Encoding just a part of a long sequence - ALL audio clips are processed ?!?
I have a 60 minutes sequence - among other stuff, it has about 30 audio clips.
When I define my work area to be - let's say 45 secs and _Export_Media to AME, all audio clips from the source sequence are processed, what is time-consuming and boring.
Is there a way to avoid this ?
Yup.
Similar Messages
-
I just downloaded the new operating syaytem and all my apps are STUCK in the app store . I can open them in the app store but can NOT creat icons with them only open them
If they are in your iTunes library, sync them back to your phone. If not, restore your iCloud backup. If you don't have one, you'll have to redownload them as explained here: http://support.apple.com/kb/HT2519 (however this will not restore your app data).
-
I am using final cut express 4. It seems that any clip over a certain length, say 5 min, does not fully transfer! All shorter clips are perfectly fine. Is there some reason why longer clips are not fully transferred? (a half blue circle shows up on the transfer list, indicating that the clip was not fully transferred. When I check in the capture scratch folder, sure enough the whole clip is not there!
Is there some glitch in final cut express that only allows short clips to be transferred in full?Thanks for the reply. I'll try to answer all the questions (I am a relative novice). Your help is appreciated.
By the way, the other reply I received suggested the following:
In Final Cut Express>System Settings>Scratch Discs make sure the Limit Capture/Export File Segement Size To: is not checked.
I did this and it was already unchecked. So this is not the answer...
The strange thing is, I have been logging and transferring with FCE for 2 yrs without any problems at all with shorter clips, but have come up against the problem with long clips (over 5 or so min) the whole time. I got around it by simply making sure I stopped recording after less than 5 min while shooting footage. OR if I accidentally got a long clip, I import into imovie and then import into FCE. Not very streamline and I worry about compressions altering quality!
I am now trying to import a 20 min and a 17 min clip and it only transfers around 3 minutes of each, I have re-tried several times and it happens repeatedly. The blue circle in the transfer list shows up as a half blue circle instead of full. Clip cuts off after 3 or so minutes.
ANSWERS
how you are ingesting the files
From external flash drive connected directly to mac using FCE.
the format of the source footage
digital via ext flash memory. Frame size :1929X1080 / 25fps
what camera shot the footage
SONY HXR NX5
how you are connecting to the computer
from flash memory directly via usb
what version of FCE you are using
4
what OS your computer is running
10.6.8
what model Mac
macbook Pro intel Core i7
what drive you are using for Capture Scratch
3TB external drive (plenty of room left) -
I just updated the new iTunes and now all my playlists are gone!! What the heck?!
All my playlist are gone from itunes with the new update. If I click on "sync" it asks me to erase all my music and videos... Is there a way to avoid doing this? Thanks.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
In the unlikely event that your media has been wiped from your computer see Recover your iTunes library from your iPod or iOS device.
tt2 -
Help! I just opened my 15 " Macbook Pro, and all of my files are GONE! My icloud icon also disappeared. What happened and how do I fix it?
Hi Susan ...
Use Lion Recovery to repair the startup disk and reinstall the Mac OS X if necessary.
Lion Recovery can also help you restore your files from a Time Machine backup. -
I created my first movie using one long video (a montage of photos) clip created in Keynote and imported to Imovie. I added many music clips, some overlapping. I now want to lay down a new updated video clip, eliminate the original video, but retain the audio. Can I? And if so, how. I cant seem to
find the info anywhere in help.I would suggest that you go to iMovie/Preferences and make sure that Advanced Tools are enabled.
Then, you can drag your new video clip on top of your old clip and a popup menu should appear. Choose REPLACE. -
I just downloaded the new ios6 software and all my pictures are gone, why!?
i just downloaded the new ios6 and it took at least 2 hours for everything to load and i went to look at my pictures and they are allllll gone! all 1,000 of them, i dont know what to do and im freaking out because i love all my pictures and now there just GONE. i need help!
How did your pictures get there in the first place? If they were synched to your phone from iPhoto, just synch them on again.
-
TS4455 Why IMovie no longer shows all movie clips from movies from Kodak camera
I am on an IMac 10.6.8 2.16 ghz intel core 2 duo with 3 gb memory
I am using IMovie 11 (9.0.4)
My camera is a Kodak Playsport shooting hd video
On all of over 300 videos I have shot previously IMovie worked perfectly.
On the last 3 movies imported from the camera, I movie loads the preview and I can drag it into the stage but instead of opening up and showing all of the clips, it remains a single image exactly as it displays in the playlist
Nothing I click opens the frames. Thus the only want to edit is to open the file into the fine editing frame
But this is not as easy as it was before where I could see the clip and make the edits right there on the stage.
What has changed? What am I doing wrong?Hello awebstore,
It may be that the view in your Project environment has been zoomed out.
iMovie '11: Resize thumbnail images
http://support.apple.com/kb/PH2121
Hope this helps,
Allen -
All my Albums have a Cloud icon on them. I want to store all photos on my computer
I'm not worried about saving space Do I have no choice about storage?You don't have to have your photos in iCloud. In Photo's iCloud preference pane make sure ALL checkboxes are unchecked.
-
I just purchased a new iMac, and not all Youtube videos are not loading
some of them say "Video not Available".... i have an older PowerPc G5 hooked up next to this new one, and it plays the same youtube videos perfectly
Did you install the adobe flash player plugin? Download it only from the adobe flash player plugin download page. Mount the downloaded dmg and launch the installer. Check the agree to terms to enable the install button and then click the install button.
Once installed, the next launch of your browser should allow you to play youtube videos and flash videos on other flash video sites. -
Can no longer select or move audio clips on Narration track - what happened??
I began my first Adobe Premiere Elements 11 project this morning, a short video (5 mins) I intend to upload to YouTube. It's a comedy sketch involving inanimate objects that "talk", so it requires a lot of dialogue to be added to, in this case, the Narration track.
I am not new to Premiere Elements. In fact, I've done quite a bit of fairly complex editing on previous versions of the software (I upgraded to 11.0 from 8.0). I've never had this problem before.
After editing this project for well over 2 hours with no problem, I can suddently no longer move or even select any audio clip on my Narration track. They are just frozen and stuck there. Everything else works normally. I can select and move all other clips on all other tracks. Further, all audio clips will play, even the ones on the Narration track. However, I can no longer move, select, or even add any clip to the Narration track.
I opened a new project to see if the problem persisted, but it didn't - I could add, select, move audio clips on the Narration track just fine.
I'm stuck and bewildered. The project I've already invested 2-3 hours into seems permanently broken. The audio clips on my Narration track will play, but I can't select, move, or otherwise do anything to them.
My fear is not just that I'll have to start this project over again, but I'll never know when it will break again, and I'll lose all my work again.
Help!
Seriously, does anyone know what's happened?sleinbach
Thanks for the details. As I suggested this idea that I had after reading this thread may be just nonesense, but I thought it would be interesting to try.
This is recommended done with a copy of the project that you have now.
For now, let us assume that the missing track names are part of the locked Narration Track syndrome. I am not sure if your narration clip was generated in Premiere Elements narration feature or created elsewhere and brought into the program. That would be interesting information to have. But, nonetheless, moving forward with this idea.
Given you cannot move, delete, change, etc what is on this Narration Track. Whatever is on that Narration Track traces back to an original on the hard drive and probably is shown in Media Cache's (Adobe Folder) as conformed audio cfa and pek set.
a. Find the narration hard drive hard location and move it to a new location (special folder on hard drive). When you go back to the copy of the problem project, you should be greeted with one of those "Where is....?" messages. Cancel out of that. Do not do anything within that message dialog.
b. Right click the thumbnail for your narration in Project Media and select Replace Footage. Then browse to and select the original that you had moved to the computer desktop and the special folder there.. Click OK. That should restore the file (including whatever effects were made to the file) to the project.
c. Has any of that had any effect on unlocking the Narration Track?
Other maneuvers to try
a. Trying to locate and delete any cfa or pek files associated with the problem audio.
b. Switching to an Aero Theme for Windows if you do not have one set so far.
Thanks for giving all of that a look at.
ATR -
Importing tape into Imovie 11. How do I import all the clips as one long clip?
How do I import all the clips as one long clip? I have 45 min of footage and I want it as one long take I can edit in Final Cut ProX. When I import, all the clips are split up when the scene cuts. I just want the 45 min in one long video.
iMovie will import the tape as if it is direct from the camera. It will sense the scene breaks and put all the clips in chronological order.
If you want to import it as one long clip, I suggest you load the tape into the app that you edited the tape with. Then export it out as a QuickTime movie in the DV codec. You can import this MOV file into FCPX or iMovie. -
Multicam edit from nested sequence -- no audio?
Can someone please help me explain why I can change the video tracks as if they are multicam in my nested sequence, but I can't change the audio?
I created a sequence called "sync" which basically is all of my cameras, each on their own individual tracks, sync'd with each other, as they turned on and off throughout the shoot.
I cut this 'sync' sequence into my main timeline 'master', and then enabled multicam. I can now beautifully cut between cameras using the 'multicam' window and clicking on the preview of the shot I want as it plays. I've made my visual edit, but now I want to go back and choose my audio tracks, which it seems I can't do...
Furthermore, it seems that my nested sequence, which has video cut into V1 and audio cut into Stereo track A1, is only playing stereo track A2 from 'sync' when it's played on 'master'. It seems to be somewhat dependent on the tracks I have enabled on 'sync', but not entirely:
1) If all audio tracks are enabled on 'sync', only A2 will play from A1 on 'master'
2) If all audio tracks except for A2 are enabled on 'sync', no audio will play on 'master'
3) If only A2 is enabled on 'sync', only A2 will play from 'master'.
Is there any documentation about this behavior? Is it a bug? Is there any way to select a different audio track from 'sync' from the multicam edit window?
Thanks in advance!OK, maybe I should clarify...
Only A2 is coming through, NOT A1 -- so that's inconsistent with what you're saying. I have not checked Audio Follows Video, because that's not the bahvior I want. I'd like to be able to choose from any of the video tracks. Is that not possible in Premiere Pro?
Also, do you think it makes a difference that I'm 'multicam editing' from a regular sequence (with multicam enabled) as opposed to an actual multicam sequence?
thanks for the help. -
Hello forumites,
So I've run into an odd problem I haven't experienced before. I exported my docu film last night. I have my music audio on A1 and speech audio on A2 in the timeline. When reviewing it, the music audio plays back fine, but the speech audio is playing back slightly fast (resulting in a bit of a chipmunk effect) and it's crackling (possibly because of the speed-up). The video appears to be in sync with this weird speed-up.
I'm using Windows 8.1 Pro and the latest version of Adobe Premiere Pro CC. Although this is happening on two different systems, here are my computer specs.
PC 1:
Custom built desktop
CPU: FX-8350 4 GHz
Motherboard: ASUS Sabertooth 990FX R.2
Memory: 16 GB DDR3
SSD: 256 GB Samsung 840 EVO (Primary)
HDD: 2 TB WD Red (Data)
GPU: 2x Radeon 6950 (CrossFireX mode)
PC 2:
ASUS G53S laptop
CPU: Core i7-2830QM 2 GHz
Memory: 6 GB DDR3
SSD: 120 GB Crucial M4 (Primary)
HDD: Seagate 500 GB (Data)
GPU: GeForce 460M
I did a bit of troubleshooting and thought that perhaps I nested sequences too many times. So, I did a few test renders from the ground up on each sequence where the nesting gets deeper. I got up to two nesting levels (where one sequence has a nested sequence which contains a nested sequence - Sequence-ception ) with all audio rendered normally.
However, the next nesting level resulted in the audio issue. So, I copied and pasted the timeline from the previous sequence to the current sequence, overwriting the nested timeline. Oddly enough, it still caused the problematic audio, which has me thinking that it's not related to nested sequences after all.
Keep in mind that playback inside Premiere works fine. I even created a new sequence from scratch into which to paste the timeline. Also, encoding using different codecs didn't make a difference. Of course, I also did the basic things and updated my video card drivers, restarted my computer, uninstalled/reinstalled Premiere Pro and Media Encoder, and tried encoding without GPU hardware acceleration.
Here are some 5-second DNxHD renders to get a grasp of what the results are.
Double Nested: https://www.dropbox.com/s/0xp50qbm48gjupd/Double%20Nested.mxf?dl=0 (Good audio)
Triple Nested: Dropbox - Triple Nested.mxf (Bad audio)
I should probably mention that I configured symbolic links to remap the Users folder to my data drive, as that has been known to cause some problems with Windows, but I made sure to link all the assets in my project using the actual file paths rather than the symlinks. Also, I've been rendering other projects prior to the previous patch with this setup and didn't experience any issues.
Has this happened to anybody else as well? I did some searching for this issue but I'm apparently the only one. I'm just hoping this is some weird bug introduced in the last patch.That may be so, but why even have that feature if one can't even take full advantage of it? I'll be asking Adobe that if I don't get many suggestions or input here.
Thanks for responding, though! -
How can I OCR only part of a long document?
OCR with a pdf file is usually very simple. Not here. This is a legal-type document (PDF) with with line numbers on the left and vertical lines on both sides of the text I want to OCR. If OCR includes the line numbers I will have to spend hours removing them. The left side also include a law firm's name and the bottom has the title of the document, both of which I have blocked out. (Line numbering was fairly common on pre-printed legal stationery in the typewriter days; most courts have gotten beyond the way things were done in those days but obviously. It obviously makes OCR a challenge!) In much earlier versions of Acrobat I used a simple tool called Eraser from a British firm (long gone) that neatly erased anything from a pdf file, such as all the stuff I want to get rid of here, before running the OCR and saving the document as a Word file. That tool does not work with Acrobat 9 and the version I am now using, Acrobat X. Oh, and just retyping all the text is not an option for me.
There MUST be a way to do this! Any suggestions?Redaction will certainly do the job but it is horribly tedious**. My document is 19 pages. With 3 such redactions per page I am looking at close to 60 redactions, one at a time. All the redactions are identical. That is, the stuff I want to remove on the left side of the page is the same for each of the 19 pages. Same with the stuff to be removed on the right and the bottom. I can't see any way to apply my redaction to more than 1 page at a time. If doing so is impossible is there a way to extract (by cropping or otherwise) the part of the page I want to use? Obviously it is the same for all 19 pages. Is it possible that what I want to remove is in some removable "layer" separate from the text in question?
**Even more tedious than the low tech solution I have been using for the occasions when I confronted this problem:
Print a copy of the document
Using scissors cut out the stuff I want to get rid of, a few pages at a time.
Using Acrobat scan the resulting document
Save the result as a PDF file
Open the PDF file and save is as a Word file
Open the Word file and copy/paste the absurdly formatted text into a clean Word document. This strips out the bizarre formatting due to the scanning process.
Clean up the new Word document, save it and
Finally get to work using the text.
FYI the test I want to extract or get consists of written interrogatories or questions for which I must prepare responses. I want the responses to include the questions.
Maybe you are looking for
-
Lync Hybrid : Unable to write to active directory due to lack of permission
Hello everyone, I need a little help to troubleshoot a problem I have when moving a user to Lync Online. My client has a Dirsync and Adfs working perfectly with o365. My problem is that when I try to move a user to Lync Online I have this error : Mov
-
I can browse the internet using links but my pacman fails. I did pacman -Sy without problem. But nothing else works. Any tips? /Richard
-
PDFs are created incomplete on my MAC
Recently my PDFs are being created incomplete (bits left off) on my mac. Is anyone else having trouble?? Any solutions??
-
After installing Firefox 12.0 now it freezes on "checking add-ons" and won't open
I got an update notice and installed Firefox 12.0. I installed and the program froze during "Checking Your Add-Ons" portion of the install. Now Firefox will not open. Keeps getting stuck on that same step of the install. Tried installing 4 different
-
I NEED CS3 design premium for windows
Dear Adobe - do you have a way to buy previous software versions?? My main client uses CS3 Design Premium so that's what I need (no, I don't want to get CS4 and save everything down). Now that CS4 is out I can't find any way to get CS3 from Adobe.