Encore 2.0 does not show slideshow subtitiles in preview or DVD

I see this same problem in the past few months with CS3. I have the Master Collection with CS4 that has never worked on both my computers. My old copy of Encore 2.0 does work but I can't figure out how to add subtitles to my 37 slides.  I clicked add subtitles, with discription and it shows on the Encore monitor. Looks like I have to use the Specify Link Dialog or an option to activate subtitiles when I preview my DVD. For the life of me, I don't see where I can do that! Can anybody tell me where this is?
Thank you
Art

You do that from the Button properties in the Link field.
Select the button that you are linking to the slideshow with, look in Properties and then click the arrow on the right in the Links field and when the popup menu comes up, choose Specify Link. From here, you can set the subtitle track to be active (choose Track 1).

Similar Messages

  • ARQ: Role Import does not show roles in the preview

    Dear All,
    Recently I upgraded our system to SP#14. Now when I try to import roles from NWBC->AM->Role Mass Maintenance->Role Import, it does not show roles in preview. Also, it does not import the roles specified. (either a range or full name of the role). It does not even give any error message.
    I implemented SAP note#1897975 Role import does not show roles in the preview.
    Still facing the same problem. Has any one faced this problem? Please suggest.
    Regards,
    Faisal

    HI Faisal,
    This note(1897975) you have to implement in Plug-in System, try to check the same once and let me know if it resolves our issue.
    Regards,
    Neeraj Agarwal

  • The approver does not show in the approval preview after saving sh. cart

    Hi ,
    I would appreciate if anyone can reply me for fixing the problem.
    Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.
    Details of the problem:
    The following steps specify the problem in detail , it is applicable for both the workflows “WS10000060 – Auto approval and WS10000276- 1 level spending limit approval.”
    1.     Shopping created
    2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
    3.     Shopping cart is saved.
    4.     After saving , Check status transaction shows the shopping cart in status “awaiting approval”
    5.     The section approval shows “ No workflow started , application error occurred”
    6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
    7.     The work item container does not show any agents
    I would appreciate it anyone can reply as to how to fix it ASAP.
    Best Regards
    Pawan

    Hi Disha,
    I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
    In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
    SLG1 shows all green entries and there are no entries in RZ20.
    I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
    What should I do.. , anything am I missing .
    Thanks and Best Regards
    Pawan

  • BRIDGE does not show every PNG with preview

    Hello there,
    my CS4-BRIGDE doesn't show my PNGs with a preview thumbnail.
    I use to export them from Illustrator files but even if I open them in Fireworks or Photoshop to save them again, there is no preview on my PNGs. The explorer preview shows all PNGs only Bridge does not!
    I have some PNG from an unknown source (too long ago to remember) which do have a preview!
    Can anyone please! help?
    greg

    For a quicker response, I reccommend that you post your query on the Bridge forum: http://forums.adobe.com/community/bridge

  • Presets does not show anymore the live preview

    The first three times I used Aperture 3, the "Presets" showed the live preview. Example : Presets/Color/Cross Process 1 showed a small image where I could appreciate before clicking. Now the live preview image is not shown anymore. I uninstalled Aperture completely and after reinstalling, it worked for a day or two. After that, impossible to get back the live preview. I'm working on the newest MacBookPro 17'' with 8GB Ram. I also installed the latest update of Aperture.
    Can somebody help me? Thanks.

    I had a glitch were all the adjustments and histogram appeared to be active at the same time as the quick preview was on. The sliders moved but no adjustment was applied. Maybe a similar problem? Allan

  • When I "enhance" a photo, it does not show up in slideshow, it is just black

    When I "enhance" a photo, it does not show up in slideshow, it is just black.  I am using Iphoto.  I also can't email these "enhanced" photos.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

    Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

    You can do this with "composition" widgets.

  • Muse 7.0 plus Chrome: browser does not show images full browser width

    Hi there,
    I have a serious problem with the latest Muse version: the images which I use as parallax-masks for the background won't work with Chrome, though Safari and Firefox are not showing any problems. The issue: Chrome does either not scale the images to 100% browser-width or does not show them at all, or even shows the images cut into narrow stripes. This problem did not show in the previous version of Muse.
    Of course I already restarted application and computer. System: Mac OSX Mavericks.
    What to do now? The presentation with the client is very soon and this bug makes me very nervous.
    Best,
    bartl

    The problem bartl encountered and reported was fixed by the 7.1 release (November 21st). The problem you're describing sounds different.
    As of yet, I'm unable to reproduce what you're describing. The URL you've provided views the same in all the browsers I've tried, Chrome (32.0.1700.77) and non-Chrome, Mac and Windows.
    That said, looking at your master page I don't think you've created what you intended. At present there are two full screen slideshows on your A-master. On contains no images and the other contains a single image. Both are set to have thumbnails and the thumbnails container is off the right side of the page.
    If you look at your "Master Slideshow" layer in the Layers panel, you'll see the two slideshows. I think you'll want to delete one of them and, given your design, turn off thumbnails for the remaining one.
    Also, if you don't plan to have multiple images in the full screen slideshow, you'd be better off using a background fill image rather than the slideshow widget.
    I remain a bit puzzled how/why you're seeing different behavior in your instance of Chrome. Have you cleared your browser cache?
    On an unrelated note, if you set the page fill and stroke to none and set the browser fill to the most common color from the garage door image, it will avoid the momentary appearance of a white page on a grey background when your home page first loads. Instead the site visitor would see a blank page that's the most common color from the slideshow image, until that image loads.

  • I think I need to re install Encore off my discs. When I ask Premier Pro CS5 to send my project to Encore, Encore opens but does not receive my movie sequence. How do I re install Encore only without upsetting my movie?

    Hello. I have the Premier Pro CS5 suite on Windows. Can you advise me how to re install Encore off my discs without affecting any of my movie in Premier Pro please?
    I ask Pro to send the movie sequence through Dynamic Link into Encore so that I can burn the sequence to a disc.
    Encore does open but the sequence does not arrive from Pro.
    Last night the sequence did arrive into Encore but took forever to transcribe and I eventually cancelled the process as it appeared to get stuck and did not quite get to writing to disc.
    This morning the sequence does not even arrive into Encore.
    Very frustrating when I have a 4hr movie that I want to write to Bluray so I have now created 4 separate sequences and want to try writing them onto DVD in 1hr chapters.
    Hope someone can help me with this. Cheers. Janice

    Hello Ann. Thank you for your help. I have re installed EN and I have now
    sent parts of my movie to AME. I have then tried several different methods
    of getting the encoded clips into Encore successfully. Once in the Project
    panel and the Timeline, the movie does not show up in the Monitor panel
    above, so I have proceeded to build and write to a disc. I've tried a
    number of options but always end up with EN 'not responding' and having to
    close the program down.
    Something else is that I do get a message whilst in Premiere Pro that there
    is an update available for AME, however, when I look online I do not see an
    update for CS5, although there are 2 updates for CS6. Can you suggest what
    I could do please? The Encore problem is the one that concerns me the most
    as I am not able to record my movie.
    Looking forward to your reply.
    Kind regards.
    Janice

  • FF5 does not show images that are 'moved permanently' (http response 301)

    Our web app shows maps from OpenStreetmap. The webapp is secure, that is, is uses HTTPS. Now, IE complains horribly when the web page tries to load <img> via HTTP, because it's mixed content that that is considered baad.
    So our webapp serves the images by responding via HTTPS with a 301 (moved permanently) to the real OpenStreetmap URL (with is HTTP). That fools IE to not complain.
    Now, Firefox 5 suddenly does not show the map images AT ALL. This has worked beautifully with previous version (and all other browsers).
    What's wrong?

    I fixed the problem.  (YAY!)
    It was the way I embedded the files -- the Dreamweaver default does not work properly so I used the embed from this generator: http://www.bobbyvandersluis.com/swfobject/generator/index.html#alternativeContentHelp which now lets my navbar and swfobjects load properly.  I also made sure that my slideshow (loader.swf) was set with wmode = opaque while the navbar is set to wmode = transparent.  The div for the nav bar has z-index set to 5 while the div for the slideshow has z-index set to 1.  Both have absolute positioning.  I hope this helps anyone in the future that has trouble with overlaying flash (.swf) files.
    Thanks for your reply and trying to help me solve this issue!

  • When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    Other than that, what version of iPhoto do you have? Assuming 09 or later try
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD
    P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

  • CLI does not show on secondary line in cisco 9971 through MGCP CO line

    Hi,
    There's an issue that CLI does not show on secondary line in cisco 9971 through MGCP CO line. Only the calls that are getting to the first line shows CLI.
    It shows as "unknown number" when it's getting a call to the secondary line ( MGCP CO line).
    Has anyone faced this issue?
    Please help to resolve.
    Thanks & Regards,
    Achintha

    Don't use TimeLines.  Log-in to the Adobe Exchange with your
    Widget Browser  ~ http://labs.adobe.com/technologies/widgetbrowser/
    jQuery & Ajax Slideshows from Adobe Exchange:
        * jQuery Cycle Widget
        * Lightbox Gallery Widget
        * Spry Content Slideshow
        * Spry Image Slideshow
    As to your layout problems, we still need a link to your page. 
    Free host for testing: http://www.000webhost.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • I have an apple iphone 4 that I want to download audio books from my library onto it.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    I have an apple iphone 4 that I want to download audio books from my library onto.  I cannot figure out how to do that.  The iphone does not show up on my mac laptop as a connected device.  Does this kind of download have to run through itunes?  Thanks

    Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Why when using Adobe Bridge,  I apply a star rating,  the rating does not show up in Photoshop Elements? [tags]

    Why when using Adobe Bridge,  I apply a star rating,   the rating does not show up in Photoshop Elements.  I use Elements as my organizer and Bridge to view as it is much more user friendly.  Anyone any solutions??

    Most likely you have set the wrong file as the external editor. You don't want the obvious one; that's just a link to the welcome screen. Go back and choose this one, which is hidden away inside the folder Support Files:

Maybe you are looking for