"Enclosure Intrusion" error in Server Monitor

My Server Monitor app is showing a "Enclosure Intrusion" error on one of my Dual 2GHz Xserves that I cannot get rid of. I've checked, unlocked, relocked, etc. as well as updated to Firware 5.1.7f1 per instructions from an Apple dude.
No joy, any suggestions?

I would guess the sensor on the front of the Xserve is faulty, its just to the left of centre if you open the case and slide the Xserve out.
I have an Xserve that suffers from this too.
Ed

Similar Messages

10.5.7 broke Server Monitor

Prior to the upgrade, Server Monitor worked fine on the local machine and worked fine from remote machines. Now it works on the local machine, but not on remote machines.
I had Server Monitor up right before the upgrade and all was working well.
I launched it after the upgrade and now I get the "CANNOTLOAD_BUNDLEERROR" and "Software is not installed properly on server" errors.
Server Monitor is 1.7, it is the copy off the DVD and not one I downloaded.
I've read through quite a few other posts, but most deal with initial setup, not the 10.5.7 breaking Server Monitor.
Has anyone else had this happen?
Any suggestions?

Pope7 wrote:
I got distracted and had forgotten about this until I was working on some things today.
ServerMonitor is definitely running, and it still works fine locally.
Just to be clear...
Prior to the 10.5.7 update, Server Monitor on my remote machine pointed to the IP address of the server and not to a special LOM address, and it worked fine. Also, the server is only using eth0.
I can find a lot of documentation on how to setup the LOM if you're setting up the server for the first time. But I can't find any on honge or setup the LOM now?
In this case the entire LOM stuff probably doesn't apply to you. I tried to search XServe documenttion but only found the following snippet in XServe Setup ''Worksheet:
Lights-out management administrator
(Skip these settings unless your server is an Xserve with a lights-out management (LOM) port.)
Give the LOM interface its own IP address. Don’t use the same address that you assigned to built-in
Ethernet 1, even though it uses the same physical connector (port 1) on the back of the Xserve.
The LOM administrator account is not the same as the Mac OS X Server administrator account that
you configured earlier in the setup process, but you can use the same name and password if you
want to.
If Server Monitor worked remotely before 10.5.7 (but under 10.5 at least) then the whole LOM doesn't apply to your server. See more at
http://support.apple.com/kb/HT2773

CF8 on Apache: server monitor's flex2gateway 500 error

The basic problem has been fairly well documented elsewhere, but this is it in a nutshell:
When you attempt to bring up the server monitor (a Flex app) in CF 8, the monitor can fail to let you in, and instead display a 'Coldfusion Server is Unavailable' message. On the backend, I see this:
2011-06-13 17:58:55,051 ERROR [org.apache.catalina.core.ContainerBase.[jboss.web].[localhost].[/].[MessageBrokerServlet ]] Servlet.service() for servlet MessageBrokerServlet threw exception
flex.messaging.MessageException: No configured channel has an endpoint path '/flex2gateway/cfamfsecure/index.cfm'.
I've seen documentation on how to fix this in IIS and JRun, but we're using Apache 2.2 and JBoss.
Been scouring the Interwebs for a solution, but it's eluded me.
Can anyone help? Thanks much in advance.
Steve

Looks as though one solution is to bypass Apache by hitting CF Admin via the JBoss port that it's running on. As that's working for me, I'll mark this question as answered! :-)

Server Monitor error - "CANNOT LOAD BUNDLE ERR"

I got 2 Xserve(s) intel based - 1 installed 10.6.8 and the other 10.5.8 - both server(s) are upto date on software updates.
Server Monitor works fine on both of these server(s) when run locally (from the server). When I run the Server Monitor from my local machine (still in the same network), the server with 10.5.8 works fine, but the server with 10.6.8 shows the error "CANNOT LOAD BUNDLE ERR". I am not sure where I am making a mistake.
Any help highly appreciated..:)
Regards,
-Raj.

I'm having the same problem. Were you able to fix it?
Thanks

Server monitor reporting a memory error

Every 10 mins or so, Server monitor flashes a red dot on Memory Slot 2 (dot number 3 on the status screen) on our Intel XServe. There is an Apple supplied 1024MB (1 gig) chip in there, ECC DDR2 FB-DIMM
It reports...
ECC Error # 1
It flashes for about 10 mins or so and then goes back to green.
Any idea what this is? Is it a dodgy chip that I need to replace or is it the EEC doing it's thing and correcting a memory error?

Any idea what this is? Is it a dodgy chip that I need to replace or is it the EEC doing it's thing and correcting a memory error?
Both.
The upshot is that the DIMM is having problems, however, the problems are within the ECC's ability to correct, so it's not impacting the server's performance.
It's not uncommon to find a few ECC errors over time, but if the number of errors is increasing every 10 minutes or so (as opposed to just staying the same) then it indicates enough of a problem that I'd look to replace the DIMM ASAP.

Coldfusion 9 Server Monitoring - Can't find "Last Error" log

Hi,
Perhaps this is a stupid question, but I cannot locate where does Coldfusion write all the error details that it reports under "Last Error" in Coldfusion Server Monitor.
I am trying to get to the bottom of a pesky error message, but can't get any more information on it without looking at the actual logs. I tried application.log but errors there are very very old and not the ones that CF Monitor is reporting.
Here is the screenshot of what I mean:
Thanks for any suggestions!
Sasha.

Hi Sasha,
There are no such things as stupid questions tho there are dumb answers, hope this is not one of the latter.
There are two ways. Double click under Reports - requests with errors.
Or select Statistics tab > Errors menu > request with errors.
HTH, Carl.
PS
this may help CF dev week event -
http://www.adobe.com/devnet/coldfusion/events.html
Watch the excellent recorded session by Charlie Arehart on understanding CF Monitor:
http://www.adobe.com/cfusion/event/index.cfm?id=1886254&event=register_no_session&loc=en_u s

Yellow status on Enclosure intrusion

Hi, I've got a yellow status in server monitor for enclosure intrusion, but the it's not really clear what this means. The label in the details under the Security tab says "Enclosure Intrusion: <yellow orb> Yes".
Does this mean yes, it's okay, or yes, intrusion has been detected? Being yellow one would think there's a problem. But under "Security Lock" it says "Locked".
Anyone want to interpret this for me? No one's been in the rack, the machine appears just fine, it's just blinking yellow.

Michael,
The intrusion error means that some how the top case has been opened. Maybe it slid back accidentally. If so this would set off the alert. It could also be that the sensor is malfunctioning.
Basically check the top cover and make sure it is secure and all the way on.

How to turn off Enclosure Intrusion warning

One of my co-workers opened our Xserve G5 very slightly to adjust it in the rack, now when I go into Server Monitor the Enclosure Intrusion warning light is on. How do I turn this off. Rebooting hasn't helped. I recently reinstalled the server to upgrade it from 10.3 to 10.4 and that didn't turn off the warning either.
Xserve G5 Single 2.0 GHz CPU Mac OS X (10.4.4)

There really is no enclosure intrusion light on any Xserve.
There is a light that indicates if the enclosure is locked. If it's that light you are referring to, just use the key to turn it completely counter clockwise.
The other light is the system identifer light which can turn on for a variety of reasons (for example opening the server enclosure).
If it the light is on permanently, this could indicate a hardware issue, lke a degraded mirror, failing fan, RAM, etc.
If you want to know what tripped it, just open the console application (as admin/root), expand the /var/log tab and look for the hwmond.log file. This will tell you what caused it.
Otherwise use the Server Monitor application (add server if not listed) and see if everything has a green light)
Hope this helps...

HOW TO: Relay/Send email from websites, Server Monitor in OS 10.5 Server

If you don't want to run your own mail server or configure DNS on your Xserve, but you still want your website or applications like Server Monitor to send email notifications; this is what you need to do:
Scenario: Mac OS 10.5.2 Leopard - Advanced Configuration - Setup is for strictly sending emails through SMTP, routed through your ISP or another provider. This is not for receiving emails.
-Open up Server Admin
If you have yet to add in a server to admin, you need to do so. Resource PDFs on setting up OS X Server are available at Apple http://www.apple.com/server/macosx/resources/ and there are video tutorials at http://movielibrary.lynda.com/html/modPage.asp?ID=373
-Click on your server, then choose the Settings button
-Then choose Services from the Tabs/Buttons below
-Select the Mail checkbox and then hit Save
-Now choose the newly added Mail service in the left pane, then click the Settings button up top
-Start with the Advanced tab. Under Security, un-check everything and don't use SSL unless you want to. You don't need to mess with the other sub-tabs here.
-Next choose the Logging Tab. Under SMTP log level, choose debug so you will be able to see what goes on in the log.
-Mailing List, Quotas and Filters tabs can go untouched. You can mess with them later if you want.
-Click the Relay tab. It is a good idea to only accept relays from your local machine. If you uncheck this, I believe it leaves you with an open relay that anybody can access.
-Now for the General Tab. Under Domain Name put anything you want. Any made up name and extension is fine.
Under Host Name, again put anything you want.
Un-check Enable POP, Un-check Enable IMAP - Basically un-check everything
Check or leave checked Enable SMTP
Now check Relay outgoing mail through host:
Then enter your hosts SMTP server. ex. smtpout.secureserver.net
Now check Authenticate to relay with user name: and enter your username and password
-Now hit the Save button
-Now we need to take a look at the main.cf file and add a few things
-If you aren't showing all files in Finder already, open up Terminal.app
Now type in: defaults write com.apple.Finder AppleShowAllFiles True
Hit enter
Now type in: killall Finder
Now Finder should reset and all files should be visible - To hide all files, do the same thing but type False
-Now open Macintosh HD and navigate to /private/etc/postfix/main.cf (Note: you won't be able to open and edit this in TextEdit. I recommend a program like TextWrangler http://www.barebones.com/products/textwrangler/download.shtml )
-Once you have main.cf open, all your settings should be together at the bottom of the doc. Scroll down. You will need to add in a few lines and verify all the settings are exactly as below (except of course your own names and SMTP server):
readme_directory = /usr/share/doc/postfix
mydomain_fallback = anything.anyting
messagesizelimit = 0
myhostname = anything.anything
mailbox_transport = cyrus
mydomain = anything.anything
mailboxsizelimit = 0
enableserveroptions = yes
inet_interfaces = all
relayhost = smtpout.secureserver.net
smtpsasl_passwordmaps = hash:/etc/postfix/sasl/passwd
smtpsasl_authenable = yes
smtpdsasl_authenable = no
smtpsasl_securityoptions =
smtpduse_pwserver = no
smtpdrecipientrestrictions = permitmynetworks,reject_unauthdestination,permit
smtpdpw_server_securityoptions = none
-Now save the main.cf document
-Now go back to Macintosh HD and navigate to /private/etc/postfix/sasl/passwd
Open passwd with TextWrangler or you editing app, and verify that your SMTP server, username and password are correct. It should look something like this:
smtpout.secureserver.net [email protected]:password
-This should be what you entered in Server Admin when you first started. If all is well, quit your editing app.
-Now, while you are still at /private/etc/postfix/sasl/passwd you need to edit permissions for passwd
You can chmod in Terminal.app or secondary click on passwd and "Get Info"
Click the lock and enter your password to unlock the settings
Next click the + button and add yourself and Admin
-Now you can close out of everything and go back to Server Admin
-Hit the Reload (twisty arrow) button at the bottom and once everything is reloaded, hit Start Mail
-Now type localhost in your browser to see if your website can send email. You can also open up other apps such as Server Monitor and do something to change the status to have it send an email.
-You can click on Mail in the Server Admin and then view the SMTP log. As long as emails are being sent and then removed from the queue, you are in good shape. If you are getting an SASL error or mechanism error, open up main.cf and verify your settings and/or check permissions on passwd file

Don't you need the Mail service running to have apps like Server Monitor send email notifications? - Also for hosted sites that use the sendmail function you need a service running to get the emails sent.
Really you are not hosting a Mail server. It is open, but there is no incoming and if you only accept SMTP relays from the local machine, there should be no issues.

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

System Error in Message Monitoring -Proxy to SOAP async scenario

Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
Jyoti

Hi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo

Wrong port in FTP receiver adapter - no errors in message monitoring?

Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
Renaud

Hi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud

Error in Component Monitoring(Runtime Workbench)

Hi,
I am getting an error in component monitoring section of runtime workbench. I got a note(851711), where it says 'CompilingException' error can be corrected by applying SP14. But I am still getting same error after applying SP14 and redeploying XI ADAPTER FRAMEWORK CORE 3.0 (SAPXIAFC.sca), XI TOOLS 3.0 (SAPXITOOL.sca) and XI ADAPTER FRAMEWORK 3.0 (SAPXIAF.sca). Please advice how to correct this error.
Error Message:
com.sap.engine.services.servlets_jsp.server.jsp.exceptions.CompilingException: Error while executing the compilation process: D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:27: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) import com.sapportals.htmlb.enum.TableCellStyle; ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:947: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.setColumnType(com.sapportals.htmlb.enum.TableColumnType.IMAGELINK, 1); ^ D:/usr/sap/QN7/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb/work/jsp_component_monitoring1138903402125.java:948: as of release 1.5, 'enum' is a keyword, and may not be used as an identifier (try -source 1.4 or lower to use 'enum' as an identifier) compTable.getColumn(1).setCellHAlignment(-1, com.sapportals.htmlb.enum.CellHAlign.CENTER); ^ 3 errors .
Thanks,
Ask.

Hi,
it can be for some system configured on http destination or the sld system configured for this server.
take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
regards.
roberti

Does the Server Monitor work on PowerPC based machine (w/o LOM)?

I tried using the Server Monitor locally on a PowerPC G4 machine which has 10.5.1 server installed. I always get a "Failed to connect to server" error message, except if I try 127.0.0.1 with the original local admin, then I would get a "User and or Password" error.
Strangely, the username of the admin is M999, but if i type in "M999" as username, I would still get a "Failed to connect to server" error, while if I use "m999" as username, I get a user name password error. Either way, I couldn't use Server Monitor.
So I am wondering whether Server Monitor support machines w/o LOM at all? Is there an trick I should know about?
Thanks
Kenneth

Hi
There is no trick you need to know. Its really quite simple, Server Monitor only works with XServes. Apple added LOM capability when they rolled out the Intel XServe.
http://docs.info.apple.com/article.html?artnum=304870
http://docs.info.apple.com/article.html?artnum=304896
http://docs.info.apple.com/article.html?artnum=304897
For more informaiton. Hope this helps, Tony

JMS Internal Error at Server Client Adapter!JMS Service is not started

Hi
Can any one tell me how to trouble shoot for following errors:
Failed to Create Connection! Reason: Response from the server could not be reached.
JMS Internal Error at Server Client Adapter!JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310
We are trying to send the request from SONICMQ JMS to R/3 and trying to post the response to Sonic Queue. but we are facing some problems for JMS adapter .
but in JMS sender and receiver adapter i gave different IP and port for listen the SONIC queue. why it is showing in different IP here? this message got from logviewer.
regards
Rambarki...

Rambarki,
What is the error displayed on the Adapter Monitoring pages?
Generally the correct error descriptions for connectivity issues are found on adapter monitoring UI than any other.
Other possible reasons could be :
<i>JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310</i> This might be issue with your network settings i.e. XI server is unable to reach the specified IP on specified port.
Regards,
Amol

"Enclosure Intrusion" error in Server Monitor

Similar Messages

Maybe you are looking for