Encoding process isn't working properly while making the disk image (or DVD)in my iDVD program. Is there a remedy for this?

I've used Old Toad's suggestion and made a disk image first because the DVDs I've tried to produce show a few pictures in playback and then go white. The slideshow works fine in the iDVD program, and in the initial rendering stage all seems o.k. until the encoding step. Then, it processes 4 or 5 pictures, then goes blank but the music continues to be processed. Is there a remedy for this (I know Apple has ditched the program and the optical drives.) I deleted the project and tried making it over from scratch, but no luck.

I am simply lookig for some help not an argument. I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts. I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another. As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP. This MBP was running Leopard when the problems started
I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue. I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion. In Windows 7 I am able to print and scan to my hearts content without any issues. I am able to browse the internet as much as I want. I close Fusion and try to connect to my printer via wireless and nothing.
In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems? Out of the 1000 + posts is there a consolidation of which answer is the best? BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time. Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. -- Thanks

Similar Messages

If I buy a sim free phone here and take it to the Ukraine, can I get a local sim card and the phone still work properly, while in the Ukraine?

If I buy a sim free phone here and take it to the Ukraine with me, can I get a card there in the Ukraine to use the phone with. If that is possible, when I return to the states can I get an AT & T sim card and the same phone work in the states? Thanks in advance for your help.

If you buy an unlocked phone, it will work on any compatible GSM network anywhere in the world. If you buy an unlocked phone in the US, it will not work on LTE networks outside of North America. The warranty is also only valid in the country where the phone was originally sold.

Pick activity is not working properly while creating two or more file adapt

Hi,
pick activity is not working properly while creating two or more file adapter for bpel process.
bpel process compiled and deployed succesfully but while observing the wsdl file of deployed process you can find only one file adapter. so it polls only from that location.
can anybody help on over this? or it's limitation of jdev to use only one file adapter at time while using Pick.
Thanks
sagar

Does anybody tried this?
Thanks
sagar

HT1267 My iPod player in my iPhone isn't working properly it will play for a few seconds then stop and also the volume level will appear then disappear what can I do to remedy this?

My iPod player within my iPhone isn't working properly when playing videos it will start then stop after a few seconds and also the sound bar appears then disappears, and when playing music no sound is coming out when I'm on a call I can hear everything properly and also on loud speaker! What can I do to remedy this? Please help!!!

If you haven't tried it yet, I'd eliminate memory issues first. Close all of the apps with the double tap on the home button method
http://support.apple.com/kb/HT5137
then restart the device.
http://support.apple.com/kb/HT1430
My experience has been that this fixes a lot of issues.

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

HT1526 I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

I can't delete any files, can't empty the trash bin, can't open my iTunes. Safari isn't working properly either. I keep getting the error message -50 when i try to delete anything...HELP!

Hello, not too helpful, but...
enum {
paramErr = -50, /*error in user parameter list*/
Usually means a bvad or unacceptable Charachter in a File or Folder name...
http://support.apple.com/kb/TA20831
Solving Trash Problems...
http://thexlab.com/faqs/trash.html
Open Console in Utilities & see if there are any clues or repeating messages when trying to open Safari or iTunes.

"Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
There is no documentation on how to solve this anywhere.
I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
Any help would be much appreciated
Kenneth

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

Back to my mac isn't working properly

After downloading Mavericks, (which went without a hitch), I am now receiving an error in system preferences stating: Back to my Mac isn't working properly
because the DNS server isn't responding. Contact your internet service provider for a different DNS server address, enter it in Network preferences and try again.
In reality everything wireless is working; the internet the printer iPad works fine.
I went to the Airport utility and clicked on my Time Capsule and it states: Change Airport base station from using DHCP and NAT to Bridge mode.
I done that and everything related to the wireless router runs real slow, I mean real slow. It took just under 4 minutes for my Time Capsule to recognize the computer. Due to this I received all kinds of errors from the printer from Airport Utility and the iPad.
I need a fix please, I've read all the support documents related to this in the support community and either the answers given I have tried with no success or they do not relate to my situuation.
Thank you for looking at this, I only hope you have a valid answer.
Jerry

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

[svn:osmf:] 9850: Removed full screen code since it isn't working properly.

Revision: 9850
Author:   [email protected]
Date:     2009-08-31 13:01:06 -0700 (Mon, 31 Aug 2009)
Log Message:
Removed full screen code since it isn't working properly.
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml

You have a tool, that doesn't work in a new version of java.
The tool vendor would be the one to determine whether the tool and/or the new VM has a problem.

Music player isn't working properly, there's no time slider

Since I updated my iphone4 to the latest software my fast forward bar in my music player has gone and I can't drag the song along to the desired place in the song. Please help

alexi sonlian wrote: my in-built webcam isn't working properly...
uf Applz http://support.apple.com/kb/HT2090 dunt helllppp, ("resot" sumtymz helllppp,) mak a gud bakkup. Than "... contact Apple or an Apple-Authorized Service Provider for service."
Same helllppp 4 iSight werkz 4 FaceTime n FaceTime HD camz 2.
alexi sonlian wrote: is it because of updating softwares or sumfin like dat? anyone?? helllppp!!
 > Software Update...
Messij wuz eddditubed by: EZ Jam
Mac OSX 10.7.4

Convolution.vi isn't working properly

I'm using LabView 7.0 and I'm trying to performing a convolution with the convolution.vi. This VI isn't working properly. As you can see in the attached file, the result isn't right even for very small input arrays. The result also depend on the input data format (singel or double etc.)
May be someone had the same problem, or knows something about it. I'm using LabView 7 on an Windows NT system, may be that has something to do with it.
Would be greatful about every hint,
best regards Andy
Attachments:
example_convoultionvi.vi ‏18 KB

Very strange...
Can you open the diagram of the convolution.vi, then double-click on the "Call Library Function Node". What is the Path? (It should be C:\Program Files\National Instruments\LabVIEW 7.0\resource\lvanlys.*).
Could ot be yours points somewhere else?
Now find the lvanlys.dll in explorer. The size of the LabVIEW 7.0 version should be 528384 bytes.
Do a search for lvanlys.dll. How many different versions show up?
LabVIEW Champion . Do more with less code and in less time .

HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

My trackpad is not working properly since installing the upgrade. What should I do?

My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

Encoding process isn't working properly while making the disk image (or DVD)in my iDVD program. Is there a remedy for this?

Similar Messages

Maybe you are looking for