Encore 2.0 doesn't restart

When running Encore DVD 2.0 I exit the program. After exiting, the application disappeared from my desktop so I assumed the application actually terminated as it should. Later I would try to restart Encore. After double clicking the shortcut for Encore I saw a brief hourglass and that was it....Encore wouldn't restart. Finally I looked in the process list and noticed the Adobe Encore DVD.exe process was still running and consuming 50% of my CPU. If I highlight the process and click end process it stops the process and releases the CPU. After that a restart of Encore works.
As a double check I rebooted started Encore and exited while watching the precesses list. Immediately the Adobe Encore DVD.exe process began to consume 50% of CPU. I let it run for 30 minutes the process never ended. I was forced to highlight the process and click end process to get the application to properly terminate. I also tried to reinstall and "repair" the installation all with the same results.
This does not occur with Encore 1.0 or 1.5. I would say it's definitely a bug in 2.0
If there is a fix, please advise.
Thanks
Bob
XP Pro SP2
2 GB RAM
300 GB SATA dedicated AV hard drive
Matrox RTX 100 Xtreme capture card
Matrox Parhelia 256 MB dual monitor video card

I have a similar problem. If I start up Encore and then exit (with or without any changes) I cannot restart Encore without rebooting the computer. However, unlike BB, when I check the task manager no Adobe processes are running. One footnote to add: I am now running the full Production suite yet I'm pretty sure this didn't happen with the tryout version.
Have tried re-installing but still the same problem.
Simon

Similar Messages

  • Login manager doesn't restart

    Hi,
    At the end of my session the login manager (kdm) doesn't restart any more. It starts only when I digit "reboot" or "shutdown -P"
    Thanks

    Ok and here is the kdm.log entry
    X Window System Version 7.1.1
    Release Date: 12 May 2006
    X Protocol Version 11, Revision 0, Release 7.1.1
    Build Operating System: UNKNOWN
    Current Operating System: Linux t23 2.6.18-ck #1 SMP PREEMPT Sun Nov 5 18:54:10 GMT 2006 i686
    Build Date: 19 September 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 8 23:52:10 2006
    (==) Using config file: "/etc/X11/xorg.conf"
    [10f] 320 x 200, 70Hz
    [112] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
    [115] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
    [118] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz
    [11b] 1280 x 1024, 60Hz, 75Hz, 85Hz
    [11e] 640 x 400, 70Hz
    [124] 1600 x 1200, 60Hz, 75Hz, 85Hz
    [134] 320 x 240, 72Hz
    [13e] 1400 x 1050, 60Hz, 75Hz
    [144] 400 x 300, 72Hz
    [154] 512 x 384, 70Hz
    [175] 720 x 480, 75Hz
    [17f] 720 x 576, 75Hz
    (EE) SAVAGE(0): DRI isn't enabled
    (EE) AIGLX: DRI module not loaded
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    QSettings: error creating /tmp/1281107925/.qt
    QSettings: failed to open file '/tmp/1281107925/.qt/qt_plugins_3.3rc'
    QSettings::sync: filename is null/empty
    QSettings: error creating /tmp/1281107925/.qt
    QSettings: failed to open file '/tmp/1281107925/.qt/qt_plugins_3.3rc'
    QSettings::sync: filename is null/empty
    QSettings: error creating /tmp/1281107925/.qt
    QSettings: failed to open file '/tmp/1281107925/.qt/qt_plugins_3.3rc'
    QSettings::sync: filename is null/empty
    Link points to "/var/tmp/kdecache-root"
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    AUDIT: Wed Nov 8 23:55:49 2006: 3047 X: client 12 rejected from local host
    AUDIT: Wed Nov 8 23:57:11 2006: 3047 X: client 12 rejected from local host
    SetGrabKeysState - enabled
    AUDIT: Thu Nov 9 00:14:24 2006: 3047 X: client 13 rejected from local host
    SetClientVersion: 0 9
    SetGrabKeysState - disabled
    SetGrabKeysState - enabled
    FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
    (EE) SAVAGE(0): DRI isn't enabled
    (EE) AIGLX: DRI module not loaded
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
    > Ignoring extra symbols
    Errors from xkbcomp are not fatal to the X server
    Backtrace:
    0: /usr/bin/X(xf86SigHandler+0x84) [0x80c4724]
    1: [0xb7fcf420]
    2: /usr/lib/xorg/modules/libramdac.so(xf86SetCursor+0x10b) [0xafa8f6eb]
    3: /usr/lib/xorg/modules/libramdac.so [0xafa8ed53]
    4: /usr/bin/X(miPointerUpdate+0x164) [0x81127e4]
    5: /usr/bin/X [0x81128f9]
    6: /usr/bin/X [0x8128d3e]
    7: /usr/bin/X [0x814e7a3]
    8: /usr/bin/X(DefineInitialRootWindow+0x11e) [0x808fdae]
    9: /usr/bin/X(main+0x454) [0x806ec04]
    10: /lib/libc.so.6(__libc_start_main+0xd8) [0xb7df5808]
    11: /usr/bin/X(FontFileCompleteXLFD+0xa5) [0x806df61]
    Fatal server error:
    Caught signal 11. Server aborting
    AUDIT: Thu Nov 9 00:26:08 2006: 2916 X: client 18 rejected from local host
    FreeFontPath: FPE "/usr/share/fonts/misc/" refcount is 2, should be 1; fixing.
    Fatal server error is interesting. I don't know what is the problem. I even prepared new xorg.conf again.
    Any ideas?

  • My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

    My macbook pro doesn't restart or shut down from the apple menu. I run 10.7.5, any suggestions?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My iMac 21.5 shuts down and doesn't restart.  i need to unplug it for it to start again.  what is the issue?

    my iMac 21.5 shuts down and doesn't restart.  i need to unplug it for it to start again.  what is the issue?

    Reset the SMC (System Management Controller), click here, read the notes and follow the directions.

  • My mac mini is noisy and doesn't restart

    My mac mini is making a lot of noise, and it doesn't restart (the screen is gray with the apple in the middle and it turns).
    What can it be as problem ? What can I do ?
    Thanks

    Here's a great link to help you troubleshoot why your mini is having startup problems: http://www.thexlab.com/faqs/startupitems.html

  • Upgrading an ACS deployment from 5.3 to 5.5, runtime service doesn't restart.

    Hello at all.
    I'm restoring a 5.3 backup to a new ACS 5.5 patch 3.
    Restore procedure works fine but when I restart the server service runtime doesn't restart.
    acsuno/admin# sh app stat acs
    ACS role: PRIMARY
    Process 'database'                  running
    Process 'management'                running
    Process 'runtime'                   not monitored
    Process 'ntpd'                      running
    Process 'view-database'             running
    Process 'view-jobmanager'           running
    Process 'view-alertmanager'         running
    Process 'view-collector'            running
    Process 'view-logprocessor'         running
    This is the end of debug log file...
    Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rt_daemon init failed,RTDaemon.cpp:325
    Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,ConfigNotificationFlow::waitStart: unable to load configuration: fatal error,RTDaemon.cpp:326
    Daemon,13/06/2014,18:52:37:455,ERROR,3086411504,rc = 4,RTDaemon.cpp:327
    Any ideas?
    Many thanks.
    Regards.
    Andrea

    Hi,
    Manually restart the runtime process from the CLI and rebooting the appliance resolves this issue.
    In order to restart the runtime processes manually, issue these commands from the ACS CLI
    - acs stop runtime
    - acs start runtime

  • I have an iphone3gs which needs itunes 4.1 otherwise it doesn't restart. But 4.1 is compatible with windows  64 bits version. How am I gonna solve this? There are no on line solutions

    I have an iphone 3gs which needs itunes 4.1. Otherwise it doesn't restart.

    I have an iphone 3gs which needs itunes 4.1. Otherwise it doesn't restart.

  • Mac intel doesn't restart ???????

    Did I made something wrong ? since I bought it, it doesn't restart.
    Today I was updating the security stuff from the mac software updating, and after It asked me for restart my computer, cliked on the restart button. It closed all the applications, and every thing at the desktop, and after all this didn't restart.
    I am a bit worried is my computer damaged ?????

    Hi,
    At what point does your Mac stop when booting up? Have you added any Ram?
    You can try to unplug everthing for a minute or 2, plug in power supply and hit power button and hope for the best, this reset SMC...
    You can reset PRAM, read and follow instructions carefully...
    Rick
    iMac G5 iSight 20" - 30G iPOD in Slimming Black -   Mac OS X (10.4.7)   - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

  • Airport extreme doesn't restart, solid amber light

    Hi!
    I tried to update my airport extreme's firmware and now it doesn't restart. The LED shows a solid amber light, and airport utility doesn't find it.
    What can I do?
    Thank you very much

    alzheimer78 wrote:
    Hi!
    I tried to update my airport extreme's firmware and now it doesn't restart. The LED shows a solid amber light, and airport utility doesn't find it.
    What can I do?
    Thank you very much
    hola alzheimer78 !
    try a +factory restore+ by pulling the unit from power and inserting a paperclip or pointy object into the reset button at the back of the extreme. keep the button pressed while you put the plug back into the outlet. wait until the extreme starts flashing amber rapidly (5-10 seconds) then release the button.
    does that work ?

  • My iphone doesn't restart

    ~ today my Iphone stopped working suddenly without reason. it doesn't restart with any metod i tried ...any help please?

    may be depleted battery, plug in for at least 5-10 minutes.

  • J2 SE 1.3.1_12 Installation problem (doesn't restart after installation)

    Hello there,
    I tried installing Java2 Standard Edition v1.3.1_12 for about 4 times on Windows Professional 2000. Everytime it installes successfully ( I mean, I get the installation last screen saying installation complete and click on the "Finish" button), but it doesn't restart the maching after clicking on the Finish Button. In a way it is an incomplete installation as it wouldn't update the registery.
    I downloaded the the file second time and installed but the same problem persist.
    Can someone help me out please.
    Thanks.

    reboot your compter ... (what's so hard about that?)

  • Transport Service Stops once a week & doesn't restart- causing mailflow issue

    Hi All
    I have a customer with Exchange Server 2013 Standard SP1. I have recently migrated them from Exchange 2010.
    Single Server for All roles. VM has Trend Micro office scan agent installed. Server resource is adequate, Separate drive holds logs, exchange database.
    The only Error / warnings I can find from Event logs are below
    1) Event ID - 6002, Ping of Mailbox database timed out after 00.00.00 minutes
    2) Event ID- 6027, MS Filtering failed to contact primary update path
    3) Event ID- 16028, A lot of this event.
    I have done a bit of searching and reading and seems like all the above could be ignored,
    However my main concern is, I have noticed over the last couple of week that once a week Exchange Transport Service stops and fails to restart itself causing mail flow until staff tells me none is receiving email then I manually start the service.
    Has someone ran it to something similar or can offer a solution? Perhaps a script that runs and checks transport service and if service failure detected then wait 1 minute to force restart it?
    Thank you in advance.  
    MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

    I have gone through several troubleshooting as below
    1) Made sure disabled Anti-malware agent in exchange
    2) Made sure frontend connectors only have one 25 port as described in this article -
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2013/ManagementAdministration/exchange-server-2013-sp1-transport-service-stops-and-does-not-restart.html
    3) Made sure to exclude folders that hold mailbox database from scanning by trend Micro officescan agent
    4) Made sure the DNS is pointing currently and doesn't have any bindings to 127. address
    5) Do not have any custom receive connector, the only modification I did to the default Hum transport and Default frontendTransport connector is that I have enabled anonymous user for both of this connector.
    I am in the process of creating a powershell script with the help of (powershell boy) which does a service check via task scheduler and if found service not running then waits for 2 minutes and force
    re-starts the transport service. If this work, it will be a band aid solution, however wondering if someone has found a permanent fix yet?
    MCITP, MCSA, MCSE,VCP - Consultant, Solution Design, Implementation

  • Encore 2.0 doesn´t start after using QT 7.1

    I found out that i can´t start my Encore dvd 2.0 after I used QuickTime player ( 7.1). I have to reboot to be able to start it again. It doesn´t give any respons at all. Anyone had the similar problem?
    Mattias

    I though it was QT doing it but now I realized that I can´t start Encore again after I had closed it. I have to reboot to start the program again. Weird.

  • Time Machine doesn't restart after restore

    Hello everyone,
    I have a 2010 i7 MacBook Pro and just upgraded from Snow Leopard to Yosemite only to realise that it doesn't recognise my version of Protools. I decided then  to use my Backup which I have done just before upgrading (first and only backup I ever did, using a usb plugged external hard drive) and use time machine to restore my operative system back to Snow Leopard.
    The restore goes fine until it gets stuck when trying to restart. It stays on the 'Restarting your computer' screen and nothing else happens. I tried restarting manually but it doesn't respond and also forcing it to quit.  Once I do this, however, it just begins the TM restoring process all over again (select backup drive, the actual restore) only to get stuck again at the same point.
    I've tired this process several times now and nothing happens. I'm worried because it doesn't give me the option to continue in YOsemite either, it just always goes back to the same screen where I can only chose between restarting again and disk utklity. I have read other threads but they explain mostly what to do when you cant get it to work after restarting, mine doesn't even begin to restart!!
    Help please!! Thank you!

    sethg77 wrote:
    However, I haven't successfully backed up since the crash. Every time I attempt a back up I get an error message saying" Unable to complete backup. An error occurred while copying files to the backup volume".
    See #C3 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    Also, now it wants to back up anywhere between 75GB to 110 GB, even though little has changed since I restored it.
    Yes, that's normal. Everything you just put on the disk is considered as being new +to that disk+ and will be backed-up: http://support.apple.com/kb/TS1338

  • BPEL process instance doesn't restart execution after BPEL server restart

    I am using Oracle BPEL server 10.1.2 on Windows with the Oracle lite 10G dehydration datastore.
    I have a one BPEL process (proc1) that invokes another BPEL process (proc2) synchronously. proc1 also invokes proc3 (also a BPEL process, but probably doesn't matter) synchronoulsy in parallel with proc2.
    proc2 has a wait of ~30seconds in it. As soon as proc1 invokes proc2, I shutdown BPEL. Now, when I restart the BPEL server, proc2 instance finishes its execution. But, I don't see instances of proc1 and proc3 in the BPEL console.
    Here are my questions:
    1. If proc1 invokes proc2 and proc3 in parallel, shouldn't I see instances of proc2 and proc3 at the same time? I only see proc2 not even proc1.
    2. Why doesn't proc1 resume its execution after BPEL server is restarted?
    Any pointers appreciated.

    1. If proc1 invokes proc2 and proc3 in parallel, shouldn't I see instances of proc2 and proc3 at the same time? I only see proc2 not even proc1.
    Please read this thread:
    ParallelFlows + sync flow

Maybe you are looking for