Enchancing the field in But000 and in BAPIBUS1006_CENTRAL_PERSON Structure

Hi All,
Please help me to resolve the issue. I have a requiremtent in E-rec, during external candidate creation, I have to include 3 fields along with personal data (Nationality, marital status and Total years of experience). In BUT000, there is placeholder for Marital Status and Nationality fields, so i had enchanced the view V_APPL_DATA in web dynpro component: ERC_C_APPL_MGMT_UI and mapped the field to corresponding fields in BUT000. But for total years of experience there is no placeholder in BUT000, so i have to enchance the BP. I am facing problem in this, when I enchanced the field in CI_EEW_BUT000 manually and checked it but after that I found that in BAPIBUS1006_CENTRAL_PERSON the field should be available to upload the value into BUT000. When i tried to enchance the field it is not allowing to activate and when i tried to append the structure it is appending the same structure. When I surfed I came to know that using EEWB T-code it is achiveable but it is not creating any field in that BAPI structure it is only creating the ZZ field in BUT000.
And also I came to know about BUPT T-code, whether it satisfies my requirement. Please Advice.

Dear Ramesh,
if you use a replication of HR employee (multiple work assignments (P) of a person, e.g. concurrent employment, global employee) to SRM via ALE (idocs) the business partner integration in SRM will create a single central person and related single business partner covering all position assignments within organizational management.
In this scenario it is recommended to have a single user assignment for the person in HR, means if more than one active work assignment (P) exist in HR only one user should exist at one of the employees (infotype 0105, subtype 0001).
Regards,
Michael

Similar Messages

Exact purpose of the field MTCOR-RMCHA and MTCOR-RMCH1

Hi All,
I need to know more about MATERIAL_READ function module.
I have a trouble with the MTCOR table which has fields related with the above mentioned FM. I need to know how is the field MTCOR-RMCHA and MTCOR-RMCH1related to the the Function Module MATERIAL_READ.
Thanks in advance.
Bye.

Hi All,
I need to know more about MATERIAL_READ function module.
I have a trouble with the MTCOR table which has fields related with the above mentioned FM. I need to know how is the field MTCOR-RMCHA and MTCOR-RMCH1related to the the Function Module MATERIAL_READ.
Thanks in advance.
Bye.

See the fields of RT and CRT

How to see the fields of RT and CRT Tables?
Eg: if i wanna see fields of PANNNN or any Z tables simply i can go SE11 there in Tables i will provide the table name.
if i need to see the fileds of RT and CRT show me the procedure...

Hi Vamsi,
Go to the Abap editor and execute the report RPCLSTRX.
U will get a screen where u have to enter a particular employee number ..
Then u will get a list of payroll periods for that pernr.
Now select any period and then you will find all the tables for that pernr..
Now select the RT and CRT tables and see the corresponding details for that pernr for the particular table......
Award points if the answer is useful for you...
Let me know if you have any doubts .......
Regards,
Naveen.

For what is the field SVER with type RSRSVER in structure RSDRI_S_SELNODE ?

Does anyone know what does the field SVER with type RSRSVER in structure RSDRI_S_SELNODE mean ??
Thx....

If this indicator is set, the material is costed using costing with a quantity structure (BOM and routing).
The system searches for any existing cost estimates with quantity structure for the individual materials; it ignores existing cost estimates without quantity structure. If the system does not find any valid costing data for the materials, it costs the material or accesses the price in the material master.
If this indicator is not set, the planned costs for the material are calculated using the cost estimate without quantity structure. In this case, you use unit costing to create the quantity structure manually by entering costing items for materials and activity types, for example.
The system now searches for any existing cost estimates without quantity structure. If a cost estimate without quantity structure exists for a material, the results of this cost estimate are included in a cost estimate with quantity structure. If there is no cost estimate without quantity structure, the cost estimate with quantity structure accesses the price in the material master record. The planned costs for this material then go into the cost estimate with quantity structure as raw material costs.
This does not apply if the indicator Ignore prod cost est w/o qty structure is set in the costing variant.

Adding fields to BUT000 and ensuring sync with SD

Hi
I have a requirement whereby I am adding 6 custom fields in BUT000 (all Z Fields), these fields should then be visible on the screens for the transaction FPP1 and FPP2. I am able to achieve this functionality by using BDT.
Whenever we create a Business Partner and populate the REF CUSTOMER field then an equivalent customer is created in SD (that is for XD01 we have a customer who is created). Now I want the customer who is created through FPP1 have those 6 custom fields populated and we are going to add the same six fields to KNA1 and KNVV and whatever data is entered in FPP1 should then get reflected in those table fields for that record.
Can anyone help me with the procedure?

I have a PB form that I have two user defined fields created.
In addition I've added two Comboboxes, that has a list of items that I'm using to populate the user fields.
Because, of this, I'm not populating the user fields in a standard way (Through the UDF Window). What I'm actually doing is, after I update my selection in the Combobox and press the update button, I capture the item press event for the button, then I check to see if the event has been handled by the system. If it has, I proceed and create a Business Partner object, then I get the record the system just updated and update its user defined fields with the data selected in the Combobox (Which is temporarly stored in a class variable).
This is when I get the error, but I only get the error if the user defined field is currently null. If there is a value in the field then I don't get the error.
Hope this help you to duplicate.

Can I use the fields Product allocation and Basic material for bifurcation of material

Dear Users,
We have a requirement for bifurcation of material so we need two field in material master for fulfilling the requirement. First requirement is material category like insurance or revenue etc., second requirement is department wise like electrical, maintenance etc, so i have choosen the fields 'Product allocation' in basic data 1 screen in material master for fulfilling department requirement and then in basic data 2 i have choosen 'Basic Material' field for fulfilling material category requirement. My doubt is whether this change will effect the reports and i need to know the effects of such changes.
Thanks,
Manoj

As you are trying to use the standard fields, so you can read the F1 help for these fields.
Also check in which table and program, the fields are used.
Read the F1 help and find the table and program by using this document How to find Table name for a Field which is shown structure name on press F1.
After reading this, If these fields are suitable for your requirement, then you can continue.
Regards
Dev

How can I prevent my previous login strings from showing when I starting typing. I'd rather the field stay blank and not start to fill in, based on previous entries.

I don't know what setting to change so that when I start typing my login (to an email account, etc), the previous entries do not show up. I want the field to start out and stay blank, and have me type the whoe string
== This happened ==
Every time Firefox opened
== has been, all along

Clear the Search and Form History, under Tools > Clear Recent History.
And, then turn off the Search and Form History so it won't save it anymore, in Tools > Options >> Privacy - select ''Use custom settings for history'', then un-select Search and Form History

How to include all the fields of a Table into a Structure.

How to include a Complete Table into a Structure.
I want to include all the fields of KNA1 into a structure say W_KNA1(A local structure declared within a program)....How this can b acheived.
Thanks in Advance.

if i want to use INCLUDE STRUCTURE.....how will it work.
TYPES : begin of ty_kna1,
INCLUDE STRUCTURE KNA1,
end of ty_kna1.
tell me this is correct stmt.

Change Pointers for the fields PERNR, GBDAT and PERID

Hi,
     I want to know, how we can delete/de-activate and then add/activate Change Pointers for these fields. Is my Question a valid one? Please guide me if I'm wrong and help me in this issue.
Thanks in advance,
Exertive.
Message was edited by:
        Exertive

Hi Suresh,
               I didn't get your point exactly. With this report, we can only Log the Changes that has been performed on a Particular Pernr or an Infotype. Actually, if see go through my Previous Post, you will get Clear Idea. Actually, I'm looking for the Concept below:
Actually, I'm using the Standard ALE Process for Masking Master Data fields (PERID and GBDAT) with default values from one system to another using the Message Type, HRMD_A (which will be used as a Standard Message Type for HR Personnel Administration and Organizational Management). For this, I' have used two Conversion Rules in the above Message Type. To make this ALE trigger, I have to Run the Report, RBDMIDOC. But, before trigerring the ALE for all the Employees in the System, I want to test the ALE for few Employees, whether it is working properly or not. For this, I think, I need to delete the Change Pointers for all the Employees except for the few Employees whom I want to Test. But, I don't have any idea, how to delete those Change Pointers. Please guide me some solution or provide me some document where I can find exact procedure for doing this. Guide me, If I'm going in wrong procedure.
Thanks in advance,
Exertive.

Change the field description of a field in MM01,MM02, and MM03 Transaction

Hi Experts,
I had a requirement to change the field description of a field in MM01,MM02, and MM03. I know how to change the description of field in CMOD. In my requirement they need this new description only in the above mention transaction. So please let me know how we can do this?
Regards,
Ram

Hi you can do this by SPRO transaction. Here you can copy the subscreen where you want the description of the field changed. And in the custom subscreen go to the Element list- >Texts I/O templates , Here you can change the description. After all this the customized subscreen is assigned in the proper sequence. The step by step process is below:
Step 1:
Click on the button u2018SAP Reference IMGu2019. Then follow the path Logistics-General -> Material Master -> Configuring the Material Master. When this particular node is expanded, a drop down list of 7 different executable options appears.
Step 2: Execute the option u2018Create Program for Customized Subscreensu2019
Step 3: Copy the screens required to the custom function group.
Step 4: In transaction SPRO, execute the option u2018Define Structure of Data Screens for each Screen sequenceu2019.
Step 5: Now in transaction SPRO execute the option Assign Screen sequences to User/ Material Type/ Transaction/ Industry Sector.

BUPT - New field at BUT000 - No BDOC

Hello,
i've added a new field to but000 with an append structure.
The field is shown in a new screen within the genaral data.
This new field was added with the posssibilities in BDT.
When i change the value of the field within transaction bp, the value is written to the database, but there was no BDOC created so that the data is send to the middleware.
The middleware is allready advanced, so that a data exhange between the backend R/3 system and the CRM Sytsem and the CDB is possible.
So what i've to do, that the middleware flow is triggerd when i change the field with transaction bp.
Best regards,
Strehle Thomas

From whatever you have said...where ever you are saving data in BUT000...select corresponding entries from JGTBP00 with BP as key..and them make changes in work area JGTBP00 and modify the data in the database table.

How to populate the field VTTK - EXTI1 in the shipment

Hi there,
I have a situation where I need to populate the field VTTK - EXTI1 with certain values, I would like to know if there is a user exit or badi to do this. Actually the field is empty and it's possible to enter any value.
Thanks in advance
Regards

I have found in the screen of shipments a program where the logic of PBO PAI could be changed.
INCLUDE mv56aozz. " User-modules PBO
INCLUDE mv56aizz. " User-modules PAI
However in the field vttk-exti1 I don't know how can I asociate a custom match code to this field using Abap code.
Any help will be appreciate.
Thanks in advance.
Alexis

Can we modify the pnp selection screen and get only month and year?

Dear Freinds,
              I have requirement where i have to modify the PNP selection screen. So with the help of report category and coding in AT SELECTION-SCREEN OUTPUT , i have modified all the fields relating to dates . i.e i have removed all the radio buttons (i.e Today, Current month,current year etc) and finally
i have landed with only Period ( PNPBEGDA & PNPENDDA range) . But i dont want the PNPBEGDA & PNPENDDA range , but i want only is the month and year ( i.e just like the PNPPABRP & PNPPABRJ)
on my selection screen along with the pernr .
i have used the below code to close all the fields except pnpbegda and pnpendda.
AT Selection-Screen output.
loop at screen.
IF screen-group4 = '098' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '092' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '094' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '100' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    IF screen-group4 = '104' .
      screen-input = '0'.
      screen-invisible = '1'.
    ENDIF.
    MODIFY SCREEN.
endloop.
i.e on my selection screen i want only month & year combination and pernr -
when iam using the logical database PNP . Could any one please let me know how can i get only mon & year only on my selection screen .
If it is possible please let me know .
Thanks & regards
divya.

Hi ,
   The requirement is that the user doesnt want to enter the date range i.e for ex: 01012008 to 31012008.
As per the requirement the user will enter only the month and year only . so i on the selection screen
i want only the month and year only . Is there any means i can modify the date period which is there by
default (PNPbegda and PNPendda) on PNP selection screen. Instead of we givign to the user the
PNPBEGDA and PNPPENDA i want is only month and year .
AS already the code has already been written and now they have asked that they want only the month and year on the selection screen.
Please suggest me in this regard.If iam hiding all the buttons relating the dates fields, and now if iam adding the parameters for the month and year it is coming below below the fields pernr , personnel ara and subara , company code , payroll area, employee group of the standard fields of PNP selection screen , there by any body could please suggest me how to change.
regards
divya.

How to clear the fields within copy routines in the copy contorl

HI Gurus,
I need to clear the fields VBP-VBELV and VBAP-PSSNV within the copy routines 303 in the copy control between quote item and sales order item. I am not sure how to do that... Can some body please help.
This is required because we had sales order and quote using the same requirement type which controls the special stock indicator. This leads to the stock getting update in quotation instead of the sales order, because the quotation is initiating document (collecting all cost etc).Now i know requirement should only be passed to production from sales order and not from quotation so i changed the config but there are some existing documents using same requirement type on both quotation and sales order and to correct those i need to clear fields VBP-VBELV and VBAP-PSSNV within the copy routines 303.
Please help!
Regards,
Sam

Hi ,
just use this code in ur save button action handler , this will clear the field after entered in to the database and will ready for the next set of data.
String password=wdContext.currentContextElement().getpwd();
try{
     InitialContext ctx=new InitialContext();
     DataSource ds=(DataSource)ctx.lookup("jdbc/SAPJ2EDB");
     Connection con=ds.getConnection();
     con.setAutoCommit(false);
     Statement stmt=con.createStatement();
     int retIns = stmt.executeUpdate("insert into TMP_NEWUSERDETAIL(PASSWORD) values("password")");
     con.commit();
     con.setAutoCommit(true);
     wdContext.currentContextElement().setpwd(null);
or use a seperate button to clear the field.
wdContext.currentContextElement().set<Attributename>(null);
Regards
Vijayakhanna Raman

All fields should be in Display mode except Plant field in Va02 and VA32

Respected Guru's,
I want all the fields in VA02 and VA32( Change t-codes) to be in display mode, further user should be able to change the Plant value alone in sales tab.
Is it possible to restrict it with the help of Authorization or does it requires customization.
Please Help me in this regard.
Thank tou,
Daya

Thanks for your information
What is the transaction code for that
ME29N - DISPLAY SCREEN SETTING ALREADY I HAVE DONE
account assignment category is working only at item overview level, input - k iS IN DISPLAY MODE
NOT account assignment tab fields
please give the transaction code information so that it will be helpful for me

Enchancing the field in But000 and in BAPIBUS1006_CENTRAL_PERSON Structure

Similar Messages

Maybe you are looking for