Encore cancels DVD writing and ejects?!?! Help!

Ok, I know I just posted a little while ago, but now I am having a different problem.
I created a new Encore project and imported all my assets. They were all in MPEG2-DVD format.
In the middle of encoding, Encore will cancel the process, and then eject the DVD. Last time this happened to me, a message popped up saying that the "File was not a valid MPEG" or something like that. Now, the program just freezes.
"Test before writing" is unchecked."
Please help!!!
--Brittany

>have the same problem
No, you don't have the same problem... original problem concerned After Effects created file
Please start your own discussion, and provide DETAILS such as the below
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Similar Messages

Pavilion Slimline DVD drives and eject wire...

I tried to replace the DVD drive on my Pavilion Slimline with an HP dvd1270i DVD drive. Had no problems installing it until I tried to plug the eject wire to a plug on the new DVD drive. Problem is, there's no plug on this drive to attach the eject wire to. The DVD drive that originally came with the Slimline does have this plug. Can someone recommend a DVD drive for the Slimline that does have a plug for the eject wire? Or is there a way to transfer the plug from the old drive to the new drive? Thanks in advance...

I have similar problem on my micro PC case from HP
CD rom tray has not mechanical device for ejecting media but electrical switch instead.
There is no chance to reach eject button on DVD ROM, because it's hidden under doors on the case.
And that {Content Removed: Language Filter Evasion}non standard HP connector for opening CD used on case is not compatible with any DVD ROM I can find in my local store including HP products.
And nobody knows anything about that.

Encore DVD Writing Cancels won't play on DVD player issue

So I have a very confusing issue with encore.
When I press build everything works fine. Then writing begins. The moment the writing reaches the end of the progress bar (the exact moment) the progress bar goes to empty and the bottom bar says canceling and ejects the DVD. Usually (not every time) a pop up menu saying "end of file" appears next. When I press ok for end of file message the pop up disappears and suddenly the DVD progress bar is filled and the DVD says completed (as if nothing just happened). So I'm confused whether it worked or not!
I reinsert the DVD that just ejected into my Mac and it works! Then I put it into a DVD player and it won't play, it won't play on my old Xbox 360 either, but it WILL play in a Bluray player?!
Everytime I rewrite the files I get different results. They all work on my Mac and blu ray but only 1 of 4 works in the Xbox. The one that does work in the Xbox will read in the DVD player but plays choppy and skips around as if the DVD is scratched or damaged?
! Other differences involve the write speed, sometimes the options are 8x or 4x. Other times its 3x,2x, and 1x. When the latter write speed options occur I cannot press "test before writing" it's greyed out. When 8x and 4x are the speed options I can check it. I used different DVDs and it didn't help.
I work for a company that needs to copy the DVDs but they can't be copied. Don't know why?
Here are my settings
Mpeg 2-DVD exported from Pr.
720x480
Codecs: Mpeg video, Mpeg layer
Duration: 1:10:26
Encore DVD transcode status: Don't Transcode
Encore Project/assets
2 Menus
1 Mpeg video
1 Timeline
Build
Format: DVD
Output: DVD disc
Source: Create Using current project
4.7 gb disc
Has 510mb free
All regions
Unlimited copies
First Play and title button are a menu
Check build is good.
I really need help with this weird issue quickly thanks.

Just an Update, I've tried many things to no avail still have a few others to try. Being a Large file it takes a while to try things.
I went ahead and got Toast, but considering that the Image Iso and the DVD Folder both gave me the End of File Error and the Disc "Failed Completed" Error I figured it a no go and it was. It did however give me something that Opened everywhere (Mac,Xbox,Dvd) , but it did not play on the Dvd correctly.
I've done numerous things in the Mac permissions end Like trying as a different user and running as the Root User, but it was also unsuccessful.
I've Re- Exported the file many different ways, but finally had a breakthrough using a version of M2v. It's definitely an error with Finalizing. My disc previously began to mess up and give "END of File" after it finished writing, it never even made it to the "Writing Lead Out" stage. I beleive this is why it plays it certain places fine, but probably not as well in systems (like Dvd players) that require those last few steps like writing Lead Out.
The only issue I have now is that when I put it into the DVD player it say "No title"!?!? AY CARAMBA!!!
Now I'm working on trying to figure this NEW problem! I have all my menus and links in place, but no go. I think it may be related to the previous problem in that something beneath the surface is wrong with my computer. Being a used Mac with a restored Hard Drive there are probably endless possibilities, but I hesitate to think that way because it may also have absolutely nothing to do with it.
So any help is greatly appreciated
whether it be a specific issue you know of dealing with used Macs and issue similar to mine
or just on the "NO Title" error as a separate issue. I'm hoping this "No Title" is something simple and unrelated, I've already burned through about 13 discs and even more pain pills for the headaches!!

Encore CS4 cancels itself during DVD writing.

When I try to build my DVD everything works fine up until DVD writing. Then Encore suddenly says "canceling" and ejects my DVD-R with nothing on it.
I've tried several DVD-R brands, cleared the media cache, checked the project for orphans and what not but nothing seems to work. I've also made sure Encore is at write speed 2X (the speed my Mac can handle).
I have 2 Premiere movies on the DVD (not Dynamically linked), and a bunch of .mov files in timelines from After Effects. Once again, everything seems to get transcoded with no problem, it's just afterward when it says "writing" that it suddenly cancels.
I'm using a Intel iMac purchased in 2008. Any help would be great!!! Cheers

Add me and my problem to your list of those who have had the Party HD menu.
I have a problem that may be related. Come see my thread:
http://forums.adobe.com/thread/457417?tstart=0
Please any one with a solution post it somewhere. And I don't want to hear "Rebuild". There was a time a while back where one of my Premier Projects corrupted and someone in an obscure thread posted a link to an xml editor that could read into the project files for premier and allow you to edit out the corrupt bits. I used this and it fixed the problem enough that I could resurrect the project. I was hoping someone knew of a similar thing for Encore.
The Encore project i have been working on is so close to complete and more than 2 years in the making. It took me a couple of weeks getting my menus and AE backgrounds all sorted out, to have it collapse on me now means another 2 weeks or so rebuilding the menus. If I could look into and edit a backup of the project to see and fix what was wrong it would mean a lot of time saved.
I am suspecting that Party HD menu and possibly a few other "orphan" links to assets I deleted from the hard drive are the cause, but until I see the reference I wouldnt know. I really need to at least have a window into the Encore project file.
Anyone have any ideas?

Help, DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

DVD Driver keeps ejecting DVD and requesting a Blank, I insert a Blank and the same message keeps coming up, any suggestions ?

Hi
a. You are using Cheap media as Memorex, NoName etc DVDs - I only use Verbatim
b. You use a DL-DVD or DVD+/-RW type of media - Old Macs can not use DL-DVDs - I only use DVD-R
c. Your DVD-burner needs a cleaning - Cleaning DVD without liquid but the brush type
d. Is there OK free space on Your Start-Up (Macintosh HD) hard disk - I never go less than 25Gb free.
e. Can You describe the material used to create Your DVD
- Video Codec/s
- Photo file formats
- Audio file formats
iDVD can not use all but only a few of them - still it tries and then often fails
Just to start by.
Yours Bengt W

Encore CS 3 did not recognite DVD-RW and DVD+RW

HI
Is there any one could burn DVD-RW or DVD+RW on Encore CS 3 ?
It've got error when I burned these , I also have Nero 7. burned both of these DVD fine with the same DVD burner.
Any help will be great . Thank you

Hi ! why do we have remove any third party software and do many urly thing in the system to get Encore work ? Why Does Encore join to the world ,or at least easer ? I paid very high price for full version of Encore CS3 . The software creator better fix your Encore CS3 get better , it's not worth what I invested on Encore CS 3 , I give up , thank you
Things & Software to avoid when authoring DVD
BJMoose - 06:21am Jul 2, 2004 Pacific
[from a post by Neil Wilkes - last edited July 27, 2004]
There have been so many posts along the line of "I cannot burn my DVD in Encore, but Nero works well" that I thought I should share this info with you all.
As we know, DVD Authoring is very dependant on timing, and on not having other apps getting in the way & locking up the burners, So here is a list of software that is known to interfere with GEAR drivers. It is a raging cert that this also applies here, as all authoring apps are the same sort of thing.
These 3rd party apps are junk software, to be quite blunt (I expect to get flamed over this, but I cannot help the truth), and should never be installed on an Authoring system.
Anyway, here is the current list of known problem software.
1. B's Clip: This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. You will need to uninstall it in Add/Remove programs, then reboot to remove it. For more information, visit the B's website at http://www.bhacorp.com.
2. Direct CD or Drag to Disk: These are applications from Easy CD Creator from Roxio. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. To remove them you need to do to Add or Remove Programs in the Control Panel. There you can select Easy CD Creator to change, not remove. Then you must click next until it gives you the option to modify. Then either Direct CD or Drag to Disk should be selected and changed to "make this option not available". Then click next and while the program may look like it is installing, it is removing those options. One thing to remember is that both Direct CD and Drag to Disk will not be installed at the same time. For more information, please visit Roxio's website at http://www.roxio.com/en/support.index.jhtml
3. GoBack: backup software that constantly runs in the background (Terminate and Stay Ready) this needs not only to be turned off, but disabled. Unfortunately, this may cause some restore points to vanish, but it will free up a lot of hard drive space. For more information visit Symantec's web site for GoBack at http://www.symantec.com/goback/index.html
4. DLA: Also HP-DLA, Veritas DLA, and others. DLA stands for Disk Letter Assignment. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. You will need to uninstall it in Add/Remove programs, then reboot to remove it.
5. InCD: This is packet writing software that comes bundled with Ahead Nero Burning Rom. This package will load a packet-writing software that will constantly talk to your CD/DVD writer, and can cause a number of issues while trying to write a disc. Disabling this software is not enough, as a portion of this package is always running after you start windows. You will need to uninstall it in Add/Remove programs, then reboot to remove it. For more information go to Nero's website at http://www.nero.com/en/
6. Interactual Player and PC Friendly Player: These programs are DVD software viewers that often come on DVD movie discs, and will try to install themselves everytime you watch a movie on your computer. Please make sure to NOT let these install. Both programs interfere with all DVD Authoring software and should be un-installed from Add or Remove programs in control panel when found. In some cases, you will need to uninstall and reinstall your software to restore functionality after removing one of these. For more information about both players, visit http://player.interactual.com/
7. McAfee Anti-Virus: This is anti-virus software that when running, can cause errors. It needs to be disabled by right clicking on the icon in the lower right side of the task bar. Your DVD Authoring software then needs to be restarted. Whenever you are using your software, McAfee needs to be disabled to ensure unrestricted access to your drive. For more info go to McAfee's website at http://us.mcafee.com/default.asp
8. Norton Anti-Virus: This is anti-virus software that when running, can cause errors. It needs to be disabled by right clicking on the icon in the lower right side of the task bar and the automatic updates should be disabled. Your DVD software then needs to be restarted. Whenever you are using your software, Norton needs to be disabled to ensure unrestricted access to your drive. The Norton Website is http://www.symantec.com/
9. StopZilla: StopZilla can hinder required portions of various installers, causing the software to fail. Please completely disable StopZilla, then install your software. Once our software is installed, you may safely enable it again. If you have any difficulty using your software at a later time, you may need to disable StopZilla before going to use your software. Uninstallation is not required.
10. MyStorageGuard: This backup software can hinder certain required files from being copied during the installation. Please disable this program before installing , and have it disabled any time you go to use your DVD Authoring software. Uninstallation is not required.
11. Napster 2.0: This software includes some basic burning software that can cause burning problems if it is running. You will need to close this program completely before trying to use DVD Authoring software. In some rare cases, you will need to completely uninstall this package to attain full reliability, so if disabling does not solve your issue, please try uninstalling this software, and try again.
12. Easy CD Creator 4.x: Due to the age of this package, it is no longer updated by the authors. There are bugs present in this older system that will cause NUMEROUS problems on your machine. Please Uninstall completely, and consider either the new 6.x version from Roxio ( http://www.roxio.com ) or Nero 6.x ( http://www.nero.com ). These packages, installed without the Packet Writing software (DirectCD/Drag to Disk/InCD), all work very well with DVD Authoring software.
13. Spyware and Adware - some programs can install other software that can be damaging to your Operating System. Please scan for these programs with a Spyware utility. We recommend Ad-Aware, available freely at http://www.lavasoftusa.com
14. Disable the Windows XP packet writing utility. To do so, go to My Computer, Right click oon your DVD burner, choose Properties. Find the "Recording" tab. Uncheck "Enable CD recording on this drive" While you are there, switch off all AutoRun options too. It means going through each option and then selecting "Take No Action" as the default option. AutoRun will "poll" the drive every few minutes to look for a new disc, and if it finds one it will try to open it.
15. Symantec PCAnywhere has been reported to cause problems with Encore as the awvid5.dll file it installs is a video driver designed to facilitate the transfer of screen information from one computer to another. Sadly, this causes a conflict which can cause XP to restart - or give a bluescreen if the "Automatically r

Getting Ripped DVD Video and Audio Into Encore

Do you have previously authored DVDs that need rework? Do you want to add menus with greater impact and functionality? Do you want to add some additional program or supplemental material? Does a client want their product demo DVD to be updated to reflect the capabilities of the new and improved version, but the source files no longer exist? Using Adobe Encore DVD and a freeware utility called DVD Decrypter (DVDD), you can accomplish this quickly and easily.
Disclaimer: I do not support the illegal copying and/or distribution of copyrighted works. The authors and distributors of the software I use have made it clear that they do not support illegal copying. This guide is intended solely to assist you in ripping and copying DVD video to which you have the legal rights. Any use of this guide to infringe the copyright of someone else’s intellectual property is prohibited.
This guide is based on Adobe Encore DVD 1.5.1 and DVD Decrypter version 3.5.4.0. Let’s Begin!
Place the DVD to be ripped in your DVD drive and launch DVDD. If you have more than one drive (e.g., a DVD-ROM and a DVD burner) make sure the one with the disc is selected in the Source dropdown list in the main program window. Now we need to set up DVDD to extract video in a way that is “Encore friendly”. This is the toughest part of the whole exercise. Click on the Tools menu item and choose “Settings…”.
Settings
General Tab: You can leave these set at their defaults if you like. Personally, I specify a custom Default Destination. I put my ripped video assets all in one place anyway, and having a default destination means I have one less thing to do when I rip a DVD.
IFO Mode Tab: Make sure that “Select Main Movie PGC” and “Enable Stream Processing” are checked. “Uncheck Suspect Cells” is probably a good default safety check. If your hard disks are formatted as NTFS, set File Splitting to “None”. I leave “Copy IFO File” checked with the default sub-items checked. Make sure that “Patch M2V Timecode” is unchecked. The items in the Create Additional Files section are purely optional. The author of DVDD has been kind enough to list which programs need which files; notice that Encore DVD isn’t listed as needing any of these extra files. I do keep the “Stream Information” box checked. DVDD generates very informative file names, but I like to keep “Include PGC Number” under File Names checked. Be advised you will get some lengthy file names after DVDD is finished ripping.
Stream Processing Tab: Since we enabled stream processing in the IFO Mode tab, we need to tell DVDD how to process those streams. To save yourself time and confusion later, check the “Convert PCM to WAV” box. Earlier versions of Encore required a Demuxed audio stream and a Raw video stream. Encore 1.5.1 can accept either type of video stream (Raw or Demuxed) but it does still require a Demuxed audio stream. However, I still recommend using Raw video and Demuxed audio, if only because it seems to be somewhat faster to process in DVDD. This workflow is also backward-compatible with earlier versions of Encore.
So let’s set up the Stream Processing tab now. In the Demux box, enter “0x8? 0xA? 0xC?”. This ensures that all audio streams in the selected PGC, whether AC3, PCM or MPEG will be set to Demux. In the Raw box, enter “0xE0”. This ensures that the video from the selected PGC will be set to Raw.
Additional Notes about the Stream Processing Tab:
1. For those of you asking the question, “What the heck is a PGC?” it’s just DVD-speak for the titles in a DVD project. And I’m not talking about the opening or end credits, either; I’m talking about the titles that result, for example, from the timelines you create in an Encore DVD project. There is a subtle difference between a PGC and a VTS (title set), but that's not important right now.
2. Happily, recent versions of DVDD create a WAV file after ripping that will import directly into Encore. Versions prior to 3.2.0.0 would create a WAV file that had to be imported to, and exported from, a sound editing program like Adobe Audition, Goldwave or SoundForge before Encore would recognize it.
Events Tab: For convenience sake, I recommend setting “Set Program Mode” in the Startup section to “IFO”. That way, whenever you launch DVDD, it will look familiar to you. You may safely ignore all of the other tabs in the Settings dialog.
Ripping
1.Under the Input Tab of the main program window, select the PGC you want to rip. You can only do one at a time.
2.Switch to the Stream Processing Tab. Verify that Enable Stream Processing is checked.
3.Check or uncheck any or all of the video and audio streams that are listed. Highlight each one to verify that all audio streams are set to Demux and the video stream is set to Raw.
4.If you didn’t select Default Destination in the General Settings Tab, then you need to tell DVDD where to put the ripped files now.
5.Click on the big DVD-to-Disk icon.
6.DVDD will announce, quite loudly, when it has finished. At that point you can rename the files or import them as is into Encore.
I hope you find this guide useful and that it helps you get the most out of your investment in Adobe Encore DVD.
Guide © Jeff Bellune 2005

OK, I can't tell you what we are doing, you'll have to trust me that it's for a very good cause. I'll simplify the use case as an example. If I can do the following we'll be OK:
1) Read video/audo files from a DVD that we created
2) Open these files with the QuickTime Player, click on Export to Apple TV to create an output file.
I'd rather not do an interim conversion of the video data (like use a 3rd party app to convert to mp4 first and then read into QT, but I'm considering a conversion to DV) because that could seriously hurt the apps effectiveness. I also can't use another app (MPEG Streamclip, HandBrake, VisualHub, etc.) to do the conversion.

Optical Drive is Reading CDs and DVDs & Writing CDs but not Writing and Erasing DVDs!

Product Name & Number: Compaq Presario CQ60-101AU
OS: Windows 7 Ultimate SP1
Error Msg: Shows Reading Error at the end of burning DVD using Cyberlink Power2Go 5.5, Nero 11, Ashampoo Burning Studio 11
Description:
When reading and writing CD+R, everything works perfect. And Reading DVD also working perfect. The problem is while Writing DVD+R, DVD+RW and Erasing DVD+RW. When using burning software or the windows in-built burning, at the end it shows reading error. And While erasing also same problem. In the DVD, there are only some dark circles/lines with gap and doesn't look like normal written DVDs.
Steps tried out (but in vain)
1. Used different burners
2. Used Superblank
3. Uninstalled and Reinstalled Chipset drivers
4. Formatted the whole HDD and Reinstalled OS
Please Help! Actually where is the problem? And how to fix it?
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! **

Either go directly to Intel and run their driver finder or use this thread.
http://forum.notebookreview.com/hp-drivers-software-forum/404164-drivers-hp-dv6-2xxx-dv7-3xxx-dv8-hd...
The bloat-ware if you want it :
http://forum.notebookreview.com/hp-drivers-software-forum/519991-popular-hp-notebook-software.html
Install the Chipset driver first, then the Intel Rapid Storage Technology Driver, the rest doesn't matter.
Same for the NVIDIA driver, Notebook Review is up to date or you cab go directly to NVIDIA.
http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
http://www.geforce.com/drivers
And the tutorial to do a clean install to W7.
http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
If you have an upgrade disc, then you can do a clean install as long as there is a Windows OS on the drive.
I have also done a clean install form an upgrade disc to on a new drive and it still works.
Glad the MoBo's doing well ! What kills them is if you do allot of gaming, the MoBo can't take the heat. The cooling system just isn't up to the task.

A dvd will not eject from my brand new IMac. I have done every suggestion in the help area. Any suggestions on how to get this DVD out of the computer?

My brand new IMac will not eject a DVD. I have tried everything that was suggested in "help". It didn't recognize the dvd, and whenever I try to eject it, it is not highlighted. I have tried to restart while holding the track pad, and nothing happened at all. The dvd is from the library...so it needs to be returned! Any other suggestions?

Have you tried all of these?
1. Pressing the Eject key while opening the iMac.
2. Pressing the Eject key while closing down the iMac.
3. Holding down the Option key while restarting the iMac.
4. Using Disk Utility to try to Mount, Repair and Eject the disk.
5. Holding down the Mouse while restarting the iMac.
6. Pressing the O and F keys while closing down the iMac.
7. Opened Applications > Utilities >Terminal and typed in 'drutil tray eject'.

Internal and External DVD players keep ejecting DVDs

i have a G4 500mhz AGP mac (upgraded to a 1.6ghz processor via a NewerTech card) with an internal CD/DVD player (not burner) and i have an external LaCie CD/DVD burner (the LaCie CD/DVD burner is only about 4 weeks old and i've burned maybe 8 to 10 DVDs on it)
i have had NO problem reading any DVD disks until just about a week ago.. i had bought a new Graphics DVD and it worked the first time i put it in the DVD player... the second time it would not work... (((this was the start of the problem of the purple-ish DVDs not mounting))) so, i thought i had just bought a faulty DVD, they replaced it and the new one still will not work at all.. the DVD will NOT work in my internal DVD player AND it will not work in my LaCie external DVD burner/player...
the internal drive just spins for a few minutes and the kicks the DVD out... the external LaCie drive spins for several minutes, then i finally get a message saying the disc is not readable.
what i have noticed is that any DVDs i put in will mount as long as they have a silver surface.... if the surface is purple-ish color, those are the DVDs that will not mount and keep ejecting
even DVDs that i have burned on the external LaCie DVD burner will not mount in the internal drive OR the external drive...
as i said, all of the DVDs that will NOT mount are the one's with a purple-ish surface... maybe that has something to do with the problem....
something must have happened somewhere because these purple-ish DVDs did used to work... i even did a brand new install of OS X.4 on a totally seperate hard drive and these purple-ish DVDs STILL would not work...
even booted into MacOS 9.2.2 and the STILL would NOT mount....
ANY info would be helpful...

i now KNOW that there is NOT a defect with the LaCie DVD/CD burner and there is not a problem with the purple-ish DVDs, but it is HAS TO BE something with the Mac or MacOS X software because i took the LaCie drive and connected it to my WindowsXP machine and ALL the purple-ish DVDs that would not mount on my mac computer WILL WORK on with the LaCie drive connected to my XP machine...
any suggestions are appreciated.....

Why does iDVD keep giving me a multiplexing error and ejects my DVD?

I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
dennis

Hi
Multiplex Error - is one of the most complex error to run into - can be so much
see (especially new info at end of list)
MULTIPLEX ERROR !
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

Encore 2.0 Audio and DVD Player Compatibility

Hello
I've made about 200 dvd's for a dance recital I've edited. This is my first year using 2.0 and have already had 2 people come back saying all they can hear is the applause track, and no music (in premiere, I had an audio timeline with just music from the soundboard, and one timeline for a stage mic to catch tapdances and applause). Once premiere renders the audio, I assumed it would all become one track in encore, which it appears to be. I looked in the settings, and it appears to have defaulted to dolby audio. Is this going to be a big problem? I'm not sure what encore 1.0 defaulted to for audio. I've tested my dvd's on my own stand-alone dvd player and it works fine.
Thanks for any input.

Thanks for writing back. I did burn at 4x, and used TDK media (which I assumed was ok)...in the past 2 years that I've done this project, I used encore 1.0 with no problems (other than the standard +R vs -R problems).
I'll check the data rate, but I think it was well below the 7,000 level. I was just curious as to why certain dvd players would screen out the main track?..which is odd since there are only 2 assets in the project (besides menus) "audio" and "video", one each on the main timeline. How do you output your videos in encore 2? Do you use pcm or dolby digital?
Thanks again.

Eject DVD script and map to eject key?

Could someone instruct me on how to create an eject script to open my SuperDrive DVD tray and map it to the "Eject" key? I need a powerful programming solution here and I don't mind opening some sensitive system files if necessary.
For some reason my aluminum keyboard "Eject" key will not work and the menu extra (eject.menu) turns blue and freezes. However, dragging a CD/DVD to the trash works fine, disk utility works, itunes works and toast works. OS X 10.5.5/6 does not work.
I'd like to be able to command my DVD drive to open when I need it.
Thanks

Thanks for your help, but I did an archive and install less than a week ago because I had trouble with the 10.5.6 update. All seems fine now except the Media Eject Key. Oh, I also tried a 2nd Aluminum keyboard from a new iMac, and I tried an older white keyboard from a G5 iMac.
This is becoming very weird. Nothing seems to be working. Even eject.menu (menu extras) only works a couple times and then turns solid blue and freezes. I have repaired permissions many times and between every updater and restart along the update path back to 10.5.6. No abnormal problems detected. Also ran DiskWarrior from another hard drive. Oh... and started up from a second drive with 10.5.5 and still will not open!
I have even reflashed my DVR-115D back to 1.18 as normal (down from 1.22) and that didn't help either. I know it's not the drive because all other programs and terminal can open it no problem.
Only thing left is a firmware issue or keyboard interface coding. Anyway to force the keyboard firmware 1.0 to re-update? I tried to rerun it but it says already updated.
Maybe if I zap the Pram??????? Haven't tried that yet.

Encore 5.5 Check Project Issues and Adobe Help

Ok, so I am fairly new to Encore and my years of experience with DVD Studio Pro gibve me some insight into DVD design and Menu construction. However, trying to follow the logic in the Encore workflow is very frustrating. For example, I run the Check Project Panel to see where problems in my DVD authoring and construction have hit a snag. The problem is the Check Project Panel, although it opens a Properties Panel that Panel does not show a specific location of the issue. For Example:
Check Project shows:
Button Menu Item 1 (Problem) Link Not Set
In The PROPERTIES Panel it lists
NAME: Menu Item 1
Number: 12
Type: Normal
Link: Not Set
How, from this information, can I locate the button in question. I If in the CHECK PROJECT panel it indicated the location of the button, which menu, then OK I can locate it. Or, if in the Properties Panel the Button Location as to which menu is in question then OK I can locate it. But there is no Menu description. Instead you have to go through each Menu to locate the item. When working on a production deadline, such issues waste time. In DVD Studio Pro these issues did not occur. Although Encore allows alot of creativity, DVD Studio Pro, even the last version, is superior to Encore in my opinion. It is no wonder that over 70% of production houses preferred FCP to Adobe. Here's an idea for the Encore engineers, create an automated section where alot of traditional authoring issues are automated (BTW your Library of Menus are pretty bad in my opinion) so that it is easy to import a 35 chapter project and have it automatically set up a 4 or 5 menu page DVD and link all the chapters and Previous and Next buttons as well as the navigation of the buttons. Your current version wastes too much time and the Adobe Help is like being handed the text book and having to read the entire set up theory rather then link to specific issues. All of this for Standard DVDs not Blue Ray.
I have already received an apology from Video2brain.com regarding an incorrectly placed reference in Adobe Help i.e. "We'll be working w/ Adobe Help to get that description changed for that particular video, since it doesn't cover color correction in nesting sequences." In this particular case Adobe Help sent me to a Premiere Pro reference where the video explained the basics of Nested sequences but did not cover the specific issues I had and was seeking a reference for. Such poorly designed reference points added to the lengthy explantions one has to read through for Help, makes Adobe Help almost worthless. By comparison Apple references were very clear and to the point, in most cases. It seems that although Adobe Encore and Premiere have some very nice features, but they don't make up for some very big holes in this product.
Again this is my intial impression of Encore and Adobe Help from a former FCP/DVD Studio Pro user.

I have not used DVD Studio Pro, but it has sounded like this is simpler there.
To be sure we are talking about the same Encore workflow, see "chapter index" and "multipage chapter index."
http://help.adobe.com/en_US/encore/cs/using/WS185296FB-D1BB-4d52-ABC4-316DF795FD05.html
http://help.adobe.com/en_US/encore/cs/using/WSf01dbd23413dda0e-3ea68760123ebe30b7c-7fff.ht ml

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Encore cancels DVD writing and ejects?!?! Help!

Similar Messages

Maybe you are looking for