Encore 1.5 can't import assets

Hi, I have been an Encore 1.51 user for years with no problems.  Now suddenly, half of my projects won't open at all, and I can't import any assets.  I use Premiere Pro 1.5 to edit video and have tried to export different types.  I get a message that says "could not import file.  The file may be corrupt or type may not be supported"  Does anyone have any ideas to solve this problem? 

Have you tried creating a New Project, and then attempting to Import any of the suspect files. If you have, with yet another New Project, can you Import any "known good" Assets?
I'm with Jbowden. When something works one day, but the next, then something has changed. You've ruled out CODEC's and CODEC "packs" - would be my first guess too.
How about any MS updates to your OS, or segments of it? By default, these updates are set to automatic, and take place behind the scenes, so the user might not even be aware of them. They have a tendency to render obsolete many audio and video drivers, though that does not seem to be an issue here. Still, OS updates can cause other problems. QuickTime Player is also vulnerable to these, and there is the smallest of chances that it could have some play here.
Any hardware, like a Matrox card, that was either installed, or uninstalled?
If no to all of these, then the uninstall and reinstall of Encore 1.5 would be my suggestion too. Let's hope that this fixes the problem.
Good luck,
Hunt
[Edit] any Adobe trial software installed, or uninstalled, like CS4?

Similar Messages

  • Can't import asset

    I am using DVDSP 3 and have been working along and all of a sudden, it won't let me import some files (from Compressor) into my project. It won't import anything (stills, etc). But, it will let me import these same assets into another project. Any reason why in one and not in another? Corruption? (I hope not!) It acts like it is loading the assets, they just don't show up. And I get no messages or any other flags.

    no - all NTSC. And I was able to import one asset, but not the other 2 that I wanted. I was able to import all 3 into a blank project.

  • Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

    Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
    If so how do I accomplish this act?
    Are their additional menus available for Encore CS4?

    The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
    As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
    Good luck,
    Hunt
    PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

  • How can we import Fixed asset of the current year ?

    Hi ,
    in 1272578 note , SAP Support explain that's it's not possible to create fixed asset of the current year( example = acquisition date = 2009-02-01 )  using import , but they gave no workaround .
    does it mean that we have to manually create all assets of the current year ? or there is another way ( using DI-API for example ) ?
    Thanks

    Good day
    The fixed asset master data import functionality in SAP Business One is used to import assets of the previous year. If you are to force the importation of current year assets some of them might load but system will not be able to calculate planned depreciation for that year, which will give u problems when u try to run depreciation forcing u to post manual depreciation.
    With manual depreciation will not look good on the Fixed Asset Master since it sort of duplicate depreciation ONLY on the Master your report will be fine.
    Capturing Current year assets manually will be the safer road.
    Thanks
    Louis

  • ENCORE DVD2.0 can't decode MP3 file?

    It is probably my fault although I do not know what I did wrong: I have been importing assets, including MP3 files, into Encore DVD2.0 for a 'long' time without any problem. I 'truncated' and faded in/out one MP3 in PrE7 and exported it to a folder from where I tried to import it back to Encore. Encore gave the following error message: "The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem". The "non-truncated" version of this MP3 file can still be imported into Encore. Thanks, Laci.

    This question might not belong here but it is also about audio, however audio in WMP v.12.0.7600.16667 (and also in VLC v.1.1.4). They do not play the audio in the 0000.m2ts video clip that I extracted from the Blu-ray disk that I burned from an AVCHD video with PrE 7. (I had to extract this file because just placing the BD disk in the LG BD player in my computer didn't work. (The BD disk plays both video and audio flawlessly on the standalone Panasonic Blu-ray player.) Also other video clips (e.g. MOV files) work fine on with both WMP and VLC. I downloaded the AC3 Codecs but it didn't help either. I would appreciate any help. Thanks, Laci. (BTW, my new editing computer is working but still experimenting with software. I will report on it as soon as everything works!)

  • Video Size on imported assets??

    Is there no way to import assets with a video resolution other than 720x576 and 704x576????

    JB, can Encore import XviD or DivX files? That surprises me. I would have thought a conversion to mpeg or DV AVI DVD compliant files would be required before import, as Patrick mentions.
    Patrick, even after importing larger files, Encore will transcode them to fit onto a DVD.

  • (How can we) Import Flash Professional .FLA file format?

    How can we import a Flash Professional .fla file format into Flash Catalyst? It would appear that we can't...at least not yet! I have added this as a feature request within the adobe labs site for Catalyst. Someone at Adobe suggested that I also explore the forums, so here we are. If you would also like to have this feature added, please let Adobe know by promoting the
    idea.
    Our use case is this: we have a large Flash file with a library of over one thousand skins and assets that were built in Flash with Adobe's Flex Skins Templates. These stateful, graphical skins were used within a custom theme by several Flex 3 projects.
    Now that we are looking to migrate to FlashBuilder 4, and start to use Spark components, we are trying to find a workflow that allows us to use Adobe tools and to reuse our existing vector artwork. Since we have such a large number of assets, we are exploring various approaches, including the use of JSFL. So far we haven't found a good way to migrate from Flash-built skins for Flex 3 to Catalyst-built skins for FlashBuilder 4.

    Hi Ajay,
    See attached V 7.0 example...
    Hope it helps,
    Nick
    Attachments:
    Read_txt_File.vi ‏20 KB

  • How can I import an ibook file back into iBook Author?

    I exported an ebook from iBook Author thinking it is the equivalent of saving the file.
    I did not save the file, I only exported it and than exited the program.
    My active file is vannished.
    I need to make some adjustments to the ebook, but can not bring it back up.
    Is there a way that I can re-import the iBook file back into iBook Author?
    When I open iBook Author and try to open the exported file the program does not recognise the ibook file...
    Thanks for your help!

    Check for previous versions of that book in iBA....even if not saved.
    You can dig into the .ibooks file by changing the suffix to zip, but you'll have to manually extract what you can from assets you find. Please only do this with your own books.

  • Can't import photos into Aperture

    Prior to upgrading I was using Aperture 2, I exported each project individually into folders - I decided to keep my photo organized by folders (and referenced) rather than in the Aperture library.
    I upgraded to Aperture 3.0.1.
    I can't import anything - either individually or by folder. Individually, I select import then navigate to the folder I'd like to import but I can't see any images in it, Aperture says 'loading assets' (I've left it there for hours). If I choose to import by folder, I can navigate to the folder, I see the image files but they are greyed out. I can click on import, but nothing happens.
    If I navigate to the folder in Finder, drag and drop it onto Projects in Aperture I see the green plus sign. I let go and nothing happens. Images are both RAW and JPEG.

    Prior to upgrading I was using Aperture 2, I exported each project individually into folders - I decided to keep my photo organized by folders (and referenced) rather than in the Aperture library.
    I upgraded to Aperture 3.0.1.
    I can't import anything - either individually or by folder. Individually, I select import then navigate to the folder I'd like to import but I can't see any images in it, Aperture says 'loading assets' (I've left it there for hours). If I choose to import by folder, I can navigate to the folder, I see the image files but they are greyed out. I can click on import, but nothing happens.
    If I navigate to the folder in Finder, drag and drop it onto Projects in Aperture I see the green plus sign. I let go and nothing happens. Images are both RAW and JPEG.

  • How can I Import 2 channel audio from a Sony PMW300 camera?

    How can I Import 2 channel audio from a Sony PMW300 camera?

    Terry Woolf
    Thanks for the reply.
    The link to your prior thread is
    Audio
    I suspect that the issue of no audio for your .mp4 file goes to your conversion method MXF to .mp4.
    Please excuse if I am saying what you already know. When you import your video into Premiere Elements (in your case 12 Mac), a project
    preset is established, either by you manually or the project automatically. That project preset contains a description of the project settings
    for audio as well as video. Unless you select one of the project presets which are described for use with 5.1 channel, your audio in video audio
    imports into a stereo project. It is in the export area that you will find your opportunity to customize (if necessary) the settings for audio.
    In the project, if applicable to your situation, you can duplicate an audio channel (See Fill Left or Fill Right under fx Effects/Audio Effects).
    Please let me ask this to make sure of the details.
    If you import your .mp4 with 2 channel audio (derived from your .mxf convert and dragged to Video Track 1/Audio Track 1) and cannot hear the sound....
    a. do you see any evidence for an audio file in the Timeline Audio track 1?
    b. if you do, how many wave forms do you see, one or two?
    c. if you have the audio meters opened while you are playing back the Timeline content in Edit area, do you see 1 or 2 channels and is
    there activity in both.
    d. when you import the file into Project Assets, do you observe any conforming activity going on in progress bar in the lower right cover of the workspace...if
    so, do you wait for it to go to completion before continuing on?
    We could also try deleting the conformed audio in the Media Cache Files Folder to force the program to re-conform the audio. See Edit Menu/Preferences/Scratch Disks should show you the location of the Media Cache Files Folder whose contents you will be deleting.
    Please review and consider, and then let me know if I targeted your question. If not, please do not hesitate to let me know, and I will rethink my reply based
    on your response.
    Thank you.
    ATR

  • What type of Business Processes can be imported in Solution Manager 7.1?

    Hello Together,
    currently i deal with the topic: BusinessProcessMonitoring.
    My question: what types of businessprocess can be imported in Solution manager 7.1?
    - exported processes out of the NetWeaverDeveloperStudio?
    - processes out of the CE?
    Some else....???
    I would be happy about some answers.
    Thanks and kind regards
    Henry Radziwolek

    Hi Henry,
    Today in Solman 7.1 onwards creation of business processes is really very and you can use the content upload interface which means you can upload the processes via excel file as well.
    so you can download it from other system into a flat file and upload the same in solman to quickly do the same.
    http://sapinsider.wispubs.com/Assets/Blogs/2012/January/Introducing-Content-Upload-Interface-in-SolMan-7-dot-1
    in terms of importing from another solman ...if you have a transport route ...definately you can create a TR and import the project with processes into your new solman system
    or if it is Solution in another system then also you can use solution transfer function/feature to import it.
    Also, if you are talking about Netweaver BPM tool this requires integration setup with solman (BPB) etc to do that like ARIS integration etc.
    Integrate your Business Blueprint with SAP Netweaver BPM
    hope this helps you further.
    Regards
    Prakhar

  • Error when importing Asset Legacy Data

    Hi Gurus,
    I get an error when I use LSMW and T.Code AS91 to import Asset Legacy Data...
    "AS91 S 00 347 Field ANW1-KNAFA . is not an input field".
    Is there a way to change that field to input?  Currently that field is greyed... If I do manual upload in the foreground, then it gives an warning but creates the Asset, but if we do it automatic in the background it fails.
    Can you help me on this.
    Thanks for you time.
    regards,
    Raj

    Hi Linda,
    Thanks for your reply.
    We are doing a mid year take over and the last depreciation was done in Dec 2006.
    I am using LSMW with T.code AS91.  Can you let me know where is this "transactional date" that we have to enter.
    I have seen that the master data gets uploaded, but with error in the last screen where the deprecitation is inputed, the error that I have explained in my post.  Can you help me on that?
    Thanks.
    regards,
    Raj

  • Problem with 'Import Asset' after SuperDrive replacement

    Hello. My SuperDrive was dead earlier this year and I replaced it last month. Ever since, I have been having trouble doing 'Import Asset' on DVD Studio Pro. Whenever I try to import a QuickTime(.mov) file, a message of "Incompatible Format" will pop up thus stop me from importing anything.
    Could someone help me with this please? Any ways to fix it? Thank you.

    Dear David,
    Thank you for answering my question. Would you suggest me to reinstall DVDSP? I installed everything as a chunk with my Final Cut Studio discs. Can I reinstall it individually?
    My DVDSP worked fine until my Superdrive crashed earlier this January. It has been like that ever since, even after the drive was fixed. I can burn DVD directly without DVDSP. I am sure DVDSP can burn DVD too, but I don't know what happened and now the "import asset" function won't work anymore. I don't know what to do.

  • DVDSP 3 CRASHES While Importing Assets

    Hi There,
    Having problems with DVDSP 3.02 Will not import assets. Crashes immediately.
    Here is the log file. Can anyone Help?
    Date/Time: 2005-10-12 23:27:17.247 -0500
    OS Version: 10.4.2 (Build 8C46)
    Report Version: 3
    Command: DVD Studio Pro
    Path: /Applications/DVD Studio Pro.app/Contents/MacOS/DVD Studio Pro
    Parent: WindowServer [63]
    Version: 3.0.2 (306)
    Build Version: 4
    Project Name: DSP
    Source Version: 3060000
    PID: 290
    Thread: 0
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNINVALIDADDRESS (0x0001) at 0x439f0020
    Thread 0 Crashed:
    0 <<00000000>>      0xfffeff18 objcmsgSendrtp + 24
    1 com.apple.AppKit      0x9377f140 -[NSProgressIndicator dealloc]
    + 332
    2 com.apple.AppKit      0x9361476c -[NSView release] + 200
    3 com.apple.CoreFoundation      0x9072e7c0 __CFArrayReleaseValues +
    436
    4 com.apple.CoreFoundation      0x9072e5f8 __CFArrayDeallocate + 284
    5 com.apple.CoreFoundation      0x9072b734 _CFRelease + 240
    6 com.apple.Foundation      0x9285f708 NSPopAutoreleasePool + 536
    7 com.apple.Foundation      0x92885d80 __NSFireTimer + 248
    8 com.apple.CoreFoundation      0x9075ed10 __CFRunLoopDoTimer + 184
    9 com.apple.CoreFoundation      0x9074b688 __CFRunLoopRun + 1680
    10 com.apple.CoreFoundation      0x9074ac3c CFRunLoopRunSpecific + 268
    11 com.apple.HIToolbox      0x93129ac0 RunCurrentEventLoopInMode
    + 264
    12 com.apple.HIToolbox      0x93129154 ReceiveNextEventCommon +
    380
    13 com.apple.HIToolbox      0x93128fc0 BlockUntilNextEventMatchingListInMode
    + 96
    14 com.apple.AppKit      0x93603e44 _DPSNextEvent + 384
    15 com.apple.AppKit      0x93603b08 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:]
    + 116
    16 com.apple.AppKit      0x9360006c -[NSApplication run] + 472
    17 com.apple.AppKit      0x936f08bc NSApplicationMain + 452
    18 com.apple.dvdstudiopro      0x0000cf68 0x1000 + 49000
    19 com.apple.dvdstudiopro      0x0000c65c 0x1000 + 46684
    20 dyld      0x8fe01048 dyldstart + 60
    Thread 1:
    0 libSystem.B.dylib      0x9002ca78 semaphorewait_signaltrap
    + 8
    1 libSystem.B.dylib      0x9003125c pthreadcondwait + 508
    2 com.apple.CoreGraphics      0x9060346c layerblitthread + 244
    3 libSystem.B.dylib      0x9002c3b4 pthreadbody + 96
    Thread 2:
    0 libSystem.B.dylib      0x9002ca78 semaphorewait_signaltrap
    + 8
    1 libSystem.B.dylib      0x9003125c pthreadcondwait + 508
    2 com.apple.Foundation      0x9288a0a0 -[NSConditionLock lockWhenCondition:]
    + 68
    3 com.apple.dvdbase      0x01042f38 -[ThreadSafeQueue headItem]
    + 52
    4 com.apple.dvdbase      0x01046014 -[MPEGEncoderManager generateMPEG_ThreadProc:]
    + 184
    5 com.apple.Foundation      0x92882f34 forkThreadForFunction + 108
    6 libSystem.B.dylib      0x9002c3b4 pthreadbody + 96
    Thread 3:
    0 libSystem.B.dylib      0x9002ca78 semaphorewait_signaltrap
    + 8
    1 libSystem.B.dylib      0x9003125c pthreadcondwait + 508
    2 com.apple.Foundation      0x9288a0a0 -[NSConditionLock lockWhenCondition:]
    + 68
    3 com.apple.dvdbase      0x01042f38 -[ThreadSafeQueue headItem]
    + 52
    4 com.apple.dvdbase      0x0104a5dc -[AIFFEncoderManager generateAIFF_ThreadProc:]
    + 148
    5 com.apple.Foundation      0x92882f34 forkThreadForFunction + 108
    6 libSystem.B.dylib      0x9002c3b4 pthreadbody + 96
    Thread 4:
    0 libSystem.B.dylib      0x9004ca38 syscallthreadswitch + 8
    1 com.apple.Foundation      0x9289b330 +[NSThread sleepUntilDate:]
    + 152
    2 com.apple.dvdbase      0x010462a0 -[MPEGEncoderManager checkEncoderServer]
    + 188
    3 com.apple.Foundation      0x92882f34 forkThreadForFunction + 108
    4 libSystem.B

    Hi Chris,
    Thanks for the reply. When I upgraded to Tiger I ran software update and it installed Pro Application Support. Is this a different patch? Because when I run software update it says my machine is up to date.
    What I did then was completely remove DVDSP, re-installed it, updated to DVDSP 3.02 and still no dice. I also trashed preferences and no luck. I'm at the point where I might do a complete erase and install on the system. Any other ideas?
    thanks,
    Juan

  • How can i import the AUC value when the project go-live

    Dear all experts,
    please help me on the following issue.
    our SAP project will go live in Jan 2010.
    there are some open investment projects to be imported in the PRD.
    the projects are settled to AUC when it is not completed.
    so the actual cost of open projects are the value of AUC.
    but i can not use AS91 to import the value for the AUC because the asset class is for investment measure.
    so  i want to know how can i import the value to AUC thanks a lot.

    Dear  Judy ZHU,
    You can do manual posting to FI using T code like FB50,
    Dr - Cost element(related to project cost ) & WBS
    Cr- CWIP account.
    After that run CJ88 for that project, your project expenses will be settled into AUC/Cost center.
    This is one proposed solution for this to my knowledge..
    SAP experts,  Please correct this if i'm wrong, since I' have not  practically used this method.
    Regards,
    Sam L.

Maybe you are looking for