Enabling Wi-Fi sync without  USB cable

Hi there,
is there a way to enable Wi-Fi sync without cable? I need this because my main work machine is actually VM and I can't find a way to connect my phone via USB to a VM. Can someone help me? I already lost a lot of hours trying everything to make it work but I'm lost without hope.

I don't quite understand your issue...in your initial post you state there is no way to connect your phone, by USB cable, to your work computer...now you're asking how to do so...
Sorry, but you've lost me here...

Similar Messages

  • Any way to update to Lollipop without USB Cable? | Xperia Z Ultra

    Hi!
    Please help me find a way to update without USB cable (my usb is not working, I charge the device with the magnetic port).
    Solved!
    Go to Solution.

    There's no answer to that question, Sorry. but check 
    settings > about phone > software update 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

    my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

    Hi,
    No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Envy 4500 wireless will not print without USB cable

    My HP Envy 4500 wireless printer/scan/copier does not seem to be able to work without the USB cable.  I followed the instructions provided to change for USB to wireless but it will not work without.  I have uninstalled and reinstalled the software.  I have windows 7 on my laptop and an IPod both of which show that the printer is showing.  I made it the default printer.   The first time I tried to do it (without the USB cord) I was unable to get passed putting in my wireless password which starts with a capital K and wasn't certain how to make a capital so reread instructions and used the USB but really want to use it wireless.  Any suggestions.  I turned the firewall off this morning to try but to no avail.  If I do need to turn the firewall off would I then put it back on if it gets working?  I would so appreciate any suggestions!

    @Chaitaishanwelcome to the community,
    I understand you're having some difficulties when trying to set your Envy 4500 up on your wireless network. I have looked around and found this guide for you to try out. If you run into any error messages, codes, issues, etc, please let me know the specific details and I will continue to research if need be.
    An 'Unable to find printer' Error Displays for the HP ENVY 4500 e-All-in-One and HP Deskjet Ink Adva...
    I hope this helps you
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Since downloading IOS 7.0.4 my iPhone will no longer sync using USB cable because of "Error -50"?????

    Why, after installing IOS 7.0.4 will my iPhone only sync with my MacBook Pro using wi-fi and NOT when using the USB cable? An error message appears citing "Error -50" for which I can find no recent fix online as all the problems are related to some years ago?

    Thanks, Lawrence. I figured that was what I was going to have to do in the end. I have a few games with quite a few hours invested, and I worry that I'll lose the progress I have as they do not save to the cloud. I may have to bite the bullet, and just take the plunge to resolve this. I just want a way to easily transfer my "Home Computer" for my iPhone. My laptop is years old and in need of being replaced, and it's about time to upgrade my phone. These life events piling up are making me consider switching to a friendlier OS. I'm not using this as a threat. I just hope some apple high up will read this, and realize that we need alternatives. Life happens.
    Thank you both Paul and Lawrence. I clicked "This helped me" not knowing it would remove the option to choose "This fixed my problem" too. For anyone else reading this thread. Using the guide provided has done both. It has helped me and given me a fix to my current problem. Lawrence has also provided me with the last bit of information I feel is missing from wjosten's guide. That syncing will completely erase all of your data and reinstall it in one fell swoop. It's a great fix. Even if it isn't the exact one I wanted. Thank you again!

  • Apple TV 2 updating without USB cable?

    Hi, after failing to update to iOS 5 s/w on my ATV it tells me to connect to itunes from recovery mode.
    I have no micro usb cable to do this with.
       - Can i update without connecting a USB cable?
       - Where can i get one online (UK)?
    Because of where i work i am unable to get to a Genius Bar, and having searched the Apple website it appears they have taken off email support, daft idea, living in Germany i have to phone the UK support number at a ridiculous price, to be told im getting charged for telephone support. Is this another way of Apple taking our hard earned cash by monopolising the market or is there a better way? (Like going over to Android?)
    If Apple products that can only be recovered via USB then why arent those products shipped with the cables?
            ( ...oh wait yeah its so they can charge us for thier failed s/w...)
    Thanks.

    http://store.apple.com/us/product/H3046VC/A?mco=MTY3ODQ5OTY
    $19.95 from apple store.

  • Updating without USB cable?

    I have Nokia 2700 Classic with outdated firmware pre-installed... Maybe it's possible somehow update firmware, using Bluetooth (or memory card), because I do not have USB cable for this phone model...

    No it isn't possible to update without a cable, only option now for you is to take it a Nokia care center and let them update it.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Palm V connecting with sync/charge usb cable to OS X Tiger 10.4.4

    I recently bought a very nifty cable that lets my palm v charge and sync with my mac through USB. Sweet, no more bulky charging base, outlet use, or need for a serial anything. =)
    But I cant get it to work.
    On the package I was supposed to go to
    http://shop.brando.com.hk/p5usbsynccharger.php and download the driver.
    I am used to windows machines so this seemed normal.
    I downloaded this
    http://shop.brando.com.hk/files/p5usb_mac_osx10.1.x.zip
    Even though I have 10.4.4
    So a couple of questions,
    First: from examing the package contents can anyone tell me what files I would need to delete if I wanted to revert to pre installation?
    Second: I guess I expected my Palm to show up as a disk on my desktop. I have iSync and Palms software for Mac tiger and Palm V (same program) but I am not able to sync (maybe I just dont know what I am doing in the program and this is where I am spending most of my efforts)
    My fears are: that palms program would have worked fine with this cable and I didnt need to download this package and by loading it have screwed up palms communication skills. And that I will never get to use this thing.
    Sadly I am realizing it will never mesh with iCal no matter what I do.
    Boo Hoo
    Help appreciated =)

    According to your post you downloaded 10.1.x.zip. Linked a little further down the page is another driver labeled 'Newest Mac driver'. It's not the same file you have listed. It's a .sit file which means you'll need Stuffit (if you don't already have it) to expand the file. So, for starters it would probably help to get the current most driver. Additionally there was another link on that page which has help notes. If you haven't already done so then check here to see if there's anything that may assist you. I have a Palm and have no trouble using the Palm Desktop software, even after upgrading to 10.4.4. I too use a USB cable to sync and charge the unit.
    Regarding iSync, your model Palm is not on the supported list. You'll most likely need to download Missing Sync to try getting it working with iSync. Also, the Palm never shows up on the desktop as a drive, at least not for me. Please post back with your progress.

  • Is there any way to install OS without USB Cable?

    Is there any way to install coroupted OS of z10 with USB cable? Actually my phones USB point is not working and OS is coroupted. IS THERE ANY WAY TO REINSTALL IT?

    At
    Navigate to Start -> Control Panel -> Device Manager -> Network Adapters.
    What do you see?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to recharge my Z22 without USB-cable?

    Hi from Fuerteventura
    my XP-windows Laptop crashed after 5 years of duty. Now with a Windows7 Computer I can sync by Infrared, OK, but how can I recharge the battery of my Zire Z22? Has anyone an idea? Thanks.
    Post relates to: Zire
    This question was solved.
    View Solution.

    waimanalo wrote:
    Hi from Fuerteventura
    my XP-windows Laptop crashed after 5 years of duty. Now with a Windows7 Computer I can sync by Infrared, OK, but how can I recharge the battery of my Zire Z22? Has anyone an idea? Thanks.
    Post relates to: Zire
    I was under the impression that the USB port still provides power to the cable even though the software is not compatible.
    Have you actually tried charging the device with the cable?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • [E51] Microsoft exchange sync with usb cable

    Hi,
    Is it possible to sync my PC exchange outlook account with my E51 phone when it plugged with the usb data cable ?
    If yes, is it possible to sync the LDAP enterprise contact book ?
    I have installed Exchange on the phone, set the configuration, but the phone request an internet connexion (GPRS or wifi only )
    Regards,

    Nokia PC Suite will only work with Nokia cables. The correct cable for the 6210 was the Nokia DLR-3P listed at the bottom of this page: http://europe.nokia.com/A4160286

  • IPhone iTunes Sync without USB to Mac Sync

    Hey guys,
    Is there any way to get the music on my Mac that I've recently bought on iTunes to my iPhone without syncing my iPhone via USB to my Mac?
    Also, when are we gonna see bluetooth syncing? Walk in the room, your mac detects your iPhone via bluetooth and automatically syncs it without you knowing so when you get to work your music is already on there, ready to go, without you doing anything. Ahhh...that would be nice.

    "Is there any way to get the music on my Mac that I've recently bought on iTunes to my iPhone without syncing my iPhone via USB to my Mac? "
    No.
    "when are we gonna see bluetooth syncing?"
    Unless Apple announces, there is now ay to know when or if they will do anything.

  • Why cant i sync without a cable

    I have heard about i sync but it is through the bluetooth which for me wont work hardly at all so i got an ipad hoping it might work however does not so im wondering why it wont work. Im also questioning if this isync is just a lost cause and was not meant to work at all. I wonder if this is not a lost cause why hasn't iTunes used that a to make a quicker syncing process.
    Also why is it through bluetooth and not through WiFI so that you wouldn't be sitting for 3 hours for iTunes to fill you iphone with songs.

    iSync is for non-Apple devices only and only for contacts and calendars. You use iTunes to sync music, movies, contacts etc with Apple devices via USB.
    WiFi sync is not a feature of iOS devices for media.
    You can sync Contacts, Calendars, Bookmarks etc. "over the air" using MobileMe on iOS devices.

  • My iMac no longer will recognize devices thru itunes on either wifi sync or usb cable

    My imac no longer will recognize devices when I open itunes. I have tried every version of restarting computer, ipad etc. all versions are up to date. I cannot transfer events from iphoto to my ipad. drives me nuts. I used to do this just time. I have had macs for years and am not a dummie? 

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • Photosmart 4780 Wireless connection without USB cable on mac!!!

    Dear all,
    My mac pro does recognize the printer via USB connection anymore. I tried to turn on the wireless connection on the 4780 but could not find 'hpsetup' in wireless networks.....
    Is there any other way to connect this thing wirelessly or do i need to buy a new printer ??
    regard
    Ruben  

    Hey everyone.. I have the ultimate solution for this:
    1- On your small printer screen, go to wireless settings, press on WSP - press "push button" 
    2- Go to your wireless router panel - by using the IP address of the router (mine is 198.122.3.3), go to "Wireless" and press the WSP Button (two rounded arrows) 
    another option:
    1- On your small printer screen, go to wireless settings, press on WSP - press "Pin" 
    2- Go to your wireless router panel, go to "Wireless" and pput the PIN number that you see on the small screen.
    For further readings, please go to this link: http://www.hp.com/global/us/en/wireless/printer-setup-help.html

Maybe you are looking for

  • [bug] workqueue leaked lock or atomic when connecting Apple Trackpad

    Hi. Recently I reported pretty useless bug into archlinux bugtracker about system freezes caused by Apple Magic Trackpad. https://bugs.archlinux.org/task/37587 I've been able to reproduce it and dump dmesg output to file. Now I need some help in «dec

  • Too Many Color Correctors

    I added the color corrector effect to a piece of video on my timeline. I wanted to compare that to another color idea I had, so I added another color corrector effect on the same piece of video. Now, when I click on the video clip, color corrector an

  • WebLogic 10.0 supports Java 6?

    Does anyone know if WebLogic server 10.0 supports Java 6? I am currently running Java 1.5 and I would like to run my application with Java 1.6. If not, what version of WebLogic I should upgrade so that I can run with Java 6? Thanks.

  • Batch process background color either side of artwork image

    I need to batch process the background color from several galleries from white to gray. On this page - Simon Toparovsky - A Letter from The Renaissance - some of the images in the gallery have a white background on the left and right side of the artw

  • Connection Error -8003 in 2004

    Hi, I have just installed 2004 on my dev pc, but am unable to connect to the company with a -8003 error.  I can connect to our live server however with the exact same code (with the correct server credentials). The install is currently 2004 with sp1,