Encore 2.0 motion menus not previewing?

I have been having some trouble with motion menus...I got a copy of Encore 2.0 several years ago and it worked fine then. I recently had a need for it again so I re-installed it and started a project.
My problem is that even with the video transcoded, added to the menu, and the motion menus rendered, it doesn't show up in the preview. I can hear the audio, but it doesn't show the video. After tinkering with this for a little bit I went ahead and burned a disc, thinking that my problem was just a preview issue. The finished disc also doesn't work. You hear the audio and the buttons and timelines work fine, but no motion menus.
I found a discussion on here a while back about changing registry entries (for when Encore gets hung up on importing) and I had a similar issue. I tried that and it worked. I wondered if something similar may be causing the motion menus not to work.
I should mention that I tried re-installing Encore with no such luck.
Any ideas?

Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
Thanks again.
Date: Fri, 17 Feb 2012 08:57:30 -0700
From: [email protected]
To: [email protected]
Subject: Encore 2.0 motion menus not previewing?
Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
Here is another recent discussion... may help (or, of course, may not)
http://forums.adobe.com/thread/962166
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Encore 2 MOTION MENUs not looping more than 2x

Gidday Neil & techies:
I have created a wedding DVD. Burnt & both original Motion Menus looped forever. Did some alts, re-burnt DVD ... Now, one of the Motion Menus loops 1-2 times, then randomly plays one of the movies.
(Definitely set to 'loop forever'.) I have re-re-rendered the motion menus, etc. etc. Still no luck.
Hmmmm...

Awesome. I checked out the other thread, and I didn't find the solution directly, but somewhere they mentioned "layers" and I realized how ignorant I was. The background layer was turned on by default, so I couldn't see the video that was playing behind it. I just toggled it off and presto! The menu works.
Thanks again.
Date: Fri, 17 Feb 2012 08:57:30 -0700
From: [email protected]
To: [email protected]
Subject: Encore 2.0 motion menus not previewing?
Re: Encore 2.0 motion menus not previewing? created by John T Smith in Encore - View the full discussion
Here is another recent discussion... may help (or, of course, may not)
http://forums.adobe.com/thread/962166
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4213135#4213135
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4213135#4213135. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Encore by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Encore cs5 motion menus not working when build to flash

Hello my question is this, I have created a dvd in encore cs5. I have created motion menus in AE.
Everything works great when I build to DVD. However when I export to flash my animated menu is working but the buttons (play move, chapter select , extras) do not show up until the animation is complete. Is this a simple fix? or should I make the menus static?

Hmm... what version of the Flash Player are you testing with
(full version, including release number)? You can find out which
version you're using here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507
-Robert

Motion Menus not playing properley

I'm creating a dvd with quite a few submenus. I've chosen the 5.0 theme sliding panes where 7 photos slide across the screen. Although some of the menus work properley the majority just load up on the last two photos and do no show the other photos moving across the screen. I was wondering how to fix this. I have checked in my project info that my motion menus do not exceed the limit (it reads 6.38 of 15.00 and is green.)
Lara

Leave your current project alone for a while. And open a new project with less content (3 mins. or less) but use the very same menu and add different images.
Do you still get the same results with that particular menu selection or not?
Post back and let us know what you have tried so far.

Motion menus not working after Leopard

I see that other people are having problems with motion menu templates after installing Leopard. I tried trashing my prefs and that didn't work. Has anyone else found a solution to the issue. Thanks!

What problem are other people having? My iSight also failed, but it's the strangest problem I've ever had with my Mac. It will turn on and stay on when it should, but the image is dark to start out with and fades to black.
Other people are mentioning systems not recognizing the camera at all. Is this the case across the board or is anyone experiencing what I mentioned here?

Encore CS4 crash on render motion menus

When I first installed Encore CS4 (Windows 64-bit computer), it crashed every time I rendered my motion menus. I found a thread on this forum from 2009 that discussed this issue, and installed the Roxio patch (or whatever it was called)--that was the recommended solution. After that, render motion menus worked fine so I thought the problem was fixed.
But over the past few weeks, it has started happening again--intermittently at first. But today, every time I go to render a motion menu--with different PSD and MPEG-2 files--it crashes every single time. I am beyond frustrated.
What should I do? Since Encore has rendered motion menus fine for the past few months for me, I'm doubting that it's the Roxio issue. I read somewhere that profiles can get corrupted and can be reset. But I have no idea how to do that. So before I start screwing around with stuff, I figured I would come here and see if anyone has any ideas for me.
Thanks for your help.

Here's what I might try.
Start new project (probably after restarting my machine for good measure).
Open a library menu with motion.
Render. Does that work?
If so, I'd look a bit harder at the motion assets. Try an old project that worked, and bring those assets into a new project for motion.
I'd try reinstallng the roxio patch, if it fixed this before. (I don't think was what it was intended to fix, but I wouldn't argue.)
If none of that works, I'd consider a repair install. See number 1 here:
http://kb2.adobe.com/cps/408/kb408826.html

Blu-ray Motion Menus in Encore CS4

Okay. Just upgraded to Encore CS4 from CS3. Few nice changes.
Have crashed about 10 times (in one hour) doing simple things like, assigning folders, playing video, adding menus. Can anyone say maintenance release???
Here's a question...
WHY CAN'T I SEE THE VIDEO I HAVE ASSIGNED TO A MENU WHEN I SIMULATE?
This was working in CS3 now it's NOT in CS4. Tried on two different machines, one with ATI card an the other with nVidia!
ADOBE... are you there???

That's right. CS4 simply behaves different to CS3!
I have never had to render out a menu to preview it. We only create motion menus for Blu-ray and only use highlight layers from Photoshop. In CS3, when you right clicked on a menu in Encore and clicked "simulate from here", you would see your highlight layers over the video immediately.
NOW, with CS4, you must render out the menu after clicking "simulate from here" to see it. VERY annoying but I'm sure Adobe did this for a good reason.
Pop-up menus I am glad to report actually work! We haven't figured out how to create motion pop-up menus yet but I suspect this is not available yet in Encore.
If anyone knows any differently, I'd love to hear it.
What's fixed and I'm SO GLAD is that during simulation, the SKIP FORWARD chapter button WORKS!!! In CS3, you had to pause the video and then could skip forward. Now, like any other normal program, while the video is playing, you can skip forward.
I would thank Adobe for fixing this but, let's face it, this just should have worked in CS3!
Regards,
Darren

Photoshop file error when rendering motion menus in Encore CS4

Hello
I hope someone can help me please?
I've successfully (after 3 attempts) managed to import my PP project into Encore, created the menus etc from the presets that come with Encore (Wedding Garden menu). When it comes to rendering the motion menus with the animated buttons option checked, after a couple of seconds it comes up with a Runtime C error - photoshop file (508) i think it is and it crashes.
It's a new system CS4, Windows 7 64bit, 2x2.40ghz quad core processor, 24gb ram, nvidfia 285 2gb graphics card - do you need to know anything else?
I've rendered the motion menus without ticking the animate buttons option on the 3 menus I have (it's a wedding dvd - main menu and 2 sub menus with animated thumbnails) and its worked. This is ok as a workaround but I'd really like to be able to have the menu thumbnails animated.
Many thanks
Rachel

Thanks v much i'll certainly give that a try -
if it helps - I managed to make a note of the error message after I had sent my initial posting on this topic.
[..\Port\PhotoshopObject.cpp-568]
Thanks again for posting a reply
Rachel

What is the easiest ways to create motion menus in Encore CS5 w/ After Effects CS5

Hello,
What is the easiest way to create motion Menus in Encore CS5? I'm creating a motion menu in after effects CS5 and will import as a menu in Encore, but I want to keep the animation, while the buttons will navigate you to the appropriate timelines. I want to keep the animation going throughout the duration of the menu?
Thanks,

Thanks Stan. Big Help
Date: Fri, 10 Jun 2011 20:07:23 -0600
From: [email protected]
To: [email protected]
Subject: What is the easiest ways to create motion menus in Encore CS5 w/ After Effects CS5
The first link is Encore CS5 help. It is a good beginning. I'm not sure if the tutorial it links to is the same as my second link. The AE help link below is also useful.
CS5 allows creation of buttons in AE, but for plain navigation options, I think it is just as easy to add in Encore or Photoshop.
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
Here's an adobe tutorial on using AE for EN menus:
http://www.adobe.com/designcenter/video_workshop/?id=vid0258
From the After Effects help:
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7e45 a.html
>

File Not Found when rendering motion menus

I'm rendering motion menus in CS4. Most of them are successfully rendered but two haven't rendered yet: "FAQ A 13" and "FAQ A 14". When the rendering process gets about 3/4 of the way through FAQ A 13, I get "File Not Found" error.
There is no indication in the error box of WHICH file was not found (thanks Adobe). It doesn't seem like it can be 13, since it already successfully found 3/4 of the file. But I'd be surprised if it was 14 because 13 should have taken another 15-20 seconds of rendering before 14 was attempted.
Anyone experienced something like this and have some insight?
Thanks

Solved it (sort of): I chose a different transcode preset to force a re-transcode of the video background. Re-rendering motion menus was successful after that.
Strange though that the transcoded file was corrupted/missing (it was fresh as I had imported the asset this session).
Also strange that Encore would transcode background assets to mpeg2 before rendering the motion menu; wouldn't it have to recompress to mpeg2 after compositing the additional elements, and lose quality?

Rendering Motion Menus in Encore - Photoshop File Error -1

I've looked everywhere for the answer to this.... I cannot render my motion menus in Encore. I recently upgraded to OS Maverick (fresh install) on a brand new SSD drive. I'm using CS5.5.
Help!!!
(To go in more detail, I did a screencast below)

I did not watch the whole video.
Both (photoshop -1 and the mega-content ROM) are known issues with Mavericks. We are not getting enough feedback to know how well, or not, Encore is working on Mavericks.
http://forums.adobe.com/message/5950080#5950080
Photoshop -1 issue:
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.
Edit: http://forums.adobe.com/message/5810884#5810884
See post 12 and several following where we are looking for workarounds to the error.
http://forums.adobe.com/message/5861618#5861618
For bluray projects, a large amount of BD-ROM is shown, and may slow startup.
A workaround is to add a small amount of ROM content.

Encore stops when rendering motion menus

I have a pretty consistent problem when rendering motion menus/project and I don't know how to fix it. Can anyone help?
I've just started to use Encore2, having switched from DVD Workshop 2.
I've got a wedding to author and I've used the useful 'Create Chapter Index' function that automatically creates sub menus. This has worked fine UNTIL I render the motion menus.
There are four menus: 1 x Main Menu, and 3 x Sub Menus.
If I render number 1 sub menu it's fine. It renders all 375 frames (why are there always 375 frames?).
The number 2 sub menu also renders properly.
When I get to number 3 sub menu, it always stops at frame 294 and Encore hangs! Why should this be?
I tried creating another project using the same mpeg file (4.12 GB) but with different menus and the same thing happens!
Any ideas?
John

> why are there always 375 frames?
Assuming PAL (at 25fps) that would be a 15 second motion menu.
> always stops at frame 294 and Encore hangs!
Just guessing: If you used motion thumbnails for chapters or timelines, there could be a "glitch" (corruption) 294 frames into the chapter or timeline the thumbnail video is made from.

Audio on Menus not playing

Hi all,
I wonder if anyone can help me.
Using Encore on CS4, I created a project with three motion menus. The text was adapted from an Adobe template and the 'motion'' elements (video and audio) were created in Premiere, saved as an MPEG, imported into Encore as an asset and then alt-dragged to the menus. All of this works well. I then preview and build the motion menus with the preview buttion and everything plays well, the video and the audio (though it would be nice to have some voume control - but that's another story) are great and the menu structure (1st play menu and two subs) play fine. I then build the DVD. Firstly burned directly to DVD, the on subsequent tries as an image and as a folder. On all of them there is no audio on the menus. The timelines that the menus que are fine, the audio works but not on the menus.
In frustration I created a flash file of the same project, and the audio was great. All there. I then went and analysed the DVD folder I created earlier and DVD Shrink found the menus and even found found associated audio as LPCM2-ch but alas, even using this program to compile an .ISO nothing improved.
Any ideas?
Thanks

......... I also do not want them rushing for the remote, to mute loud Menu Audio, only to have to then turn up the Volume, when the DVD plays. I like to "ease" the user into things. I find too many commercial DVD's, where the Menu Audio Volume is about +6dB above the other Audio and hate that. It does get my attention, but in a very bad way. It also scares my Bulldogs!
Good luck,
Hunt
Oh, dear me yes.
The way I have found for menu audio - if you really must have it - is to halve the level from what you think is comfortable, and then set it to loop 20 or 30 times over - you would be surprised at hiw quickly this becomes very annoying.......and now place yourself in your customers shoes.
@ the OP.
As Jeff says, please retry with Dolby DIgital or LPCM, LPCM definitely if you are looping on a tight loop.
MPEG audio is not your friend.

Blu-Ray Motion menus don't work!

Hey Gang,
I posted this issue before but since I received a very limited response, I'm hoping that someone will respond to this simplier issue.
I created a empty blu-ray project. I placed the Encore Crib Motion Menu HD into the project. The menu provided NO motion even after rendering.
I then created a standard DVD project and performed the exact same steps. The motion menu now works.
I'm running a system with Vista 32 loaded & CS3.
Anyone get the motion menus to work in Blu-Ray?
Please let me know. It will take a minute to duplicate my project.
BTW, I have tried this on two seperate system yielding the same results.
Thanks!
Steve

That's right. CS4 simply behaves different to CS3!
I have never had to render out a menu to preview it. We only create motion menus for Blu-ray and only use highlight layers from Photoshop. In CS3, when you right clicked on a menu in Encore and clicked "simulate from here", you would see your highlight layers over the video immediately.
NOW, with CS4, you must render out the menu after clicking "simulate from here" to see it. VERY annoying but I'm sure Adobe did this for a good reason.
Pop-up menus I am glad to report actually work! We haven't figured out how to create motion pop-up menus yet but I suspect this is not available yet in Encore.
If anyone knows any differently, I'd love to hear it.
What's fixed and I'm SO GLAD is that during simulation, the SKIP FORWARD chapter button WORKS!!! In CS3, you had to pause the video and then could skip forward. Now, like any other normal program, while the video is playing, you can skip forward.
I would thank Adobe for fixing this but, let's face it, this just should have worked in CS3!
Regards,
Darren

CS4 Motion Menus

I don't know if anyone else has experienced this, but in CS4 (Vista 64bit) it take around an hour to render 7 motion menus that run for 53secs. If I make the exact same project in CS3 (XP Pro 32bit) they take 3 minutes! (Not direct from timeline - but from m2v and wav so the commonality is the same. Booting is from different drives in the same computer.)
Has anyone else had this issue - and more importantly - what's the solution? I'm guessing it's simple but I can't find it, and it's a pain having to keep re-booting the compuer in order to swap between the two every time I make a DVD.
Thanks
Mike

That's right. CS4 simply behaves different to CS3!
I have never had to render out a menu to preview it. We only create motion menus for Blu-ray and only use highlight layers from Photoshop. In CS3, when you right clicked on a menu in Encore and clicked "simulate from here", you would see your highlight layers over the video immediately.
NOW, with CS4, you must render out the menu after clicking "simulate from here" to see it. VERY annoying but I'm sure Adobe did this for a good reason.
Pop-up menus I am glad to report actually work! We haven't figured out how to create motion pop-up menus yet but I suspect this is not available yet in Encore.
If anyone knows any differently, I'd love to hear it.
What's fixed and I'm SO GLAD is that during simulation, the SKIP FORWARD chapter button WORKS!!! In CS3, you had to pause the video and then could skip forward. Now, like any other normal program, while the video is playing, you can skip forward.
I would thank Adobe for fixing this but, let's face it, this just should have worked in CS3!
Regards,
Darren

Encore 2.0 motion menus not previewing?

Similar Messages

Maybe you are looking for