Encoding failed with error -43
I push "burn" and the error message: "Encoding of (file name.mov) failed with error -43" pops up immediately upon beginning the encode phase.
This just started today...can't figure out what is different from yesterday...I am importing 16x9 anamorphic Quicktime files (audio and video, directly exported from Final Cut Pro and re-formatted for aspect ratio through QTPro. No menu, no jumps, nothing but video/audio with "first Start" in the track (set for 16x9 letterbox display mode)...
any suggestions? I am dead in the water...
Welcome to the boards
Try sending the movie to Compressor and encode in there (as m2v and ac3 file) then bring those in
Similar Messages
-
Encoding failed with "Error Compiling Movie, Unknown Error"
Hi,
I have come across this error while encoding an NTSC STD sequence to H.264 format, NTSC STD preset. The sequence has few simple effects and titles and its lenght is approx 2min. When same sequence is encoded to FLV, the encode passes. Also, when i encode using inline AME through Export Now, the encode passes. The failure is seen when i encode this sequence using Dynamic Link.
System Configuration :
4 GB RAM, Intel I 3 processor, 64bit Win 7, nVidia CUDA card with 512 MB memory.
If any other information is required, please let me know.
Thanks,
PrateekI forgot to mention in my original post I was able to export a microsoft avi file of the movie before I added the after effects sequences it appears the AE portions are causing the encoding errors.
Eric -
Adobe creative suite 5.5 Master collection をインストールしようとしたところ、2枚目のCDをいれたところで、下記のようなエラーが出て、インストールできません。
（エラー内容が多いので、最下部に表示します）
どのようにしたら、インストールできますでしょうか？
再起動し、何度、インストールしても、同じ結果となります。
なお、パソコンの環境は以下のとおりです。
宜しくお願いします
■■■■■■■インストール環境■■■■■
Windows 7 Professional SP1
Dell Optiplex 3020 メモリ４G 64ビットOS HDDの空き容量343G
他のadobe 製品はすべてアンインストールされており、フォルダも削除済み
■■■■■■エラー内容■■■■■■■■
インストールのステータス
インストールでエラーが発生しました。
システムを再起動して、再度インストールを実行してください。
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 150 error(s), 151 warning(s)
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {C0329E33-DEB4-48D9-B7B6-19493A6F062E} Adobe After Effects CS5.5 10.5.0.0 but isn't free. Reason: Language not supported
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {8F366029-8F3C-4400-BB65-7BFD1A58F200} Adobe Story 1.0.0.0 is required by {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34} Adobe Premiere Pro CS5.5 5.5.0.0 but isn't free. Reason: Language not supported
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1620 - このインストール パッケージを開くことができませんでした。アプリケーション ベンダーに問い合わせ、この Windows インストーラー パッケージが有効かどうかを確認してください。
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe ExtendScript Toolkit CS5.5: Install failed
ERROR: DW050: - Adobe Buzzword CS5.5: Install failed
ERROR: DW050: - GermanSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe Dreamweaver CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Flash CS5.5_AdobeFlash11.5-ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Linguistics CS5 x64: Install failed
ERROR: DW050: - AIR for Apple iOS support (FB): Install failed
ERROR: DW050: - Digital Publishing: Failed due to Language Pack installation failure
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Premiere Pro CS5.5 Support: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5.1 Core_x64: Failed due to Language Pack installation failure
ERROR: DW050: - Recommended Common Fonts Installation x64: Install failed
ERROR: DW050: - Suite Shared Configuration CS5.5: Install failed
ERROR: DW050: - AdobePDFL x64 CS5: Install failed
ERROR: DW050: - Adobe Fireworks CS5.1_AdobeFireworks11.1.0ja_JPLanguagePack: Install failed
ERROR: DW050: - DynamiclinkSupport: Install failed
ERROR: DW050: - Adobe Contribute CS5.1_AdobeContribute6.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1_AdobeOnLocation5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: DW050: - IE Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Encore CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - ItalianSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Pixel Bender Toolkit: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64: Install failed
ERROR: DW050: - Adobe Hunspell Linguistics Plugin CS5.5: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Adobe Encore CS5.1_AdobeEncore5.1ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - SpanishSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1 Third Party Content: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Premiere Pro CS5.5_AdobePremierePro5.5ja_JPLanguagePack: Install failed
ERROR: DW050: - Adobe Extension Manager CS5.5: Install failed
ERROR: DW050: - Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll: Install failed
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5.5: Install failed
ERROR: DW050: - Firefox Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Linguistics CS5.5: Install failed
ERROR: DW050: - Adobe Device Central CS5.5: Failed due to Language Pack installation failure
ERROR: DW050: - Office Plugin CS5.1: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5.1: Install failed
ERROR: DW050: - AdobeMotionPicture CS5.5: Install failed
ERROR: DW050: - Adobe SING CS5: Install failed
ERROR: DW050: - Adobe InDesign CS5.5 Application Language Files_AdobeInDesign7xAppLang-ja_JP: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe OnLocation CS5.1: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe After Effects CS5.5 Third Party Content: Install failed
ERROR: DW050: - Adobe Audition_AdobeAudition4ja_JPLanguagePack: Install failed
ERROR: DW050: - Photoshop Camera Raw (64 bit): Install failed
ERROR: DW050: - Adobe After Effects CS5.5 Template Projects & Footage: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Adobe Flash Builder 4.5: Install failed
ERROR: DW050: - Adobe Media Encoder CS5.5 X64: Install failedありがとうございます！試してみます。
とはいえ、同じCDを使って、別のパソコンには普通にインストールできました。
なので、CDの問題ではないような気もします。（ひょっとしたら、そのパソコンのCDの読み込みがよくないのかもしれませんが）
さておき、いったん、ダウンロード版で試してみます～ -
All was working great until I had a session in Adobe Connect Pro.
Now FMLE 3.1 Crashes and gives me Failed with error 80040273
I removed the Adobe Connect Pro Plugin and driver.
Re-installed FMLE 3.1 and still the same error
XP Pro SP3
Intel Core2 Quad Q6700 @ 2.66GHz
2GB RAM
Here's the log
=================================================================
File: C:\Program Files\Adobe\Flash Media Live Encoder 3.1\FlashMediaLiveEncoder.exe
Description: Adobe® Flash® Media Live Encoder
Copyright: © 2009 - 10 Adobe Systems Incorporated. All Rights Reserved. Adobe, the Adobe logo, and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. <AdobeIP#0000716>
Version: 3.1.0.8703
=================================================================
Mon May 17 2010 13:22:42 : Selected video input device: Digital Rapids DRC-1X00, 2X00 (Ch 1)
Mon May 17 2010 13:22:43 : Selected audio input device: Digital Rapids DRC-1X00, 2X00 (Ch 1)
Mon May 17 2010 13:22:43 : Failed with error 80040273:pVMRFilterConfig->SetNumberOfStreams(1)
Mon May 17 2010 13:22:45 : Audio source does not support the selected sample rate and/or channels. Re-sampling the audio to desired setting.
Mon May 17 2010 13:22:45 : The selected audio device "Digital Rapids DRC-1X00, 2X00 (Ch 1)" doesn't allow setting volume intensity. Disabling the volume slider control.
Mon May 17 2010 13:22:46 : Display Color Quality Warning : Display color quality is currently lower than 32 bit. Colors in video display may be distorted when encoding is not on. To change the display color, open the Display Properties, Settings tab and change color quality to 32 bit.Can anyone help with this?
-
Time Machine copy failed with error:28
Usually I just say OK when Time Machine can't complete a backup in either my computer or my wife's, and a couple of months later I get the irritating message again.
This time, it keeps returning. I have no idea what to do:
Here's a log:
2/16/13 3:46:23.127 PM com.apple.backupd[1325]: Starting automatic backup
2/16/13 3:46:23.914 PM com.apple.backupd[1325]: Backing up to: /Volumes/FreeAgent GoFlex Drive/Backups.backupdb
2/16/13 3:46:29.390 PM AppleMobileSync[1329]: [0x10020c310] |ISyncManager|Warning| Could not retrieve ISyncClient with id com.apple.Keychain!
2/16/13 3:46:29.398 PM SyncServer[1315]: [0x7fd152c0bec0] |SyncManager|Error| sync alert tool for com.apple.Mail is invalid: can't find /System/Library/Frameworks/Message.framework/Resources/MailSync
2/16/13 3:46:29.416 PM com.apple.backupd[1325]: Using file event preflight for Macintosh HD
2/16/13 3:46:36.243 PM com.apple.backupd[1325]: Will copy (8.16 GB) from Macintosh HD
2/16/13 3:46:36.441 PM com.apple.backupd[1325]: Found 1464 files (8.16 GB) needing backup
2/16/13 3:46:36.478 PM com.apple.backupd[1325]: 11.28 GB required (including padding), 13.29 GB available
2/16/13 3:46:43.180 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/Mailboxes/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94014.emlx : No such file or directory
2/16/13 3:47:09.883 PM mdworker[1337]: Unable to talk to lsboxd
2/16/13 3:47:09.887 PM mdworker[1335]: Unable to talk to lsboxd
2/16/13 3:47:09.892 PM mdworker[1336]: Unable to talk to lsboxd
2/16/13 3:47:09.896 PM mdworker[1334]: Unable to talk to lsboxd
2/16/13 3:47:10.000 PM kernel[0]: Sandbox: sandboxd(1343) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:47:10.414 PM sandboxd[1343]: ([1337]) mdworker(1337) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.460 PM sandboxd[1343]: ([1335]) mdworker(1335) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.525 PM sandboxd[1343]: ([1336]) mdworker(1336) deny mach-lookup com.apple.ls.boxd
2/16/13 3:47:10.625 PM sandboxd[1343]: ([1334]) mdworker(1334) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.630 PM mdworker[1359]: Unable to talk to lsboxd
2/16/13 3:49:19.635 PM mdworker[1360]: Unable to talk to lsboxd
2/16/13 3:49:19.711 PM sandboxd[1362]: ([1359]) mdworker(1359) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:19.716 PM sandboxd[1362]: ([1360]) mdworker(1360) deny mach-lookup com.apple.ls.boxd
2/16/13 3:49:20.000 PM kernel[0]: Sandbox: sandboxd(1362) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:49:36.358 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 3:49:38.090 PM SyncServer[1365]: [0x7fc8f0c0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 3:50:01.568 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:01.570 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 3:50:28.401 PM mdworker[1368]: Unable to talk to lsboxd
2/16/13 3:50:28.405 PM mdworker[1367]: Unable to talk to lsboxd
2/16/13 3:50:28.000 PM kernel[0]: Sandbox: sandboxd(1373) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:50:29.094 PM sandboxd[1373]: ([1368]) mdworker(1368) deny mach-lookup com.apple.ls.boxd
2/16/13 3:50:29.100 PM sandboxd[1373]: ([1367]) mdworker(1367) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:12.017 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Sent Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94034.emlx : No such file or directory
2/16/13 3:52:34.652 PM mdworker[1383]: Unable to talk to lsboxd
2/16/13 3:52:34.884 PM mdworker[1384]: Unable to talk to lsboxd
2/16/13 3:52:34.939 PM mdworker[1382]: Unable to talk to lsboxd
2/16/13 3:52:34.950 PM mdworker[1385]: Unable to talk to lsboxd
2/16/13 3:52:34.997 PM sandboxd[1390]: ([1383]) mdworker(1383) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.003 PM sandboxd[1390]: ([1384]) mdworker(1384) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.008 PM sandboxd[1390]: ([1382]) mdworker(1382) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.013 PM sandboxd[1390]: ([1385]) mdworker(1385) deny mach-lookup com.apple.ls.boxd
2/16/13 3:52:35.000 PM kernel[0]: Sandbox: sandboxd(1390) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:21.305 PM Dock[138]: no information back from LS about running process
2/16/13 3:54:21.309 PM lsboxd[233]: @AE relay 61657674:6f646f63
2/16/13 3:54:21.000 PM kernel[0]: Sandbox: sandboxd(1401) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:54:24.631 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800c60> { count = 2, contents =
"query" => <string: 0x7ffc64800dc0> { length = 105, contents = "com_apple_ats_name_postscript == "Arial,Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.632 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:24.808 PM com.apple.XType.FontHelper[1406]: FontHelper: message received. (<dictionary: 0x7ffc64800810> { count = 2, contents =
"query" => <string: 0x7ffc64800970> { length = 111, contents = "com_apple_ats_name_postscript == "Arial,BoldItalic" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff74932320>: true
2/16/13 3:54:24.809 PM com.apple.XType.FontHelper[1406]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
2/16/13 3:54:25.052 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Preview" for over 1.00 seconds. Server has re-enabled them.
2/16/13 3:54:25.584 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Preview" after 1.53 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 3:54:30.628 PM sandboxd[1401]: ([192]) Mail(192) deny file-read-data /Users/HBrazee/Library/Preferences/com.apple.DownloadAssessment.plist
2/16/13 3:54:49.692 PM mdworker[1411]: Unable to talk to lsboxd
2/16/13 3:54:49.696 PM mdworker[1410]: Unable to talk to lsboxd
2/16/13 3:54:49.818 PM sandboxd[1416]: ([1411]) mdworker(1411) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:49.823 PM sandboxd[1416]: ([1410]) mdworker(1410) deny mach-lookup com.apple.ls.boxd
2/16/13 3:54:50.000 PM kernel[0]: Sandbox: sandboxd(1416) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:55:11.964 PM WindowServer[102]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
2/16/13 3:55:11.986 PM Mail[192]: open on /Users/HBrazee/Library/Mail/V2/POP-brazee.net/[email protected]/Deleted Messages.mbox/9032643A-C8BE-4195-B233-E5A6A64E535C/Data/4/9/Messages/94057.emlx : No such file or directory
2/16/13 3:57:17.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1438[GoogleSoftwareUp] clearing CS_VALID
2/16/13 3:57:19.177 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:19.332 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
2/16/13 3:57:19.445 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
2/16/13 3:57:19.554 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x585250
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x582eb0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x292b10
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:19.867 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2973e0
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:29.555 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x298e70
server=<KSOmahaServer:0x292b10>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53810"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:29.864 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:29.934 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:29.937 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:29.938 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:29.942 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:30.431 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
2/16/13 3:57:30.434 PM GoogleSoftwareUpdateDaemon[1440]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
2/16/13 3:57:30.476 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x28ec80
productID=com.google.Chrome
version=24.0.1312.57
xc=<KSPathExistenceChecker:0x29adc0 path=/Applications/Google Chrome.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-18 13:11:31
tagPath=/Applications/Google Chrome.app/Contents/Info.plist
tagKey=KSChannelID
brandPath=/Library/Google/Google Chrome Brand.plist
brandKey=KSBrandID
versionPath=/Applications/Google Chrome.app/Contents/Info.plist
versionKey=KSVersion
>,
<KSTicket:0x29fe80
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2977f0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2010-06-26 00:04:18
>
Using server: <KSOmahaServer:0x595c80
engine=<KSDaemonUpdateEngine:0x287110>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.Google.GoogleEarthPlus.intel" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
LastActiveDate = 2012-11-25 19:27:11 +0000;
LastActivePingDate = 2012-11-26 08:00:15 +0000;
"com.google.Keystone" = {
LastRollCallPingDate = 2013-02-16 08:00:39 +0000;
LastActivePingDate = 2013-02-16 08:00:39 +0000;
LastActiveDate = 2013-02-16 22:57:18 +0000;
"com.google.musicmanager" = {
LastActivePingDate = 2012-07-29 06:59:48 +0000;
LastActiveDate = 2012-07-28 19:04:42 +0000;
LastRollCallPingDate = 2013-02-16 08:00:38 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.2_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
2/16/13 3:57:30.577 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x290140
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.2_i486"></o:os>
<o:app appid="com.google.Chrome" version="24.0.1312.57" lang="en-us" installage="974" brand="GGRM">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="966" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
2/16/13 3:57:31.427 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x29a970
server=<KSOmahaServer:0x595c80>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="53812"></daystart>
<app appid="com.google.Chrome" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
2/16/13 3:57:31.430 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
2/16/13 3:57:31.479 PM GoogleSoftwareUpdateDaemon[1440]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
2/16/13 3:57:31.480 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
2/16/13 3:57:31.482 PM GoogleSoftwareUpdateDaemon[1440]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
2/16/13 3:57:31.487 PM GoogleSoftwareUpdateDaemon[1440]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
2/16/13 3:57:33.732 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
2/16/13 3:57:49.201 PM GoogleSoftwareUpdateDaemon[1440]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
2/16/13 3:58:22.082 PM mdworker[1575]: Unable to talk to lsboxd
2/16/13 3:58:22.088 PM mdworker[1576]: Unable to talk to lsboxd
2/16/13 3:58:24.000 PM kernel[0]: Sandbox: sandboxd(1580) deny mach-lookup com.apple.coresymbolicationd
2/16/13 3:58:25.365 PM sandboxd[1580]: ([1575]) mdworker(1575) deny mach-lookup com.apple.ls.boxd
2/16/13 3:58:25.469 PM sandboxd[1580]: ([1576]) mdworker(1576) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.358 PM mdworker[1587]: Unable to talk to lsboxd
2/16/13 3:59:36.362 PM mdworker[1586]: Unable to talk to lsboxd
2/16/13 3:59:36.503 PM sandboxd[1588]: ([1587]) mdworker(1587) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.508 PM sandboxd[1588]: ([1586]) mdworker(1586) deny mach-lookup com.apple.ls.boxd
2/16/13 3:59:36.000 PM kernel[0]: Sandbox: sandboxd(1588) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:08.980 PM firefox[1592]: invalid drawable
2/16/13 4:00:10.701 PM WindowServer[102]: CGXDisableUpdate: UI updates were forcibly disabled by application "Firefox" for over 1.00 seconds. Server has re-enabled them.
2/16/13 4:00:10.813 PM WindowServer[102]: reenable_update_for_connection: UI updates were finally reenabled by application "Firefox" after 1.11 seconds (server forcibly re-enabled them after 1.00 seconds)
2/16/13 4:00:24.543 PM com.apple.usbmuxd[27]: _SendAttachNotification (thread 0x7fff73d59180): Device 1c:ab:a7:98:32:58@fe80::1eab:a7ff:fe98:3258._apple-mobdev._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
2/16/13 4:00:26.787 PM SyncServer[1604]: [0x7f9f7ac0bec0] |DataManager|Warning| Client com.apple.Mail sync alert tool path /System/Library/Frameworks/Message.framework/Resources/MailSync does not exist.
2/16/13 4:00:30.376 PM mdworker[1594]: Unable to talk to lsboxd
2/16/13 4:00:30.379 PM mdworker[1595]: Unable to talk to lsboxd
2/16/13 4:00:30.468 PM sandboxd[1606]: ([1594]) mdworker(1594) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.481 PM sandboxd[1606]: ([1595]) mdworker(1595) deny mach-lookup com.apple.ls.boxd
2/16/13 4:00:30.000 PM kernel[0]: Sandbox: sandboxd(1606) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:00:43.702 PM iTunes[203]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:00:43.705 PM ath[254]: _NotificationSocketReadCallbackGCD (thread 0x7fff73d59180): Unexpected connection closure...
2/16/13 4:01:42.495 PM mdworker[1611]: Unable to talk to lsboxd
2/16/13 4:01:42.499 PM mdworker[1612]: Unable to talk to lsboxd
2/16/13 4:01:42.599 PM sandboxd[1613]: ([1611]) mdworker(1611) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.608 PM sandboxd[1613]: ([1612]) mdworker(1612) deny mach-lookup com.apple.ls.boxd
2/16/13 4:01:42.000 PM kernel[0]: Sandbox: sandboxd(1613) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:02:01.167 PM WindowServer[102]: CGXSetWindowProperty: Invalid window 0x131
2/16/13 4:02:01.167 PM WindowServer[102]: kCGErrorIllegalArgument: _CGXAddWindowToWindowOrderingGroup: error setting window property
2/16/13 4:02:29.971 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:02:29.972 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:02:29.000 PM kernel[0]: HFS: Low Disk: Vol: FreeAgent GoFlex Drive freeblks: 38399, warninglimit: 38400
2/16/13 4:02:55.923 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
2/16/13 4:02:55.000 PM kernel[0]: HFS: Vol: FreeAgent GoFlex Drive Very Low Disk: freeblks: 25599, dangerlimit: 25600
2/16/13 4:02:55.926 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk, very low disk
2/16/13 4:02:55.929 PM mds[39]: (Warning) Volume: Indexing reset and suspended on backup volume "/Volumes/FreeAgent GoFlex Drive" because it is low on disk space.
2/16/13 4:03:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1474 [cfprefsd]
2/16/13 4:03:43.211 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[1406]) Exited: Killed: 9
2/16/13 4:03:43.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:43.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1406 [XType.FontHelper]
2/16/13 4:03:52.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
2/16/13 4:03:52.000 PM kernel[0]: macx_swapon SUCCESS
2/16/13 4:03:52.849 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1218]) Exited: Killed: 9
2/16/13 4:03:52.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1218 [com.apple.iCloud]
2/16/13 4:03:53.571 PM mdworker[1619]: Unable to talk to lsboxd
2/16/13 4:03:53.000 PM kernel[0]: Sandbox: sandboxd(1627) deny mach-lookup com.apple.coresymbolicationd
2/16/13 4:03:53.585 PM mdworker[1622]: Unable to talk to lsboxd
2/16/13 4:03:53.672 PM sandboxd[1627]: ([1619]) mdworker(1619) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.677 PM sandboxd[1627]: ([1622]) mdworker(1622) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.690 PM mdworker[1621]: Unable to talk to lsboxd
2/16/13 4:03:53.692 PM mdworker[1620]: Unable to talk to lsboxd
2/16/13 4:03:53.711 PM sandboxd[1627]: ([1621]) mdworker(1621) deny mach-lookup com.apple.ls.boxd
2/16/13 4:03:53.786 PM sandboxd[1627]: ([1620]) mdworker(1620) deny mach-lookup com.apple.ls.boxd
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 received event(s) VQ_LOWDISK (4)
2/16/13 4:04:05.629 PM KernelEventAgent[45]: tid 00000000 type 'hfs', mounted on '/Volumes/FreeAgent GoFlex Drive', from '/dev/disk1s3', low disk
2/16/13 4:04:21.928 PM com.apple.backupd[1325]: Stopping backup.
2/16/13 4:04:21.954 PM com.apple.backupd[1325]: Error: (-34) SrcErr:NO Copying /Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm/winxp-s003.vmdk to /Volumes/FreeAgent GoFlex Drive/Backups.backupdb/Howard Brazee’s Computer/2013-02-15-184254.inProgress/07592BCC-A3D7-4879-B08D-C01FDDF1895A/Maci ntosh HD/Users/HBrazee/Documents/Virtual Machines.localized/Microsoft Windows XP.vmwarevm
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copied 14628 files (14.03 GB) from volume Macintosh HD.
2/16/13 4:05:16.286 PM com.apple.backupd[1325]: Copy stage failed with error:28>>> Enter Time Machine and manually delete unnecessary backups to make
>>> sufficient room for new ones.
>>
>>
>> I haven't figured out how to do this. Where is this setting?
>
> I have not figured this out either. But there is a command line
> program tmutil (time machine utility) that can delete backups, and
> also do much more. I am not an expert in this area, so I can only
> suggest that you open a Terminal.app and type
> man tmutil
>
> Be careful Howard. If Time Machine is not able to delete old backup
> jobs, something is wrong with your backup disk.
If I recall correctly you do this by going on to TM and using one of the
pull down menus in the top apple menu strip ....
I myself am having problems with TM. I erased the external target disk and
started TM again. However it stops wverytime and refuses to backup ..
Telling me there isn't enough room even though the ext space is much
bigger. It also quotes the size of my HD content about 20% bigger than
finder says weird.
Howard (another one...)
============
1. Enter the time Machine
2. Scroll back it time for a few generations
3. Select the folder(s) to delete
4. Under the "Action" item (or gear icon), select the delete option you
want.
=================
> The last couple of days my Time Machine has run out of space during
> backups (error 28).
Just to be certain, is that really "28" or is it "-28"? (I assume it is
a positive error number, as error -28 is
> In the past, when I've seen this, I just say OK, and the problem goes away
> by itself, as it clears up space.
>
> My FreeAgent GoFlex Drive is 1 TB, while my Mac drive is 500.11 GB.
>
> I tried using Disk Utility to fix permissions, but those buttons were
> greyed out. Disk Utility did not find any problem with the disk.
Repair Permissions is not relevant for Time Machine backups. It only
repairs permissions on files installed by the OS X Installer application
(or the OS installation or preinstalled OS, or Software Update). TM
backups don't qualify.
In any case, Time Machine deletes old backups using root privileges so
it doesn't care about permissions on the backup drive.
> Time Machie preferences show 13.3 GB of 1 TB available.
>
> I haven't been adding stuff to my computer lately more than getting
> mail.
>
> Oldest backup: December 29, 2012
> Latest backup: February 15, 2013
>
> Excluded from backups is the backup drive, my downloads folder, and my
> Mobile Documents folder.
>
> Estimated size of full backup 397.5 GB
Something odd is happening here. Given your described usage, you should
not be chewing through 1 TB of backups in less than three months. I've
gone more than a year on a drive with a similar ratio and not filled it
(and I am backing up my downloads, sometimes two or three times as I
move them to other folders).
Has anything major been done to the computer within that timeframe, e.g.
installing a new hard drive, or erasing the main drive and restoring
from backup? If so, that drive is treated as a new one and would require
another full backup, leaving the old one there.
A similar possibility is if Time Machine thought the computer had been
replaced, which would result in a new backup being started, and would
also leave the old backup unable to be deleted automatically.
In this case, you wouldn't be able to directly access the backups prior
to the change using "Enter Time Machine", but could get to them by
holding down the Option key and choosing "Browse Other Backup Disks"
from the Time Machine menu.
> What suggestions do you have for me to resolve this issue.
Which OS X version are you running?
Have a look in system.log (using Console) to see if Time Machine logged
any relevant information when the backup failed. Look for references to
"backupd" (which is the background software which does Time Machine
backups).
============= -
Preverification failed with error code 1. BUILD FAILED
Hallo Oracle,
Am learning my first J2me application and when i build it am getting this error. can some one help me understand what it means
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Copying 1957 files to C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverifysrc
Created dir: C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified
Preverifying 1957 file(s) into C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\build\preverified directory.
Error preverifying class com.sun.activation.registries.MailcapFile
VERIFIER ERROR com/sun/activation/registries/MailcapFile
.<init>(Ljava/lang/String;)V:
Cannot find class java/util/Map
C:\Users\Dell\Documents\NetBeansProjects\watsdownapp\nbproject\build-impl.xml:431: Preverification failed with error code 1.
BUILD FAILED (total time: 25 seconds)
this is the contents of build-impx.xml
<?xml version="1.0" encoding="UTF-8"?>
<!-- *** GENERATED FROM project.xml - DO NOT EDIT *** -->
<project name="watsdownapp-impl" default="jar" basedir="..">
<!--load-properties-->
<target name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property name="user.properties.file" location="${netbeans.user}/build.properties"/>
<available property="user.properties.file.exists" file="${user.properties.file}"/>
</target>
<target name="exists.config.active" unless="config.active">
<echo level="warning" message="Active configuration (config.active property) is not set - using default."/>
<property value="" name="config.active"/>
</target>
<target name="exists.netbeans.user" unless="netbeans.user">
<echo level="warning" message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically."/>
</target>
<target name="exists.user.properties.file" unless="user.properties.file.exists">
<echo level="warning" message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)."/>
</target>
<target name="load-properties" depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method=|^deployment.instance="/>
</filterchain>
</loadproperties>
<property name="deployment.instance" value="default"/>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex pattern="^platforms\.${platform.active}\." replace="platform."/>
<replaceregex pattern="^deployment\.${deployment.method}\.scriptfile=" replace="deployment.scriptfile="/>
<replaceregex pattern="^deployments\.${deployment.method}\.${deployment.instance}\.([^=]+)=" replace="\1="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex pattern="^configs\.${config.active}\.(.*)" replace="\1"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<!--basic-init-->
<target name="exists.platform.active" unless="platform.active">
<echo level="warning" message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)."/>
</target>
<target name="exists.platform.configuration" unless="platform.configuration">
<echo level="warning" message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration."/>
<property name="platform.configuration" value="CLDC-1.0"/>
</target>
<target name="exists.platform.profile" unless="platform.profile">
<echo level="warning" message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile."/>
<property name="platform.profile" value="MIDP-1.0"/>
</target>
<target name="basic-init" depends="exists.platform.active,exists.platform.configuration,exists.platform.profile">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-mobility-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<property name="javac.source" value="1.3"/>
<property name="javac.target" value="1.1"/>
<property name="javac.encoding" value="${file.encoding}"/>
<property name="deployment.number" value="0.0.1"/>
<property name="deployment.counter" value="000002"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.preprocess">
<isfalse value="${use.preprocessor}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition property="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes},**/*Test.java,**/test,**/test/**">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property name="filter.excludes.evaluated" value="${filter.excludes},${filter.more.excludes}"/>
<condition property="deployment.do.override.jarurl" value="">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<condition property="config.active.name" value="DefaultConfiguration">
<length string="${config.active}" trim="true" length="0"/>
</condition>
<property name="config.active.name" value="${config.active}"/>
<taskdef resource="org/netbeans/mobility/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<condition property="skip.deployment">
<equals arg1="${deployment.method}" arg2="NONE" casesensitive="false" trim="true"/>
</condition>
<condition property="app-version.autoincrement.trigger">
<istrue value="${app-version.autoincrement}"/>
</condition>
<condition property="debug.timeout" value="30000">
<or>
<equals arg1="${debugger.timeout}" arg2="" trim="true"/>
<not>
<isset property="debugger.timeout"/>
</not>
</or>
</condition>
<property name="debug.timeout" value="${debugger.timeout}"/>
<nb-overrideproperty name="buildsystem.baton" value="${src.dir}"/>
</target>
<!--cldc-init-->
<target name="cldc-pre-init">
<condition property="cldc-platform.trigger">
<equals arg1="CLDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
</target>
<target name="cldc-init" depends="cldc-pre-init" if="cldc-platform.trigger">
<property name="preverify.sources.dir" location="${build.dir}/preverifysrc"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<property name="platform.device" value=""/>
<property name="dist.jad.url" value="file://"/>
<property name="run.cmd.options" value=""/>
<condition property="evaluated.run.security.domain" value="">
<isfalse value="${run.use.security.domain}"/>
</condition>
<property name="evaluated.run.security.domain" value="${run.security.domain}"/>
<condition property="override.jarurl.trigger">
<and>
<istrue value="${cldc-platform.trigger}"/>
<istrue value="${deployment.override.jarurl}"/>
</and>
</condition>
<property name="deployment.jad" location="${dist.dir}/${dist.jad}"/>
<property name="deployment.jar" location="${dist.dir}/${dist.jar}"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jad}"/>
<include name="${dist.jar}"/>
</patternset>
</target>
<!--cdc-init-->
<target name="cdc-init">
<condition property="cdc-platform.trigger">
<equals arg1="CDC" arg2="${platform.trigger}" casesensitive="false"/>
</condition>
<available file="${manifest.file}" property="manifest.available"/>
<condition property="main.class.applet">
<equals arg1="${main.class.class}" arg2="applet" casesensitive="false"/>
</condition>
<condition property="main.class.xlet">
<equals arg1="${main.class.class}" arg2="xlet" casesensitive="false"/>
</condition>
<condition property="manifest.available+main.class+fat.jar">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<istrue value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="manifest.available+main.class">
<and>
<isset property="manifest.available"/>
<isset property="main.class"/>
<isfalse value="${platform.fat.jar}"/>
<not>
<equals arg1="${main.class}" arg2="" trim="true"/>
</not>
</and>
</condition>
<condition property="application.version.invalid" value="true">
<equals arg1="${deployment.number}" arg2="" trim="true"/>
</condition>
<fail if="application.version.invalid" message="Property deployment.number must not be empty and must contain version in format %d.%d.%d!"/>
<condition property="sign.jar.trigger" value="true">
<and>
<isset property="cdc-platform.trigger"/>
<istrue value="${sign.enabled}"/>
</and>
</condition>
</target>
<!--semc-init-->
<target name="semc-pre-init" if="cdc-platform.trigger">
<condition property="semc-platform.trigger">
<equals arg1="semc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="semc-init" depends="semc-pre-init" if="semc-platform.trigger">
<condition property="semc.icon.invalid" value="true">
<or>
<contains string="${semc.application.icon}" substring="$${"/>
<equals arg1="${semc.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<condition property="no.certificateorkey" value="true">
<or>
<isset property="no.application.uid"/>
<equals arg1="${semc.certificate.path}" arg2="" trim="true"/>
<contains string="${semc.certificate.path}" substring="$${semc.certificate.path"/>
<equals arg1="${semc.private.key.path}" arg2="" trim="true"/>
<contains string="${semc.private.key.path}" substring="$${semc.private.key.path"/>
</or>
</condition>
<property name="j9.dist" location="${build.dir}/j9/${semc.application.uid}.j9"/>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/defs.properties">
<classpath>
<pathelement path="${libs.cdc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<taskdef resource="org/netbeans/modules/j2me/cdc/project/semc/defs.properties">
<classpath>
<pathelement path="${libs.semc-ant-utils.classpath}"/>
</classpath>
</taskdef>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="*.sis"/>
<include name="*.SIS"/>
</patternset>
</target>
<!--savaje-init-->
<target name="savaje-pre-init" if="cdc-platform.trigger">
<condition property="savaje-platform.trigger">
<equals arg1="savaje" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="savaje-init" depends="savaje-pre-init" if="savaje-platform.trigger">
<property name="savaje.application.uid" value="TBD"/>
<condition property="savaje.bundle.base.invalid" value="true">
<or>
<equals arg1="${savaje.bundle.base}" arg2="" trim="true"/>
<contains string="${savaje.bundle.base}" substring="$${savaje.bundle.base"/>
</or>
</condition>
<condition property="savaje.unsupported.main" value="true">
<or>
<equals arg1="${main.class.applet}" arg2="true"/>
</or>
</condition>
<condition property="savaje.icon.invalid" value="true">
<or>
<isset property="no.application.uid"/>
<contains string="${savaje.application.icon}" substring="$${"/>
<equals arg1="${savaje.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="jnlp.dist" value="${build.dir}/jnlp/bundle.jnlp"/>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="bundle.jnlp"/>
<include name="bundle.policy"/>
<include name="lib/*"/>
</patternset>
</target>
<!--sjmc-init-->
<target name="sjmc-pre-init" if="cdc-platform.trigger">
<condition property="sjmc-platform.trigger">
<equals arg1="sjmc" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="sjmc-init" depends="sjmc-pre-init" if="sjmc-platform.trigger"/>
<!--ojec-init-->
<target name="ojec-pre-init" if="cdc-platform.trigger">
<condition property="ojec-platform.trigger">
<equals arg1="ojec" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="ojec-init" depends="ojec-pre-init" if="ojec-platform.trigger"/>
<!--cdc-hi-init-->
<target name="cdc-hi-pre-init" if="cdc-platform.trigger">
<condition property="cdc-hi-platform.trigger">
<equals arg1="cdc-hi" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="cdc-hi-init" depends="cdc-hi-pre-init" if="cdc-hi-platform.trigger"/>
<!--nokiaS80-init-->
<target name="nokiaS80-pre-init" if="cdc-platform.trigger">
<condition property="nokiaS80-platform.trigger">
<equals arg1="nokiaS80" arg2="${platform.type}" casesensitive="false"/>
</condition>
</target>
<target name="nokiaS80-init" depends="nokiaS80-pre-init" if="nokiaS80-platform.trigger">
<property name="j9.dist" location="${build.dir}/j9/NOKIA.j9"/>
<property name="manifest.build.file" location="${build.dir}/manifest.mf"/>
<condition property="nokia.icon.invalid">
<or>
<contains string="${nokiaS80.application.icon}" substring="$${"/>
<equals arg1="${nokiaS80.application.icon}" arg2="" trim="true"/>
</or>
</condition>
<property name="deployment.dir" location="${dist.dir}"/>
<patternset id="deployment.patternset">
<include name="${dist.jar}"/>
</patternset>
</target>
<!--init-->
<target name="pre-init"/>
<target name="post-init"/>
<target name="init" depends="pre-init,load-properties,basic-init,cldc-init,cdc-init,semc-init,savaje-init,sjmc-init,ojec-init,cdc-hi-init,nokiaS80-init,post-init"/>
<!--conditional clean-->
<target name="conditional-clean-init">
<uptodate property="no.clean.before.build" targetfile="${build.dir}/.timestamp">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
</target>
<target name="conditional-clean" depends="init,conditional-clean-init" unless="no.clean.before.build" description="Clean project in case its meta information has changed.">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<!--deps-jar-->
<target name="deps-jar" depends="conditional-clean" unless="no.deps"/>
<!--preprocess-->
<target name="pre-preprocess"/>
<target name="do-preprocess" unless="no.preprocess">
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<property name="abilities" value=""/>
<property name="debug.level" value="debug"/>
<mkdir dir="${preprocessed.dir}"/>
<echo message="ignore me" file="${build.dir}/.timestamp"/>
<nb-prep destdir="${preprocessed.dir}" preprocessfor="${config.active.name},${abilities},DebugLevel=${debug.level}" encoding="${javac.encoding}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated}"/>
</nb-prep>
<copy todir="${preprocessed.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preprocessed.dir}"/>
</target>
<target name="post-preprocess"/>
<target name="preprocess" depends="deps-jar,pre-preprocess,do-preprocess,post-preprocess" description="Preprocess project sources."/>
<!--compile-->
<target name="pre-compile"/>
<target name="do-compile">
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" destdir="${build.classes.dir}" srcdir="${buildsystem.baton}" bootclasspath="${platform.bootclasspath}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${build.classes.dir}"/>
</target>
<target name="extract-libs" description="Extracts all bundled libraries.">
<mkdir dir="${build.classes.dir}"/>
<nb-extract dir="${build.classes.dir}" excludeManifest="true" classpath="${libs.classpath}" excludeclasspath="${extra.classpath}"/>
</target>
<target name="post-compile"/>
<target name="compile" depends="preprocess,pre-compile,extract-libs,do-compile,post-compile" description="Compile project classes."/>
<!--compile-single-->
<target name="pre-compile-single"/>
<target name="do-compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac includeantruntime="false" source="${javac.source}" target="${javac.target}" deprecation="${javac.deprecation}" optimize="${javac.optimize}" debug="${javac.debug}" srcdir="${buildsystem.baton}" destdir="${build.classes.dir}" bootclasspath="${platform.bootclasspath}" includes="${javac.includes}" encoding="${javac.encoding}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
</target>
<target name="post-compile-single"/>
<target name="compile-single" depends="preprocess,pre-compile-single,do-compile-single,post-compile-single" description="Compile selected project classes."/>
<!--proguard-->
<target name="proguard-init" description="Up-to-date check before obfuscation.">
<property name="obfuscation.level" value="0"/>
<condition property="no.obfusc">
<or>
<equals arg1="${obfuscation.level}" arg2="0"/>
<uptodate targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</or>
</condition>
<uptodate property="obfuscation.up-to-date" targetfile="${obfuscator.destjar}">
<srcfiles dir="${buildsystem.baton}"/>
</uptodate>
</target>
<target name="skip-obfuscation" depends="proguard-init" if="obfuscation.up-to-date">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<target name="proguard" depends="skip-obfuscation" description="Obfuscate project classes." unless="no.obfusc">
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<property name="obfuscator.classpath" value=""/>
<dirname file="${obfuscator.srcjar}" property="obfuscator.srcjar.dir"/>
<dirname file="${obfuscator.destjar}" property="obfuscator.destjar.dir"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar jarfile="${obfuscator.srcjar}" basedir="${buildsystem.baton}"/>
<property name="obfuscation.custom" value=""/>
<nb-obfuscate srcjar="${obfuscator.srcjar}" destjar="${obfuscator.destjar}" obfuscatorclasspath="${obfuscator.classpath}" classpath="${platform.bootclasspath}:${extra.classpath}" obfuscationLevel="${obfuscation.level}" extraScript="${obfuscation.custom}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar src="${obfuscator.destjar}" dest="${obfuscated.classes.dir}"/>
<nb-overrideproperty name="buildsystem.baton" value="${obfuscated.classes.dir}"/>
</target>
<!--obfuscate-->
<target name="pre-obfuscate"/>
<target name="post-obfuscate"/>
<target name="obfuscate" depends="compile,pre-obfuscate,proguard,post-obfuscate" description="Obfuscate project classes."/>
<!--lwuit-build-->
<import file="lwuit.xml" optional="true"/>
<target name="-lwuit-check">
<condition property="lwuit.allowed">
<and>
<available file="nbproject/lwuit.xml"/>
<isset property="is.mesdk_lwuit"/>
</and>
</condition>
</target>
<target name="-pre-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="-lwuit-build" depends="-lwuit-check" if="lwuit.allowed">
<antcall target="lwuit_build"/>
</target>
<target name="-post-lwuit-build" depends="-lwuit-check" if="lwuit.allowed"/>
<target name="lwuit-build" depends="-lwuit-check,-pre-lwuit-build, -lwuit-build, -post-lwuit-build" if="lwuit.allowed"/>
<!--preverify-->
<target name="pre-preverify"/>
<target name="do-preverify" if="cldc-platform.trigger">
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<mkdir dir="${preverify.sources.dir}"/>
<copy todir="${preverify.sources.dir}">
<fileset dir="${buildsystem.baton}" includes="**/*.class"/>
</copy>
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify srcdir="${preverify.sources.dir}" destdir="${preverify.classes.dir}" classpath="${platform.bootclasspath}:${extra.classpath}" configuration="${platform.configuration}" platformhome="${platform.home}" platformtype="${platform.type}" commandline="${platform.preverifycommandline}"/>
<copy todir="${preverify.classes.dir}">
<fileset dir="${buildsystem.baton}" defaultexcludes="${filter.use.standard}" excludes="${filter.excludes.evaluated},${build.classes.excludes}"/>
</copy>
<nb-overrideproperty name="buildsystem.baton" value="${preverify.classes.dir}"/>
</target>
<target name="post-preverify"/>
<target name="preverify" depends="obfuscate,lwuit-build,pre-preverify,do-preverify,post-preverify" description="Preverify project classes."/>
<!--set-password-->
<target name="set-password-init">
<property name="sign.enabled" value="false"/>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.keystore.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals arg1="${sign.keystore}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias}" arg2="" trim="true"/>
</not>
<not>
<equals arg1="${sign.alias.password}" arg2="" trim="true"/>
</not>
</and>
</or>
</condition>
</target>
<target name="set-keystore-password" if="netbeans.home" unless="skip-sign-keystore-password-input">
<nb-enter-password keystore="${sign.keystore}" passwordproperty="sign.keystore.password"/>
</target>
<target name="set-alias-password" if="netbeans.home" unless="skip-sign-alias-password-input">
<nb-enter-password keystore="${sign.keystore}" keyalias="${sign.alias}" passwordproperty="sign.alias.password"/>
</target>
<target name="set-password" depends="set-password-init,set-keystore-password,set-alias-password"/>
<!--create JAD-->
<target name="add-configuration" unless="contains.manifest.configuration">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Configuration: ${platform.configuration}
</nb-output>
</target>
<target name="add-profile" unless="contains.manifest.profile">
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8" append="true">MicroEdition-Profile: ${platform.profile}
</nb-output>
</target>
<target name="create-jad" if="cldc-platform.trigger">
<fail unless="dist.jad">Must set dist.jad</fail>
<mkdir dir="${build.dir}"/>
<dirname file="${dist.dir}/${dist.jad}" property="dist.jad.dir"/>
<mkdir dir="${dist.jad.dir}"/>
<condition property="evaluated.manifest.apipermissions" value="${manifest.apipermissions}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="evaluated.manifest.pushregistry" value="${manifest.pushregistry}">
<not>
<equals arg1="${platform.profile}" arg2="MIDP-1.0"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains substring="MicroEdition-Configuration: " string="${manifest.others}"/>
</condition>
<condition property="contains.manifest.profile">
<contains substring="MicroEdition-Profile: " string="${manifest.others}"/>
</condition>
<property value="" name="evaluated.manifest.apipermissions"/>
<property value="" name="evaluated.manifest.pushregistry"/>
<property name="manifest.jad" value=""/>
<property name="manifest.manifest" value=""/>
<nb-output file="${dist.dir}/${dist.jad}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</nb-output>
<nb-output file="${manifest.build.file}" encoding="UTF-8">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</nb-output>
<antcall target="add-configuration" inheritall="true" inheritrefs="true"/>
<antcall target="add-profile" inheritall="true" inheritrefs="true"/>
<property name="manifest.available" value="true"/>
</target>
<!--do-extra-libs-->
<target name="do-extra-libs" if="extra.classpath">
<property name="dist.lib.dir" value="${dist.dir}/lib"/>
<mkdir dir="${dist.lib.dir}"/>
<copy todir="${dist.lib.dir}">
<path path="${extra.classpath}"/>
<flattenmapper/>
</copy>
</target>
<!--nokiaS80-manifest-->
<target name="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger">
<fail message="Main class is not set!">
<condition>
<equals arg1="${main.class}" arg2="" trim="true"/>
</condition>
</fail>
<mkdir dir="${build.dir}/j9"/>
<taskdef name="j9builder" classname="org.netbeans.modules.j2me.cdc.project.J9Builder" classpath="${libs.cdc-ant-utils.classpath}"/>
<j9builder jvmargs="${run.jvmargs}" mainclass="${main.class}" args="${application.args}" home="${platform.home}" dist="${j9.dist}" id="NOKIA" platform="${platform.type}" xlet="${main.class.xlet}" applet="${main.class.applet}" jarname="${dist.jar}"/>
<copy file="${manifest.file}" tofile="${manifest.build.file}" failonerror="false"/>
<property name="manifest.available" value="true"/>
<loadfile property="nokia.manifest.j9" srcFile="${j9.dist}"/>
</target>
<target name="nokiaS80-prepare-manifest" depends="nokiaS80-prepare-j9" if="nokiaS80-platform.trigger" unless="nokia.icon.invalid">
<pathconvert property="logo.icon.name" pathsep=" ">
<path path="${nokiaS80.application.icon}"/>
<chainedmapper>
<flattenmapper/>
<globmapper from="*" to="*"/>
</chainedmapper>
The error says class file is missing, you can try to clean and build.
-
CFURLCreateDataAndPropertiesFromResource failed with error code -15
I'm trying to lead a TIFF image into a CGImageSource using CGImageSourceCreateWithURL. My URL is correct, is %20 encoded, is a path to an existing file, that file is a TIFF. However, the line:
NSString *fullPath = [[[fileNames objectAtIndex:pageNum - 1] string]
stringByAddingPercentEscapesUsingEncoding:
NSUTF8StringEncoding];
NSString* urlStr = [NSString stringWithFormat: @"file:/%@", fullPath];
NSURL * url = [NSURL URLWithString: fullPath];
CGImageSourceRef src = CGImageSourceCreateWithURL (url, NULL);
gives me the following error:
Wed Aug 4 20:17:20 Brians-mini.local DocKeep[17199] <Error>: CGImageSourceCreateWithURL: CFURLCreateDataAndPropertiesFromResource failed with error code -15.
anyone know what error -15 is? or where I can find it?
thanksHey,
Thanks for the reply. I saw the -customlogdir switch listed for opatch to put the results in another directory. My main concern is this - why would I have permission issues for this command on a fresh install of GI? And why are there no references to this error on MOS?
I have an SR filed with MOS to see why this is happening, but figured I would check with the community to see if anyone else is having similar issues.
Thanks! -
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help
I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?
Sorry to bother you.
I could find the answer after searching previous posts about this language problem.
Had to change my language in AAM profile and then download PS CS6 again ( english version ).
Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
restart application and Voila.
Greetz, Jeroen -
Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name: Application
Source: MSExchangeRepl
Date: 28.09.2012 00:37:17
Event ID: 2112
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name: Application
Source: MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID: 2024
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User:
N/A
Computer: Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
- * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
MarkusHi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus -
Hi All,
Application R12.1.3 with Shared Application Tier 2 nodes
Database : 11g R 11.2.0.2 with RAC 2 nodes with ASM
We have a concurrent program which gets fired when submitted thru API . For each order program is run once . If there are more orders it will run n number of times . At this time one request is failing with error
REP-0004:
REP-0069:
REP-57054:
But for the same failed request when we run separately(with same parameters) it is completing Normal . There is no other error in Manager Logs.
please help what can be the issue.
thanks
MappsPlease see the following docs/links.
Concurrent Processing - Concurrent Reports Failing With Errors REP-0004,REP-0082 and REP-0104 [ID 844976.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-0004+AND+REP-0069+AND+REP-57054&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
If the links did not help, please enable trace/debug and see if you get more details about the error and post the contents of the log file then -- How Can Trace and Debug Be Turned On For A Concurrent Request? [ID 759389.1]
Thanks,
Hussein -
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
Error when deploying EAR file: Operation failed with error: java:/app/jdbc/
I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.How did you create your datasource, can you post the content, without passwords of course.
Greetings. -
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellmeWell here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 1/14/2009
Time: 10:41:31 AM
User: N/A
Computer: <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!
Maybe you are looking for
-
Default values in purchase order when using ME21
Need to add field default settings for SAP transaction code ME21 (create PO). The fields we want to add defaults to are: valuation type (EKPO-BWTAR) to default a text "ATT" and storage location (EKPO-LGORT) to default a value "03" when the user is cr
-
Hello all, Using Oracle 10g R2 ( 10.2.4.0) under UNIX Sun Solaris 10 , I have two rman backup types 1-L0 backup 2-L1 Backup ( Incremental cummulative) Facts: -Due to space pressure on archived log destination I'm trying to get less archived files pos
-
Can anyone give me some idea regarding Workflow task and what is the use of this. Thanks
-
SAP Certification eligibility in India
Hi Friends... I am working with Tata Chemicals in its IT dept as SAP SD support consultant since 2 years. I am preparing for my SAP SD Certification through one of the good courses available online. Today someone told me that I got to be employed wit
-
i have reset my iphone attempting to download new software - but now it will not link up to my computer, i have reset my iphone attempting to download new software - but now it will not link up to my computer