Enahncement - lenth of object cause deletion of data
hello friends ,
need some info .
I am working one one enhance ment , where 2 feilds have been added to the data source and counter infoobject also been created in BW.
Now the problem , one another fields lenth has been changes in R/3 from 14 to 15 . and so i have to also change the lenth of counter info-object from 14 to 15 .
When i do so , it's been asking me to delete the data from ODS , as this infoobject has been used there .
could you please let me know , how can i do it with out deleting data , because when i transport thie things in productioj , it will also ask me to delte the data in prdouction ,.
I do not want to delete huge data in prod , but also want to change the lenth of object frm 14- to 15 .
Is it possible ?
regards
>
> I am working one one enhance ment , where 2 feilds have been added to the data source and counter infoobject also been created in BW.
>
> Now the problem , one another fields lenth has been changes in R/3 from 14 to 15 . and so i have to also change the lenth of counter info-object from 14 to 15 .
>
> When i do so , it's been asking me to delete the data from ODS , as this infoobject has been used there .
>
> could you please let me know , how can i do it with out deleting data , because when i transport thie things in productioj , it will also ask me to delte the data in prdouction ,.
>
> I do not want to delete huge data in prod , but also want to change the lenth of object frm 14- to 15 .
>
> Is it possible ?
>
> regards
hi,
in a simple way, create new infoobject(15) for the cube and make the previous infobject as noupdate.
Similar Messages
-
Deletion of data objects from already not existed source system
Hello, Everybody,
In BI 7 i had QASCLNT<b>500</b> source system and have been created datasource with transformation. Later QASCLNT<b>500</b> was deleted or changed (i don't know very well) to QASCLNT<b><i>300</i></b>, but old datasource with transformation is still in new system. When i try to delete these objects i get a message - "Source system QASCLNT<b>500</b> does not exist".
Could you give me a suggestion how can i delete that datasourse and transformation?
Thanks in advance.
Best Regards,
Arunas StonysHi,
It depends on your requirements whether you have to keep the history or not.
If you delete the data from your info providers, you have to reload everything from scratch.
If you want to delete the data from all
1. first delete the data in data targets such as cubes, DSO's or ODS then
2. master data
use these programs to delete from se38
-> rsdrd_delete_facts - for Cubes and DSO or ODS
-> rsdmd_del_background - for master data in background
-> rsdmd_del_master_data_texts - for master data right away
manage your master data info objetcs after the deletion, if you still find them....
go to se14 and delete individually each and every table such as attributes, texts, sids, hierarchy.
hope it helps you better.
But I dont recommend you to delete try to load full repair options for all yur loads -
Delete Certain Data in PSA or DSO Objects
Currently we loaded the data into the DSO Objects, and we wanted to delete certain data in the PSA, when I click that particular records, i can only change it but cannot delete it. So is there anyway that i can delete certain data in the psa? Or in DSO Objects?
Hi........
You cannot delete certain data from PSA............If you want to any erroneous request...........you copy the datasource.......go to RSA1 >> Find the datasource >> double click on it >>click on the PSA button on the top >> there in the button you will get one icon which is similar to the icon of the infopackage group in 3.5...........click on it..............there you will get the request...........make the QM status red and delete it....................
For DSO you can do selective deletion :
Goto manage on the ODS/Cube and in there goto the Contents tab. Hit the trash can button that says selective deletion. In there you'll get a selection screen based on which you can delete the data. But be cautious when using this option in case you need to reload the data as you'll have to load exactly the same selection criteria while loading that you used for deletion.
Go through this
http://help.sap.com/saphelp_nw04/helpdata/en/ca/5c7b3cbd556915e10000000a114084/content.htm
Regards,
Debjani............ -
SharePoint 2013 code for the SharePoint Config database stored procedure dbo.proc_getObject has been changed from SharePoint 2010 with the difference of select with nolock.
I am seeing numerous Error 7886, Severity-20 errors nightly:
"A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated."
Here I have commented out "with (nolock)" to 'fix' the error and to align the store proc with SharePoint 2010 code :
ALTER PROCEDURE [dbo].[proc_getObject]
@Id uniqueidentifier,
@RequestGuid uniqueidentifier = NULL OUTPUT
AS
SET NOCOUNT ON
SELECT
Id,
ParentId,
ClassId,
Name,
Status,
Version,
Properties
FROM
Objects --with (nolock)
WHERE
Id = @Id
RETURN 0
How is this stored procedure called and for what use?
Why did Microsoft make this change to SharePoint 2013 - some performance gain through dirty reads at the cost of stability? Or what could be a reason for this to happen that can be fixed?GetObject retrieves any farm object that is selected (by ID). Changing this is obviously not supported, and NoLock was used to (help) prevent locks when performing a select query.
I've never seen this issue, and would guess it is unique to your environment given this is such a core piece of the SharePoint infrastructure.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to delete timesheet data in MAM 2.5?
Hello experts,
I need to find a way how to delete timesheet data (Mam010Item090) from the MI Client (SP18) running MAM 2.5. The task seemed to be quite straightforward however for some reason all the notifications are staying in IN_SYNC state which prevents me from deleting them.
Anyone knows why they stay in this state, possibly what to do to change their state?
Any help would be greatly appreciated.
Regards,
FrankHi,
1. MAM010Item090 is notification long text, not timesheet. So there is some confusion on what exactly you want to delete.
2. Records in DB have three statuses: G - global, which means data was synhronised with the backend, L - local, data was created on the device but not synchronised to the backend yet, S- In-sync, synchronisation process in Mobile Infrastructure is always asynchronous which means that there are always 2 requests for data exchange to process one data update transaction. When first request was sent from the device to the middleware but no response received yet - data record will be in status in-Sync.
Data can stay in status "S" for multiple reasons. Some examples: when data change request (BAPI) was executed it ended with ABEND or didn't provide a proper response, device DB got corrupted (exception thrown while synchronising), mobileID has some qeues in status "I-Waiting", etc.
There is no universal solution on how to fix the situation: it might be a client reset, or SyncBo got deactivated (and that caused I-Waiting situation), etc.
And standard MAM has no such object as timesheet. Did you mean time confirmation?
Regards,
Larissa Limarova -
Deletion of data within the database tables
The user is trying to clean up the 2014 data within the database tables. He is running a delete function which keeps causing the log files
to exceed their limit. The tables are large and he is unable to delete the data in one command due to available size and logging. What is the best way to approach this?
Thanks,Hi venkatesh1985,
According to your description, the user fails to delete data in tables due to the limited space of log file. Based on my research, this issue could occur when you use the delete statement(DELETE FROM ExampleTable) in a single transaction and consume all
available space on your transaction log disk.
To avoid this issue, you could use the two methods below to delete the data.
1. Use a loop combined with TOP and delete rows in smaller transactions as the following example. This method requires you to delete all the tables one by one.
SELECT 1
WHILE @@ROWCOUNT > 0
BEGIN
DELETE TOP (1000)
FROM LargeTable
END
For more information about the process, please refer to the article:
http://dbadiaries.com/how-to-delete-millions-of-rows-using-t-sql-with-reduced-impact
2. If you want to delete all the data from all tables in the specific database, you could script the entire database and all database objects. Then drop the database and recreate it using the script as the steps below.
a. In Object Explorer, expand the node for the instance containing the database to be scripted.
b. Point to Tasks, and then click Generate Scripts and click Next.
c. Select the option of 'Script the entire database and all database objects'.
d. Specify how scripts should be saved. You could save the script to a file or new query window. Click Next, then click ok.
e. Drop the database, and run the script in the query window to recreate it. For more information, please refer to the article:
http://msdn.microsoft.com/en-us/library/bb895179.aspx#Introduction
In addition, if possible, please increase the size of the log file or move the log file to a different disk with more disk space.
Regards,
Michelle Li -
By any chance long living filestream object cause unmanaged memory leak?
Hi,
I am running my application where in I have one file stream object which live for long duration, say its life time is equivalent to life time of application. So by any chance this kind of object causes unmanaged memory leak in the application. Because when
I see private bytes for my application, it is higher than the all bytes in heap counter. That mean there is a unmanaged memory leak. So does such filestream object cause such behaviour?
Thanks and Regards,
LucasWhat makes you think it's the file stream that leaks unmanaged memory? There could be other parts of your applications that do that.
FileStream doesn't usually allocate unmanaged memory. Its internal buffer is a GC heap allocated byte[] array. The only unmanaged memory allocation that I know of in FileStream is a OVERLAPPED structure used for async I/O. If you use BeginRead/Write make
sure you call EndRead/Write correctly, otherwise that structure may be leaked.
@Joel Engineer: "When a stream uses ASCII encoding under certain cases nulls are added to the data for block alignment."
FileStream doesn't have anything to do with text encoding and I've told you that before. Next time when I run into a post that makes such a claim I'll simply delete it. This display of ignorance has lasted more than enough. -
Business partner deletion - master data
In SAP Note 1111635 -Business partner cannot be deleted
try to delete a business partner or a contact person. This is not
possible bcoz address cannot be deleted because there are other references .
1) deletion of the address, because it used to be used as a sender or recipient for
e-mails, faxes and so on .
If we use address within BUSINESS COMMUNICTION SERVICES (BCS )
the system writes a where-used list for this address.This reference is a link between the address and the sent document. We can only delete the address when this link no longer exists.
HOW DO WE DELETE THE LINK BETWEEN ADRESS AND THE SENT DOCUMENT ?
In SAP Note 556538 - Archiving business partner for the employee role
Business partners in the employee role are linked to an object called the
central person. This object originates from the HR-PD framework and is used
to integrate the business partner with the HR-PD framework. The central
person does not have an archiving function. Only the business partner can
be archived. However, the business partner has the employee role and is
thus linked with a central person (and therefore cannot be archived).
HOW DO WE REMOVE THE LINK BETWEEN BUSINESS PARTNER u2013ROLE , EMPLOYEE AND CENTRAL PERSON ??Hello Jorgito,
Without deleting transactional data. I guess you mean without deleting all the data from de cubes. But you want to get rid of the transactional data of BP type "C".
Go to the manage screen of the cube involved.
Go to the tab 'Contents'
click on the button 'Selective Deletion' (right-side at the bottom)
On the pop-up click on the button 'Delete selections'
Fill in type 'C'
Start the job.
I hope this will help you.
Udo -
Delete Master Data - with or without sids
Hi
i am working on 0customer_attr
now when i right click and see master data it has 100 records
the same in r3 has 85 records.
so i thought i will try to delete master data and then load again.
so i right cick on 0customer and choose Delete master data.
now if i go back and see data for 0customer it still exists.
q1. what is the approach to delete and reload master data so between r3 and bw synchronization exists ???
q2. should i select with SIDS or without SIDS ???
how to rectify this error.
thankHi,
Q1..how can i find which transaction data is using those records ?
Doubleclick on the Master data IO. In the right pane you will find "Where-Used List" option. Click on that. It will give you the entire list of BW objects(DSO, Cube etc) in which your Master data IO is used.
q2. How can i delete transaction data
Right click on the Data targets(DSO, Cube etc) in which your master data IO is used, select the option Delete Data.
(or) Right click on the Data targets(DSO, Cube)>Manage>Select the Request-->Delete
q3. i dont see anything in psa,, it is master data so is that why there is no psa ??
Though it is a Master data, you should have loaded the data via DS so PSA will be there. It is possible that you might have deleted the PSA data.
Do one thing, delete all the Transactional Data(follow Q2 ans), then delete Master Data contents. Then do the loading again.
Hope it helps!
Regards,
Pavan -
I was told to post this over in this Palm forum also so hopefully SOMEONE from Palm/HP will address this... I could not find a bug report area but perhaps someone can log this.
So after months of (mostly) happily using a Pre Plus, Wednesday I get the message that I am no longer logged into my profile, and do I want to reboot or erase my data??!! I googled, and yup, it's an issue....So I reboot...same options, this reboot, it starts and asks me if I want English as my language. Woops!!! No data!
Now of course palm profile does not backup anything on my phone really....I sync direct to Exhange and use Chapura sync to a desktop Outlook PST file. So I spend the next 5 hours restoring and syncing. Just crazy. Why can't it just say that you are not currently logged in, we will try again in an hour?? And what right does palm have to delete MY data that the profile does not even backup??? My exchange and chapura sync'ed data? Sure, I can re-sync with both of those. But my Chapura only if I am on the same wi-fi network as the local PC. So what does that mean if I am traveling? And re-syncing a huge volume of contacts takes forever. And you lose all the linked contacts also!
So I call the carrier and Palm. The carrier says...."well if your phone originally was under another phone number and you changed it as part of an upgrade, that can cause it." Huh? This can affect me months later I say??? My phone number upgrade change was done BEFORE I even turned on the phone. Palm does not even know about that first number!
So I called Palm. The guy says it can happen if 2 people use the same e-mail or credit card in their palm profile. Now since it won't even allow you to setup the same e-mail twice, I'd like to know how THAT would happen. No one on my plan uses the same card.
So the question is. We know this happens sometimes. Is there any source with credibility that really knows WHY this happens??? And does any setting reduce the likelihood of it happening again? And why can't Palm make the results less debilating? There is NO REASON that it needs to delete your data. This is crazy.
Also, other than my few purchased apps, none of my critical data is even backed up by the Palm Profile!!! I still had to re-create all my POP3 accounts, change all my preferences back, re-sync with Exchange, re-sync with Chapura, and then re-marry all the contact duplicates that Synergy did not handle right. So what's the worth?
Can the Palm Profile/backup be turned off? Does changing the palm profile in the apps perferences setting from "submit password every 4 hours" (whatever that means) to only at purchase help??
Do you have any other options when you get that reboot r erase prompt? Pull the battery without answering the prompt perhaps???????
If I am on the road and this happened, I would be without half my contacts until I returned which is unacceptable. This is very disappointing. I cannot believe the default action is not "let's TRY AGAIN", and not, "hey, let's erase all of this user's data on him"!!!
If this happens one or two more times, I have had it. I will be looking at another OS and phone after having Palm phones and organizers for the last 10 years or so. This is unacceptable.
BJBThanks for the reply. Nowhere in here do I get the sense that Palm even thinks this is a problem or are going to work on fixing it. It implies Palm thinks it is okay and the problem is me, the user, the customer, because I do not want my data resided on Palm's servers or Google's servers. Does Palm understand this is an issue whether my data is on my home PC or in the cloud and in Palm Profile??? The issue is not how I choose to store just one of my calendars and contact lists (out of 3). The issue is a bug in the Palm profile system.
The first point is this.... Regardless of HOW this happens, Palm should not immediately erase all of my data!!!! Let's say I DID sync all my data to Palm Profile. I STILL would not want to have to re-download everything just because of some glitch with your backup servers, the carrier's network, or my phone!!! Go look at some pre forums. You will see many people that DO sync all of their data to their profile, and they are STILL upset with this Palm BUG. If security is the concern, how about asking for a password first vs. just asking whether I want to reboot or erase all data? If it is really me, I would know the password! Your answer seems to imply that what is happening is OKAY. It is NOT okay whether I sync everything to Palm profile or not!
Further, even if all my data WAS backed up to Palm Profile, you still lose all preferences, all manually matched synergy contacts, etc.... etc... Again, I would still be very upset if all my data was erased even if EVERYTHING was backed up to Palm profile. DON'T ERASE MY DATA!!!
I have no problem re-synching my exchange e-mail after a problem. It works from the road, etc. However after 10 years, Palm decided to not suport the syncing of home PC's with the Pre. An unfortunate decision as Palm was a pioneer in this. You talk about security....Perhaps some of us do not want our data stored on Palm servers or google servers!!! Yes, indeed, in the event of a crash I cannot restore from the road. I can live with this if the crash was from a hardware or software issue. But it is NOT OKAY if it is caused by Palm just because of some system glitch. Since you are not restoring my home PC data anyway, why erase it?
You talk about being logged out of your profile. My phone was just used, and it was sitting on my desk. Just sitting there. And then it popped up that "I was no longer logged into my profile". What causes this? Why does it not give me a chance to re-login? How come after the erase of data and reboot I was then magically "logged in" and it was working? Did the person that was trying to steal my non-existent data in my palm profile stop trying?
So are you telling me that someone was trying to use my phone SIM, on a pre plus, with my e-mail, and had my password....and trying to login, and that is why I got the message? And then magically right after I rebooted, they stopped trying and all was okay???
I do not believe that is the case. And again, if it is, ask for my password, or a security question, or SOMETHING to confirm that it is me. And a simple google search will tell Palm/HP that this is a problem many of us have had. If I have it consistently, as I said, a 10 year customer is gone.
BJB
PS. A reply that said: "Palm is aware of this problem and will correct it with the next software update" would be a lot more comforting. -
How to delete the data in P,Q and S table
Hi All,
I want to delete the data in /BIO/PCOSTCENTER, /BIO/QCOSTCENTER AND /BIO/SCOSTCENTER. Since we have transported the costcenter infoobject from 3.0B to BI 7. But the 3.0B doesnot contain the ALPHA conversion. So we need to delete the infoobject and install from BI content.
When I am trying to activate the BI 7 obj, It is giving the error message the above tables are containing the data.
Pls suggest how to delete them and activate the 0COSTCENTER with BI 7 version.
Points will be awarded.
Thanks
SathiyaProgram RSDMD_DEL_BACKGROUND is the appropriate choice to delete master data. You should be able to search OSS notes on te pgm to get a little more info on it.
It insures referential integrity by checking all InfoProviders to make sure a master data value for that InfoObject does not exist in any InfoProviders. This might not be an issue in your case if you are dealing with a newly activated object that you have don't have in any Infoproviders, but is the only the best way to delete master data. -
Error while deleting the data from DSO
Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
" An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key. "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
MaheshHi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani..... -
Deleting master data after loading transactional data using flat file
Dear All,
I have loaded transaction data into an infocube using a flat file . While loading DTP i have checked the option "load transactional data with out master data exists" . So transactional data is loaded even if no master data is there in BW.
While loading the flat file, I made a mistake for DIVISION Characteristic where original master data value is '04000' , but i loaded the transactional data with value '4000' .Then i later realized after seeing the data from the infocube and deleted the request. then i reloaded data with value '04000'. Till now every thing is fine.
But when I see the master data for DIVISION , i can see a new entry with value '4000'.
My question is how to delete the entry value '4000' from DIVISION. I tried deleting manually this entry from 'maintaining masterdata' , but it is not allowing me to do so .
I have also checked if any transactional data exists for that value '4000' , as i said earlier I have deleted the transactional data with that values. even tried to delete the entries from the master data table, but i donot see a option to delete entries there.
Please suggest me on this.
Regards,
VeeraHi,
Goto RSA1 right click on the Info object and select Delete Master data. This will delete the master data unused existing in the table.
If this master data is not used any where else just delete the master data completely with SID option.
If even this doesnt work you can delete the complete table entire in SE14. But this will wipe out the entire table. Be sure if you wanna do this.
Hope this helps
Akhan. -
'Error occurred when deleting master data (RSDMD118)'
Helo Gurus,
When I tried to delete master data prior to the reload, its giving an error message 'Error occurred when deleting master data'. RSDMD 118.
We are currently working in BW 3.1. We checked for SAP notes for the same. But not Able to find any. So please help me to sort it out the problem as early as possible.Hi Mathew,
Are you sure that those master data are not used in any infoproviders? As far as I know you cannot delete master data if that is used in infocubes or DSOs.
You can also try transaction SLG1 with:
Object = RSDMD
Subobject = MD_DEL
and click on "Execute", this might give you the reason why data cannot be deleted.
Regards,
Csaba -
Problem in deletion of data from DSO
Hi All,
We are facing a problem in deleting data from Data Store Object.I am trying to delete data by using right click option on DSO -->Delete Data.It is saying "The system has not finished loading request no : XYZ".
I have tried to trace that request and found that request is running in background and the related process chain was deleted.Also no jobs of that request are available.
Now i want to delete one field from that particular DSO and it is not allowing because we are unable to delete data.Actually no data is present in Active table but we have data in Change Log table which we are unable to delete.
Thanks in Advance.
Regards,
Jaya.Hi,
Any way u r deleted that processchain if it is there u can kill that job through process chain by killing that job,if it is not possible
u should ask ur BASIS people in SM50 or SMICM tcode we can kill our job but ask the basis people.
once u deleted that then delete the data in hange log then (other once the data is there through that DTP it will not allow u to delete so u delete the data) then go for deleting that DTP also.
Thanks & regards
sathsih
Maybe you are looking for
-
My iPod Touch 2nd Generation won't turn on anymore
I have had this iPod for about a year now, just enough for the warranty to expire, just as I was surfing the internet the spinning dial came up and it shut off. At first I thought it just died. I plugged it in and let it charge overnight, when I woke
-
Acrobat 9.5.4 - garbled printout
Although it used to work fine, now parts of certain Metastock files printed as PDF files, mostly numbers in columns, are garbled as though they are encoded. I have removed Adobe Lean Print and reinstalled Acrobat 9.5.4 Pro but still have the same pro
-
How to send the jsp page with the data as attachment
hi my application is to display all the datas from the database.In the same page. i'm having a option to select mail address from the combo box and to send the page with the same format thru mail as an attachment . <% String from="192.168.10.1";
-
Finding then combining content from several indesign documents in one document
Hi everyone, I wonder if someone can help... I'm trying to write scripts for indesign server which I want to: a) search for, b) pick out, then c) put together content from one or many indesign documents into a template on the server starting at a pre
-
Wrong status in protocoll of SLFN and SDCR
Hello developers, when i change the status by executiong an action in SLFN or SDCR the protocol is filled with a wrong status text. For example: status "in process" --> status "approved" In the protocol you can find the technical key for the new stat