Encore: Audio from imported mpeg goes missing 1/4 of the way through the video

I have an mpeg that I imported into Encore and the audio stops working part of the way through the video. There are no issues with the audio outside of Encore...it plays throughout the entire video. Any suggestions on what could be the issue?

Rob,
Never used Elements, so not familiar with what the Export options are. However, H.264 is best used an a delivery format and not an "intermediate" codec. By first converting to H.264, then letting Encore transcode again, there is quality loss. If you must use an intermediate, an .avi would be a better choice, something high-quality with less compression. For instance the free Lagarith or UT codecs are great (just download/install) if Elements export options would let you configure something like that. Basically a lossless encode step (or as close to lossless as possible). Then bring that .avi into Encore.
To add to Stan's comment, IF Elements does have an "H.264 Blu-ray" export option available, that should result in .m4v and .wav clips, m2t is not part of the equation.
Thanks
Jeff

Similar Messages

HT201269 When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.

When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Also... See Here > Configure security software

Music I have downloaded from itunes some of them have cut off half way through the song how do I restore them, I have even tried to sync them again

Music I have downloaded through iTunes, some of the songs have cut off half way through the song, I have even tried to sync them again but have not been able to restore it, how do I restore the music lost?

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

When I connect my iPhone 5, iTunes opens and the sync begins. It goes all the way through the process then stays on "Finishing Sync" and never continues. It doesn't do this with my iPad 2 on the same computer. How can I get the iPhone to finish syncing?

I am using a Dell XPS 8200 running Windows 7 Professional.

anthonyitaliano
HT1386 Re: My new iPhone5 won't finish syncing.
Nov 10, 2013 5:47 AM (in response to anthonyitaliano)
not sure if this is a permanent fix but, ever since upgrading to itunes 11.3.1, my iphone5 seems to finish syncing on its own, now. didn't seem to be a problem anymore. at least after doing only one sync, since the upgrade.
(stiil have a blank "purchased" page at itunes store, though).

ITunes goes all the way through the download process and at the very end fails. what is the problem?

Couldn't get into iTunes. Advised by error message to download iTunes again. At the very end of the installation, it fails and tells me to try again. What is the problem here?

At the very end of the installation, it fails and tells me to try again.
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

CS5.5--Issues with audio from imported avi's & issues exporting

To Start, my laptop:
CPU: Intel® Core ™ i7-2330QM CPU @ 2.00 GHz
CPU Clock Frequency: 2.00 GHz
System Memory: 8 GBytes
Cache Memory: 1 MBytes/6 Mbytes
Manufacturer: Sony Corporation
Model name: VPCF226FM
BIOS VERSION: R1190V#
OS Version: Microsoft Windows 7 Home Premium
ME Version: 7.0.10.1203
System Type: 64-bit Operating System
I downloaded the 30-day free trial of Premiere Pro CS5.5 with all updates. To play with the program, for my own personal amusement, I wanted to edit together pieces from a bunch of avi videos that I know to play properly outside the program, tested on more than one computer.
At first, importing the files seemed to be no problem, making subclips as I went along.
However, as I continued to import files, there began to be a sound issue--sometimes the sound not being present till I was 1/3 of the way through the clip, sometimes the sound seemingly playing catch up with audio that should be earlier in the video appearing later, sometimes the sound wouldn't come up at all, and still other times I'd be, for example, on video 5 when pieces of audio from video 2 would start playing over the current video.
I initially thought it may just be a memory issue, working with many large video files.
But later, when I went to edit the subclips I made, I found that many of them no longer had sound, even if they did when I initially subclipped them.
Weirdly, in the timeline, there is no consistency, as clips will appear in the video track but only some show audio tracks too. But those with audio tracks don't always play audio and those that show NO audio tracks at all actually do play audio sometimes. Also, those that show audio tracks and don't play them sometimes will show waveforms, sometimes don't. A clip with no waveform may not play 95% of the time, but then occasionally will suddenly have the waveform and play a couple times before reverting back to no audio.
A suitable solution for this personal amusement project would just be to drop a new soundtrack over the thing but, before I even got that far, I tried exporting as avi's and mpeg4's but then get error messages such as:
Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-785]
Error compiling movie.
Unknown error.
In case it was a memory issue, I tried starting a new project, only importing 2 videos, but had the same audio and exporting issues.
I'm getting really frustrated as I spent a lot of time importing/subclipping and then even more time prepping before that.
For those who are bound to ask, while new to Premiere, I'm not a novice with editing. I've used Final Cut Pro at work for many years (without such issues).
Thanks for your help.

You might start at http://www.xvid.com/
Tools to Convert to DV-AVI http://forums.adobe.com/thread/415317
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Convert SD (Standard Definition) files to DV-AVI Type II with 48KHz 16-bit Audio
As well as the links just above, use Google to find conversion software
I have NOT used the products below, I only forward due to other mentions... so YMMV and all the usual disclaimers... check the links and read to find out if one of the products listed below will rip or convert the files you have to something you need for editing
http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
http://www.womble.com/products/mvw.html
http://www.magix.com/us/movie-edit-pro/ plus $5 Ship
http://www.nchsoftware.com/prism/index.html
http://www.videoredo.com/en/index.htm
http://www.daniusoft.com/media-converter-ultimate.html
http://www.deskshare.com/media-converter.aspx Digital Media Converter
http://www.topsoftwareol.com/product/Video/Video_Converter_Standard.html
http://www.erightsoft.com/SUPER.html Multi-Converter <-- supposed to be very good
http://download.cnet.com/FreeStar-Free-Video-Converter/3000-2194_4-10854990.html
http://www.videohelp.com/tools/XviD4PSP

Audio cuts out most of the way through an iDVD image

We created a Quicktime file using Final Cut Express HD 3.5, and imported the Quicktime fill into iDVD 6 (all patches have been applied to iDVD and to Quicktime, and Quicktime has been upgraded to Pro version). The iDVD preview shows that all audio is present all the way through the end of the video(about 1 hour and 5 minutes), which means that the Quicktime file has all the audio present.
However, after creating a DVD disk image with iDVD 6, the audio cuts out completely about 55 minutes into the video. The spot where the audio cuts out is not near any chapter marker nor near any transition of any kind in the Final Cut editor session.
By the way, I am creating the image on an external Firewire drive with 112 Gbyte free, although we also tried the internal hard drive which has about 20Gbyte free.
How can I figure out how to get all the audio onto the image created by iDVD?

I believe I've found the cause of the problem! Within Final Cut Express, I found a system setting for output buffer size, set by default to 2Gbyte. I also found that the default 'Convert to Quicktime' setting is for Internet Fast Start. I increased the buffer size from 2Gbyte to 3Gbyte and unchecked Internet Fast Start, and I have no more audio drop out!
I think that iDVD has a bug when multiple file segments are linked together in the Quicktime file (because of the smaller FCE output buffer size). Note that the iDVD preview did not experience the problem, so that part of the iDVD app seems to handle multiple file segments correctly, whereas the part that processes the file segments while creating the DVD image seems to have the bug. Increasing the buffer size masked the iDVD bug.
So if anybody from Apple is listening, please fix your iDVD bug please!
Concerning the ZR85, I do re-use tapes quite a lot and have never experienced problems. I do clean the ZR85 heads periodically. However, I shall consider using new tapes more often.

HT201401 I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to und

I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.

http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
https://discussions.apple.com/message/17777381 - making a ringtone
Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected

Anyone have an idea why clips imported are silent half way through the clip? The entire audio can be heard in quicktime.

Anyone have an idea why clips imported are silent half way through the clip? The entire audio can be heard in quicktime.

Solved problem by converting to another file format.
The two that worked were .mov and MP4 that is .H264

Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it, the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops.. What's going on with it? Is it the encoding proocess?? I'm stumped...

Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it, the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops.. What's going on with it? Is it the encoding proocess?? I'm stumped... Help me out here!

Hi
A. iMovie'08 to 11 are not the tools of choice if one aim to do a DVD as they all discard the quality of the picture by discarding every second line in it. NO way around this due to that it happens between Event's and Project's so as soon as it is being edited - Quality is lost.
B. I use iMovie HD6 or FinalCut
C. if iM'08 to 11 is a must - THEN DO NOT - Share to iDVD - BUT - "Share to Media Browser" and as Large (or ev. Medium)
THEN DO - Save as a DiskImage and see that this plays OK and ALL SOUND
D. if added audio from iTunes - then instead in iTunes - Collect all needed Audio into a NEW PlayList then BURN this as an Audio-CD (.aiff - NOT .mp3 or other) - Then use the Files on this CD in Your Movie Project's (I do)
E. I only use .aiff audio - 48kHz 16-bit (miniDV tape Camera) or 44.1kHz Audio CD - NEVER .mp3 or .wma or other file format - ALL is converted first into .aiff - ALWAYS ! - I have very few problem with Audio in my projects in iMovie or FinalCut !
Yours Bengt W

My ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

my ipod touch has 1.1 gb left of space on it. when i try to install an app thats 314 mb it gets three quarters of the way through and says my ipod has no space left. when i go to the storage it also says it has no space left. whats going on?

To download/install an app directly to the iPod you need available storage equal to about three times the file download size. Syncing the app to the iPod requires a lot less. Thus you either have to free up more storage or sync the app from your computer.

Exported HD video from Premiere Pro CS4 via Media encoder Freezes mid way through video

Hi,
I couldnt find this raised by anyone else so thought id start a new thread. Ive tried a couple of times to export an edited project only to find the video is all good up until roughly half way through the video at which point the video freeezes, the time keeps moving along as if its playing but no video. It looks like the encode failed at this point. I have no problems if I split up the video and export it in smaller pieces but obviously this isnt good enough
Any ideas as to the cause?
Additional info:
Im patched upto CS4.1
Source footage is AVCHD
Project goes for just over an hour
Cheers

That suggests some failure somewhere in the encoding process. It could be something in your timeline around 43 minutes, maybe a blank space (even for a single frame), a disk hiccup causing some part to go missing, other hardware problems. It could be a myriad of things going wrong. What background processes are running, what is your hardware setup, what are the temperatures during encoding, etc. Check the second part of this link: If you need help quickly...Guideline for posting an effective question

I can't get any sound from ITunes. The computer's internal speakers are fine (they play utube sound, for example). And the sound bar on itunes is all the way to the right. Still no sound from the music library. Any insights?

I can't get any sound from my ITunes library. The IMac is set to internal speakers, the volume bar on ITunes itself is all the way to the right, there seems to be no problem with the speakers themselves (they play sound from internet videos, for example), but I can't play music from the ITunes library on the IMac. Please help!

Is it possible that you have iTunes set to send audio through AirPlay to an AirPort Express, Apple TV, or other AirPlay device (which is itself not turned up so you can hear it)?

HT201263 Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?

Delete the .ipsw file on the computer.
Put the device in DFU mode.
Restore as new, once the restore completes, then try restoring from backup.

After typing in my password, the startup loading screen goes 1/3 of the way through and then shuts off.

I can't login to my user account. I can type in my password, but the loading screen only makes it 1/3 of the way through before my computer shuts off. I'm running OS X Yosemite 10.10 on an 11-inch 2010 MacBook Air.
Not sure if it's relevant, but I seem to be having some graphical issues as well. When I scroll, text is sometimes jittery, and the corners of windows are black squares.
I've tried going to Recovery Mode and reinstalling OS X, but it tells me there isn't enough space — I have approximately 11 GB free, and it says I need 2 GB more.

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note. Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

Encore: Audio from imported mpeg goes missing 1/4 of the way through the video

Similar Messages

Maybe you are looking for