Encore Adobe Dynamic Link Audio problem

I have a multiple video files that I have put together in Premiere. The are HD Dolby 5.1 sound. I have about 10 of these together. So I export them to Encore using the Adobe Dynamic Link. I built the menu system. When I burn the dvd and try it. It plays through the first two clips just fine and when it gets to the third. The sound goes out and never returns on the rest of the clips. But when I test it in Encore and Premiere there is sound and it works great. Anyone know why when i burn the dvd I loose the sound on the 3rd clip? Thanks.

I can't help directly, but I never use Dynamic Link because I have read of problems
http://forums.adobe.com/thread/936216
http://forums.adobe.com/thread/938108
http://forums.adobe.com/thread/938549
So, as a test, export as appropriate out of PPro and then import the files (video & audio) into a new project in Encore

Similar Messages

Encore, Premiere, Dynamic Link, MPE & Problem?

My set-up is CS5 with an nVidia GTX-460 (hacked to conform for MPE). The project used is HDV 1080i60. I created the Encore project by importing Premiere sequences.   I am burning a DVD.
First an interesting discovery -
     I was surprised to see that Encore used MPE when transcoding. I have a gadget that shows GPU load.
Now the not so good -
     I was having a terrbible time getting the, very simple, single timeline, no menus, just chapter marks, DVD to burn.   Sometimes I got an "Encode Failed". And a few times the system (Win 7 64-bit) blue screened! Until this this system has been rock solid. In my debugging I figured that I'd turn-off MPE and see if that helped. Hmmmm. No option for that in Encore. However, I went into the Premiere project and turned it off there.   Voila! Encore now does not use the GPU and the DVD burn completed.
Of course, this could be an issue with my un-supported GTX-460. But maybe not . . . .
Comments?

I can't help directly, but I never use Dynamic Link because I have read of problems
http://forums.adobe.com/thread/936216
http://forums.adobe.com/thread/938108
http://forums.adobe.com/thread/938549
So, as a test, export as appropriate out of PPro and then import the files (video & audio) into a new project in Encore

Encore locks up when using the Adobe Dynamic Link to import Bluray video.

When I try to import video into Encore by using either the Adobe Dynamic Link or by opening Encore and importing as a timeline, Encore locks up during the "Prepare Transcode Settings" . I have Adobe Master Suite CS5 which was a download version. I've had this software since May 2011. I have been able to use import video in the past, but there seems to be an issue with Encore now. Has the program been corrupted? If I need to download Encore to repair it, how do I do this?
Thanks
Joe Miller

Some other things to read...
Reset Corrupted Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641

Adobe Dynamic Link or Export from Premiere and load into Encore?

Hi
I'm making some tests about authoring DVDs and Blu-Rays from Encore CS6. My video editions are made in Adobe Premiere Pro CS6.
Looks like I have 2 ways to send contents from Premiere Pro to Encore.
1) I can set all my editions in Premiere Pro, then Export the entire timeline to a MPEG-2 DVD or MPEG-2 BLU-Ray file, then start a new Encore project and import this video file as a timeline.
2) I can finish my editions in Premiere Pro, then use the Adobe Dynamic Link > Send to Encore options. So, it's not necessary to export files, since the task of transcoding is an Encore's task.
Question is: Any advantage of using way 1 or 2??? Thinking about speed to finish the job, is one way better than other?
What do you use do choose?
Thank you for these tips
Gustavo.

Hi Stanley
Thank you very much for your tips. Just one thing:
In Premiere we can choose, for Blu-Rays, the MPEG-2 or H.264 codecs. You mentioned the H.264 Bly-Ray choice.
Any advantage regarding the H.264 instead of the own MPEG-2 coded?
Best Regards and thank you very much again.
Gustavo.

PROBLEM - Adobe Dynamic Link - Premiere Pro to After Effects - CS5.5 Master Collection

To use Adobe Dynamic Link with After Effects is required Adobe Production Premium
How can I fix this problem? I have CS5.5 Master Collection

So after reinstalling all the Ap did it fix the dynamic Link issue? What was the solution. It appears that avanishdivya
gave some bad advice. I can't find any other threads that are discussing this issue except http://forums.adobe.com/message/5571320 and this didn't work for me either.
Clover

I can't find the adobe dynamic link to encore in premiere pro...?

New to encore and dynamic link... I'm running Premiere Pro CC and Encore CS6. When I go to send my sequence to Encore (File>Adobe Dynamic Link>..), there is no "Send to Encore" like what I've heard in seen in the tutorials... any ideas?
I've also tried to dynamic link from encore to premiere pro, but it never loads the sequence.

a workaround for the Cloud http://blogs.adobe.com/davtechtable/
-http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

Encore CS6 Dynamic Link

I think most of the people here will agree with me. I have noticed that since upgrading to CC I have had lots of timewasting work arounds to create a Blu Ray and DVD using Encore. In the past I used to create awesome quality Blu Rays and DVD from the same Encore Project dynamically linked to PrPro. But with CC the workaround is time consuming and I don't think the Blu Ray and DVD will be going away as predicted by Adobe. As a result of this I just can't wait to terminate my CC subscription at the end of my contract this year so I can revert to CS6.

For the record, I don't see any problem with dynamic link as long as it works. The "automatic" setting in Encore has worked fine for many people. There may have been slightly better quality options, but for many users, the quality was good. The problem has been that there have been increasing numbers of situations where it does not work correctly, including HD to SD that made it a bad workflow for almost all users.
The belief that it saves transcoding time seems so reasonable, it is hard to realize that it does not. The savings that may occur are in workflow that avoids bitrate calculation for longer projects.
Surkweza appears to be one of those who found workflows for SD and BD that worked. We don't hear from many.
And yes, its moot now, since there is no dynamic link CC to CS6. So the best CC users can do is to learn to create DVD/BD ready assets at the best quality their program length will allow.
But the bugs make the frustration of users like srukweza harder to resolve.

Adobe Dynamic Link

Hey Everyone:
Just curious about something.
When using the Adobe Dynamic Link feature in Encore, I import an After Effects project for a menu (or menu transition; basically whenever I use the AD Link). As with most any project I want to make a change to the AE project I imported so i go into AE and fix it, however my changes are not displayed in Encore. This is no big deal but I know the whole point of the Dynamic Link is so you can see instant changes when going from program to program.
The link works as it should when I'm using premiere, but it seems like the projects are not updating themselves in Encore when I change it in AE.
Anyone else have this problem?
Thanks!
Tony

jimclark1947 wrote:
So is Pr Seq the file name I will look for? And can I expect to find it in the default folders set up when I installed CS4?
When you are in Encore and import a Pr Seq , navigate to the Pr Project name and when you select that the sequences inside the Pr project will be displayed. There are no OS file names associated with the Sequences because they arent rendered yet or need even to be rendered.
Take care to be patient when you click on the project name; it can take several seconds for it to lookup and display the sequences in the right pane.

How to send Video from Premiere to Encore via Dynamic Link

Hi there. So I have the adobe suite for students, and I have a project in Premiere Pro, that I would like to make into a DVD. I have exported before with MPEG-2 DVD, but that takes a lot of time and energy, and I don't think the export is as good as it could be (quality-wise). So I would like to use Dynamic Link between Premiere and Encore, but when I go to File-Adobe Dynamic Link- the Dynamic link option is greyed out and I can't click on it which would let me choose "Send to Encore". How can I make this option not greyed out and send it to Encore? Thank you so much for your time!

As the source is HD, then the output should be 16:9 widescreen, but you listed it as 4:3.
In AME, choose "MPEG-2 DVD" and then "NTSC DV Wide Progressive" preset.
Besides bitrate, generally don't touch other sliders unless you are experienced, use defaults.
You CAN use the "Max Render Quality" checkbox at the bottom, as that helps with the downscale quality.
While DVDs can theoretically handle a max data rate of roughly 10Mbps (video and audio together), not a good idea to push that limit - as mentioned previously, some players may choke on playback with burned media. Most users have stick to a maximum of 7 or 8 for the video encoding, and then use Dolby audio (Encore will automatically transcode PCM to Dolby).
For longer videos over an hour, you may need to lower the bitrate to fit the material on the DVD. 560/minutes = bitrate works pretty well, just round down a little for safety margin. Example: 560/120=4.66 so use 4.5 average and good to go!
Thanks
Jeff Pulera
Safe Harbor Computers

Adobe Dynamic Link doesn't work !

I'm using Adobe Encore DVD 2 and After Effect 7 . My problem is i can not use the Adobe Dynamic Link . It's always invisible , and i can not use it to import After Effect Composition to my DVD project or Create New After Effect Composition . Please show me how to make it possible to be used . Do i need to do something more !

Answered

Why does my Premiere CC 2014 crash every time I use "Adobe Dynamic Link" and have After Effects CC 2014 open in the background?

Here are my MacBook Specs:
MacBook Pro (15-inch, Mid 2012)
2.6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 650M 1024 MB
480 GB Solid State SATA Drive
750 GB SATA Disk
I use "Adobe Dynamic Link" mainly for typography and some animation, but not to the point where it would stress out Premiere CC 2014.

Chris,
It doesn't crash for everyone. A person could be forgiven for saying, in return, "Please sort out your **** system problems".
Trust me when I say many, many problems are caused by the computer system setup not being up to the needs of this cutting-edge graphics software. Photoshop is heavily dependent on the GPU, and GPU drivers are notorious for having bugs (they're primarily written to run games).
However, that being said, recent driver releases from both ATI and nVidia do actually work pretty well with Photoshop CC 2014.
What video card do you have?
What display driver version are you running?
If you're unsure how to tell these things, go into Photoshop, choose Help - System Info, copy the data, and post it here.
-Noel

Adobe Dynamic Link Error

Lately, when I try to open a Premiere Pro CS3 or CS4 project in Encore CS4, I set this error message: "an adobe dynamic link error occurred". It used to work but now it doesn't. Anyone know why?

Something went corrupted in your system you will have to run the Clean-up Scripts and reinstall.
Best thing to have full functioning Reinstall from a Clean Formated hard Drive
Regards
Julio Cesar

File failure with Adobe Dynamic link when opening a *.prproj file - Premiere Pro CS4

Hi everyone,
I'm trying to open a Premiere Pro CS4 file (*.prproj) but the bar that appears sating 'Opening file' (or similar) gets stopped before finishing to load the file.
I tryed to export some sequences using Adobe Media Encoder CS4 (I wanted to rescue my work), but when I have to select the sequences that I want to export, it says that there is a problem with Adobe Dynamic Link.
Any idea for rescue the file?
Thanks!
Jordi

function(){return A.apply(null,[this].concat($A(arguments)))}
enrage222 wrote:
which question? the 9 dots?
Go directly to http://premierepro.wikia.com/wiki/Troubleshooting
Read and follow all instructions for troubleshooting
Report back with the answers to the questions at the end of that link

Import Premiere Pro Sequence grayed out in Adobe Dynamic Link

I'm using PPro CC, and encore CS6. I have created a finished sequence in Premiere Pro, and I want to bring it into Encore. When I go to -> file -> adobe dynamic link, the premiere pro sequence option is grayed out. Why?

OK, well that explains it. Does that mean that if I import a PProCC sequence into encore,
It means you can't import the sequence itself. You must export a file of some kind from PR/AME, then import that. And yes, there is no way to get your CC projects to update automatically to Encore. You must export a fresh file. You can use "replace asset" and such to simply changing the file.
I went to the link above, and was somewhat distressed to see that the industry is moving away from physical media in favor of streaming. Won't happen in my lifetime, but a world without books and records and DVDs and CDs, etc.? Scarey!
Adobe needed some excuse, and that was theirs. There is clearly a very significant number of users that are a) event videographers/editors who must deliver DVD/bluray to clients and b) hobbyists who want the disk format for themselves and to share. My favorite guesses are a) that Rovio's takeover of Sonic/Roxio voluntarily or involuntarily squeezed Adobe financially or b) they don't want to invest the dollars in other aspects of fixing/upgrading Encore.

How to get Adobe Dynamic Link update?

I have finished few project with Adobe Dynamic Link but my last project has given me some run around, I have notice the Adobe Dynamic link has not been updated when updated my Premiere sequence. (I use the Sequnce for the timeline from Premiere) Is there a way to refresh the Adobe Dynamic Link so my Encore Project has the latest sequence. Thanks for your input.
Wayne

Try this:
http://forums.adobe.com/message/4052001#4052001

Encore Adobe Dynamic Link Audio problem

Similar Messages

Maybe you are looking for