Encore 2 and premiere pro 2

ok heres my issue i currently have a movie im working on in premiere pro 2.0 and i also have encore dvd 2. i want to put our final cut onto a dvd but i want to just export the timeline from premiere to encore. i dont want to have to export it as an avi or anything because i dont want to lose quality but i dont have the hd space at the moment to export the video uncompressed. is there a way to simply import my timeline from premiere into encore so i can use encore to create my dvd and menus rather than premiere?

Pedro,
It is not likely that you will lose any noticeable amount of quality when exporting your video as a
DV AVI file from Premiere.
But you can also export via the Adobe Media Encoder as a DVD compliant MPEG-2 file. In that case you would have to do a
"bit budget" first, to find the right settings that will make the duration of your video fit on a DVD. To assist you with the maths you can use one of these online calculators:
Bitrate Calculator
CustomFlix Bit Budget Calculator
Chris Linke Bit Budget Calculator
DVD-HQ Bitrate & GOP calculator

Similar Messages

Can't run (Media Encoder or Encore) and Premiere Pro

I finished a sequence, started up Media Encoder, then began editing a new sequence with Premierer.
The result was that after a while, Media Encoder "Not Responding".
I started Media Encoder again and this time I left the room to watch TV.
Media Encoder built the AVI file correctly.
Also Encore died when I tried to use Premiere at the same time.
Is that the rule with CS4 applications?

Harm
In EN once I click on the Build button to begin building a DVD it will take more than 30 minutes before the DVD comes out.
In the mean time I would like to fire up PR to start editing some other project.
If that is not something I can do then I can use my KVM switch to go to my old PC and produce artwork for the DVD case.
On another topic, I am in the process of making a BluRay DVD with Encore and when I clicked on the Preview button, instead of getting the neat little window that allows me to run a simulation of the DVD menu, I got a huge version of that menu that I could not manuver to get to the controller buttons.

Why do Encore CS5 and Premiere Pro CS5 have intermittant Sync issues?

I am noticing that Encore CS5 is "buggy" regarding sync issues with material edited by Womble and Corel Video Studio and I am guessing other programs as well?
In high definition I take AVCHD and edit in Corel Video Studio. If I leave the project as one single 42 minute segment and import this asset into Encore CS5, more often than not there are bad sync issues. To get around this I have to divide the 42 minute project into approximately 6 smaller ones- Each smaller asset ends where I had done the editing. Encore does not have any problems now with these 6 smaller assets.
In standard definition I edit in Womble and export as a MPEG2 Program. Sometimes Encore has a problem with the asset sync and sometimes it does not. (I am guessing about 20% of my assets end up with a problem). The same asset if brought into TMP or brought back into Womble does not have any sync issue. If brought into Premiere Pro CS5 it will exhibit the same behavior as Encore- If Encore has a sync problem, so will Premiere Pro. So to get around this I then have to go back to the original womble file and break it up into smaller pieces, at every edit point I cut and export the smaller file just after the end of the transition I applied. With a 6 hour project I may end up with dozens of small files to get around this problem- not very efficient.
Any ideas how to fix this or why Encore is so buggy? Would moving the original assets around in Womble- example taking something that was at the end of the timeline and then moving it to the beginning cause these issues for Encore? Or is there some other cause?
Encore CS5
Premiere Pro CS5
Windows 7 64 BIT
Quad core
2.4 GHZ clock speed
6GB memory
150 GB free space on drive
NVIDIA GEFORCE 8500 card

I've used VideoReDo in the past, which I believe has some similar strategies to Womble. I found when I tested streams, that there were often problems in the source streams, and that the fix was not 100 percent.
You may also find such files that are not 100 percent the same length video to audio.
In any event, the possibility other than Encore being buggy is that the files you are bringing in have problems when Encore tries to validate them. I'm not saying Encore doesn't have its problems, but clean mpeg files do not have sync issues ordinarily.
For some scenarios, I like your workflow (edit mpeg files in a frame accurate mpeg editor that is not retranscoding the whole file), but the results are often not consistent.
You don't say, and I would certainly look at, the nature of the audio stream you are using. I can not tell you what the problems are, but some streams just do not edit well, even though they may play back okay in some players, but still have issues in Encore and/or Premiere.

Do I need to re-install the WHOLE suite or can I just install just Encore and Premier Pro?????

I'm having a problem with my Encore and Premier Pro software. I have the Adobe Creative Suite Production Studio Premium CS5.1. Encore will not allow me to burn DVDS. I'm getting an 52102 error...won't allow it to finish writing...ALSO Premier Pro stops after capturing about 5 or 10 minutes of video and freezes...do I need to re-install my software??? and if I do... do I need to install the WHOLE suite or can I just install just Encore and Premier Pro????? I can burn and image file and it burns DVDs on my old Corel software so I know its not the burner or the DVDs I'm using..I am in the middle of a big project for kids at school really need to figure this out...not getting anywhere online. Can anyone help??? Has anyone had this problem? Hope I'm posting this to right place. THANKS!

I haven't had 52102 error, but seen it discussed. Here are a couple of links
Error = Sense Code 52102
Encore Hardware Error Sense Code 52102
Burning the iso file to the dvd may not be the same process as burning directly from Encore to dvd, and so may not exhibit the same error, if any. See response 1 in the first link.
As to the capture problem, look here
Troubleshoot digital video capture and playback | Adobe Premiere Pro

Can you import a slideshow from Encore into Premiere Pro 2.0?

I would like to combine video with a slide show - as well as use some of the functions in Premiere Pro in conjunction with a slideshow created in Encore.
Is it possible to import a slide show created in Encore into Premiere Pro?

Not really, no.
It might be possible to rip a DVD with your Encore slideshow, but I don't know how well PPro would handle it, and any audio would likely have to be converted to WAV.

I can't find the adobe dynamic link to encore in premiere pro...?

New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6. When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

Why i can't use dynamic link between After effects and Premiere Pro?

I have installed the Creative Cloud version of After effects and Premiere Pro (only them, no other software of the suite) but i still can´t link them with dynamic link. the option is in grey, and i can't even click on it.
Some help? please!

Ok, here goes some information about my hardware and software:
Allienware M14XR2
Intel Core i7-3610 QM CPU @ 2.30 GHz
RAM 8 GB
Windows 7 Home premium
NVIDIA GE force 650 M
I'm working in a Premiere Pro project using 1920x1080 .mov archives, and the project is in the same resolution.
In Premiere pro, when i go to Archive > Dynamic Link i only have the option of send it to Encore.
Is this information enough?
thanks

ENCORE AVEC PREMIERE PRO CC ???

Comment installer ENCORE avec PREMIERE PRO CC ,

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Why Do Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up.

Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Photoshop.exe
Application Version:          12.0.0.0
Application Timestamp:          4bbc5b10
Fault Module Name:          CoolType.dll
Fault Module Version:          5.7.82.7602
Fault Module Timestamp:          4b980c97
Exception Code:          c0000005
Exception Offset:          0000000000073a92
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          7c82
Additional Information 2:          7c821a1fc13b00b508d1bb6ee7ecaf44
Additional Information 3:          019c
Additional Information 4:          019cb6db15489631b8a43faf27e30830
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          Adobe Premiere Pro.exe
Application Version:          5.0.3.0
Application Timestamp:          4ce382d1
Fault Module Name:          CoolType.dll
Fault Module Version:          5.7.82.7449
Fault Module Timestamp:          4b7b1af3
Exception Code:          c0000005
Exception Offset:          00000000000739ea
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          889a
Additional Information 2:          889afed61eb6ddf1c1c3419adc6026b6
Additional Information 3:          8235
Additional Information 4:          823549a371dff618695395cc0a8514ee
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine. Any clues would be appreciated.

It does not necessarily mean a "corrupt" font, but can be a font that PrPro, and PS, cannot handle.
Though I have read that changes have been made, Open Office's DejaVu font would crash PrPro's Titler - every time. There are quite a few others. Font Dr, and similar utilities, will not see the font(s) as corrupt, but they are so poorly designed, that PrPro and PS cannot deal with them.
Though it can be a long, drawn out process, one can often zero in on the problem font(s), with a little work. This is accomplished by first defining the "System Fonts," and not touching them. Then, uninstall half of the remaining fonts, and testing PrPro and PS. If they launch fine, you know that somewhere in that list of fonts, the problem exists. If there is still a failure to launch, chances are good that the problem font(s) reside in that half, that are still installed. Note: because the problem still exists, does not guarantee that there are NOT problem fonts in that uninstalled group, so keep that in mind.
Repeat the proces, by uninstalling half of the remaining fonts and testing.
If necessary, repeat by removing half of the now remaining fonts and testing.
When you get to a point, where you are no longer getting problems, reinstall fonts, in small groups, testing in between. The smaller the groups, the easier it will be to pinpoint the problem font(s).
Keep notes on which fonts you are uninstalling and reinstalling, until you narrow it down to the problem font(s).
I would start by uninstalling any "free fonts," and then commercial, 3rd party fonts. A lot of free fonts are just poorly designed, and can cause issues, though they might work fine in some other programs.
I use a font manager, so that I only have ~ 350 fonts installed at one time, and then dynamically install fonts, as needed for Projects. That keeps my machine clean, and if, upon installation, I get a crash/hang, I know that at least one font in that Set is causing it. This helps, as my workstation has ~ 19,000 fonts on it, and some are free fonts, and many are from 3rd parties. Some are also very, very old.
Good luck,
Hunt
PS - one common cause for hangs on loading PrPro can be from VST's, used in Audio-editing. If you also have a lot of VST's, you could have two issues with two separate programs, i..e. PS hanging on fonts, and PrPro hanging on VST's. The results would be the same, but the causes could be different. That leads to even more work. For PrPro, also see this ARTICLE. If you get PS launching, but PrPro is still not functioning, drop by the PrPro Forum, and someone can help you there.

New pc for AE and Premiere Pro CS5

I'm in process of building a new PC.
I just started working with After Effects and Premiere Pro and my current PC is not really up to all the 1080 footage...
I currently own a E8400 with 8GB DDR2 Ram and some cheap motherboard (Intel DQ35JO) for reference.
I already own 2 x Samsung HD103SJ "Spinpoint" F3 1TB HDDs and a XFX 6850 Black Edition 1Gb which I plan to keep.
I have 2 options:
1)
Intel i5-2500K
Gigabyte P67A-UD3-B3
G.Skill F3-10666CL9Q-16GBXL Quad Kit 16GB (4x4GB) PC10600 DDR3
OCZ Vertex2 E 90GB 25/S300 SSD for system files (windows, program files, etc...)
I can get this for about 570 EUR / 820 USD
2)
Intel i7-980X ot i7-980 (is there a big difference between them performance wise?)
Gigabyte G1 Guerilla
3 x G.Skill F3-12800CL9D-8GBXL 8GB (2x4GB) PC12800 DDRS (for a total of 24GB or RAM)
OCZ Vertex3 120GB 25/S600 for system files (windows, program files, etc..)
I can get this for:
- with i7 980 - 1145 EUR / 1645 USD
- with i7 980X - 1485 EUR / 2133 USD
Will the 2nd option make that much of a difference in AE and Premiere Pro that is worth 2x-3x more money?
Thanks for opinions

Thanks for a fast reply.
Ok, let's say skip the overclocking for now (I used to overclock a ton back when it was Celeron 600 and similar CPU time , but I'm tottaly out of it now...not really on track with the overclocking of new CPUs...it used to be simple back in the days)
I'm ditching the 2500k option.
If I'm not overclocking, I could get a rather cheap motherboard
Asus Sabertooth X58
Intel i7 970/980/980X
16-24GB ram
GTX570
Combination of this is between 1150-1550 EUR / 1600-2250 USD depending on different choices.
Considering I'm not willing to overclock, is there to expect THAT much of a difference with 980X and 24GB ram against 970/980 (they're priced the same) with 16GB ram (considering it is 30% difference in price...will it be 30% faster in AE and Premiere Pro?)
I suppose this is my last question, don't want to bother you too much

I can only export in flash player, flash professional, and premiere pro

Hi,
I just got the CS5 production DVD's. I only installed AE on my macbook pro osx 10.6.8.
When I go to export my project/composition I only have 3 options, i can only export in flash player, flash professional, and premiere pro.
Where are the options to export as a quicktime movie and all the others?
Do I have to install the entire suite for these options to appear?
If so, why?
Thanks,
Jason

Render Queue.
More importantly, for the newly initiated, some time spent here would go a long way.

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Initializing Installer... and then nothing in Photoshop CS5 and Premiere Pro CS5

Hello. I have a pretty big problem, I can't install Photoshop or Premiere Pro on my PC. I get to the " initializing installer " part, it fills to 100%, then the window simply disappears. What should I do ? My OS is XP SP3, and I have enough HDD space left - around 50gb in C: and 550gb in D:, so this isn't the problem. Also, I don't have any old installs of Photoshop / Premiere Pro on my PC. As for the windows, I've just re-installed it last week, so I'm sure that I don't have any viruses or stuff like that. One thing that I must mention - before I re-installed my windows, I was able to install both Photoshop and Premiere Pro. I hope you can help me. Thanks

Photoshop 32bit should, but Premiere Pro CS5 will NOT install on WinXP... PPro CS5 REQUIRES a 64bit operating system to install
If you really need PPro CS5, you will have to upgrade Windows to Win7 64bit... the Pro version is most used for video editing
If you bought a CS5 suite, Premiere Pro CS4 is included for those with a 32bit version of Windows

AMD FirePro D500 and Premiere Pro CS6 and After Effects CS6?

My company just recently purchased the new 2013 Mac Pro with the AMD FirePro D500 graphics cards. Everytime I try to open After Effects CS6 I get a GPUManager Sniffer Result Code: 3 error and Premiere Pro CS6 sits on the splash screen indefinitely. Does Adobe not play nice with the new card? Am I out of luck?

In effort to fix the problem while waiting for a response I unstalled both AE and PP CS6 but not I can't seem to reinstall them from anywhere.... so I don't know what version of After Effects I have/had.
My operating sysem is OS X 10.9.2 (13C64) . My graphics card information is:
AMD FirePro D500:
Chipset Model:          AMD FirePro D500
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          3072 MB
Vendor:          ATI (0x1002)
Device ID:          0x679e
Revision ID:          0x0000
ROM Revision:          113-C3861J-687
gMux Version:          4.0.11 [3.2.8]
EFI Driver Version:          01.00.687
As far as CUDA, I originally had an iMac that was using Time Machine and that is how I transfered my stuff over to the new Mac Pro. It had CUDA on there...

Getting a U43M1D204 error when trying to update After Effects and Premiere Pro

Getting a U43M1D204 error when trying to update After Effects and Premiere Pro. I have tried reinstalling the cloud installer and all of my programs with no luck. HELP!! I need the update because I have no direct link from Speedgrade back to Premiere Pro

See if the following posting helps: http://forums.adobe.com/message/4629442#4629442

Encore 2 and premiere pro 2

Similar Messages

Maybe you are looking for