Encore 1.5 -problem getting audio on the timeline

hi - newbie question!!!- i am trying to add audio to my mpeg2 video clip on the timeline in encore 1.5 - i believe you drag and drop the asset from the projects tab into the timeline but when i open the timeline and click the projects tab the timeline dissapears so i am unable to drop audio into the timeline.
is there any way of ensuring both tabs are open at the same time to allow this ?

What workspace do you have set up?
In our installation of Encore 1.5 it is perfectly possible to have the project assets list and a timeline both open at the same time.

Similar Messages

In Premier Pro CC How do I get audio into the timeline?

In Premier Pro CC How do I get audio into the timeline?

Did you make a sequence to fill the timeline first.
Quick way to do this is to do this:

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

I can get video on airplay anytime but i cannot get audio all the time. in sound output i select airplay but it only reverts back to internal speakers. same if i try earbuds. the only way to fix it is to restart computer. what do i do to fix it,

In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

Problem getting audio on a W540

Hi all I have been having some problems getting audio to work on my brand new W540. I have tried everything in terms of driver-updates, bios-updates, software-updates, registry cleaning (cc cleaner), removal and re-installation of drivers, etc. etc. but I am stuck with a little red cross on my speaker icon and the message "No audio output device is installed". I know this to be wrong though because at times I will have sound for a couple of days and then the little red cross pops back on. So I know that the sound works. It seems to be more of a software issue. Currently I am getting a warning that the "DDP UMDF Driver" is deactivated. A bit of googling around tells me that this means the driver (which happens to be an audio driver) is malfunctioning and should be re-installed, but all help as to how that can be done seizes to exist online past this point. Can anyone help me with this problem? I'd hate to have to send the laptop back in for maintenance because I am very dependent on it and because it works well in all other respects. Cheers Jakob

Having retried reinstalling with the recovery discs I was reminded what my problem was. I can't seem to get the system to boot up from the discs. Following the instructions from this link:
http://support.lenovo.com/us/en/documents/ht075445#win8_1 I go into the boot sequence and change it so that the external DVD drive (and anything that remotely sounds like it could be an external DVD drive) is on top (See below), but when I save and restart the computer simply restarts into windows instead of starting the recovery process with the discs. What am I doing wrong?

My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

One track of Audio in the timeline

I am only getting one track of audio in the timeline when I drag my clip from the viewer. In the viewer the audio is in stero, but when I drag it to the timeline it only one channel. Is there a setting that I change to get two channel of audio in the timeline?
Thanks for the help
JEFF

Right (or control + click) over in the patching bay at the left of the timeline and see if it sees both a1 and a2. Assign the one you can't see to a patch and that might bring it back.

How do I restore my video/audio in the Timeline of my project?

The whole timeline has windows that are red that say Media Offline. Where did my video/audio go??
Where do I find it? How do I restore it into the timeline I was working on with the project. When I open the project I also get a question that wants to know where is a specific file pertaining to this project.

Or, was it on a DVD, that you Imported directly, and now that DVD is not in the drive/burner?
When media is listed as Off-line, just as Steve mentions, the link between the Project file (.PREL) has been broken. This can happen, when one Moves files, Renames files, or those files are, for some other reason, not where the program last saw them. This ARTICLE will give you a bit more background on the .PREL files, plus some tips on Save/Save_As, etc.
Usually, one gets warning messages, and PrE will help you locate your files. It does a good job of this. Did you get any messages, when you Opened this Project? Did you Move, or Rename any media files?
Good luck,
Hunt

How do I slip audio in the timeline?

I'm trying to replace some bad audio with audio recorded on a separate digital recorder. I'm using the bad audio as a guide track to sync the replacement audio. How can I slip the new audio accurately to match the bad audio. In other words, is there a way to slip the replacement audio track in the timeline with frame or sub-frame accuracy? Thanks for the help.

Thanks, guys. I think the info will help. I was syncing by zooming in on the waveform and slipping it by hand by grabbing the audio clip till it synced up. Keyboard controls will make it easier.
One more question: Once the audio is in sync, how do I use the "mark in sync" command in the "Modify" menu to lock the sync. Right now it's greyed out. I've tried highlighting the new audio track, but can't seem to get the mark in sync to light up. Thanks again.

How do I link audio in the timeline?

My source audio is stereo mix but in the timeline each track is represented as if it were mono. It's just a bit annoying since every time I add an effect to one track I have to do it do the other. Is there a way to link the audio? What caused the audio to get unlinked in the first place?

To create a stereo pair:
1 Select a pair of mono audio clip items in the Timeline. (Use the Command key to select the second item, if necessary.) If you click one item of a linked pair, the other item is also selected.
2 Choose Modify > Stereo Pair (or press Option-L).
The stereo pair indicators appear on the selected clip items in the Timeline.
If the clip items you want to make into a stereo pair have different durations, the clip items are trimmed to the region where they both overlap. The levels, pan settings, and filters that were applied to the top clip are applied to both, and the clip attributes from the bottom clip are ignored.
+Source: Final Cut Pro User Manual+
What caused the audio to get unlinked in the first place?
Make sure the button for stereo pair is active in Log & Capture's Clip Settings:
Message was edited by: Nick Holmes

Dragging audio into the timeline

hello, when I drag a loop from the loop library into a timeline in garageband, the loop will automatically play back at the tempo set up for the project, my question is will a file that is not from the loop library, either a third party loop or an audio file that I create also conform to the tempo set for the project, if I drag it into the timeline. thank you rb

If you drag an external file into the timeline, it will be an orange region and will not follow tempo changes. To achieve that, you have to turn it into a purple region (press control-option-g and click anywhere in the timeline) and check the box "follow pitch & tempo".

When I perform a split audio edit, the timeline doesn't show it when the clips are collapsed!

Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks

libovh wrote:
Especially the clip whose audio is 'covering' another... the timeline doesn't show it's audio as extending, and it would appear only that the clip for which audio has been shortened, is still there, or at "0"... what gives? If you uncollapse the audio, or detach it, you do, once again, see the split audio.
Thanks
Like Zambonisurfer suggested, this is so by design.

Problem inserting audio track into timeline

Sorry, I'm a newbie, and I'm sure this is a dumb question -- but I can't seem to answer it myself.
Working with the latest Windows CS6 update and 1080/60p video from my Panasonic AVCHD camcorder, I find the only way I can move a clip from the Source Monitor to the Timeline is by dragging and dropping. Any other method (clicking on the "insert" icon, keyboard shortcuts) moves only the video, leaving the audio behind.
What am I doing wrong, or what do I not understand?

Okay, that sent me in the right direction. Now I understand.
Thank you!

No Audio in the timeline and no sound as well using CS4

We have installed CS4 Premiere Pro. When we imported a video clip, there was an error message "audio conforming error". the image part showed up but there was nothing (no sound, no wave length on the timeline). We can work on this video file on CS3 version on the other computer. Please help.
Lily

Kevin,
It has been suggested by several, that the workaround that you mention, no longer works with CS4. I do not have it, so I cannot check the validity of those suggestions.
Still, when faced with material that proves problematic for PrPro (any version) to handle, one can most often find a way to convert that material to something that WILL work better. Sometimes there is a quality hit, but this has often taken place BEFORE the conversion.
To borrow on Harm's example and to paraphrase, if faced with the prospect of trying to drive a screw with a hammer, if one replaces the screw with a nail, things will likely go much more smoothly. Now, in so doing, the connection made with the nail will likely not be a good, or as strong, as with the screw, but will often work. That's what the conversion does.
The Premiere-wiki has many good suggestions for conversion techniques and programs. There is even one for Converting AC3 Audio.
Hunt
[Edit] Oops, Eddie has already posted the wiki links much earlier in the post.

Problem Moving Clips in the Timeline

When I edited previously, I was able to drag one clip close to another, and it would automatically go directly next to that clip in the timeline. Also, when using the razor tool, bringing the razor close to the playhead would cause the cut to be made exactly where the playhead was in the timeline. This suddenly stopped happening--now when placing one clip next to another, it does not automatically stop where the next clip begins, and I have to be very careful so that they don't overlap in the timeline. The razor tool is likewise not drawn to the playhead.
I'm sure that I must have inadvertently hit a button that caused this, but cannot figure out what I did. I've looked around trying to find out how to fix the problem, but I haven't been able to find anything. I'm sure the answer is probably quite obvious, so I appreciate the understanding, and I would be very grateful for any help.

Welcome to the forum!
Sounds like you have inadvertently turn Snapping off. The n key toggles it off and on. There should also be a button near the upper right of the Timeline window for it.
-DH

Where to put Get URL on the timeline?

Ok if i have a symbol
and i double click it then can i put a get URL? Or where on the timeline
should it go.

Take your symbol, a movieclip or a button, and place it on the stage. Don't doubleclick it or anything, just have it selected and in the Properties panel assign it an instance name (where it says "<Instance Name>")... Let's say you name it "urlBtn", ...no special reason.
Make a new layer on the timeline and label it actions (or something to indicate it's a code layer). In the same frame as where the button is, but on the actions layer put your getURL code using the instance name you assigned...
urlBtn.onRelease = function(){
getURL(http://www....etc,"_self");

Encore 1.5 -problem getting audio on the timeline

Similar Messages

Maybe you are looking for