Enabling trace in release version of FlashPlayer?

Is there a command line argument or some other way to enable trace output in a release (not debug) version of FlashPlayer?

Hi,
There is no way. You will need a version of Flash Player debugger in order to do that.
Regards,
Pablo Souza

Similar Messages

Is it Possible develop plugin only in release version?

I am new to development, I find difficult to test my code with the release version alone.
Is it necessary to obtain the debug version, so as to test my code. Or release version of Indesign is more than enough?
I came to know the any ASN membership will receive the debug version as a benefit. Is it so?

It is possible to develop a plugin without debug version.
However if you run into troubles the debug version allows you to trace the source of it.
To get indesign debug versions i had to write a mail to adobe, 4 hours later i could download the debug versions from my (free) adobe partner account. You can find mail adress with google.

Debug & release versions of flash player?

i installed flex 3.0 on my XPSP2 system, and worked through
some examples. all was well, but when i try to use internet
explorer, all sites that require flash 9 now complain it's not
installed on my system. i am assuming a query is sent from ie7
asking which version of flash is present on my system, and the
debug version of flash returns a token indicating something other
than flash 9 installed. i looked at flex and ie7 options, but
couldn't find anything that would enable me to run both debug and
release versions of the player. is there some way for the debug and
release version of flash to live on the same system, and to keep
them separate?

It is recommended to install both to ensure that Flash will work in as many browsers/third party apps as possible. Apps like skype, microsoft office, adobe reader that use Flash Player may require the active X flash player. Most browsers use the normal plugin.

Error Window in Release Version of Adobe AIR

Is there a way to turn on the error window in the release
version of Adobe AIR?
When running my AIR application from in Flex Builder I get a
window with error details when an error occures. Is there some way
to to get this window and error details when running my installed
AIR app? I have the Adobe AIR 1.1 installed. Is there another
version of Adobe AIR 1.1 which has this error window in it?

You cannot catch these errors. However, you can use the
following unsupported method with AIR 1.1 to enable debug mode for
the installed applications.
Please note that we don't promise this will work in any
future release, and it won't work if either the DRM or ELS APIs are
used by your application. Also, it has a negative impact on
performance.
To enable debug mode for installed applications: First find
the installed location of the application. Then, find the
"application.xml" file inside that directory. Create an empty file
called "debug" next to application.xml. The next time the
application is started, it will launch in debug mode, as if run
from adl.

Firefox 3.5.3 is not able to play radio built-in a website, inspite of the newest version of Flashplayer 10.2.152.32

I have installed a new computer (windows 7 64 bit). We use to listen to radio fragments and videofragments which are built in a website (www.eo.nl). But although I have installed the latest version of flashplayer, the site said: You need flash player version 9 or higher.

Going all the way back to Firefox 3.0.5 is shear foolishness, it is 14 security versions behind the last 3.0.19 release. And that version is missing at least a dozen security updates that were applied to the 3.5 and 3.6 versions after support for 3.0.x ended.
If you are not happy with Firefox 4, you should have installed Firefox 3.6.17. That is very similar to the 3.0 and has all the security fixes that have been released since support for Firefox 3.0.x ended last year.

How do I find the difference between every OCI releases version in SRM ?

Hi guys,
Ithere any document about the detailed difference between every OCI (open catalog interface) release versions in SRM ?
So far, I only found some documents about OCI release 2.0,3.0,4.0, but no detailed telling what's the difference between them.

Hi,
[SAP Supplier Relationship Management - SAP SRM Open Catalog Interface (B2B-OCI) [original link is broken]|SAP Supplier Relationship Management - SAP SRM Open Catalog Interface (B2B-OCI) [original link is broken]]
I always give the latest OCI 4.0 specification to suppliers who implements the OCI enabled catalog. If supplier implements the OCI 4.0, old version of OCI works.
Regards,
Masa

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version.

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version. I am stuck in the beta. Itunes will not let me restore my iphone or update it. PLZ HELP ME

Wondering if you have a current Backup on iTunes ...if yes you could put the iPhone in DFU Mode by holding the Home button while you plug in the lightning cable. Then you could Restore the iPhone to Factory Settings on 8.0.2 and after a full Restore go back and then Restore from your Backup. This happens every time a public release occurs. Many folks on the Golden Master or otherwise in the AppleSeed program with a Beta version for some reason don't move to the official release ...then the software time-bomb hits and they can't upgrade.

Application Insights is not recording any data from the released version of my Windows Phone app

I released my first Windows Phone app a week ago, and Application Insights worked perfectly to collect usage data whilst in a debug build. However, the released version of the app is not returning any data at all. Is this a common problem for new apps or
is there a problem that I need to address?
I configured Application Insights for my app using the information on this guide - http://msdn.microsoft.com/en-us/library/dn509554.aspx
Any ideas or help would be greatly appreciated, thanks for your help.

Hi Bernard, thanks for your reply.
I tested the data using a release package of the Windows Phone app deployed directly to my phone from Visual Studio and the data appeared after around 10 minutes. However, once I published the exact same package to the Windows Phone Store and started using
the version downloaded from the store, no usage data has been uploaded even after several days of waiting.
I am using SDK 0.7.1 and Application Insights Tools for Visual Studio v1.3.2. The app is built for WP 8.0 and running on WP 8.1.
The instrumentation key is 757eeaff-605e-44a2-8eaa-6abf498bfcf5.
Thanks for your time and help, I really appreciate it.
Dan

Why T-RFC Port canu2019t handle Partner Profile Segment Release Version.

Can TRFC Port handle the segment release of each of the segment if configured in Partner Profile.
As per sap, in Partner Profile, if we maintain the two field "Seg. Release in IDoc Type" and "Segment Application release" to a SAP Release lower than the current release version then all the segment populated by the IDoc adapter should be populated as per the lower release structure.
For test Purpose I have created two IDoc using File Port and TRFC port and for both of then I have maintained the Partner Profile Fields "Seg Release in IDoc Type" and "Segment Application Release" as 46C although the latest release is 701.
In the IDoc there is a custom segment ZE1PMX with two Version Release 46C & 701. 46C is having 7 Fields and 701 is having 9 fields.
Test using TRFC Port: Using TRFC port the IDoc that is getting generated are not having the segment structure of release 46C instead of that it is taking the segment structure of latest release 701 which is having 9 fields.
Test using File Port: Using File port the IDoc that is getting generated are having the segment structure of release 46C instead of latest release 701 which is having 7 fields which is desirable.
I have also done these testing in other SAP release like 700 and found that while saving the partner profile with a lower segment release number it throws an warning message as "Segment definitions missing for release 620/620" and IDocs are not getting generated with a error status Code 2 "Segment E1BPMEPOITEM1 is unknown in Release 620 /". But from release 701 sap allows us to save the Partner Profile without warning and also creates the IDoc without error but the segments takes the latest release structure instead of the release maintained in the Partner Profile.
If any one has already done some investigation on this issue please let me know why there is a difference in TRFC Port and File Port. Is there any other configuration that is missing for T-RFC Port.

Hi Dennis
This forum is focused on [SAP NetWeaver Gateway|http://www.sdn.sap.com/irj/sdn/gateway], i.e. the (relatively) new OData/REST-orientated mechanism to expose ERP data and functions.
You're talking about the ('classic') Gateway i.e. the service that runs on port 33<SYSNR>. As a result, you are better off posting in the forum that covers that Gateway, i.e. [Application Server Infrastructure|SAP NetWeaver Application Server;
The names do make it confusing, for sure.
Good luck!
dj

When installing the latest version of Flashplayer I am asked to close Spotify help EH. Where can I find this application to be able to close it?

When installing the latest version of Flashplayer I am asked to close Spotify help EH. Where can I find this application to be able to close it?

Use your operating system's tools to close running processes. If you don't know how, tell us your OS.

My macbook pro early 2012 won't install release version of yosemite after being in the beta test

my macbook pro early 2012 won't install release version of yosemite after being in the beta test, anyone else having any issues with this?

Received an email from apple saying thank you for being in the beta test and they tell you to download the release version from the mac app store and install it. Done this twice and it says installed successfully after rebooting twice and doing the usual install of a new OS. However when it boots up and opens your desktop it still has the Feedback assistant installed and continuity and all the new features do not work at all. Making me assume that the final release has not installed at all. Spoke to apple on the Phone and they Don't know how to solve it. Except for doing a fresh OS Install. Which i would rather not do, but might have too. currently backing up my Mac as we spec to do it

[Win/CS3] Problem with tree view nodes display In Release Version of InDesign

b [Win/CS3]
Hi All,
I am Facing a problem from last few days.I have a dialog on which i have a treeview ListBox.I am filling this listBox dynamically.On a Button click Event.
My requirement is to show Some text value on the node and Index value on the back end.So When i select String1 the index1 should be Selected.
b This Listbox is working fine ON Debug Version. But Crashing On Release Version.That seems Strange to me..........?????????
b in DialogObserver::Update on button click event
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
b and in TreeviewMgr::ApplyDataToWidget
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I am going to database and retrieving string value according to that
IndexNo.
WCHAR Buf[200];// this contains value retrieve from database
Then i am converting WCHAR[] to CHAR[] BY using
size_t origsize = wcslen(Buf) + 1 ;
const size_t newsize = 100;
size_t convertedChars = 0;
char nstring[newsize];
wcstombs_s (&convertedChars, nstring, origsize, buf, _TRUNCATE);
PMString StringToDisplay(nstring);
//Till here its working fine
But when i am setting this value as Node name
style.Translate();
setNodeName( widgetList, StringToDisplay, kIDCTVTextWidgetID );
and function return kTrue; statement executed The application is crashing.
With error showing
b INdesign Encountered a problem Needs to close.
I Am not able to find out why this is not working on Release while it is working fine on debug version..???????????????????
Is I am missing or Made some changes For release version..????
Thanks,

Hi Michael,
Thanks for your reply.
The lines
NodeID node = IDCGridNodeID::Create(IndexX);
treeMgr->NodeAdded(node);
are working fine for Both Debug N Release version.The Application Is crashing In tree view manager class as i explained.
while it works fine without having even a single warning in debug version.
I read the document and i find out if i want to add node in treeview i have to call
treeMgr->NodeAdded(node);
which will call manager
b and in TreeviewMgr::ApplyDataToWidget
i am getting my node name as
TreeNodePtr<IDCGridNodeID> nodeID(node);
PMString IndexNo= nodeID->GetName();
I don't think that something is wrong in this but i am not sure becoz i am new in indesign development.
for adding nodes i referred the SDK examples.I found the same code for adding.

Flash Builder 4.6 differences between debug version and apk release version

I've been struggling for several days now. I have a simple swf file that just says 'hello world' on a green background. It is written in Flash 8 actionscript 2. I've used the Flash Builder actionscript mobile project and flex mobile project in both cases and I can get it to download and display quite happily in the debug version on the desktop emulator and on my ASUS eee Pad Transformer Prime using a USB cable . Thinking that all is ok I then 'export the release build' and the result is a blank white screen on my tablet.
I then did a simple Flex Project as per an adobe 'my first app' tutorial (hellow world!/Success!) and exported the release build with the same certificate I used before and it worked fine.
So after all that my question is - what could be the reason that my tablet is quite able to run a debug version of my embedded swf file but not the apk release version of it?
Any ideas?
thanks
Nick

When I run the tool I dont see flash builder as an option?

Debug version works well, but release version does not work with simulator

Hi,
I use iOS 7.0.3 and Xcode 5.0.2.
I developped one application and I tested with simulator-ipad retina. The debug version works well and release version did not work at all.
The basic configuraton is like this:
cocos2d: cocos2d-iphone v2.1
cocos2d: compiled with Profiling Support: NO
cocos2d: OS version: 7.0.3 (0x07000300)
cocos2d: GL_VENDOR: Apple Computer, Inc.
cocos2d: GL_RENDERER: Apple Software Renderer
cocos2d: GL_VERSION: OpenGL ES 2.0 APPLE-9.2.1
cocos2d: GL_MAX_TEXTURE_SIZE: 4096
cocos2d: GL_MAX_TEXTURE_UNITS: 8
cocos2d: GL_MAX_SAMPLES: 4
cocos2d: GL supports PVRTC: YES
cocos2d: GL supports BGRA8888 textures: YES
cocos2d: GL supports NPOT textures: YES
cocos2d: GL supports discard_framebuffer: YES
cocos2d: GL supports shareable VAO: NO
What is the reason and how to fix it?

Well, yes...you need to upgrade to OS X Server 4.0 ($19.99)...I already did it also!

Flash Builder 4 Release version.

Hi
I want to know when the Flash builder 4 will be available as release version, as it is the beta version available right now.
And what about if someone already have the flex builder 3 licence key(what will be the upgrade coast? if possible).
thanks
rlongia.

@rlongia,
http://opensource.adobe.com/wiki/display/flexsdk/Gumbo
Flex 4 should be available in "early 2010". I don't know anything about update pricing, but if you do have a Flex Builder 3 serial number, you can request an Adobe Flash Builder 4 Beta Extension Request at https://freeriatools.adobe.com/flashbuilder4beta/.
Peter

Enabling trace in release version of FlashPlayer?

Similar Messages

Maybe you are looking for