Encore 1.5 projects not playing audio in Encore 2.0

So far, four out of five transcoded projects I created in Encore 1.5 will not play audio in Encore 2.0. I can open the projects up in 1.5 and get audio with video. I close 1.5, start up 2.0 and load the project. Previewing it results in a silent movie. No audio whatsoever.
Other projects have converted fine. I notice that no Audio Conforming goes on for the non-audio projects, while I see Audio Conforming for the lone 3min 30sec project that does have functional video. Am I missing something here?

Okay, stupid me. Not enough disk space on the drive where the project is located. Once I cleared off some space, the Audio Conforming bar went ahead and I have my audio.
By the way, I was looking at the Windows Task Manager, not the Progress panel.
I grumble just a little bit because there is no error message or notification of insufficient disk space. Only a mute Encore.

Similar Messages

PROJECT BUG: Playhead skipping back 3/4 beat. Logic not playing audio

Only in one project is Logic not playing audio/the playhead is not moving forward.
The playhead moves back a few ticks when I press spacebar or click play on the transport. It does not continue after this.
Please help!
Jack

Try using the Selective Track Import feature to import each track to a new project.....
http://music.tutsplus.com/tutorials/how-to-use-selective-track-import-in-logic-p ro-9--audio-3181
The tutorial is for LP9 but it works much the same way in LPX.....

How do i get the "part of project not played" error to stop?

My garageband app lately has been absolutely awful and everytime i do any recording will not let me play it back if im playing multiple tracks over eachother. In one project I have there is only one real acoustic track and when trying to record over it I am not able because a message is constantly popping up saying that the project can't be played because it has too many tracks, effects, or notes. I don't understand how this can be the case as I only have two tracks, no effects and minimal notes so there doesn't seem to be any reason why the project shouldn't be able to be played or recorded in real-time. Any help/suggestions are greatly appreciated.

In addition to Edgar's explanation -
is your profile signature "GarageBand (Mac) '11, OS X Mountain Lion (10.8.5)" still current? Just in case you already upgraded to OS X Mavericks, make sure you updated to the latest version 10.9.2. The 10.9.1 version had problems with the memory management, that have been fixed in the new update.
You can check, how much memory is used by your applications from the "Activity Monitor" utility. You will find it in the "Utilities" folder in the "Applications" folder. Launch it and click the "Memory" tab, to see which applications are competing with GarageBand for the memory and should better be closed.
To free as much memory as possible at once, restart the computer, if you are continually seeing "Part of project not played".

Why does my ipod not play audio?

my ipod touch 4th gen 16gb will not play audio unless it has headphones in. it is second hadn but the seller said nothing about this and the ipod is in perfect condition except for this. i have tried putting the headphones in and out and resetting the ipod, neither of these made any difference. when i play a video or a track without headphones in, the volume slider disappears as if there is no audio file. alarms and facetime sound effects etc still play so i dont think the speakers are broken. please help.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

My 2nd generation ipod touch will not play audio books

My 2nd generation ipod touch will not play audio books. How do I fix this? I downloaded the books from iTunes on my computer. I loaded them on my ipod. It shows them on my ipod. It will go to the menu where you can choose which book and then actually pulls up the book then acts like it is going to play. Then it just goes back to the list of books. It won't play any of them. It will play music though.
How do I fix this?

The books do play in iTunes on the computer, right?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and audion book and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

What would cause my cd player to not play audio?

what would cause my cd player to not play audio? when cd inserted into the computer it pauses for a few seconds &then ejects cd.

theredness wrote:
what would cause my cd player to not play audio?
Your CD player? Or the CD drive in your MacBook Pro?
Assuming the latter, several things. Begin with
Intel-based Macs: Resetting the System Management Controller (SMC)
<http://support.apple.com/kb/HT3964>

Ios 8 iphone can not play audio message in imessage

Seems I can send sound clips from my iPhone 5, but when someone sends me one I get a box with a ? in it and can not play it even though it says I have received an audio message. If I am at the lock screen I can hit play but then it appears to freeze.
Any ideas? Below is what I see in my messages.. they should be audio messages.

Just downloaded it about an hour ago and the same thing happened to me. I guess I should just wait it out then?

Macbook Pro does not play audio part of video

Hi,
I have a Macbook Pro (early 2013 with OS 10.10.1).
A colleague sent me a video file, which was originally recorded in MTS format. The sound portion of it does not play on my machine, although it generally can handle MTS. I have a colleague with a Windows PC, for him the audio plays ok. I have another colleague with an older MBP, for him the audio also plays ok. But then I have two more colleagues with a newer MBP like me, and for none of us the audio plays at all. The strange thing is that I can open the file in various editors such as Premiere, Audition, or Logic Pro, and they would all show the waveform of the audio, even the VU meters react normally, but there still is no audible sound.
On the machines that play the sound, we have tried converting the video and exporting the audio portion into various other formats, but with the very same result. None of them play sound for me. This is extremely weird and we have no answer what could be the problem.
Any help would be very much appreciated.
Thanks a lot & best regards,
Rainer

Hi Eric,
thanks for the reply.
As I said, we had tried several editors and players, as well as all kinds of formats, using all kinds of converters, but so far to no avail.
The AAC codec is a common codec for the Mac, so there should be no need to convert it. I have videos with that codec that play ok. It already turned out that converting the video file to other formats does not make any difference.
But thanks anyway,
Rainer

ITunes 7.1.1.5 will not play audio from inserted cd

I have been experiencing an issue with iTunes on my PC. It will not play any audio from inserted discs. This includes burned discs and commercial discs. When I attempt to play the music the song will stay highlighted briefly, about 2 sec., and then it goes directly to the next song on the disc. This continues through the disc to the end. I experience the same issue when trying to import the disc.
I have tried removing the iTunes application and doing a fresh re-install, but I have the same issue.
Also, this is on a PC, and I am able to open the disc's in question and play the content fine within Media Player.
Any idea's on this would be greatly appreciated!
Dell Latitude D410 Windows XP

Here is my Diagnostics log:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Latitude D410
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
Connected Device Information:
DiskDrive, FUJITSU MHV2040AH, Bus Type ATA, Bus Address [0,0]
DiskDrive, Apple iPod USB Device, Bus Type USB
DiskDrive, SanDisk U3 Cruzer Micro USB Device, Bus Type USB
CDROM, TSSTcorp CDRW/DVD TSL462C USB Device, Bus Type USB
Check the Windows Update website to verify that you have the latest service packs and patches for your OS. Service packs affect the performance of USB and firewire CD / DVD drives.
D: TSSTcorp CDRW/DVD TSL462C, Rev DE01
Audio CD in drive.
Found 13 songs on CD, playing time 48:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:48:56
Track 3, start time 07:49:53
Track 4, start time 10:46:57
Track 5, start time 14:11:62
Track 6, start time 18:12:35
Track 7, start time 21:35:67
Track 8, start time 25:03:11
Track 9, start time 28:05:61
Track 10, start time 31:23:07
Track 11, start time 35:01:65
Track 12, start time 40:00:61
Track 13, start time 44:30:26
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 16 20 24.
The drive CDRW speeds are: 4.

10.1.3 crashing and not playing audio

I updated to 10.1.3 on my new 6 core mac pro. now having problems. I can't play anything in my preview window. I hit play, the k,j,l keys and still get nothing. I can scrub through the clip in the bin, but it won't play audio or video. I have to drag the clip to the timeline then edit or play from there.
when I try to switch clip views from list to filmstrip view FCP crashes.
I can't edit or view clips. What is going on?

Hi
A decision was taken to remove that functionality, a new desktop tool to build reports is not far off ... I know, I know but what about now !
with 10.1.3.2 you can build the extract portion of the report in your browser, then using the BI Publisher > Login on the new Word plugin you can log in to the server, find your report, create a new template, test it and then upload it back to the server from word avoiding the web interface entirely.
This should be in the help for th new builder?
Tim

Quicktime does not play audio

I've found that since upgrading to Lion, that some .mov files do not play the audio soundtrack when you play them in Quicktime 10.1.
Audio is fine in Quicktime Player 7
Is this a bug with Lion?

Some third party software can change the default settings in the Audio MIDI setup.
Open the app (found in your Utilities folder) and change the audio output settings to 44100Hz and try the file again.

Flash Player 10 is not playing audio from Youtube with Vista and IE

Since installing FP10, I cannot get audio when playing YouTube video. I'm running Vista with SP2 and IE on an HP laptop. Flash 0 on my XP desktop plays audio fine, so I'm guessing its a setting on my laptop which needs changing back to what it was before the upgrade to FP10...any ideas please? I have uninstalled and the reinstalled FP10 as per other posts on this forum, but no success.

I too am experiencing this
[edit]
My problem was that I was not getting flash audio at all, including local publishes out of the IDE. The problem was that my Windows Audio service had stopped (for some reason).
To check :
(classic view) :: Start > Settings > Control Panel > Administrative Tools > Services >
(non-classic) :: Computer (right click) > Manage > Services and Applications > services >
(one of the above, then) :: [scroll down to 'Windows Audio'] > r-click 'properties', general tab, set the start-up type to manual (in the dropdown), and click the start button on the next line.

Safari will not play audio.

Safari stopped playing audio for me on my MacBook Air. The audio on the computer works because i can get audio with full volume when i play a file on iTunes. Please help me with what might be wrong.

Welcome to Apple Support Communities. We're users here, and do not speak for "Apple Inc."
The NPR page uses Flash, and apparently does not have an equivalent HTML5 page.
If you're using Click-To-Flash and/or Click-To-Plug-in in Safari, make sure Flash is permitted on the page in question.

Premiere Pro CS6 not playing audio on imported MP4 files.

I am editing a series of MP4 clips shot with a Canon Vixia, and for some reason, Premiere Pro CS6 will not play the audio on a few of the imported files. All of the clips were videotaped with the same camera. I know that there is audio on the clips in question, because it works fine when they are opened in Windows Media Player. I have deleted and reimported the faulty files, to no avail. I noticed in the online discussions that several others have had this problem; but I haven't been ablet o find an online fix thus far. I would greatly appreciate advice on this!

I have a Canon Vixia HFS100, which saves AVCHD files to an SD card... exactly what model is your camera?
If you are copying from an SD card to your hard drive, read these two links
Metadata contained in folder http://forums.adobe.com/thread/1015001?tstart=0
-and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

Videos in keynote for ios do not play audio...

I have two quicktime videos that I want to play in a keynote presentation. The videos and their audio play perfectly out of my Photos folder on the iPad but when I insert them in a Keynote presentation, the video is great but the audio does not play. Help! I am using Keynote for ios. Would it help if I created the presentation on my mac and then sent it to the iPad?

FOUND THE SOLUTION:
I had this same problem and this resolved it for me:
-Go to your "Settings" icon and click on the "General" tab.
-About 2/3 way down the page you will see "Use side switch to:" - make sure "mute" is checked rather than "lock rotation."
-Then make sure the side switch, located next to the volume toggle switch on the side of your ipad, is moved to the right (no red dot showing).
My audio worked fine in embedded videos after I did those two things. Hope it works for you.

Encore 1.5 projects not playing audio in Encore 2.0

Similar Messages

Maybe you are looking for