Encore can't burn more than one DVD at a time: Sense Code 56400

For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD
I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on everything accept my hard drive which is 7.0 out of 7.9 according to my Windows 7 Pro. 64 bit system.
I have 2 different DVD burners, one is a blu-ray burner too. I have the same issues, only different error readings it seems, on both drives. The first drive didn't burn even one for some reason so I tried the second. The second drive would burned 3 and on the fourth I got the errors' which I've included screen shots of below. I was surprised I got through three before I got to this error. By the end of the week I have a large project I need to make 30 DVD's of. HELP!!!!!
A long time ago on my older machine I had similar problems and I went through different drives and discs until I seemed to come up with the magic combination which seemed to be a Plextor burner and Verbatim. But, then i got a bad batch of verbatim and tried Maxell and used those successfully for a while. Right now I'm using what a friend gave me, TDK's. I'm wondering if that's what the problem is... HELP!!!!

I have managed to get it to work consistently now. I just burned 20 DVD's without a problem.
I tried everything you suggested except the imageburn software. I didn't like that site, I was too anxious to try and figure out where to download that software in the midst of all the advertisements on that site.
After clearing out everything in startup and services except what I needed I still wasn't able to burn successfully. Finally I went and purchased some Verbatim DVD-R discs and wahlah! Actually, after the first try with the verbatim I had an error code when trying to burn with Encore. So, I created and image file as you suggested and then I used Cyberlink's Power2Go to burn the image file and from there on it seems everything is solid.
I think the biggest problem was using TDK discs. I came to the realization a few years ago that certain disks are not as predictable as others and that verbatim and maxell seem to be the best. I did get one bad batch of verbatim though one time and that's when I switched to Maxell. My friend gave me 200 of the TDK's and I've been having problems ever since. But, I wasn't sure what it was exactly because he gave me those around the same time I rebuilt my system.
I had also found the Plextor seems to be the best bet for burners. But, I had been using an HP one lately and thought maybe that was the problem. However, now it seems to be fine.
I really don't know what fixed it. I mean, nothing definitely worked until I started using the Verbatim today. But, that first verbatim erroring perplexed me. I had done some other things too, like removed some programs, like a bunch of HP printer crap. I even removed my virus software, Window Security Essentials. I just reinstalled it so now I'm wondering if I can burn as consistently. I had seen somewhere where someone said they removed Windows' Defender to get theirs working.
Anyways, I guess what I need to do is format my main hard drive, only put adobe stuff on it, and then take my old computer set it up for everything else. That'll probably be the best thing to do... If I have anymore problems like this I'm doing that right away!

Similar Messages

Burning more than one dvd

Anyone know of a way to burn more than one DVD at a time with DVD studio Pro if you have two burners in your machine?

Hi Mossie,
I got a product this summer - Dragon Burn from NTI.
http://www.ntius.com/dragon_burn.asp
It's not as easy as Toast, but works pretty well. There are a few extra steps to creating the disc image to burn from , but not too bad.
Give it a try. They have a demo on the site.
Bill

How can I buy more than one item at a time?

How can I buy more than one item at a time i iPhote fx a book and a calander? It would be nice to place one order and only pay for the shipping once!

You can't.
Regards
TD

Can't print more than one job at a time.

I am trying to print to either a HP DesignJet 1055cm plotter or a HP LaserJet 5000N. I can't send more than one file at a time. If i don't wait until the current job starts printing, the next one won't print. For example if I sent five files one right after the other, I might get 1, 4 and 5. I don't think it's a printer problem because it happens on two different printers, and it doesn't happen when I print from my PC. Any idea what could cause this?

My work around is to put all the jobs "on hold" in the print settings or just "stop jobs" on the printer window.
Then I click on each print job in the que and let them print one at a time. This way I can at least quit the program and move onto the next thing.

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?

When I open an event, including flagged items, the photos appear one by one, not as thumbnails, so I can't export more than one phot at a time. How do I get iPhoto to show the thumbnails?
I've tried rebuilding the thumbnail database, but that hasn't helped.

What version of iPhoto and system are you running?
Try moving the Zoom slider at the bottom of the iPhoto window all the way to the left. Does that let more than one photo display in the window?
OT

HT5525 How can I order more than one picture at a time in iphoto?

How can I order more than one picture at a time in iphoto?

It's also wise to crop the photos to the print size you're ordering so you have control over what portion of the image gets printed. Otherwise, the image will be scaled so the smaller dimension fills the paper cropping off some of the oither dimension.
OT

Can we ask more than one question at a time in Quick Poll?

Dear Experts,
Can we have more than one question at a time in Quick Polling.
The User has to answer more than one question in single poll.
is that possible?
Thanks in advance for your attention.
Regards,
Viswes.

Hi Viswes,
Through customize u can achieve ur requirement..
Create two Quickpoll with different campaign name and start ongoing..
Next create iview for each quickpoll by using KM QuickPoll iView Template enter the corresponding campaign name for the quickpoll iview.
Next create one JspDynPage component in NWDS
In that JSP file
<iframe src="Give the preview path of Quickpoll iView 1" align="left" >
</iframe>
<iframe src="Give the preview path of Quickpoll iView2 " align="left" >
</iframe>
Now u create one iview for that JspDynPage component
in that two Quickpoll question will display in one iView..
Points are welcome if its helpful
Regards
Thillai

ITunes Won't Burn More Than One CD at a time...

(I am sorry if this is in the incorrect forum)
When I attempt to burn more than one CD (one right after the other) using iTunes I get an error message stating that the computer cannot calibrate enough laser power...and it spits the CD out. If I wait a few hours/restart it works again— anyone know if this is just an iTunes problem?
Thanks,
Krista

Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
You can provide iTunes feedback here:
http://www.apple.com/feedback/itunesapp.html
If your post was a question, post back and I'll see if I can help.
I hope this solves your problem!

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can't gift more than one song at a time

Does anyone know how to gift more than one song at a time (not an album, but non-contiguous songs off one or multiple albums)?
I tried adding them to my wishlist so I could add in several, but I already own several of the songs and you can't add songs you already own.
Of course, this would be resolved if they would just bring back the shopping cart, but for now, I have no idea how to accomplish what should be a very simple task.

It is, indeed, frustrating, and seems short-sighted on Apple's part. Imagine a shop owner saying, "You can buy anything you want for yourself, as many as you like, but if it's a gift, you can only buy one."
I did receive a nice response from Apple confirming that this is, in fact, impossible to accomplish:
Dear Michael,
Welcome to iTunes Store Customer Support. I am Animesh and I will be assisting you today.
Thank you for your interest in giving an iTunes Store or App Store gift. I understand that you would like to gift multiple songs from different albums. I understand that this is important for you.
Michael, please note that you can buy a song, an album, a video, an audiobook, a TV episode or season, a movie, or an application for anyone who has a valid email address. However, there is no such option to gift multiple songs at a time from different albums. You are required to gift them individually, also the Wishlist feature is for personal usage and not gifting.
I can realize that it must be difficult for you. I have felt the same way in the past when I've found myself in similar circumstances. I have found in situations like this that voicing your opinion is a good way to get the "ball rolling".
Please know that Apple takes the feedback from our customers very seriously. This is the reason for our feedback page - to create a forum where our users can vent, praise or share whatever feelings they have to allow us to meet your needs, and grow as a company.
I took the liberty of submitting your feedback to Apple on your behalf. I would also encourage you to share this link with all of your friends and family who wish to submit the feedback, and have them all submit the same request.
Here is the link for you.
http://www.apple.com/feedback/itunesapp.html
I know sometimes it feels as though submitting feedback will not yield results, so I will also invite you to check out the following link. This is a letter from Apple's CEO addressing customers who purchased an iPhone very early on at $599, then the price went down to $399 shortly after. Mr. Jobs heard our customers and Apple responded accordingly.
http://www.apple.com/hotnews/openiphoneletter/
I hope that you will consider sharing your thoughts on the feedback page.
Michael, we very much appreciate your concerns, and if there's anything else I can do for you, just respond to this email and let me know. Thank you for supporting the iTunes Store.
Sincerely,
Animesh
iTunes Store Customer Service

How can i update more than one table at a time?

i would like to update more than one table at a time. In Java Studio creator2 how can i do table updation?

Hi,
Please go through the below thread might be of help to you.
http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=51839
RK

Can I import more than one song at a time?

Hello all, this is my first post so go easy on me...lol
I just purchased my first iPOD today and seem to notice so far that I can only import one song at a time into iTunes library. I cannot select more than one song at a time by holding down the shift button. These are songs that I already have on my computer, not songs just ripped through iTunes. Also how can I get album art onto all of my songs? I've noticed that only one album so far has album art on it. The others don't. Thanks in advance.
Toshiba Tecra 8100 Windows XP Pro

Thanks Rachyl, I'll try that when I get off of work. What about the album art? How can I make sure I get it every time in the future. Can I rip my CD's using another software to make sure they are tagged right?
BTW I used to live in NC not too long ago and went to school there....GO HEELS!

Can I delete more than one message at a time

Is it possible s to delete more than one message at a time and can I stop it putting them back on my phone once deleted??
any help would be appreciated.
thanks
allisongs

This question was answered here I think:
https://discussions.apple.com/message/6799512#6799512

How can I highlight more than one pic at a time?

First of all, THANKS for anyone that may answer since APPLE obviously has no desire to get off their ***** and help their customers.
About ten days ago I was prompted to install apples new operating system. So of course I clicked OK, idiot that I am!
Now I'm stuck with this new piece of **** operating system that I wish I could uninstall.
ANYWAY,
I upload a lot of pix for stuff I sell on EBay, sometimes 3-400 at a time. When I delete photos it's usually 1,000 at a time, and I assure you I'm not exaggerating. Up until now I was able to touch the END pic and swipe the whole horizontal row with two fingertips and the whole row of 7 would get checked. With the new ios7 I am unable to do it anymore (yet ANOTHER reason I don't want this 'improved' OS).
Does ANYONE know of a way to highlight more than one pic at a time?? Remember the old windows system where you could click one pic, then hit SHIFT and click a lower one and it would highlight them all, in between, for a quick delete?
There MUST be a way to delete, or rather highlight (or CHECK) more than one pic at a time? Anyone?
THANKS, Rich

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

Can we open more than one "folder" at a time in Bridge?

When I click on a folder icon, the images appear in the Bridge workspace. Then when I click on another, different, folder icon, the previously displayed images are gone, and only the second folder's images appear. A priori, this seems to be an unnecessary limitation on functionality, and therefore I presume that I just do not know how to do what is called for: To use the functionality of Bridge for more than the contents of only one folder at a time.
Yes, I know that I could, using, say, Windows Explorer, create a sort of "megafolder" into which I copied the contents of several folders, but this seems to be a kludge which should not be necessary.
Did the designers of Bridge not contemplate that users would want to operate on the contents of more than one folder at a time? I presume that I am just ignorant of how to achieve what should be a normal functionality; seeing more than the contents of just one folder at a time.
Please alleviate my ignorance.

Quick way: Press Ctrl+N (Cmd-N mac) to open a new Bridge window. Open the second folder there.
Not so quick way: Select menu File => New Window. Open the second folder there.
If you MUST view all of the files in one window, all of your files MUST be in folders nested within the same parent folder. In that case:
1) View the parent folder in bridge.
2) Open the Filter palette.
3) Click the microscopic button in the top left corner of the Filter palette, which looks like a folder with a "No" symbol on it. The tooltip label for that button is, "Click to view all items...".

Encore can't burn more than one DVD at a time: Sense Code 56400

Similar Messages

Maybe you are looking for