Encore 2.0 Audio and DVD Player Compatibility

Hello
I've made about 200 dvd's for a dance recital I've edited. This is my first year using 2.0 and have already had 2 people come back saying all they can hear is the applause track, and no music (in premiere, I had an audio timeline with just music from the soundboard, and one timeline for a stage mic to catch tapdances and applause). Once premiere renders the audio, I assumed it would all become one track in encore, which it appears to be. I looked in the settings, and it appears to have defaulted to dolby audio. Is this going to be a big problem? I'm not sure what encore 1.0 defaulted to for audio. I've tested my dvd's on my own stand-alone dvd player and it works fine.
Thanks for any input.

Thanks for writing back. I did burn at 4x, and used TDK media (which I assumed was ok)...in the past 2 years that I've done this project, I used encore 1.0 with no problems (other than the standard +R vs -R problems).
I'll check the data rate, but I think it was well below the 7,000 level. I was just curious as to why certain dvd players would screen out the main track?..which is odd since there are only 2 assets in the project (besides menus) "audio" and "video", one each on the main timeline. How do you output your videos in encore 2? Do you use pcm or dolby digital?
Thanks again.

Similar Messages

Installing Wii gaming system and DVD player

How do I install my Wii gaming system and DVD player? I have an old floor model tv. Prior to Fios, I used a RF audio/video modulator. I still have old movies that my kids want to watch. Thanks! I'm not purchasing a new tv when the old one still works.
Solved!
Go to Solution.

Fios should not change anything when it comes to your DVD player or Wii. If you don't have the connectors for everything I would suggest something like a RCA splitter. I take it you dont have a HDTV.

Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

Uninstalling Touchsmart--will webcam and dvd player still work?

I want to uninstall the touchsmart features on my 610 running Windows 7 Professional. I do not use touchsmart and the touch capability causes problems--for example, my screen can be messed up, I assume by staic electricit, if a piece of paper is moved near it.
My question is this: Will the webcam and dvd player still work after the touchsmart programs are removed.
Thanks to anyone who can help.

Hi,
You can disable it using the following methods. Others will stay and work:
http://www.ehow.com/how_7499070_disable-hp-6001050-touchsmart-tutorial.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Mountain lion slow and dvd player doesn't work, help?

after updating to mountain lion everything moves very slowly when booting, logging in, or trying to type something in the texts fields. it also crashes and freezes up a lot and dvd player just tried to read the disk then spits it back out, the hard drive is brand new so is this a problem with mountain lion because i had no problems with any of this before the update? any ideas on what i should do?

Go to the App Store for a ML updater just released.

What kind of HDMI switch is recommended? We have a Smsung TV and DVD player along with the Apple TV.

What kind of HDMI switch is recommended? We have a Saimsung TV and DVD player along with the Apple TV.. The switch we bought works for a few days and then starts cutting out. Thanks.

Does the TV not have multiple HDMI inputs?
There are no "recommended" switches.
Buy a quality device that gets good reviews.

Using OS X 10.8.4. Installed iLife 11 to get iDVD. iMovie ready to burn through iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Using OS X 10.8.4. Installed iLife 11 and got iDVD. iMovie ready in iDVD. Attempted burn. iDVD says burn is complete. Burn lines are on DVD+R. Same disk cannot be read and is considered blank by computer and DVD player. How do I burn properly?

Hello TchrDi,
I suggest this article named Archived - iDVD: Troubleshooting issues with burning discs found here http://support.apple.com/kb/ht1583.
It is pretty lengthy, but also pretty thorough.
Cheers,
Sterling

[NEW] Xanim: animations, audio and video player

Xanim is an animation, audio and video player for various formats. It's popular on Unix systems. Enjoy!
PKGBUILD:
# Contributor: Eric Belanger <[email protected]>
pkgname=xanim
pkgver=2.80.1
pkgrel=1
pkgdesc="XAnim is a program that can play animations, audio and video of various formats"
url="http://smurfland.cit.buffalo.edu/xanim/home.html"
license=""
depends=('x-server' 'glibc')
makedepends=('sed' 'x-server' 'zlib')
source=(http://smurfland.cit.buffalo.edu/xanim/files/${pkgname}2801.tar.gz)
md5sums=('e2ecd086c160f18dd7cc3cac438758c2')
build() {
cd $startdir/src/${pkgname}2801
xmkmf
sed -i 's=INCROOT = /usr/X11R6/include=INCROOT = /usr/X11R6/include/X11=' Makefile
cp docs/xanim.man .
make || return 1
make DESTDIR=$startdir/pkg install
make DESTDIR=$startdir/pkg install.man

Thanks for this. I was looking around all over the place for it, and then I come to the ol faithful archlinux forums, and someone has the pkgbuild for it.

Create a DVD using Premiere Pro and Encore - delay between audio and video (in ms)?

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
My sequence settings in Premiere are:
DV PAL, 25 fps, 720x576 (16:9), D1/DV PAL Widescreen, lower field first, Audio: 48000 Hz
My DVD settings in Encore are:
MPEG-2 (MainConcept MPEG-Video), 720x576, 25 fps, lower field first, Widescreen 16:9 (1,458), Bitrate VBR, 2-Pass, Min 1,5 MBit/s Target 4 MBit/s, Max 9 MBit/s, GOP: M-Frames 3, N-Frames 12, Audio: Dolby Digital, 192 kbit/s

I created a DVD and need to be sure that audio and video are in perfect sync (smaller than 1 millisecond).
Is this even possible with Premiere Pro / with DVDs in general?
Frame accurate is the best you can achieve and that means 33 milliseconds at best.

DVD created with Encore won't play on DVD player

Hello everyone,
I didn't reply to the other topic I posted here, but that problem (I think) is fixed. It turned out to be a size problem. I just reencoded the main movie at a lower bitrate and that problem should be resolved.
The final disc image now comes out at about 6.8-7gb out of an 8.5gb dual layer disc. So I should have plenty of room with no space issues.
However, I am having a new problem that I didn't have before. I really am feeling a time crunch to finish this project in the next day or two. Everything is finished. It looks great. I built an iso with Adobe Encore and mounted it and tested it in PowerDVD.
Everything was completely flawless. All the menus, the videos, the animation, everything.
So I go to burn the disc with Imgburn. I burn it at 2.4x (the slowest my drive will write at). Anyway, when it is finished it will NOT play on my dvd player. Actually, I am using a PS3 to test it out but it is the only dvd player I have to use right now. I have burned many discs with Encore before and they all worked great on my PS3.
So, I have traded one problem for another. When I posted my previous topic, that disc I burned played on my PS3. Part of the video was cut off but it played at least. I can get the disc to play on my computer though. I don't know if it is reading it as a folder or what.
I have tried redoing the project from scratch twice. I removed all the assets, started a new project and carefully imported all the menus, videos and subtitles one at a time to be sure I didn't do anything wrong. I looked for any settings that could be screwing things up but I couldn't find any. I think I burned three or four discs that have all turned out the same.
Are there any specific settings that I might be missing? Why would my disc not be playing in my PS3?
Please help me finish this project.

I am using a PC, Windows 7 64bit.
The burner is an LG WH08LS20.
The media is Verbatim DataLifePlus Inkjet Printable DVD+R DL discs.
The problem is I have created many, many discs using Encore that have played perfectly fine on my PS3. In fact, just a couple days ago when I created the last topic I created a dvd that played fine on my PS3. It had problems with cutting off parts of the video like I said, but at least it played.
I don't think I am doing anything different in the creation of these discs now. I am completely stumped.
When I put the disc in my ps3 nothing happens. The dvd doesn't load automatically. And there is no option under "video" to select it.
Do you have any ideas that could help me fix this problem?

Sudden loss of audio in "DVD Player" app

I'm not sure where to post this so I am not sure if this can be redirected to the proper forum, but my problem is that audio worked fine while watching movies in the DVD Player app (default app) and just now I paused a movie to grab some food and when I hit play I lost audio...I switched DVD's and still nothing..I went on youtube and itunes and the audio works fine there...so I am totally clueless to what the problem here is..

Check the settings in the "Audio": section of DVD Player's "Disc Setup" preference.

No Audio from DVD Player

Mac Pro
OS X 10.4.8 - QuickTime 7.1.3 -
Having a strange problem when trying to play DVD's.
DVD Player plays the images but I get no audio.
I've fiddled with the DVD's language options and
the DVD player controls but still nothing.
So far I've had this problem with all twelve DVD's I experimented with.
CD's, QuickTime, MP3, etc. files play fine - no problems so the problem seems to be DVD Player.
Thanks

I am having the same problem with my G5. It just started today. The most recent update I have done was yesterday to the latest version of iTunes. I have also updated my Powerbook but it hasn't seemed to have affected it yet. I have tried playing DVD's in the VLC media player and at first I get no audio as well but if I change the audio setting from "built-in (encoded)" to just "built-in" it pays back the audio fine. Any ideas?

Disk Utility Burning CDs and DVDs Windows Compatibility

I don't burn many CDs or DVDs. However, a friend of mine recently switched to Apple, and he burns quite a few movies and CDs. He asked me how to copy DVDs, burn Audio CDs, and save files to CDs and DVDs. The only thing I knew how to do was to burn files to CDs. I know that CDs that are burned in the Finder will work on Mac OS and Windows. My question is about Disk Utility. I've read that Disk Utility does not create Windows compatible disks, however Apple's instructions for making a copy of a movie DVD are to use Disk Utility and create a CD/DVD master image to burn to a DVD. Disk Utility uses the .cdr format, which supposedly does not work with Windows. So, if I wanted to copy a Windows application CD, could disk utility make an exact copy of it or not? It seems to me that it should since I am making an exact copy using CD/DVD master, but will it do it or not? Also, if I made a copy of a Movie DVD using CD/DVD master (.cdr) will it only play on Macs or will it play on Windows also? When it comes to Audio CDs, I realize one must use iTunes to make Audio CDs. I have searched all over the internet for answers to these questions and most people say use Roxio Toast or they just don't answer these questions very clearly.

If you have two optical drives connected to your computer, you can just clone the disc. However, I'd recommend Roxio Toast, as others have, because it'll handle all the compatibility issues for you. Dealing with Finder and Disk Utility guarantees compatibility with macs, but not necessarily Windows, or even standard DVD/CD players depending on how you burn it.
If you have audio files, use iTunes to burn an audio CD. If you have movie files, use iDVD or Toast to burn a standard DVD (not a data disc).

Audigy 2 ZS Remote control (RM-1500) and DVD-player. (Need he

I've got Audigy 2 ZS platinum with remote RM-500, but software included in package allows to play only DVD-audio. Creative recomend to install InterVideo DVD 5 to play video DVD with Creative Audio-DVD program.
I've got InterVideo DVD 6 Platinum, but it doesn't controlled by RM-500 (there is no problems with my logitech Cordless keyboard with media buttons). As I found out there is differens in buttons menu: Creative use Enter for play, Spase bar for Pause, ect., but standart windows programs use Ctr+P and Ctr+Shift+P.
Does Creative have patch that solve this problem. To have remote that cann't contol DVD player (exept Audio DVD) is useless stuff.

Skeleton,
Have you added the DVD player software to the external applications listing under the remote control tab in MediaSource settings. The controls on the remote are mapped to the keys as defined by Microsoft. If the program is compliant to this then it should work.
Jeremy

I have a new MacBook Air with a USB super drive. I put in the DVD and I get nothing. No icon on the desk top and DVD player is no help. How do I play a DVD or eject the one in now?

I have a new MacBook Air with a USB super drive. I put in a DVD and I get nothing. No Icon on the desk top, no help from DVD player. How do I get it to play and how to eject it now that it's in?

There's a defect. The computer is in warranty so take it in for repair.

Encore 2.0 Audio and DVD Player Compatibility

Similar Messages

Maybe you are looking for