Displays Info About Embedded Profiles from Photoshop, not from Illustrator or InDesign
I've been advised to my problem in this part of the forum. So, Adobe Bridge people, please see this thread: http://forums.adobe.com/message/3616660#3616660 Thanks!