Encoding from mov to flv  - issues with red frames

Any ideas how to fix this issue?  Everytime I try to encode this .mov file in the begining of the encode there seems to be some issue where a number of frams turn all red and gets pixelated then it runs smoothly?

This issues seems to be with Adobe Media Encoder software which comes along Creative Suites.
Please post in Creative Suite or AME forums.

Similar Messages

  • GPIB-ENET/100 Issues with Red Hat Enterprise Linix 3.0

    Does anyone know of issues with Red Hat Enterprise Linux 3.0?
    Using Red Hat Linux 8.0, I am able to run EthernetConfig and identify all the GPIB-ENET/100 devices on my Ethernet.
    Running EthernetConfig under Enterprise Linux does not work properly. No devices are detected.
    Everything else appears to be working.
    I can ping the device.
    I can also detect the device using my Windows based program NI-488.2M for Windows NT/GPIB-ENET100 Utilities/Device Configuration.

    I do not know of any issues with RHEL 3.0 and the Beta 488.2 driver. I believe that you have started a support request via e-mail so I will deal with your issue there.
    Thanks,
    Scott B.
    Applications Engineer
    National Instruments

  • I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

    I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
    Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
    Could any one help me out of this?
    Thanks,
    Rajesh

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • 8310 Running 4.2.2 having Calendar Accept Issue with Red X - Intermitten

    Have an executive with a Blackberry 8310 on a BES who has an issue were from time to time when he tries to accept a calendar invitation on his blackberry it gives him a Red X and he can not accept.  We have worked this issue with RIM and have not come up with a solution as of yet.  Running exchange 2003 SP2 and Outlook 2003 SP2  he has an assistant who gets copies of his invitations but this behavior happens during the day and at night both . 
    Does not happen to every invitation.  We can temporarily solve it usually when we reboot the MS exchange serve he is on .   We have run ISINTEG check on his maildatabase no errors.
    Any Thoughts Ideas ?
    Thanks,
    David

    Have an executive with a Blackberry 8310 on a BES who has an issue were from time to time when he tries to accept a calendar invitation on his blackberry it gives him a Red X and he can not accept.  We have worked this issue with RIM and have not come up with a solution as of yet.  Running exchange 2003 SP2 and Outlook 2003 SP2  he has an assistant who gets copies of his invitations but this behavior happens during the day and at night both . 
    Does not happen to every invitation.  We can temporarily solve it usually when we reboot the MS exchange serve he is on .   We have run ISINTEG check on his maildatabase no errors.
    Any Thoughts Ideas ?
    Thanks,
    David

  • Export of the book from Lightroom to blurb, issue with Backgrounds ' opacitty = overexposed

    Hello, 
    I have Mac book Pro last generation.
    While preparing the book with Lightroom, I used new proposed tool that I found very useful , to place photos as background with different type of opacity. After upload to Blurb some of these backgrounds have disappeared at all and some have very bright color (overexposed) , so I am afraid to launch the print . After export into Pdf, everything works correctly.
    Please find enclosed  two obvious examples, two print screens of pfd file and 2 prinscreent from the ecvivalent of  the book Hylem & Mourad wedding at elyseephoto blurb page page 28, 42, 43(i add print screen also).
    Please help me to solve the issue, maybe there are some installation to correct for the graphic backgrounds? Are there minimum opacity level?
    Thank you in advance for your quick answer.
    Kind regards,
    Anna Akoun

    In the top right hand corner of the Book Module under <Book > change from <PDF> to Blurb.
    With Blurb selected you will get lo-res warnings when the resolution is too low. Later on you can change back to <PDF>.
    See screen shot:
    You would not get a lo-res warning if you used original images from your camera. But if you either use small JPGs, or you crop an image severely and then use it for a full page image, the image will be too small to be used.

  • Cs6 issue with still frame duration setting not working, possibly yosemite problem

    Hi, I moved my project over to my iMac, which I updated to Yosemite awhile back. Suddenly the frame duration for stills setting defaults to 5 even though it is set at 2 for my animation project. What gives?
    I just bought my master collection two years ago and spent a pretty penny. There were updates for the Mavericks update but none for Yosemite? I think there need to be and people spend too much money on these products for the support option to be so skimpy.
    Hopefully someone answers this issue with a solution. Otherwise, I will not speak highly of Adobe.

    As suggested by someone on a different forum, I tried downgrading the firmware to 7.6.1. By doing so, the problems disappeared and WPA2 only mode works correctly. I will file a bug report with Apple.

  • Audio off when converting from mov to flv

    I have an mov file that I am trying to convert with the media encoder, but when I run it through, it throws off the audio just slightly. I have tried converting to flv and mp4 with the same results. What is causing this? Can I fix it? I need to be able to convert the file so I can use it in a Captivate project.

    I resolved the issue.  I googled the issue and the answer was right there. Turns out that one audio clip (out of dozens in the project) was somehow corrupted. A small yellow triangle was the indication.  Once I deleted that clip all of the other audio came back into the project.  I simply pasted a fresh version of that audio clip into the project and the all was not lost.

  • My ipod touch will download songs from itunes, but has issues with songs from my CD's.The songs show up on my ipod

    My ipod downloads songs from itunes and plays them just fine. However, when I added my songs from my CD's to it, they downloaded but don't play like they should. They either don't play at all or randomly play in the middle of the song. It has nothing to do with the start time either because they all say that they start at 0.00. I synced the CD's correctlly, so that is not the issue. The songs from the CD's never start playing when I choose them. What can I do to fix this issue?

    Have you looked at the discussions on the right side of this page under the heading "More Like This" with your same problem?

  • Permission issue  with red hat 5. security patch

    Hi Experts,
    We have a 4 node oracle 11.1 RAC in red hat 5.1 linux.
    the sys admin install red hat 5 version 1.1.2 june 2009 security benchmark in RAC.
    But the one node does not restart after implement security benchmark and patch task was stopped.
    OS person finial start up this node.
    However I got one message as
    [oracle@sale1 a bin]$ ./crs_stat -t -v
    -bash: ./crs_stat: Permission denied
    From other node, i saw all components are offline.
    what kind of issue is for this point? how to debug and fix it?
    Thanks for help!
    Regard
    Jim

    Thanks for your help.
    Log into root user and I got massage as -bash: ./crs_stat: No such file or directory.
    I checked system that all file is belong root and remove all oracle/orainstall owner from system.
    OS will work on it.
    I will let you know it later.
    Jim

  • Problem about .xml file from PPro CS5 to FCP with RED and P2 file.

    I have create a Project in Premiere Pro CS5.
    I import the RED file R3D or P2  file XMF and editing my media.
    From menù File i select Export to "Final Cut Pro XML.."
    I open FCP and Import file XML but the media are not reconnect.
    "Warrnig: Non-critical error were found while processing an XML document.
    Would you like to see a log of these error now?"
    I want see the log file and...
    "<file>: Unable to attach specified media file to new clip."
    Where is the problem?

    Hi Dennis I re-format my MACPRO 8 Core and I installed Final Cut Studio Suite and CS5 Premium (no CS4)
    I install Blackmagick driver Decklink 7.6.3
    If I open the After Effects  and setting preview card blackmagic, I see the preview in external monitor.
    If I open the Premiere Pro and setting preview, I don't see the blackmagic card but the second monitor, DV....etc.
    In Premiere I see the blackmagic preset, but no the preview card.
    I have a second question.
    About Red file I want editing in Premiere Pro and i whant color correct in Apple Color from FCP.
    My problem is: my color program crash when I send file form FCP to Color (random mode)
    The sequence is:
    I import file red in PPro5 -- editing file --- export file xml.
    Close the PPro5.
    Open FCP import xml (no re-link media)
    Save de project in FCP
    Select sequence and send to Color.
    In this moment the Apple Color crash.
    I shutdown the MAC.
    I power-up the MAC
    Open FCP select the project and send the sequence to Color.
    Color see the project but no media.
    I re link the media and I editing in color my media.
    Why Apple Color program crash?
    Sorry for my English
    Many Thanks
    Distinti saluti
    Gianluca Cordioli
    Alchemy Studio'S di Gianluca Cordioli
    Via Pacinotti 24/B
    37135 VERONA
    cell.:+39 3385880683
    [email protected]
    www.alchemystudios.it

  • XML import proxy issue with RED footage

    Hey folks,
    So my editor cut a scene on her computer, and I want to edit it on mine. We shot RED (Scarlett), and she was using proxy files. When I imported and opened her fcxXML, I was able to relink the audio files, but the proxy footage just looks black (see photo).
    I have no idea how to re-link it when the program doesn't seem to know how to deal with it. I have installed the RED plugin already, and went ahead and imported all the RED files and am making their proxys now.
    Thanks so much!
    -Kirby

    Do you have the same files as the other editor, original media as well as proxy files? What happens if you switch to original/optimized? Still offline?  What happens if you relink the original media?

  • New issue with blank frame at end of coverted .avi

    Here is the project (scenario details):
    I have 2 .swf files. Both are 30 fps. Call them "chapter1" and "chapter2". Frame count is 3600 and 9600 respectfully. The last frame of "chapter1" contains the same image as the first frame of "chapter2" - basically I'm splitting up an overall animation so I can easier manage two Flash documents versus one large document. I used SoThink SWF Converter to create 2 .avi files. When I place these .avi files back to back on the same timeline in Encore, both .avi files have an extra blank frame at the end. This causes a black frame flicker between the end of "chapter1" and the beginning of "chapter2". Even if I drag the end of the .avi on the timeline to the left (as to trim the video track), I still see a black, empty frame at the end. I don't think the problem is with SoThink because I've even imported these .avi files into Sony Vegas and zoomed in all the way to the end of each video track and the very last frame of both files is as it should be. This leads me to believe the issue is with Encore somewhere. Also, initially the problem in Encore was the audio tracks were extending a few frames beyond the video track thus causing the back to back .avi files to align according to the audio track (which was leaving a few blank frames from the video track). I have included some screen shots of the last 3 frames of "chapter1" and the first frame of "chapter2". Hopefully the images below appear in progression as I attached them. Watch the timeline indicator. One frame before the end of "chapter1" is black. I've run out of troubleshooting ideas. I can't imagine this would have anything to do with the .swf being 30 fps and the Encore timeline being DV NTSC 29.97 fps.

    Stan - thanks for the reply...
    I don't recall what was covered when you posted the similar question earlier:
    Not much more than me explaining the flicker between 2 .avi files, and the only response was someone telling me to just have one .swf file. I'm not sure why some people's response is to "just do it a different way" instead of trying to figure out what is causing the issue.
    What does mediainfo or gspot show about the avis?
    I'm not sure which information you need, but I will attach what I was able to get out of the problematic .avi. Let me know if you need different information. This was the first time I used MediaInfo.
    Without knowing what to look for, I did notice a couple of lines that caught my eye. Line 25 mentions 30 fps frame rate (which I imagine is this .avi). Line 26 mentions 25 fps as the original fps (which makes me wonder if SoThink misread the .swf file as 25 fps instead of 30 fps) - not sure if I'm reading this right. Also, lines 45 & 52 mention a 26ms delay in audio (relative to video). Could that be why the audio track in Encore extends a couple of frames beyond the video track? Either way, Vegas is STILL showing the last frame as filled with the image. What does this report tell you? Maybe I should find a different way to export .swf to video. Is there anything else out there I might try (to see if the problem is SoThink)? Just looked at the .avi in PremierePro. The last frame looks fine. SoThink won't let me convert .avi to 29.97 fps.
    Could the fact I have a 30 fps .avi placed into a 29.97 fps project timeline, could this be the issue? I tested another .avi (from a movie), and the last frame appears correctly in Encore. Now this looks as if the issue is back to SoThink's conversion to 30 fps. I really should find a different .swf to video converter and retest. Again, thanks for any help (from anyone) in this and suggesting alternative video converters.
    *added - the .swf files contain tweened and frame by frame animation along with a streamed audio layer, but even when I completely remove the audio layer, the resulting .avi still shows up as a blank frame at the end. I thought at one point the fact I had a streaming layer of audio might have been forcing the frames in Flash to skip around, but this wasn't the case.

  • Issues with dropping frames

    Hi,
    I have a 3.4 GHz Intel Core i7 iMac with a 2GB AMD Radeon HD 6970M graphics card and 20GB of DDR3 RAM.
    FCPX has been working fine up until now, but suddenly has started dropping frames.
    FCPX 10.0.5 btw
    For extra info my iMac crashed last night because I was rendering out of After Effects and completely ran out of memory. I now have 40% free space and have reset the parameter random access memory (PRAM) and nonvolatile RAM (NVRAM). Still the problem persists.
    Footage is not proxy and is being pulled from my Mac hard drive.
    Any ideas?

    This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
    Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.4.
    First, check that you have at least 20% free space on your system drive - otherwise it will run slowly.
    If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
    Check the spec of your Mac against the system requirements:
    http://www.apple.com/finalcutpro/specs/
    Check the spec of your graphics card. If it's listed here, it's not suitable:
    http://support.apple.com/kb/HT4664
    If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
    Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
    If you ever experience dropped frames, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
    If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
    Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
    Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
    http://assistedediting.intelligentassistance.com/EventManagerX/
    Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
    The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
    Andy

  • HELP!  Need txt ouput, but issues with repeating frames...

    In my data model, I have one main query, and three data linked queries. It IS a complex report, but I need to make it so that the user can output it to a delimited text file. I know how to do this, but when the report is printed, the rows are all mangled. If I PDF it, it's nice and pretty... one row per record. In my paper layout I have one parent repeating frame, which holds all columns, including 3 columns from the three data linked queries. Please help. Although I've written here before, I've never received a response, so I'm hoping this time will be different. Thanks.

    I've read this document and that didn't solve my issue. I'm sure it has to be something others have done in building reports. A little more detail perhaps to help you help me:
    Queries: 4
    Main to get list of all students
    3 other for attendance details (excused, unexcused and lates)
    Paper Layout View:
    1st layer: Frame
    2nd layer: Repeating frame that holds all student info +
    3rd layer: 3 more repeating frames for the 3 data linked queries that tells me if a student has missed any days.
    PDF works great as an output, but it's needed an a delimited export or spreadsheet, both of which scrambles my 3rd layer numbers on different rows. I'm stumped. Again, any help would be great here.

  • Audio sync issues with variable frame rates as well as .ts files

    I'm using Premiere Pro CS6 and CC, in Windows 8.
    I bought an AverMedia Live Gamer HD card to capture 1080p footage with, and the the videos it produces work perfectly during playback. No sync issues whatsoever. I'm saving them as MP4 at 30fps.
    The problem is when I import them into Premiere Pro, the audio loses sync at certain points. After a bit of digging, I've discovered that the videos have a variable frame rate, which Premiere Pro does not support. I don't know why, considering competing products that are significantly cheaper can handle them with a problem, but oh well. The capture card can also save videos in .TS format, which produces a constant frame rate, however when I import them into Premire Pro the sync is immediately off by a second or more. I assume this is for an entirely different reason. Again, they play back normally without a problem. Upon emailing AverMedia, I was told this was Adobe's problem and there was nothing they could do about it.
    What I'm wondering is if there is any sort of realistic solution to this as of now. Is there any way that Premiere can work properly with files that have a variable frame rate? If not, is this being worked on?
    Or maybe there's a way to get the .TS files back in sync, that way the variable frame rate issue doesn't matter anyway.
    Converting the files is not a long term solution. I'm working with hours and hours of HD video, and it would take way too much time to do this.
    Manually resyncing the audio is also not a solution. Again, this would just be way too much wasted time with each project.
    The only solution I see as of now is to switch to Sony Vegas until this problem is resolved in Premiere, if it ever is. I'm really hoping there is some other way, so if anyone has an idea as to how to fix this, I'd really appreciate it.
    Thank you.
    tl/dr:
    Is there any way to get around Premiere Pro not working with variable framerates? My .TS files are also out of sync, is there any way to fix that? Without converting or manually resyncing.

    >If not, is this being worked on?
    Discussed many times before... never a "yes" answer to your question... tell Adobe what YOU want at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    If enough people make a request, Adobe MAY add the feature (I don't work for Adobe, so no guarantee of anything)

Maybe you are looking for