Encircle text or shape

How to encircle text or shape in PS Elements 11 (Dutch version)?
Followed instruction on help pages and read forums.
However when I select text or a shape (with or without making a new layer, 'encircle selection' option is not active.
How to solve this ?
Reg. Peter

Hello Barbara,
Just can not find the simplify option in the layer menu.
What now ?
Reg, Peter

Similar Messages

  • How do I  join text to shapes in pages?

    how do I join text to shapes in Pages?

    Just click inside the Shape and either type or paste.
    or
    select a Textbox and Shape by clicking on each with the command key held down > Menu > Arrange > Group
    Peter

  • How to center text in shapes

    how to center text in shapes. specifically circles.  I want text to be centered directly in the middle

    A lot depends on what you mean by centered, the number of lines of text, the actual font, and whether there are descenders.
    Using vertical justification set to centered may or may not work for you, depending on the above factors, as it depends on the baseline, I believe, rather than the acutal glyph dimensions. You could try adding baseline shift, I suppose, to make fine vertical adjustments, or you can bite the bullet and use the old-fashioned method of two frames.

  • Center text inside shape in titler?

    Is there any way to center text inside a shape within the titler?   For example let's say I use the Rounded Rectangle Tool to create a shape and put it in the lower third of title area, then use the Text Tool to type in a line of text.  For now I'm having to manually position the text over the shape.  Curious if there is anyway to get the equivalent of the Center buttons for a text on shape situation?   If my question / situation doesn't make sense here, I can post a screen shot.   Thanks.

    Once a post has a Reply, the OP cannot Edit, or Delete it - only a MOD can do so.
    However, as others might encounter the same issue, and could learn from this thread, I think that it would be good to keep it up.
    Yes, both Objects (whether Text, Shape, etc.) need to be Selected, to use the Alignment Tools. Glad that you found that.
    Good luck,
    Hunt

  • CAN Text Box/Shape with Text on top of Flash?

    Hi,
    i'm wondering, Do the Text Box/Shape with Text posible to put on top of the Flash?Do it able to read the Text after published?
    I'm scratching my head...Safari Have no problem to read it but Windows user can't read the text.
    Any idea?

    OGC Management wrote:
    ... if I checked the invert box it corrected the problem! 
    your going to chase your tail with that "solution".
    Select all (ctrl+a)(cmd+a) and set Text Wrap to none as shown.
    The item could be on a master page or a locked layer, but  you indicate you were able to modify the wrap attributes...

  • Want to use a text as shape without convert to shape. is it possible?

    I'm using PS6. Want to use texts as shape for path operations with custom shapes.
    hope can explain my problem.

    OK, we might be getting there. I'm guessing you want to remove the outline of a Type layer from  rectangular Shape.  Is that right?
    Create your rectangular shape.
    Create your Type layer
    Align the two layers.
    Convert the Type layer into a Shape layer.
    You'll have something like this:
    Select the two Shape layers and merge them (Ctrl e or Cmd e)
    Which will give you a single shape layer but this in the paths panel
    Use the Direct Selection tool (white arrow) to drag across and select the type oultine
    Now select the Pen tool, and in the Options bar click on Path Operations drop down, and select 'Subtract front shape'
    Which should leave you this (Note I have turn off the background layer for the sake of clarity)
    I sure hope that is what you are after, because it took me twenty minutes to produce the above illustrations.

  • Search text or shape data in SharePoint.

    Is there a way to search information like text or shape data in a Visio-drawing published on a SharePoint-site like you could do when saved as html?
    Staffan Söderholm

    Hi,
    As far as I know, we can search the text from html file on a SharePoint-site. Please see the below article:
    https://technet.microsoft.com/en-us/library/jj219530.aspx
    Then, this issue is more related to the SharePoint search, I recommend you post the question to SharePoint search forum:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointsearch
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Trying to get text to wrap ALL the way around either text, images, shapes in Mac Pages. I tried in Pages Word Processing

    I have tried everything to get text to "wrap completely around" other text, images, shapes.  Mac Pages - tried  Word Processing and tried Page Layout.  Inspector, wrap, Floating and Object causes wrap.  The text will ONLY wrap at the TOP and BOTTOM of the object, etc.  No matter which choice I make in Object causes wrapping.  It just doesn't work.  I have worked for hours on this - I can't find a solution.  HELP!

    What version of Pages?
    I suspect you are using Pages 5 in OSX 10.9 not OSX 10.8.4.
    Peter

  • Whenever i try to pin or try to give some effect on text or shapes it automatically got invisible !!

    Hello,
    I dont know what is wrong with my muse. One more problem, whenever i try to pin or try to give some effect on text or shapes it automatically got invisible !!! even do in master page or in home page it got invisbile. Please help me out and why this is happening to me. I am sick and tired of all trouble now.............

    A friend of mine called me today with the same issue. No idea how to resolve this, never heard of it before. She has a message that she used to forward before now permamently stuck. Even when she selects some other message to forward, that old text appears instead, thus making FW-ing unusable.
    Really weird.

  • HELP! Need help with converting text to shape.

    Each time I hit "Convert to shape" I get paths all over the text character. (See image below)
    Rather than a bounding box I can transform. (see below)
    It's almost as if the text is being converted to a work path even though I'm selecting "convert to shape". Not sure what's "off" or "wrong" but hopefully someone out there can point me in the right direction.
    Thanks!

    Really? Wow. No wonder.
    Ok, here's the thing. I'm watching a YouTube video on making bracket frames and the direction is to do what I've been attempting. Should have known better. Check out the video, link below, at about the 2min mark through 2:48ish. Can you let me know if this is accurate instruction?
    If you have time of course! Thank You Thank You Thank You!!
    Photoshop - Bracket Frames - YouTube

  • Can not Group text and shape/object

    I have previously made frequent use of grouping text and objects or images together. But in Keynote 4.0.2 this is not possible (for me at least). I am able to lock multiple images, but the group, mask and alpha buttons are not active when selecting a combination of the two (text and objects). Images or objects can be grouped together. Is this a bug or what ?

    Open a NEW presentation (it should default to the Title and Subtitle slide of the theme)
    Type some text into the Title
    Insert a shape (square)
    Select the shape and the Title
    You should see that you cannot group anything with either the Title or Subtitle object of a slide. If you want to group text to an object, you have to create a new text object. Would this describe your inability to group (ie. limited to when you have Title/Subtitle selected?)

  • Text in Shape of Zero ("0")

    Hello,
    I'm tring to insert hundreds of names into the shape of a zero (0), and while the text fills the overall circle shape, it does not respect in smaller inside o of the letter.  I do not want any text in the center part of the zero.  Example:
    XXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXX
    XXXXXX           XXXXXX
    XXXXXX           XXXXXX
    XXXXXX           XXXXXX
    XXXXXX           XXXXXX
    XXXXXX           XXXXXX
    XXXXXX           XXXXXX
    XXXXXXXXXXXXXXXXXX
    XXXXXXXXXXXXXXXXXX
    Thanks for your help!

    Put the letter '0' on a layer to the size you want, then on the layer above, input all the text you want to appear in the '0', then:
    Hold down Alt (Windows) or Option (Mac OS), position the pointer over the line in the Layers panel dividing the base layer and the first layer above it that you want to include in the clipping mask (the pointer changes to two overlapping circles ),  and click.
    Select the first layer above the base layer in the Layers panel, and choose Layer > Create Clipping Mask.
    there is more info in the help files, press F1 to read the article.

  • Fitting text inside shape (Justification?)

    Hi Guys,
    I'm trying to find a way to fit a text inside a shape and to align it exactly to the shape borders, I was trying to play with the justification panel under the paragraph link but couldn't make it work,
    I was trying to fit my text inside a shape look like the number 7 so eventually when a viewer see it they can recognize the number 7 without a stroke - only by the text insize the shape, above is an example of what happe when I try the same with a circular shape - I would like the test to fit in nicely filling the entire circle.
    Thanks,
    Raanan.

    The Justify all lines selection is key. Is this what you're looking for?

  • Scaling text and shape made in lower res file?

    I created a selection, filled it and put text on top of it in a 72 ppi file and copied the group to an image with much higher resolution. I transformed the shape and text to make it bigger. Does doing this affect quality? It looked ok, I'm just curious.
    Thanks.

    Vectors are resolution independant, so Shape layers and Type layers will scale without damage to edge quality.
    However, there's a pitfall if you place the 72 ppi document as a Smart Object in a 200 ppi document. The SO will be automatically scaled to maintain its size in inches in the new document. The fact that it is scaled isn't a problem in itself since you'd be doing that manually if it wasn't automatic. But when the SO is scaled, the pixel representation of its embedded document (not the embedded file itself which remains unchanged) will be scaled and (non-destructively) degraded by resampling in the same way as a regular pixel layer would be.
    You can avoid the SO scaling problem by opening the 72 ppi document, or a duplicate, and using Image > Image Size to resample it to 200 ppi. That higher resolution document can be used itself or it can be placed as a Smart Object in other 200 ppi documents.
    By the way, characters of a given size of font will be rendered with slightly different forms in documents of differing resolution to maintain legibility despite increasing pixelation in lower resolution documents.

  • Warping text to shape?

    Okay please bear with me: I don't use Illustrator a lot.  I'm trying to create a very simple logo where I want to add the letters "HAI" to a hard-hat image.  I'll paste in a screenshot below so you can see what I'm talking about.  Can someone tell me how to warp those 3 letters to fit the shape?  So it looks like they're really on the hat?  I'm experimenting with arc and free transform but not really getting anywhere.  Any suggestions?
    Thanks, Phyllis

    1. Type your text vertically (as you've done with "HAT")
    2. Use "Object>Envelope Distort>Make With Mesh". Choose "1 column and 1 row".
    3. Adjust the mesh corner points to match the surface you want the text to match.
    You can select more than one mesh point and control them as one using any of the move or transform tools. You can also use the Free Transform Tool very effectivelly to distort the whole mesh object. If you're not familiar with the Free Transform Tool modifyer key options read about it online.
    Hope this helps.
    Larry beat me.

Maybe you are looking for