Encoding fails with QT DV PAL files

hi all,
for some reason, in DVDSP4 I cannot get this QT DV PAL file to convert. the file is coming from FCEHD.
I am converting on 2 pass vbr and the bit rate is 5.0 with max at 7.0.
have tried both the settings encode on build and background encoding with no success. ( the error I get is error -2 and error - 12345, which no one seems to answer questions about)
and the problem is the video file. the audio file encoded fine.
I tried to encode a test video of 22 seconds using the same settings, from the same original FCEHD project,from the same locaction, into the same project and had no problems. but when I try to do the real thing ( a movie file that is 1 hour 16 minutes long) it fails to encode.
I've re-converted the file from FCEHD three times, and attempted to encode three times as well ( do the math for how long I've been sittting in front of the computer trying to do this)
anyone got any ideas?
BBP

Yo Houghts,
thanks for the thoughts...yes I exported the files 3 different times from FCEHD as DV PAL files. none of them worked. also tried from the internal hard drive and an external drive.
compressor bit me in the *ss last time I tried to use it. went to my favorite mac store and we came to the conculsion that this was a panther/tiger issue with compressor. I promptly uninstalled it.
at that time, I burned a dvd using the same process I am doing now, and the file was of the same size. so I don't know what's up this time.
I thought I'd hear some other opinoins.
ta
BBP

Similar Messages

Time Machine fails with "error while linking files on the backup volume"

One of my drives was nearly full. I moved some folders from that drive to one that had more space.
The next TM backup failed with "error while linking files on the backup volume". A full backup is about 620 GB, although this backup shouldn't have been a complete one. There was 570+ GB free on the drive.
A Disk Verify reported "Drive appears to be okay." Earlier TM backups appeared to be fine (at least accessible). I swapped the TM drive for another, initialized it, and TM used that drive with no complaints.
What does the message mean?
Thanks,
harv47

Pondini wrote:
harv47 wrote:
The Time Machine Buddy widget shows no messages. None of the buttons do anything.
What am I doing wrong?
See #A1 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.
Your user account may not have permission to see the logs.
The sentence beginning "If the message area is blank ..." shows how to figure out if that's the problem, and how to fix it.
Post back if it's not clear, or doesn't work.
The Tip had the answer. It was permissions.
What follow are the messages for the last unsuccessful TM backup (on v.3), followed by
the successful TM backup on the replacement drive (v.1). The line
"Copied 11 files (0 bytes) from volume Bay 3 HPFS+." was odd.
Starting standard backup
Backing up to: /Volumes/Time Machine v.3/Backups.backupdb
Event store UUIDs don't match for volume: Bay 3 HPFS+
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/Volumes/Bay 3 HPFS+ reason:kFSEDBEventFlagMustScanSubDirs|
Node requires deep traversal:/ reason:kFSEDBEventFlagMustSc
(Finished May 4, 2010 9:31:21 AM-- Status unknown)
Starting standard backup
Backing up to: /Volumes/TimeMachine v.1/Backups.backupdb
Event store UUIDs don't match for volume: Bay 3 HPFS+
Event store UUIDs don't match for volume: Bay 2 HPFS+
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 169.1 GB excluded items size: 0 bytes for volume Bay 3 HPFS+
Backup content size: 305.5 GB excluded items size: 0 bytes for volume Bay 2 HPFS+
Backup content size: 145.7 GB excluded items size: 7.5 MB for volume Macintosh HD
No pre-backup thinning needed: 744.36 GB requested (including padding), 931.15 GB available
Waiting for index to be ready (909 > 0)
Copied 1951 files (169.0 GB) from volume Bay 3 HPFS+.
Copied 4999 files (474.3 GB) from volume Bay 2 HPFS+.
Copied 410304 files (612.4 GB) from volume Macintosh HD.
No pre-backup thinning needed: 712.2 MB requested (including padding), 315.09 GB available
Copied 11 files (0 bytes) from volume Bay 3 HPFS+.
Copied 20 files (1.1 GB) from volume Bay 2 HPFS+.
Copied 1103 files (1.1 GB) from volume Macintosh HD.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
(Finished May 4, 2010 2:38:17 PM)
I hope this is useful. Thanks for your help.
harv47

Encoding failed with error -43

I push "burn" and the error message: "Encoding of (file name.mov) failed with error -43" pops up immediately upon beginning the encode phase.
This just started today...can't figure out what is different from yesterday...I am importing 16x9 anamorphic Quicktime files (audio and video, directly exported from Final Cut Pro and re-formatted for aspect ratio through QTPro. No menu, no jumps, nothing but video/audio with "first Start" in the track (set for 16x9 letterbox display mode)...
any suggestions? I am dead in the water...

Welcome to the boards
Try sending the movie to Compressor and encode in there (as m2v and ac3 file) then bring those in

Media Encoder failing with AVCHD

There's been a few discussions about AVCHD but I haven't been able to find any that were resolved. In using AVCHD footage from my Canon C100 I've found that media encoder fails if CUDA hardware acceleration is enabled for the project. Having acceleration disabled slows down my system a lot so I wondered if anybody found a solution?
I'm using 6.2 on the Mac with a Quadro 4000 GPU.

Hi Ann
Good point, I assumed it was the AVCHD footage as I've not had a problem exporting with MPE turned on until using this footage but I just tested some Canon MXF footage from the C300 and AME failed with that too.

Installation 11.5.10.2 failed with creation of control file.

The log information will be written to
"f:\oracle\alivisdb\9.2.0\appsutil\log\ALIVIS_dba\adcrdb_ALIVIS.txt"
ECHO is off.
ECHO is off.
Creating the control file for ALIVIS database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:14:25 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:08 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Mon Sep 10 14:15:19 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01041: internal error. hostdef extension doesn't exist
adcrdb.cmd exiting with status 1
"Error returned while creating control files"
Dear All,
Tried installing 11.5.10.2 in winxp .. all the pre-requisties met and at the second stage ,Rapidwizard got stucked with the following error :
There was an error while running the command - f:\oracle\alivisdb\9.2.0\temp\ALIVIS_dba\adrundb.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for ALIVIS instance
I've been assigned the user who has administrative privileges on the domain..
Help out guys..
Thanks
Yusuf

Please see Oracle Metalink Document Oracle Applications 11i Install Fails on Windows when Number of Processors is Greater than 12 Doc ID: Note:433203.1.
Some extracts of the metalink document,
To overcome this problem encountered on Windows, please execute the following steps:
1. Right click on "My Computer" > "Advanced" tab > Click on button "Environment variables".
2. Edit the value of NUMBER_OF_PROCESSORS from the value which is greater than 12(e.g. in this case 16) to 12. Apply the changes.
3. Reboot the machine to ensure that the environment variable NUMBER_OF_PROCESSORS is set to the corrected value i.e.12.
4. Clean the current install.
5. Check the value of NUMBER_OF_PROCESSORS on the command prompt before the rapidwiz is started :
echo %NUMBER_OF_PROCESSORS%
6. Run rapidwiz and finish database(of the Oracle Applications) installation.
7. Once the Oracle Applications is installed, the value of environment variable NUMBER_OF_PROCESSORS could be reset to its original value.
Hope it helps.
Adith

MAXDB backup failed with error: end of file reached -917

Hi I am performing a complete data backup for a database which is about 230 GB.
Previously it had run successfully for many days, but since yesterday, I began to receive such error:
Error: end of file reached(-917)
The backup stopped itself after running for 1 hour, and from backup history I just saw above error message.
I also had a look at the logs, and found below, could someone help me look into this issue?
Appreciate your kind help in advance!
2008-11-25 22:08:09      0xBE4 ERR 52012 SAVE     error occured, basis_err 5750
2008-11-25 22:08:09      0xBE4 ERR     3 Backup   Data backup failed
2008-11-25 22:08:09      0xBE4 ERR     1 Backup    +   Backupmedium #1 (F:\Dbbackup\QAS_data_01) end of file reached
2008-11-25 22:08:09      0xBE4 ERR     6 KernelCo +   Backup error occured, Error code 5750 "write_task_crash"
2008-11-25 04:00:27     0x16A0     52024 SAVE     30462712 pages -> "F:\DBbackup\QAS_DATA"
2008-11-25 04:00:28     0x1BE4     19626 IO       Async I/O thread stopped, 'F:\DBbackup\QAS_DATA'
2008-11-25 04:00:28     0x1FC4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0001'
2008-11-25 04:00:28     0x1688     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0002'
2008-11-25 04:00:28     0x15D4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0003'
2008-11-25 04:00:28      0xAEC     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0004'
2008-11-25 04:00:28     0x179C     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0005'
2008-11-25 04:00:28      0xDD4     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0006'
2008-11-25 04:00:28     0x1AE8     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0007'
2008-11-25 04:00:28     0x176C     19626 IO       Async I/O thread stopped, 'E:\sapdb\QAS\DAT_0008'
2008-11-25 04:00:28     0x11B8     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0009'
2008-11-25 04:00:28     0x1B4C     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0010'
2008-11-25 04:00:28     0x1F60     19626 IO       Async I/O thread stopped, 'G:\sapdb\QAS\DAT_0011'
2008-11-25 04:00:35      0xB8C     52012 SAVE     ready
2008-11-25 04:00:35      0xB8C     19651 CONNECT Connection released, T113
Thanks,
vivian

Hello Shaun,
Thank you so much for your reply. But I've checked that my F drive still have more than 480GB free space, so the space should not be the problem.
And I've just run the backup once again, this time it keeps running for 2 hours, and then failed again with the same error.
Is there other possible reasons of this error?
Thanks a lot,
Vivian

Media Encoder fails with Time Remapping

There is a single 1 Minute Clip in the PR CC 2014 timeline, with some time remapping effects. Exporting with Media Encoder CC 2014 SLOWS DOWN speed of the clip after approx. 30 sec unintentionally and therefore gets out of sync with sound, and ends at a complete different frame than in the timeline.
However, exporting directly from PR CC 2014 gives correct result.
Anyway, this looks like a major "feature" of ME!?!
(MacBook Pro 2013, 15", 2,6 GHz i7, OS X 10.9.4)

source is an uncompressed HD 1080 QT .mov file rendered from AE.
sequence settings are 1920x1080, 25fps, square, progressive
export settings are QT, H.264, 1920x1080, 25fps, progr, square, 20000kbps

Encoding failed with "Error Compiling Movie, Unknown Error"

Hi,
I have come across this error while encoding an NTSC STD sequence to H.264 format, NTSC STD preset. The sequence has few simple effects and titles and its lenght is approx 2min. When same sequence is encoded to FLV, the encode passes. Also, when i encode using inline AME through Export Now, the encode passes. The failure is seen when i encode this sequence using Dynamic Link.
System Configuration :
4 GB RAM, Intel I 3 processor, 64bit Win 7, nVidia CUDA card with 512 MB memory.
If any other information is required, please let me know.
Thanks,
Prateek

I forgot to mention in my original post I was able to export a microsoft avi file of the movie before I added the after effects sequences it appears the AE portions are causing the encoding errors.
Eric

Encoding Fails with Media Encoder

Running Premiere Pro CS6 on a 2009 27" iMac with 3.06 Intel Core 2 Duo and 16 GB Ram running OS 10.6.8. Source video is from a Canon HF100 Camera recording live shows, usually 2 acts. No problem with editing in Premiere but when using Adobe Media Encoder the video seems to process nicely but what it come to the first act break it hangs after the fade out for a minute then FAILS! Encoding log is not very useful with the following message (ooo wait for it) "Export Error Error Compiling Movie Unknown Error. This now has happened with three videos. Getting very concerned and frustrated with this situation. Any ideas out there?

Running Premiere Pro CS6 on a 2009 27" iMac with 3.06 Intel Core 2 Duo and 16 GB Ram running OS 10.6.8. Source video is from a Canon HF100 Camera recording live shows, usually 2 acts. No problem with editing in Premiere but when using Adobe Media Encoder the video seems to process nicely but what it come to the first act break it hangs after the fade out for a minute then FAILS! Encoding log is not very useful with the following message (ooo wait for it) "Export Error Error Compiling Movie Unknown Error. This now has happened with three videos. Getting very concerned and frustrated with this situation. Any ideas out there?

Multilingual App Toolkit fails with TFS ready only files

I have added Multilingual App Toolkit to a ASP.NET web form application, in this application is used TFS for version control.
My problem is that every time the application is build Multilingual App Toolkit need to update the files, but it does not check out files before compile and so generates an error:
"Update xliff build failed, one or more errors occurred, multilingual app toolkit build completed with errors"
If I check out the files he can build normally.
What can I do about it?

Hi Elton,
I'd like to know the reason that Multilingual App Toolkit need to update the files during build process, and how do you check out the files.
If you have to update files, you can update the files and check in then do the building. Please confirm whether you can build successfully on your local machine. You have to build succeed with MSBuild on your local machine before you can build with TFS build
since TFS build use MSBuild as its default compiler. Also build on your build server directly to see if there any errors.
If the issue still exist after taking above methods, please elaborate more details about your scenario, including TFS version and reproduce steps etc.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Erazer X700 new BIOS update flash is failing with 4 - Error: Rom file ROMID is not compatible

I am trying to apply the new Erazer X700 bios update from http://support.lenovo.com/us/en/products/desktops-and-all-in-ones/lenovo-erazer-x-series-desktops/le...
It fails when I run it in the admin cmd window, with message 4 - Error: ROM file ROMID is not compatible with existing BIOS ROMID. Any idea why I'm getting this failure?
Has anyone successfully applied the lastest X700 downloads?

I am also having this same exact issue. Any help would be greatly appreciated Lenovo.

Encoding fails with RGB Curves after update.

I'm trying to finish a project, but Premiere is gving me troubles..
I'm uisng Creative Cloud and I saw that there was a update for Premiere and i thought: "Why not, it can't hurt..", but boy was I wrong!
Before the update I could play and export my sequence without any problems (except laggy Playback), but after the update Premier wouldn't play the sequences (only audio) and when I tried to render previews I got an generic error.
After some investigation I found that there could be a problem with RGB Curves, and sure enough, after disabling the RGB Curve-effects on the Clips it worked fine!
I also found that it should work fine with GPU acceleration enabled, so I activated it. Now my project played fine in PP (with RGB Curves), and thanks to the GPU it didn't laily
Happily I started the export and went for a walk, but when I got back the exports had stopped and there was an generic error!
So, apparentely the exporter(/media encoder) doesn't use the GPU (*sadface*) and so is affected by this weird bug.
What should I do now??
I use RGB Curve for color correction and grading through the whole sequence, so I guess I need to find another effect that gives me the same result..
Windows 8 64bit

I generally try to be careful with updates, and I should have known better (especially than update in the middle of a project). But given it was a minor update and that minor updates is supposed to fix bugs (and not introduce new features/bugs..) I thought it would be safe.. But it's a weird bug (that couldn't have been fixed by replacing the RGB Curve effect file with an older version!?) and even weirder is that the text I read was for CS5.5..
Luckily I had also installed PP on my laptop, so I just copied the program files from the laptop to my workstation and I could carry on and finnish the project.
The thing about waiting with updates of this kind is that you don't get the bug fixes. It's one thing to wait before you jump on the next big update (like CS5.5 to CS6 etc) and another to install "bug fix updates".
There is no real "infancy period" for minor updates, they do not mature, there is one update, if that update introduces a bug, then that's fixed by the next update etc etc.
In the end, you don't gain that much by waiting to do minor updates (albeit you should avoid it during a project), since minor updates should fix the bugs that your software currently has and you could, theoritically, just end up with more problems when you do decide to do that update.
One solution could be to never update, but then you're stuck with the original bugs..
The best thing to do is to do a backup before updating (and I should've done that..).
What would've happened if I decided to install Premiere Pro a week later?? Then I probably would've gotten the latest version with the update and so the bug!?

Audition 3.0 installer under Win7 64-bit fails with "problem while extracting files"

I'm having trouble installing Audition 3.0 on Windows 7 64-bit.
I downloaded an installer for Audition 3.0 (called ADBEAudition_WWEFGJIS.exe, 352 MB).
This installer runs but when the progress bar is at the far end, it raises a dialog saying "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
At this time, the main installer dialog shows 100% completed and displays the filename "...\Audition 3.0\Adobe Bridge CS3\redist\WindowsXP-KB898715-x64-enu.exe". I don't know whether this filename is related to the problem, it might just be the last file extracted.
I'm running Windows 7 64-bit on an Asus laptop with 4GB of RAM and an AMD Turion II P520 processor. I don't know whether this CPU is "SSE2-enabled" or not, as specified in the minimum system requirements.
I've rebooted the machine and the problem occurs consistently.
Thanks in advance for any suggestions.
KrisBlueNZ

Hey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

Workflow Manager - Add-WFHost fails with "Could not load file" error

Hello! I'm not sure that its Sharepoint related topic but..
I'm trying to install Workflow Manager using Powershell. I'm successfully created ServiceBus farm, create namespace, Add-SBhost etc. Also, i created WF Farm using New-WFFarm.
Now i'm got SB Configuration and try to add my first host to WF Farm using standard cmdlets:
$SBClientConfiguration = Get-SBClientConfiguration -Namespaces 'WorkflowDefaultNamespace'
(it successfuly gives me some endpoint definitions)
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration -CertificateAutoGenerationKey $CertificateAutoGenerationKey
where
$WFFarmDBConStr is typical connection string, i also used this to Get-WFFarm with no errors.
$ServiceAccountPassword and $CertificateAutoGenerationKey are secure strings.
But trouble appears with SBClientConfiguration, cmdlet returns error:
"Cannot validate argument on parameter 'SBClientConiguration'. Could not load file or assebly 'Microsoft.ServiceBus, Version=1.8.0.0, Culture=neutral, PublicKeyToken=<SomeTokenSymbolsHere> or one of its dependencies. The system cannot
find the file specified."
What file it tries to load? I've installed all WorkflowManager binaries with
webpicmd /Install /Product:WorkflowManagerRefresh key and don't know, what can be cause.

Hi lehus,
According to your description, my understanding is that you got an error when you configured Workflow Manager using PowerShell.
Please try to use the following PowerShell command, compare the result:
Add-WFHost -WFFarmDBConnectionString $WFFarmDBConStr -RunAsPassword $ServiceAccountPassword -EnableFirewallRules $true -SBClientConfiguration $SBClientConfiguration
–EnableHttpPort -CertificateAutoGenerationKey $CertificateAutoGenerationKey
-Verbose
Check your process as:
http://lennytech.wordpress.com/2013/06/02/configuring-workflow-manager-1-0-using-powershell/
In addition, whether you could install and configure Workflow Manager with Workflow Manager Configuration Wizard. Please have a try as:
http://prabathf.blogspot.com/2013/02/installing-and-configuring-workflow-for.html
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Illustrator fails with Mavericks OS - catastrophic file corruption starting with corrupt type

Since installing Mavericks OS, my Illustrator files have corrupt type ("Cannot Edit the Type" — and repeated efforts crash entire app) and now one mission-critical file crashed and can no longer be opened(!!!) Lost a week's worth of work since all of my "saves" this week were encapsulated in this now corrupt file. Error message says "cannot open file" if opened from outside the app. Crashes Illustrator if opened from inside the app. Can Adobe staff do anything to help me recover this file? Unbelievably bad experience for the last three weeks since upgrading to Mavericks. Countless show-stoppers.
My only hope, besides a magical Adobe intervention, is DropBox's packrat versioning feature. Yet I have no assurance that this won't happen again, or faith in the stablity of Illustrator.

Ping statistics for 216.58.210.14:
Packets: Sent = 3083, Received = 3034, Lost = 49 (1% loss),
Approximate round trip times in milli-seconds:
Minimum = 8ms, Maximum = 1031ms, Average = 18ms
This is from a ping which was left during the 15 mins it took me to write the above message.

Encoding fails with QT DV PAL files

Similar Messages

Maybe you are looking for